SharePoint publishing website runs wrong after several days, but return correct after reset IIS

SharePoint publishing website runs wrong after several days, but return correct after IISReset.
I have a custom solution on this publishing site, which looks up sharepoint resources, I've changed 
"List View Lookup Threshold" up to 50 in resource throttling, but this keep occurs sometimes.
could you give me some clue to solve this permanently?
Thanks very much in advance!
~Rosone

I am sure you are using BLOB cache. Try to disable it and check. I have seen this issue with BLOB cache.
Do we see some error in ULS logs and Event viewer
Use fiddler and check if there is something like 404.
Try below tool on your code
https://spdisposecheck2012.codeplex.com/
If this helped you resolve your issue, please mark it Answered

Similar Messages

  • Data lost after several days running!

    data lost after several days running
    ENV:
    Service Pack 1 for Crystal Reports for Eclipse 2.0
    Tomcat5.5
    Problem:
    There is no problem to export the report as PDF files in the first few days after i upgraded the CR4E.
    But after several days running,the problem appeared : the exported PDF file was incomplete!
    It's supposed to 3 pages,but only 1 page(the first page) exported actually.
    When i restarted the tomcat,the problem disappeared.In several days running,
    the problem appeared again...
    Code:
    reportClientDoc = new ReportClientDocument();
    reportClientDoc.open(Messages.getString("tmpltPath")+tmplt_name, OpenReportOptions._discardSavedData);     
    RptHelp  rptHelp = new RptHelp();
    rptHelp.setDatabaseCtrl(reportClientDoc);
    rptHelp.addDiscreteParameterValue(reportClientDoc,"","userName","admin");
    rptHelp.addDiscreteParameterValue(reportClientDoc,"","start_date",start_date);
    rptHelp.addDiscreteParameterValue(reportClientDoc,"","end_date",end_date);
    for(int i=0;i<6;i++){
         if(!p_name<i>.equals("")){
              rptHelp.addDiscreteParameterValue(reportClientDoc,"",p_name<i>,p_value<i>);
    String exportPath = Messages.getString("reportExportPath");
    String exportName = "test";
    rptHelp.export(reportClientDoc, exportPath+exportName, file_extention);
    File file = new File(exportPathexportName"."+file_extention);
    FileInputStream in = new FileInputStream(file);
    int len = (int)file.length();
    byte[] data = new byte[len];
    int read = 0;
    while (read <len) {
        read += in.read(data, read, len-read);
    in.close();
    response.setContentType("application/x-msdownload");
    response.setHeader("Content-Disposition", "attachment; filename="+ URLEncoder.encode(exportName"."file_extention,"ISO-8859-1"));
    OutputStream ops = response.getOutputStream();
    ops.write(data);
    ops.flush();
    ops.close();
    out.clear();
    out = pageContext.pushBody();

    What is the data? What is displaying the data (graph or chart)? What does your code look like? Why did you post a 4M image to the forum?
    NaN in the data will appear as gaps in plots.
    Mike...
    Certified Professional Instructor
    Certified LabVIEW Architect
    LabVIEW Champion
    "... after all, He's not a tame lion..."
    Be thinking ahead and mark your dance card for NI Week 2015 now: TS 6139 - Object Oriented First Steps

  • VI causes high CPU load after several days of running

    Hello,
    I have a strange problem. I have craeted a test bench control VI and it runs on five PCs, controling five test benches. All PCs have almost the same hardware, same motherboard, same CPU, etc.
    Normaly the CPU load is around 50% when I run the VI, but at one PC the CPU load climbs up to 85% after several days (maybe one week) of continuous running and the PC is almost tied up - the VI execution becomes very slow (10 times slower) and the mouse only moves very slowly.
    First I thought that the PC has a problem but the problem dissapears as soon as I stop and restart the VI!
    I don't even have to terminate LabVIEW - only my VI and then everything is okay again.
    The problem does not seem to occur at the other four PCs, but I can not tell for sure.
    The task manager says only LabVIEW causes the CPU load - swap file utilisation is little.
    Is there a way to analyze what causes the high CPU load?
    I Use LabVIEW 7.1 professional
    Operating System: Win XP (SP 2 or 3 I don't remember)
    P.S. I have no loops without wait-functions.
    Greetings Johannes
    Using LabVIEW 7.1 and 2009 recently
    Solved!
    Go to Solution.

    Do all PCs have the same amount of RAM?
    What is the memory use over time as seen by the windows taks manager. Does it increase gradually?
    An increase in resource usage if often cause by sloppy programming.
    Do you grow arrays forever or constantly resize arrays in memory? (built array, insert into array, delete from array)
    Do you often create new references and never close them?
    What does the program actually do? In my opinion, a constant 50% CPU load seems too high for my taste. It means it would not even be able to keep up on slightly older hardware.
    LabVIEW Champion . Do more with less code and in less time .

  • Firefox on Mac OS X gets spinning wheel after several days of use

    I have the latest version of Firefox, 8.0.1 and Mac OS X. After running Firefox for several days to a week or more, Firefox starts to become really slow and I would get the spinning wheel for a few seconds when I click a link or click on a field box. Then I have to reboot my computer and it is fixed for another week or so and the spinning wheel starts up again.

