SharePoint 2007 Integration

Hello all. Can any of you tell me if Novell Groupwise 7 can be integrated with SharePoint 2007? If so, do you have any related documentation. Thanks

* SABisram,
the MS "integrator" told us Sharepoint can use GW as an SMTP server, that's pretty much all. It can also use LDAP to integrate with eDir instead of AD. As you can imagine, MS didn't put too much effort in such 3rd party integration.
Uwe
Novell Support Connection Volunteer SysOp
Please don't send me support related e-mail unless I ask you to do so.

Similar Messages

Installing SharePoint 2007 Integration Kit on BO XI R2 SP5

Hi there,
We are trying to install sharepoint 2007 integration kit but keep getting the error message:
"SP3 patch is required to install the sharepoint 2007 integration kit"
Our setup...
SharePoint 2007 running on its own Windows 2003 server
BusinessBojects Enterprise XI Release 2 Support Pack 5 running on its own Windows 2003 server
We installed the .Net SDK and Web Componet Adapter (WCA) of BusinessBojects Enterprise XI Release 2 Support Pack 5 on our SharePoint server
Now, both versions of .Net SDK and WCA are the same on BO and SharePoint as required
However after two attempts of installing the PIK we still get the message
"SP3 patch is required to install the sharepoint 2007 integration kit"
Does anyone know what is requried here?
Thanks,
Bernard.

Hi Amit,
Thanks for your response. I am not 100% sure of the answer to question 1 as we had someone external patrhing our servers and attempting to install the PIK. But I have detailed below the Crystal related products that were put onto the SharePoint server:
1)
Crystal Reports Server XI
Crystal Reports Server XI R2 Service Pack 2
Crystal Reports Server XI R2 Service Pack 5
Crystal Reports Server XI Release 2 .NET 2005 Server
I think he could have selected just the .NET SDK and WCA components from the main install and got to SP5 that way.
2) The PIK I believe is to be SP2 from looking at the setup.ini file
Msi=win32\cesp2k7.msi
ProductName=BusinessObjects XI SharePoint 2007 Portal Integration Kit
MsiMajorVersion=2
MsiMinorVersion=0
MsiBuildNumber=2600

Does the BO Sharepoint 2007 Integration kit work with Sharepoint Serv 3.0?

Hello,
I have seen several posts about this topic but I still have not come to a correct conclusion. I have Windows Sharepoint Services 3.0 and BO Crystal Reports Server XI R2 SP3. The getting started documentation for SP3 specifically says the portal integration kit can be used with "MS Windows Sharepoint Services or Sharepoint Server 2007". However when I try to install the the integration kit I receive an error "Microsoft Sharepoint Server 2007 is required to install the Microsoft Sharepoint Integration Kit".
Is this true? Do I have something setup wrong or is the documentation incorrect and only Sharepoint server 2007 is supported?
It shows WSS as compatible in this document http://www.businessobjects.com/pdf/solutions/microsoft/bo_microsoft_interoperability_final.pdf
Any clarification would be helpful as I have wasted 1+ days trying to figure this out. I just need to know if Sharepoint services and the Sharepoint integration kit will work together with Crystal Server XI R2 SP3.
Thanks,
Ryan

Hello Ryan,
I recommend to post this query to the [Integration Kits - Other|BusinessObjects Integration Kits; forum.
This forum is dedicated to topics related to the other BusinessObjects Integration Kit.
This forum is dedicated to topics related to other BusinessObjects Integration Kits, including Siebel, Baan, PeopleSoft, and JD Edwards.
It is monitored by qualified technicians and you will get a faster response there.
Also, all SAP Kit queries remain in one place and thus can be easily searched in one place.
Thanks a lot,
Falk

OpenSSO 8.0 sharepoint 2007 integration problem

Hi,
when i typed the sharepoint url its redirecting to opensso and when login in opensso the http 401 internal server page error giving and in agent log file invalid session and http 401 internal server giving.
please kinldy give any one solution for me in successful of this integration.
thank u.
Ramesh

