Share Screen during presentations

I'm looking to the community to see if anyone else can replicate an issue we are seeing.
Steps to replicate:
Open Remote Desktop (tested with both 3.8 and 3.7.2)
Use the Manage... 'Share Screen' feature to present your display on at least one other client. (Your screen shows on the client now)
On the admin system, open PowerPoint or Keynote and create a default presentation. Create one slide with some sample text. Present your slide-show full screen.
Within 2 minutes, the ARD ForcedView client will crash and return to the desktop on the client.
You can cancel the screen sharing task and re-connect and it will start up again, and crash within 2 minutes.
All test systems are running Mavericks (10.9.5)
The version of the admin Remote Desktop doesn't seem to matter.
Clients which are running ARD 3.7 do NOT have this problem. Only clients which have updated to 3.8.2 update are showing this problem.
We have tested with a variety of Mac hardware, and even different buildings with different network setups with the same results.
Can anyone else confirm this behavior?

I have also test with Yosemite on the client system with the same results.

Similar Messages

  • Project something on the bottom of the screen DURING a Keynote presentation?

    I need to be able to project something on the bottom of the screen DURING a Keynote presentation. Is that possible? At our church we have a numbering system for parents/kids and occassionaly we need to project the number so the parent can go check on their child. How can we do that during an active Keynote presentation?

    I use;     Ink2Go

  • I'm getting the grey screen during start up and can't boot the computer. I did a cmnd R but worried it would automatically wipe my hard drive and reinstall OS.  Is there a risk at cmnd R will result in wiped HD without me actively making that choice?

    I'm getting the grey screen during start up and can't boot the computer - MacBook Pro with lion.
    I did a command r after doing some research but got nervous that it would automatically wipe my hard drive and reinstall OS.
    I was nervous because it asked me for language for software use before any options were presented (such as repair via disk utility). It looked similar to an OS install.So I powered off....Is there a risk at command r will result in wiped HD without me actively making that choice?

    Repair the Hard Drive and Permissions - Mavericks, Lion/Mountain Lion
    Boot to the Recovery HD:
    Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    Repair
    When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported then click on the Repair Permissions button. When the process is completed, then quit DU and return to the main menu. Select Restart from the Apple menu.
    Reinstall Mountain Lion or Mavericks
    OS X Mavericks- Reinstall OS X
    OS X Mountain Lion- Reinstall OS X
         Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is
                    three times faster than wireless.

  • Show Cursor During Presentation with Trackpad.

    Using Keynote only, and not any external applications, how does one display an arrow on-screen during the presentation? I don't have a mouse, just trackpad.
    Thanks in advance!

    Go into the Preferences, choose the SlideShow tab, and you'll see this window.
    http://www.boinx.com/chronicles/2006/01/12/mousepos-and-keynote-3/
    Click the radio button for "Show pointer when the mouse moves"

  • Share Screen Cuts Off Along With Videos

    Recently, during my video calls the share screen cuts off  both webcams go out along with it. 
    When trying to turn the webcams back on they just keep circling and we would have to end the call and call back for our webcam videos to show up.
    Also the webcam video randomly gets blurry even when the connection is good and shows its still white on the connetion.
    When trying to turn the video off and back on to see if it would help it will come back clear for a few seconds then revert back to a blurry image.
    The video is normally a rectangle shape when its clear, but crops into a small square when blurred.
    Once again have to end the call and call back.

    Yes.  The MBair uses magnets to detect when the screen is closed.  When you move a magnet along the edge, the MBair thinks you've closed the screen and puts it to sleep.
    Edit:  This won't hurt your MBair.

  • My question is that if I am using Mac and another friend of mine is using Ipad mini and her skpe isnt working and we want to share screens how can we do it through Ichat? Since on facetime screens cant be shared!

    My question is that if I am using Mac and another friend of mine is using Ipad mini and her skpe isnt working and we want to share screens how can we do it through Ichat? Since on facetime screens cant be shared!

