Share Web Not working

I click the start button, becomes gray and says startig web sharing but it never starts. What can be wrong? If I close the control panel and open it again, it remains off.
Thanks for your suggestions.

Hi: This is the message I've got after restarting
/usr/sbin/apachectl restart: httpd not running, trying to start
Processing config directory: /private/etc/httpd/users/*.conf
Processing config file: /private/etc/httpd/users/+entropy-php.conf
fopen: No such file or directory
httpd: could not open document config file /private/etc/httpd/users/+entropy-php.conf
/usr/sbin/apachectl restart: httpd could not be started
The other question: I've never use it before. I was trying to test a PHP script locally and it did not work (first time I was trying to do so). Then I found out that I had to start the apache services and used this app (http://www.entropy.ch/software/macosx/php/) with not results. Then I tried to go back and I've deleted the folder they ask if I want to get rid of it but I could not delete the +entropy-php.conf file.
Diego

Similar Messages

Share calculation Not working in the report

Iam surprised not to ge the simple share calculation not working at my report.
I have a dimension and corresponding values ( measures) .I made a Total at the end of the report. and I want to calcualte share of Total to each corresponding value.
how to do this, any thougts,...
I have used calculated memebers for this, But I wan to make the percentage of the total ( which is calculated inside Tool itself)
Please help....

Prassad,
Not totally sure what you are trying to achieve but there a couple of possible solutions:
1) Total = total of all dimension members. Assuming you only have three dimension members then you should have a fourth member called ALL_DIMS or something similar. In the Share calculation template you need to specify the Total level as the basis for your share calc. This will generate the following result:
                         Revenue % Share
- All Members     600         100%
     A                  100           17%
     B                  200           33%
     C                  300           50%2) The total you are referring to is in fact a sub total and is the result of adding together only the results for A + B + C, i.e. you have hundreds of dimension members but you specifically want to see a total for just these three members. To do this create a new custom aggregate call "My Total" and add together the dimension members A + B + C - Custom Aggs are a new feature to Discoverer OLAP (Checkout Mark Rittman's excellent blog article for more information on this feature: http://www.rittmanmead.com/2006/11/13/checking-out-the-new-discoverer-101220-features/)
Then in the Share calculation wizard set the basis for your index using the last option in the list "Specific Dimension Member" and select your new custom aggregate member.
Hope this helps
Keith Laker
Oracle EMEA Consulting
BI Blog: http://oraclebi.blogspot.com/
DM Blog: http://oracledmt.blogspot.com/
BI on Oracle: http://www.oracle.com/bi/
BI on OTN: http://www.oracle.com/technology/products/bi/
BI Samples: http://www.oracle.com/technology/products/bi/samples/

Save for web not working in Photoshop element 6

Save for web not working in Photoshop element 6. I am using Mac os x version 10.5.8 Anyone know how to fix that please tell me. Thanks

I just copy the preferences from my computer for you to see what are shown about adobe
file:///Users/raymondsmith/Library/Preferences/Adobe/
file:///Users/raymondsmith/Library/Preferences/Adobe%20Illustrator%20CS2%20Settings/
file:///Users/raymondsmith/Library/Preferences/Adobe%20Photoshop%20CS2%20Paths
file:///Users/raymondsmith/Library/Preferences/Adobe%20Photoshop%20CS2%20Settings/
file:///Users/raymondsmith/Library/Preferences/Adobe%20Photoshop%20Elements%206%20Paths
file:///Users/raymondsmith/Library/Preferences/Adobe%20Photoshop%20Elements%206%20Settings /
file:///Users/raymondsmith/Library/Preferences/AdobeUM/
file:///Users/raymondsmith/Library/Preferences/AppleWorks/
file:///Users/raymondsmith/Library/Preferences/ByHost/
file:///Users/raymondsmith/Library/Preferences/CD%20Info.cidb
file:///Users/raymondsmith/Library/Preferences/CDDB%20Preferences
file:///Users/raymondsmith/Library/Preferences/cfx%23FBSxPfw
file:///Users/raymondsmith/Library/Preferences/com.adobe.acrobat.90.sh.plist
file:///Users/raymondsmith/Library/Preferences/com.adobe.Acrobat.Pro7.0.plist
file:///Users/raymondsmith/Library/Preferences/com.adobe.acrobat.sh.plist
file:///Users/raymondsmith/Library/Preferences/com.adobe.Acrobat.Uninstaller.plist
file:///Users/raymondsmith/Library/Preferences/com.adobe.Adobe%20Help%20Viewer.plist
file:///Users/raymondsmith/Library/Preferences/com.adobe.ami.installer.plist
file:///Users/raymondsmith/Library/Preferences/com.adobe.bridge2.plist
file:///Users/raymondsmith/Library/Preferences/com.adobe.mediabrowser.plist
file:///Users/raymondsmith/Library/Preferences/com.adobe.PhotoshopElements.plist
file:///Users/raymondsmith/Library/Preferences/com.adobe.Reader_ppc_9.0.plist
file:///Users/raymondsmith/Library/Preferences/com.adobe.Reader.plist
file:///Users/raymondsmith/Library/Preferences/com.aol.aim.plist