    What is the memory usage of Firefox when this happens?
    You can check the on the about:memory page via the location bar.<br />
    That page also has a button ant the bottom to reduce the memory usage.

  • My book package validated, and delivered, but after several days, I have not been notified that Apple has it, or that it is in the iBooks store. When can I expect to hear something?

    My book package validated, and delivered, but after several days, I have not been notified that Apple has it, or that it is in the iBooks store. When can I expect to hear something?

    Did you check in iTunes Producer if your package really imported correctly?
    While in iTunes Producer, you go to "File" and then click on "Package History", it will fetch the status on the Apple system on-line.
    I have the same problem since I have been trying to update my previsously published book, I keep getting import error messages. I tried omitting the version number and "whats new in this version" but nothing seems to work... Sent emails to Apple through the iTunes producer tool but to no avail - so far.

  • I am running Windows XP, SP3. I have tried to run Firefox 4 several times but it doesn't work properly. The main page comes up showing the logo, below that is the search box, and below that is another box with nothing in it.

    I am running Windows XP, SP3. I have tried to run Firefox 4 several times but it doesn't work properly. The main page comes up showing the logo, below that is the search box, and below that is another box with nothing in it.

    The external DVD/CD Writer will Not appear on your desktop when you attach it to your iMac.  It will appear in "Finder", which is in your Dock.
    Hope this helps

  • Trying to install CS3 on my Mac from DVD and I get Required Resources are missing. I have run this program for years but this occurred after I rebuilt OSx

    Trying to install CS3 on my Mac from DVD and I get Required Resources are missing. I have run this program for years but this occurred after I rebuilt OSx

    I ran the adobe cleaner and that did not help. I then uninstalled norton antivirus. and that solved the problem and I was able to install photoshop cs3. I than reinstalled norton antivirus. My system seems to be fine,

  • OutOfMemoryError - happens after several days

    I keep getting the OutOfMemoryError after running a rather large java program over and over for several days. The program has sql statements and creates output files. We stop the program every night for sure along with stopping it a few times in the day. So why would the pc run out of memory after this has ran several times? I thought if the java program was completely stopped all of the memory would be freed up. What can I do to fix this problem?

    There are actually 5 copies of the script running from
    different copied directories and running
    simultaneously in scheduled tasks to keep them
    re-running after each one finishes. Over time they
    seem to eat up the machines memory and get to a point
    where none of them will run anymore. Then we have to
    reboot the pc. The script outputs to a text file and
    updates the database but does not load in from the
    text file.Again, I feel like I'm missing something...Java is usually not considered a scripting language, unless we're talking JavaScript, but I doubt you are. Assuming you mean that 5 Java programs are running simultaneously, am I correct in saying that the JVM, or JVM's if each has it's own, never exits? That's what it sounds like, at least.
    That said, you either have a memory leak (as everyone has already suggested), or you actually don't have enough memory to sustain all 5 Java programs at full capacity. If each program runs in it's own JVM and has a max heap size of 128MB and you only have 512MB on the box, it may take some time for the JVM's to allocate all 128MB for each process and cause the exceptions. JVM's allocate heap space on-demand, up to a maximum size, so you wouldn't see the problems when the programs first start.
    Either way, you'll need to cut back the amount of heap space the programs take, using the suggestions already posted. Sorry to drag on, but memory leaks aren't always the (only) source of memory problems.
    That's my 4cents. Good luck

  • Remote fails after several days

    I'm running ZFD 3.2, on a Netware 5.1 (sp5) box with eDir 85.27c.
    When I
    import a workstation, it will work perfectly for a few days, but then
    it
    fails to respond to Remote Control. I can still do Chat, and pinging
    the
    agent gives perfect success. When I do attempt to connect it gives
    the
    message:
    The Remote management agent was unable to locate the workstation in
    NDS.
    I can delete the workstation and re-import it, and it will work again,
    but
    fail after a few days time. I applied all the ZenWorks support packs
    to the
    clients and the server, and I am running the latest snap-ins for
    ConsoleOne.
    This server is the master of the replica.
    Any tips would be appreciated. I went through everything on TID
    10013987
    and none of it has fixed the problem. Thanks.

    Running a mixed IP/IPX environment, all on static assigned IPs. We're
    also
    using SLP with a Scoped list.
    "Jared L Jennings" <[email protected]> wrote in
    message
    news:PaY5a.1250$[email protected]..
    > Are you running pure IP?
    > Is your network DHCP?
    >
    > --
    > Jared L Jennings, CNE 5,6
    > Using XanaNews 1.13.2.10

  • WRT350N, Loses Internet Connection after several days of working.