    Hi,
    You can't.
    Messages - the replacement for iChat in Mountain Lion and beyond will  do Screen Sharing  but only to the accounts it did in iChat 5 and 6  (actually it includes iChat 4 as well)
    That is to say in earlier version of iChat you could login to AIM and Jabber servers as well as enabling the Bonjour option to chat on your LAN.
    All these will do Video and Audio only chats which in turn means they will Screen Share.
    At iChat 6 an Yahoo option was added but it can only Text chat (it can't even send Files or Pics)
    This means only the Internet able accounts that login in to AIM or to a Jabber server  can Video and therefore Screen Share.
    The iMessages account will Invoke FaceTime if you use the Video icon during text chat.  (I.e. it is not Video inside the app like the AIM or Jabber accounts can do)
    NOTE.
    AIM includes Apple Issued Apple ID as Valid AIM Screen Names.
    Google Mail ID s can be used and Google Talk IDs with Messages as they run a Jabber server.
    Facebook allow you to create a Chat ID (Facebook Chat ID) which is also a Jabber server.
    9:13 pm      Tuesday; June 10, 2014
    ​  iMac 2.5Ghz i5 2011 (Mavericks 10.9)
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb (Snow Leopard 10.6.8)
     Mac OS X (10.6.8),
     Couple of iPhones and an iPad

  • Skype share screen problems.

    Hello,
    I am a old skype user. (Had multiple accounts)
    Since 1,5 year i use skype together with my girlfriend and we used to watch movies together and share screens to see things on youtube ect..
    Now, since 4 or 5 months its impossible to watch any kind of movie or video over share screen options.
    I have bought in the past (April) Premium account for skype and back than it was still working like a charm. During the summer it started to get bad but now its just hopeless.
    We can't see a movie together, the problems start right away..
    1. The screen is lagging
    2. The quality is terrible low
    What we try to solve it;
    1. Both update to the last skype version
    2. Install all updates possible for other applications to make the computer run as smooth as possible.
    3. Restart the computer -> Start a share screen session and let it load for 5 minutes or 10 minutes, no improvements at all
    I hope to get back to the time that we could see movies together over skype.
    We hope that there are more users with those problems and that someone is able to help us out.
    Since Skype Premium is not working anymore, im just paying for credit on my account.
    Can we PLEASE get back the premium with higher quality of share screen options like how it used to be?
    Well, i hope someone of customer service is responding.
    Greetings

    Hello,
    Is it possible to get someone here that is supporting skype?

  • Can't share screens with Skype Windows 8

    I can't share screens with Skype (Windows . I searched everywhere but I couldn't find a solution for it.I tried: clicking on the + button during a conversation as well as right clicking on the contact and seeking for the screen sharing button. See both screenshots in attachment.May someone please enlighten me to find the screen share function on Skype version windows 8?

    Not being able to view others share screenMy os is 8.1, I have installed the skype for desktop. I have also set, Video Settings==>Automatically receive video and share screens with anyone Yet when my friend click on share screen, I cant view his screen, whilst if I click on share screen he could. My skype version=6.11.0.102. I have also click on updates and all is latest. I also set for automatic update Able to block video calls but enable share screen
    Pls advise how can I block all video calls yet able to allow anyone to share screen with me?        

  • MacBook stuck at gray screen during start up

    Lately my 2008 model MacBook has been freezing up. When I shut it down, it starts up just fine, however, the last two times I've shut it down, it gets stuck at the gray screen during start up. The first time, I was unsuccessful with a Safe Boot, however I was successful using CommandOption+PR to reset my NVRAM/PRAM. It has been working fine for the past two days, but it froze again this evening. I tried Safe Booting, removing peripherals, resetting the NVRAM/PRAM and I even was able to repair the disk and the permissions, but still, I am unsuccessful during a start up.
    When I did try to "Perform an Archive and Install installation of Mac OS X", it said my computer was not able to install 10.5 (I run 10.6) because it did not meet the system requirements.
    As a final effort, I tried doing another SafeBoot, this time viewing the status. It has been stuck at a console screen that reads "disk0s2: media is not present...." for about ten minutes now, if that helps at all.
    Any advice on how to fix this would be highly appreciated. And yes, I have read the Gray screen article
    Zach Irwin