Eagle eyes web not working iOS 6

i updated my iphone 3g to ios 6, i have a problem because eagle eyes web not working, appear message that push video is not compatible

I would do as what Diavovex suggested:
Settings >>> General >>> Reset >>> Reset all Settings.
Once you have completed this, ipad will reboot, connect again to your Wi-Fi and then try to Reset imessage again. Just make sure your Apple ID and password are ok ...... try log in to Apple Store and if this is not an issue then I don't see why imessage cannot connect?
Azim

Share link not working

*** Apple really is blowing it with this Forced upgrade to Drive.
FIX THIS

I also checked yesterday and it seems things are working now. I can share documents with others. Existing links for documents from other people still do not work but at least now I can share documents with others. My work group simply created a new document for the projects we were working on and we are back up and running again.
HOWEVER, the one complaint I still do have is that it seems users are now required to log into iCloud.com in order to edit. This is a shift from the previous strategy where anyone with a link could edit the document. Not having to log in was a competitive advantage over google docs and the reason we originally went with iCloud. Now that we have to log into iCloud, some in our group want to switch back to google docs!!!!!!
I could have it wrong but I really wish they would make it so non-apple/mac/icloud users could access the documents without having to sign in.

Share Document Not Working?

Is Sharing not working? No one receives the Email invites and their entered Email address, after the invites were sent, are not listed anywhere as being currently shared. (using the desktop version which is online and shows green)

Hi,
I can understand that there are usability issue in Sharing feature. Currently, email notification is just for information. Once you share script with some one, he needs to login into Story, and then save script.
After login, the user can see notification of the shared script on the top bar in Projects view. The user then can can save the script and then can start working on the script.
Please find step by step procedures:
1. Owner (Say User1) shares the script with another user (say User2)
2. User2 received an email notification
3. User2 launch Story
4. User2 provides login and password
5. After login, user2 switches to "Projects view:
incase user2 opens "Home" Page then click on "Project" tab on the top left bar in the application
6. In the Projects view there is a mail icon, which will show all scripts (I also placed snapshot in this thread)
7. Now click on this icon, user2 can see notification of all shared scripts
8. Now user2 clicks on the script and save this script
9. Now user2 can start working on this script
Please let us know if you face any problem in this workflow. We would like to solve this problem and also try to find a way to make this feature user friendly.
Regards,
Neeraj Gupta

Share function not working

My Share function is not working. The last change I've made was to change my AOL password, however don't think that was the cause.
Any suggestions?
Thank you
Ivy

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
The title of the Console window should be All Messages. If it isn't, select
SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar at the top of the screen. Click the Clear Display icon in the toolbar. Then take one of the actions that you're having trouble with. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
Some private information, such as your name, may appear in the log. Anonymize before posting.

Share Screen not working but connecting to computer to see files does!?!!

Hi
Strange but I can see the computer I need to share screen with in my shared devices and I can "CONNECT AS" and see all my shared files but I CAN NOT share screen. It is properly enabled and share screen works with all my other networked computer.
Any ideas what gives here???!!! Thanks for any suggestions!

Same problem here, cannot login into a MacPro (10.6.4) from another MacPro (10.6.4), or from a MacBook (10.6.4), or from a MacBook Pro (10.6.4), all of them located in the same network (intranet).
As the original post, I can mount discs remotely, even ssh into the destination machine, but screen sharing (or even the simple vnc) just does not work.