I got rid of the deployment error message by including the necessary jar in WEB-INF/lib (which was missing in the original sample).
I can now run the sample, but I don't think it is working correctly. The SOAP messages are exchanged, but without any SOAP security headers. In other words, both the wsc and the StockAgent OpenSSO profiles are set to generate SAML2-SenderVouches, but none is generated.
The only security provider that seems to get engaged is FAMHttpProvider (because I get a login prompt if I select "User Authentication Required" in the StockService agent profile referenced by FAMHttpProvider).
If I activate the SOAP providers XWS-Client and XWS-Server, the bodies get signed with X509 certificates, which is not what I specified in the OpenSSO profiles. The OpenSSO profiles seem to have no role in the SOAP security headers being generated.
Any suggestion of what might be missing?
Thank you,
Ugo

Upgrade SharePoint 2007 SSRS integrated mode to SharePoint 2013 Reporting Service (SSRS-2014)

Hi
We are upgrading a SP-2007 site with SSRS integrated reports to SP-2013 and SSRS-2014. As there are many changes done in SP-2013, I would like to know if any of the existing SP-2007 reporting service database need to upgraded to SP-2013 or just upgrading
the SP-2007 content database to SP-2013 and creating a new Reporting Service application will be working fine?
Thanks,
Pat

You'll want to do a few things:
Export the encryption key from the SSRS Configuration application in SharePoint 2007.
Migrate the content database from SharePoint 2007 SP2+ to SharePoint 2010, to finally SharePoint 2013.
Install SSRS 2012 SP1+ on SharePoint 2013.
Migrate the SSRS databases to the SharePoint 2013 SQL Server.
Create a new SSRS Service Application in SharePoint 2013 using the same named databases on the new SQL Server.
Import the encryption key to the SSRS SA.
http://msdn.microsoft.com/en-us/library/jj219068.aspx
Trevor Seward
Follow or contact me at...
&nbsp&nbsp
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

Duplicate appSettings section using SharePoint 2007 Portal Integration Kit

We have installed the BusinessObjects XI Release 2 SharePoint 2007 Portal Integration Kit on a MOSS server and are successfully viewing reports in SharePoint.
But, when we ran the SharePoint Products and Technologies Configuration Wizard, the appSettings section of the web.config with only the Business Objects settings within gets duplicated. This causes all of the SharePoint sites which use BO to go down becauase of the duplicate appSettings section.
Have you seen this behavior and is there a newer version of the integration kit available which may repair it?
Thanks,
Eric

As mentioned earlier we will have a native 64bit support for SharePoint 2007 64bit, probably next year.
It would be enhanced version of SharePoint 2007 PIK with functionalities at PAR with .NET infoview.
I will like to put a disclaimer mentioning that plans are subject to change

Integration Option for SharePoint 2007 and Edge?

Does this support Edge 3.1? I know that in the official documentation for the Sharepoint 2007 PIK it never said Edge was supported, but I see posts indicating people have gotten it to work with Java InfoView.
However, is Edge 3.1 supported for the larger Integration Option for SP2007? Also, I assume it would be only for Java InfoView since Edge utilizes a WACS vs. standard .NET SDK.
Please advise.
Edited by: Jay Riddle on Oct 6, 2009 12:14 AM

The newest release of the sharepoint kit called internally (ipoint) should work fine with java infoview. I haven't set this up my self and you may need to open an incident with support to verify if Edge supports the newest sharepoint kit.
Regards,
Tim

Will Sharepoint 2003 Integration Kit work with MOSS 2007?

Post Author: nicolespag
CA Forum: General
I'm currently viewing Business Object reports in my Sharepoint portal using the Integration Kit for Sharepoint 2003. However I've recently upgraded Sharepoint 2003 to MOSS 2007 and I'm wondering if the integration kit will work with the newer version of Sharepoint.
Thanks for your help!!!
Nicole

Post Author: tb262
CA Forum: General
The good news is that the new PIK compatible with SharePoint 2007 has been officially released as part of BOE R2 SP3. The bad news is that I have not figured out how to install it! SP3 installs from downloaded files automatically and does not extract installation files for the PIK. Previous installs of the PIK involved running the setup.exe for the PIK located in the Add-On's (or similar) folder of the BOE install files/media. No such luck with SP3. I have an open support case on this and will hopefully have more info soon.