    Your hard drive may be damaged or requires reformatting. You might try this to start:
    Repairing the Hard Drive and Permissions
    Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger, Leopard or Snow Leopard.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. Now restart normally.
    If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
    If you still are unable to restart or if DU cannot repair the drive or the SMART status is not "verified" then you can try reformatting the drive to see if that fixes the problem, otherwise you will have to replace the drive.
    Extended Hard Drive Preparation
    1. Boot from your OS X Installer Disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger, Leopard or Snow Leopard.)
    2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Partition tab in the DU main window.
    3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID (for Intel Macs) or APM (for PPC Macs) then click on the OK button. Click on the Partition button and wait until the process has completed.
    4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
    5. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
    6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
    And, you cannot do an Archive and Install of Leopard over a Snow Leopard installation. You have to reinstall using the Snow Leopard installer.

  • I am getting frequent lock-ups and blue screens during boot up. The lock ups occur during normal use and I cannot click anything or force quit. The cursor shows something is loading, but never stops. I have to use power button. Ideas?

    I am getting frequent lock-ups and blue screens during boot up on my Mac Pro.  The lock- ups occur sometimes during normal use and I cannot click anything or force quit. The cursor shows something is loading, but never stops. I have to use power button.
    I had the Mac Defender malware and I have used apple jack but still having issues.

    I am getting frequent lock-ups and blue screens during boot up on my Mac Pro.  The lock- ups occur sometimes during normal use and I cannot click anything or force quit. The cursor shows something is loading, but never stops. I have to use power button.
    I had the Mac Defender malware and I have used apple jack but still having issues.

  • Connecting to shared machines (either via Share Screen or file sharing)

    I have a MobileMe account and four computers in separate locations which I regularly need to connect between. Some are on static IP's and others are on dynamic IP's. So all of them have file sharing enabled as well as screen sharing enabled. They're also all registered in my MobileMe account. Anytime I'm in a Finder window, in the sidebar, I see Shared > (computer name) and see all the computers there. If I click on it, I'm offered two buttons, one to "Connect As" if I want to file share, and "Share Screen" if I want to VNC.
    I would say 60-70% of the time I click on either of those buttons, it doesn't work. It takes about a minute to try and connect, then says, "Connection failed to (computer name). Please make sure screensharing is enabled...blah blah blah..." (it is)
    However, 40-60% of the time if I click the same button again, it DOES work!
    Sometimes it takes several tries.
    It's really frustrating that I can't reliably connect to the other computers in the MobileMe list.
    Does anyone else see this and are there any suggestions? There doesn't seem to be any rhyme or reason to it. Trying to connect to a computer that has a static IP vs. dynamic fails with about the same regularity. So I don't think that's it.
    I also get about the same failure rate when trying to use Connect As to fileshare. So I don't think it's a VNC/screenshare-specific problem.
    I've tried using DynDNS as an alternate way to reliably locate another of my computers. It fails with approx. the same failure rate, and sometimes works upon re-attempt.
    HELP!

    Goto your System Preferences->Sharing, Then select the Internet tab.
    From the drop down menu select 'Share your connection from: Kyrocera card.'
    And in the 'To computers using' box tick built in ethernet and connect a network cable to your powerbook and the other end to your network.
    Or if you have an airport card installed share the connection using your airport.Then other wireless devices can connect to your powerbook.

  • Share Screen and Cam doesn't Work in Goup Chat,

    In in private chat 1 on 1 i can use share screen and cam but in Group chats now i can;t use them.... from what i know you can't use those if you chat with more than 9+ or something like this..... but in 2-3 you can use share screen and webcam.... but now i can't.

    same issue here.
    not sure how to debug, runnig the applet with plasmoidviewer didn't gave me anything usefull...
    btw. I'm on acer laptop and "fn + left" & "fn + right" works (with that nice brightness OSD)
    Last edited by marvn (2012-11-08 21:06:53)

  • Share Screen does not work well when wifi is turned on.