Quickcam Web not working

Hello together!
Since qc-usb was replaced with gspca I have troubles with my Webcam. It's a Quickcam Web (more precisely: LEGO cam) 046d:0850 and it used to work with qc-usb. It's also listed as a supported one in the gspca files.
It is correctly recognized when plugged in:
usb 2-1: new full speed USB device using ohci_hcd and address 3
usb 2-1: configuration #1 chosen from 1 choice
Linux video capture interface: v2.00
gspca: main v2.7.0 registered
STV06xx: Probing for a stv06xx device
gspca: probing 046d:0850
STV06xx: Configuring camera
STV06xx: vv6410 sensor detected
STV06xx: Initializing camera
gspca: probe ok
STV06xx: Probing for a stv06xx device
gspca: probing 046d:0850
STV06xx: Probing for a stv06xx device
gspca: probing 046d:0850
usbcore: registered new interface driver STV06xx
STV06xx: registered
usbcore: registered new interface driver snd-usb-audio
When I try to cat from the video device I get this:
cat: /dev/video: Input/output error
dmesg now reports:
gspca: usb_submit_urb alt 1 err -28
gspca: no transfer endpoint found
Other applications (mplayer, amsn, etc.) behave similar.
My first tests on a 2.6.29 kernel months ago resulted in a Kernel Panic, with 2.6.32 it's not working "only"...
Regards,
Sven

Thank you very much. Your link (and another google search which taught me about guvcview) helped me.
After I unplugged my USB keyboard and mouse (two different devices) from my computer (no hub!) the cam started to work (note: I'm using a laptop). I'm very surprised by this behavior.
Now I need to find a solution for this bandwidth problem, because without full keyboard and mouse chatting is not very comfortable (and that's the sole purpose of this cam)
EDIT: Well... unplugging one of the two devices (keyboard, mouse) seems to be sufficient... perhaps I should learn to live without a real mouse (that's easier than without a real keyboard)
Regards,
Sven
Last edited by PascalDragon (2009-12-31 17:18:02)

Photoshop CS6 Save for Web not working

I am using photoshop CS6 (cloud) on Mac (10.7.5) and when I use the Save For Web > save, i got the following popup :
---- Adobe Save For Web Error ----
Could not complete this operation. An unknown operating system error has occurred.
I have been using CS6 for months and it worked fine yesterday before shutting done. Today morning at startup it was not working anymore.
I have tried to uninstalled and reinstalled photoshop, clear my presets, shut down/started up, repair disk, repair permissions,... without succes.
The save for web function still works in CS5.
Any help will be very much appreciated,
Raphaël K.

I found the solution (took forever to consolidate all the answers) for OS X 10.9 + Maverick. Finally!
1. Change permissions (as AOTPR says) to your User/Library/Preferences file so that your admin and user (the one you are using) has read + write permissions within the Get Info pane (command+I). You may have to add them with the sign.
2. Delete Adobe save for web 12.0 Prefs & Adobe save for web 13.0 Prefs files within the User/ Library/ Preferences folder. These may be hidden for some people, so when in a finder window, hold Option(alt) and click Go from the main top menu (keep holding Option/Alt) and click Library — the full Preferences folder should open for you.
3. Change the view when in Save for web pane in PS. If you have it in Cover Flow — it won't work. Change it to another view like List or Columns view.
Presto! Works for me on Maverick.
Thank god. It took forever to get this cleared up!!
If you have any questions, email me [email protected]

HT4775 Final cut pro tab share does not work with mountain lion V10.8

I have upgraded to mountain lion and since than the tab share in final cut pro X is not working anymore.
Any suggestions??? Thanks

Trash preferences and repair permissions in Disk Utility.
If that doesn't free Share up I'd drag app to trash, reinstall it and run repair permissions again.
Good luck.
Russ
BTW, not that it matters a lot, but this is the Compressor forum.

Save for web not working on mac

Hi Everyone,
I am giving photoshop elements 8 a trial but can't get the save for web to work. When I click File -> Save for web it does nothing?
Does anyone have any suggestions why this would be the case?
I downloaded the trial today for Mac and have installed it twice with no joy.
Cheers
Luke

Terri_F wrote:
To do this, press and hold in the cmd + opt key and go through the menu and click File<Save For Web. A dialog will come up saying something like "Are you sure you want to erase all of the preferences for Save For Web". Click "Yes" to the dialog that comes up.
I just tried this. No dialog box appeared.
I am loading the software onto my MacBook Pro now, which is running 10.6. Hopefully I can use it on that machine, though I do a majority of my work on this one.
eta: The Save for Web dialog is appearing on my MacBook Pro.
Of course, now I can't get the Loop checkbox to toggle, or the Frame Delay to change for the animated GIF I am trying to create. *sigh* Now I shall start searching the forum for a solution to that problem.
OK, I just found this:
Unfortunately this is broken in PSE 6 and PSE 8. You can tab into the frame delay box if you start above it someplace on that side of the screen, and it appears to let you change the rate, but your choice doesn't really affect the actual frame rate. The only workaround is to duplicate frame layers that you want to stay onscreen longer (so it will be changing just as fast, but not visibly).
Seriously? This is the MAIN REASON I bought PSE. To do animated GIFs. I can't believe that Adobe isn't bothering to fix this problem.