    My WRT350N worked fine for 4 days after instalation then stoped communicating with my Linksys modem.  I returned my first WRT350N to Best Buy after a day of troubleshooting, and several calls to Comcast, my cable  provider.. Assuming I had a bad router I got a replacement, and after 3 days the replacement router did the same thing, losing its internet connection.  I found it pecular that I could connect to the router. it looked like it was connected to the modem, but would not make an internet connection, even after restarting my Linksys BEFCMU10 Cable Modem and router several times.   I could only make a connection if I pluged my computer directly into the modem.  I also check for firmware updates and at the time there were no firmware updates.I returned my second WRT350N to Best Buy requesting a refund and re-installed my original WRT54GS.  Does the latest version of firmware resolve this specific problem?  Judging by the inquires on this forum, it would appear that alot of users are experenceing this same problem.  I really like the Idea of the Storage Link, but I think I will wait till they work out there problems with the WRT350N, before I buy another Linksys product.

    I suffer from the exact same problem you describe ever since I bought my WRT350N 3 weeks ago. I do not have a solution for you unfortunately. Maybe if everyone with a WRT350N with this problem chimes in here, Linksys will take note.

  • I pod touch turns off. sometimes comes back on after several hours but keeps doing it again a day later.

    my sons i pod touch started turning itself off wouldnt come back on took it back to shop were purchased they sent to apple after a month finally got it back wednesday. after 1 day its doing the same thing. sometimes if its left for several hours i can get it back on but it keeps happening after only a few hours of use. its up to date on software. hope someone can help because i think i shop will try and fob me off because typically it worked fine when they pluged it in to their system.  thanks in advance

    Is the battery fully draining and is that why it is turning off?
    Otherwise try the standard fixes:
    - Reset,. Nothing is lost
    Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Restore from backup
    - Restore to factory settings/new iPod
    Then time for an appointment at the Genius Bar of an Apple store.

  • Finder doesn't show some files after several days of uptime

    It is several days my MacBook Pro is turned on:
    $ uptime
    11:08  up 10 days, 12:02, 2 users, load averages: 1.12 0.80 0.60
    and Finder is starting to behave strange...
    the first thing I noticed is that it doesn't show anymore the contents of application packages (ie. right click on a .app and click Show Contents, shows an empty finder window, like there were no files, but from Terminal I'm able to see contents).
    also some other files are not visible. for instance I just downloaded a file in Safari, but I can't see it in its folder with Finder, but I can see it and open it with Terminal.
    before trying a reboot, what could I do to solve this issue?
    perhaps restart Finder? but what is the correct way of restarting it? killall Finder (or some signal other than SIGTERM)?

    To restart Finder, hold the option key whilst "right-clicking" (or two-fingered tap on a trackpad), on the Finder option in the Dock.
    You will see an option to "relaunch".  Select it, and Finder will restart.

  • EMail on my iPad is set to delete after a day but it doesn't.

    I am getting a little tired of having to go through and delete each email and then having to go into my trash and deleting them there as well.
    I have my emails to delete from trash after 24 hours but it they don't. I have to phyically go through each one.
    Does anyone know how to fix this ... please??
    Thanks!!
    ryderdm

    Bwilbraham-
    Is your iPad able to access the internet using Safari?  If not, I suggest you unplug your WiFi router for a few seconds.  Then reset the iPad's network at Settings-General-Reset-Reset Network Settings.  You will need to reconnect the iPad to WiFi.
    If you are able to access the internet, then there may be a glitch in your iPad Mail setup you are overlooking.  It could be something like the letter O where a zero should be, a space where none is allowed or a backward slash (\) where a forward slash (/) is required.
    One other thing you can try, is to reset (reboot) your iPad.  Hold both the Home and Sleep buttons for several seconds until the Apple logo appears.  Ignore the "Slide to power off" arrow.  The iPad will restart after a couple of minutes.  Resetting this way will not hurt anything, and sometimes clears up mysterious problems.
    Fred

  • RDS user CALS expired after 60 days but still active

    Hello Technet,
    I have installed 15 RDS user CALs on my server. 3 of them haven't been used for 60 days and expired yesterday.
    But they are still listed as "active" what mens they are not available for other users.
    What can I do to "free" those expired RDS user CALs?
    Thanks,
    Florian
    PS: I posted the same question on the German Technet forum
    KOPFteam GmbH Support & Administration in Munich/Germany www.kopfteam.de

    OK, the question answered itself:
    Server 2012R2 RDS User CALs expire after 60 days if they are not used. They get "free" and can be reassigned exactly
    24 hours after the expiration time!
    KOPFteam GmbH Support & Administration in Munich/Germany www.kopfteam.de

  • Published website looks wrong...

    ...When I publish my flash website (using Flash 8) it comes out looking like a chunk of the website taken from the middle of the active area and enlarged! The buttons still work, there are no scroll bars to see the rest though.
    I have added a screenshot of the publish priview of the website, as you can see, its just the middle of it with cut off edges.
    If anyone could help me out that would be wonderful!
    Thanks a lot
    -Ivy
    extra info from publish settings:
                                                            FLASH
    Version: Flash Player 8
    Load Order: Bottom up
    Actionsctipt version: ActionScript 2.0
                                                              HTML
    Template: Flash Only
    Dimentions: Pixels (800px/600px)
    Quality: High
    Wondow Mode: Window
    HTML Alignment: Default
    Scale: Default (Show All)
    Flash Alignment: Center verticle, Center Horizontal

    Beat you to it guys! I solved the problem, but thanks for your views

Maybe you are looking for