    Hello,
    I'm having a minor little problem with Share Screen among 3 machines, 2 Lion OS mac pros connected with network cable, and a 3rd mbp laptop, also LION. I use share screen a lot and I am unable to connect from my main mac pro to the 2nd mac pro (via an ethernet cable) when wifi is turned on.....actually, I can connect, but it gets stuck on the "Connecting" screen and then 10 minutes later, it connects. When I turn wifi off, then hit Share Screen, the connection and response is very fast.
    After several hours playing with Sharing preferences....I think it seems like a network thing. I have checked network preferences, and re-ordered them to prioritize ethernet over wifi, powered off all devices including router, and everything else I can think of. btw, the share screen connection from my laptop to the mac pro is fine, even when wifi is turned on on the laptop.
    A simple work around is to just turn wifi off, make my connection, then turn wifi back on. But I'm curious and would like to solve this issue. It started after my 10.7.4 client combo update and has been working fine for several months before that, so I'd like to figure it out. Any ideas?
    Thanks for all the help on these boards.

    Nevermind.
    I had a failing hard drive (not the OS drive) in one of the drive bays. A couple of days after I posted this question, the drive (which has been at S.M.A.R.T. status "failing" for 6 months completely died, at which point the computer wouldn't even turn on. After removing the drive, everything with the Share Screen works fine, both over network cable and wifi.

  • Share Screen on ARD Does not work unless the user is logged on

    Since Upgrading to Lion, I have been unable to get the Share Screen in Apple Remote Desktop fuction working from Any machine. All Clients are on the latest agent of ARD and are completely upto date.
    When i try running the task when the clients are at the login screen, They just get a grey bar at the top of their screens. So it is recieveing the share screen task but not updating the image on the client machines.
    The only alternative is to get the users to login before we start the share screen task in ARD.  The issue with this is teachers prefer to be able to put work onto the screens before the pupils have a chance to log in and mess around on the machines.
    I have tried downgrading to ARDagent 3.4 on the clients, i have also tried turning off remote management and enabling again, like some have suggested.
    It would be great if someone has found a solution to this.
    Thanks.

    To get better help sooner, post a [_Short, Self Contained, Compilable and Executable, Example Program (SSCCE)_|http://mindprod.com/jgloss/sscce.html] that clearly demonstrates your problem.
    To post code, use the code tags -- [code]Your Code[/code] will display asYour CodeOr use the code button above the editing area and paste your code between the {code}{code} tags it generates.
    db

  • After upgrading to Yosemite, I am unable to share screen with Macbook Pro

    After upgrading to Yosemite 10.10 on a 2008 MacBook Pro I am unable to "Share Screen" using my authorized user account.  It worked fine before I upgraded to Yosemite. 
    I can access "Share Screen" by "requesting permission", but of course this doesn't work unless I am sitting right by the MacBook Pro to give myself permission, which defeats my original purpose for using "Share Screen". 
    I attempted to add another authorized "Share Screen" user account, but was unable to access the list of add "Groups and Users" on the host MacBook Pro from the "Share Screen" dialog box.  The dialog box pops up, when I press "+" to add another user, but the list of users fails to appear.  I assume the list of authorized users for screen share has somehow become corrupt. 
    All other ways to access "sharing user" accounts appear to be working properly.  I can add and remove other "sharing users" without problems.  For example, I can add a new authorized "file share" user and share files without problems. 
    I ran Disk Utility in Recovery Mode and normal mode and corrected all errors, and user permissions on both machines.  I also ran "resetpassword" from Terminal in Recovery Mode and "reset" user permissions.  I am not an experienced Terminal or Recovery Mode user though. 
    I also tried turning the Firewall off, to no avail. 
    I am attempting to access "Screen Share" on the MacBook Pro via a Macbook Air 13" manufactured mid 2013 also with Yosemite 10.10, however, I also attempted with an older MacBook Air which experiences the same problem. 

    Thanks for the idea but it did not work, I do not know why it is asking me for a password which I never needed before for a guest to use the computer?  I have tried everything and I do not know which password it wants?   I do not see any option for a password for the guest account, to create one or delete one or modify it?  Maybe this bug\problem will be addressed in a future update?

Maybe you are looking for