"Save for Web" not working (again)

I have reinstalled Photoshop CC and removed all "save for Web" preference files.
I receive the following error message:
"The operation could not be completed. A file or directory already exists with the same name"
Which file or directory?
Wouldn't it ask if I want to "overwrite" the file?
Running
Photoshop CC 14.2.1 x64
Mac OSX 10.9.2
Before you roll your eyes and say "Watch the video" about removing preferences files - I have done all of that, in addition to reinstalling Photoshop CC twice.
It is the second time this has happened to me in a year. Now Illustrator is also misbehaving when I try to "Save for Web".
"Save for Web" is a really important feature for me - I am a freelancer doing graphics and web.
Anybody have any Ideas? Is this a common problem? Is Adobe working on it? Is it a Mavericks problem?
Thanks...
Nachricht geändert durch arlenesey12

Okay for anybody who is interested - the ONLY thing left for me to do - and what I have done - is to create a new User account and copy all my files to the new account.
I did this by copying the files first to the "shared" folder in Users. - not simply by moving them but by copying them - Important!
There was a suggestion somewhere that you could delete the User with the problem, create a user with the same name and then reincorporate the old user data into the new account - this did not work for me.
Removing all the various Preferences mentioned in 3-4 similar posts from people with the same problem did not help.
I even contacted Adobe Customer Assistance (chat), they took over my screen and after trying the above and more, the only thing left that worked was for them to create a new User test account. This worked.
But what a botherto move everything! iTunes, iPhoto, Mail - they all have to be moved in a certain way (do your research).
Another tip - to be safe, I have kept the old account and maintained it as "Administrator" - and changed the password.
My new User (Where I moved my files to and will work out of) is not an Administrator account, and has a totally different password.
I don't believe I was "hacked" - I think a log somewhere got corrupted.

Save for web not working for .PNG?

When I slice up a .psd file and then go file > save for web and select to save the images as .png it does not work for some reason. No matter what I select it only uses jpeg. I am using Photoshop CS2.
Any suggestions?

As Zeno said, file format selection is per slice, not a global override. Select al lslices, then pick the PNG options.
Mylenium

Windows Network Shares do not work properly

Ever since installing LEOPARD (now running 10.5.2) my network shares on our Windows server are not working properly. I can connect in the office via cifs:// and the share appears. I cannot copy a file to the share. I get the following message:
"The operation cannot be completed because you do not have sufficient privileges for some of the items."
There is an icon with a size of 0kb on the share, and if I try to open it or trash it, I get a message telling me it is in use by the MAC OS. I can open a file from the share, but if I try to save it back to the share or save from an application I get a "There has been a network file permission error."
If I try to copy the file to my desktop. I get a message that tells me that I don't have permission.
If I try to connect using https:// I get a username or password not valid message. Both of the connection methods worked BEFORE I installed LEOPARD. The install was a clean install, not an upgrade. I NEED to be able to access the shares for my work. The shares are on a server running Windows Server 2003 Service Pack 2.
How can I solve this? I actually have administrator privileges on the server with my login credentials, but this does not seem to matter.

Experiencing the same exact problems here. Brand new Mac Pro on a Windows 2003 Server network. Somehow I don't think it is any rights problems in my case, as I can create and erase folders (created by me or others), and the Mac writes the .DS_Store files to the server...
However, if I try to copy a single file or a folder containing files to the server, I get only a 0k file (inside the folder if I copy a folder) and after a while an error message saying the same things William Colvin2 mentions above (not sufficient privileges).
Everything I have read seems to indicate that there is huge problems with Leopard with regard to this, and if that is true, they need to be fixed ASAP. I think I've tried and tested all the possible "solutions" (disabling SMB digital signature, GPO policies, disabling IPv6...) but still no solution in sight.
Can we get some info from Apple on this whether it's being worked on, or what we can do to SOLVE this problem? As far as I know, Windows 2003 Server hasn't changed in that respect recently, whereas OSX has gone from 10.4 Tiger to 10.5 Leopard...
Any help with solving the problem is greatly appreciated, so feel free to respond with anything that might be helpful. I would also be interested in hearing from people who have HAD this problem, but has gotten them solved. And if so, what solved it for you.
Thanks in advance.

Share Web Not working

Similar Messages

Maybe you are looking for