Oracle Access Manager - Sharepoint Portal Server 2007 integration

Does anyone know a proper documentation link for OAM-Sharepoint portal integration. We have followed pretty much the same steps provided on OTN site. No luck, integration is not working.
Our OAM is listening to OVD for the user data which at the backend is pointed to AD whereas sharepoint is listening to AD for authentication.
we also tried custom http module to read the headervar and authorize the user (steps provided by asp .net - siteminder integration). It was authenticating the user, but some links were missing and when clicked on peoples and group link it says access denied for this user. Dunno where exactly we are doing wrong.
Does OAM which is listening to OVD for user data supports OAM-Sharepoint integration?
Any help on this would be much appreciated.
Thanks!

Since you are getting "Welcome unknown" then there's definitely something wrong with the configuration you have done for the integrated windows authentication and impersonation. It has nothing to do with the user store, OVD should work perfectly fine.
If you are using 10g I suggest you
1. check the event viewer to see if your impersonation is working correctly. you should see logins to the system by impersonation user as well as the user you are trying to login with. See http://download.oracle.com/docs/cd/E12530_01/oam.1014/e10356/shrpprtl.htm#CHDFGBFC
2. check if you have given all the necessary permissions to the impersonation user. See http://download.oracle.com/docs/cd/E12530_01/oam.1014/e10356/shrpprtl.htm#CHDHGIJA
3. Test the impersonation on some other site on IIS rather than Sharepoint
Once your impersonation works you would have all the accesses which that user is entitled to in the Sharepoint.
Hope this helps,
Sagar

Integration SAP iView in SharePoint 2007 IViewWebPart

Hi All
I have a problem with using SharePoint 2007 IViewWebPart. I configured trusted SAP hosts and I do not know what to write in the <SsoAuthentication Name="<MySAP>"/> element. SsoAuthentication Element specifies the SSO application to use when authenticating to the SAP Server. I tried the following: SAP, xApp, xApps and some other but it does not work. I have the following error:
"The single sign-on application associated with this IView is not found. Contact your administrator to correct this problem".

Hi Svetlana,
See these article if it helps-
https://www.sdn.sap.com/irj/sdn/weblogs?blog=/cs/user/view/cs_msg/16352%3fpage%3dlast%3bx-showcontent%3doff%3bx-maxdepth%3d0
http://www.microsoft.com/technet/windowsserver/sharepoint/V2/reskit/c2661881x.mspx#ENF
Regards.

Sharepoint 2007 - Creating a form to capture timesheets data, but need to track updates to previously submitted data

Hi,
We are using a basic version of Sharepoint 2007 and do not have access to InfoPath. I have created a list to allow team members to submit their weekly time on specific activities. How do I go about tracking any changes to previously submitted data?
For instance, a team member enters 5 hours for Activity 1 and submits on April 1. on April 10 they realize they submitted too few hours and want to go in to edit the 5 hours to 12 hours.
From a reporting perspective we already pulled a report (export to excel) and have the 5 hours listed for April 1. If the user goes in to edit their time sheet from April 1, we don't want the data to just override the 5 hours, we want some sort of flag to
show the hours went from 5 to 12 hours. How do we do this?
As a work around, I added a question at the beginning of the survey/list asking is this a new submission or an edit. I thought if they select edit and were taken to a screen that allowed them to select the date (April 1), the activity and the new hours that
I would have all of the previous data plus these 3 columns with the additional data: "Edit", "Activity 1", "12". Instead the original data was over written and all I show are blanks for the previous questions and the edited
info ("Edit", "Activity 1", "12").
What suggestions do you have so that I can maintain the integrity of the original data and flag for my Project Manager which data needs to be changed in previous reports.
Thanks in advance!
AA

I think the best way to answer your question would be to create a simple form and try various submissions. Be aware that unless the e-mail system is controlled, e-mail submission is not recommended due to client configuration issues of e-mail. Your question sounds like online submission would already be something you are comfortable with. In that case you can submit form data in 3 different ways: HTML, FDF, or XML. It can also be submitted as a PDF by saving the form, but that does not sound like what you need and also gets into issues of whether folks are using Reader or Acrobat.
Also be careful (or try both) about using forms from within Acrobat and the forms created by the link in Acrobat to Designer. Once you go to Designer with the form you can not come back for editing in Acrobat. Normally you would create the basic form in a word processor or layout tool and then add the form fields in Acrobat (or Designer if that is preferred).
I will let others address the anonymous and yet confirmation check issue.

Problems opening PDFs from SharePoint 2007 with Acrobat X Pro

We are currently migrating to Windows 7 x86, Acrobat X Pro, and Office Pro Plus 2010 SP1. Our old setup is Windows XP, Acrobat 8 Pro, and Office 2007. We are using SharePoint 2007. On our older machines, we are able to open and edit PDFs without any problems. However, on our newer machines with Acrobat X, we get this error whenever we open a PDF for editing:
The document could not be opened for editing. A Windows SharePoint Services compatible application could not be found to edit the document.
All of our XP users can open and edit documents without any problems--only our newly migrated Windows 7 users are unable to edit these documents. Is there a setting that I need to adjust in Acrobat X? I don't recall seeing any Acrobat X specific options in SharePoint configuration. Thanks!
EDIT: I was able to open and edit a PDF document using the following steps:
1. Click drop-down menu next to document and select "Check Out."
2. In the check-out dialog box, check "Use my local drafts folder." Click OK.
3. Back in SharePoint, click on document to open--click OK to message warning about malicious files.
4. Edit document, then click Save button. Close Acrobat.
5. Back in SharePoint, click drop-down menu next to document and select "Check In."
6. Confirm the check-in.
7. Redirected back to document library and the modified date and by fields are updated.
This seems like an awful amount of steps. Is there a way to make this function the same when a user edits a Word or Excel document?
Message was edited by: jprateragg
Added info under EDIT.

In Acrobat X, SharePoint Integration has been added which allows users to check-out/check-in the document from within Acrobat. Clicking the file from document library in Internet Explorer opens the file in Acrobat. The configuration that needs to be done on the SharePoint server is explained in the following KB article in section 11.1.
http://kb2.adobe.com/cps/837/cpsid_83709/attachments/Acrobat_Enterprise_Administration.pdf
Please try these and let us know if you face any problems after this.

UCM11g and SharePoint 2010 integration

Hi everybody,
I got a question if it's possible integrate Oracle UCM11g with Ms SharePoint2010. The SharePoint will be the user interface and UCM only the background storage. I found the threads about UCM10g.
Where can I find the information about integration UCM11g and SharePoint?
Thanks
MB

Hi MB,
I am also facing same problem(question). I fallowed http://www.oracle.com/technetwork/middleware/webcenter/owcs-ps3-sharepoint-wcs-wp-335282.pdf link for ingetration sharepoint 2007 with webcenterspaces in this im using PS3 webcenter suite.
have u done this.
i hope in some of link i found SharePoint 2010 doesn't webcenter spaces(ps3).
http://docs.oracle.com/cd/E21764_01/webcenter.1111/e12405/wcadm_documents.htm#BABDHCEC
Regards
Shankar

Integrate Sharepoint 2007 with Oracle Forms

Hi,
Is it possible to integrate Microsoft Sharepoint 2007 with Oracle forms 10g and above ? If so, is it the same way we integrate Word/Excel?
Please give some tips.
Regds,
noneda

Yes it is possible.
It's different than Word/Excel, it's more like integrating a website into your form, theoretically you can also exchange data between the sharepoint and Forms/Oracle database.
Tony

Authentication of live connected dashboards in sharepoint 2007?

Hi Guys,
Could anyone let me know how is the authentication of a live connected dashboard(Enterprise Authentication to Business Objects , data on dashboard is got via live office) handled when we upload a dashboard to Microsoft Sharepoint 2007. If you open the page with Dashboard, will it prompt user to enter his BO userid/password?
I installed the Portal Integration KIT that comes with Xcelsius 2008 setup files. I have added the web part assemblies to Global Assembly Cache using Xwp.dll and ICSharpCode.SharpZipLib.dll.
Will this ensure the authentication of dashboards in sharepoint page or is there any other configuration required?
Any inputs to this will be highly appreciated!
Thanks.

AB
Please share ULS log for more detail.
As for now you can check with user control appearing randomly in error if any of these contains " &#44
" code in page directive or reference directives and replace them with comma ",". Fab 40 controls do not work straight away in SharePoint 2013. you need to have install then one by one after copying them over to
new environment. User PowerShell command to Install them. Please share log detail

SharePoint 2007 Integration

Similar Messages

Maybe you are looking for