SharePoint site continues prompting window for Id and Password?

Hi, recently all users facing issue while opening SharePoint 2010 Sites, sites continues prompting window for Id and Password, even after entering information it’s asking.
When I login on server and try to open the site, there was also asking prompt.
And when I added user id’s in Server local administration group then sites are opening and when if I remove user id’s from Server local administration then again starting to ask prompt.
Domain Controller is running fine.
Please tell what is the issue?

Prakash,ensure that the site is added in trusted zone or disable the loop back check.please check the links below that gives you the guidance on how to over come the issue.
http://expertsharepoint.blogspot.de/2013/10/sharepoint-site-is-prompting.html
Anil Avula[Partner,MCP,MCSE,MCSA,MCTS,MCITP,MCSM] See Me At: http://expertsharepoint.blogspot.de/

Similar Messages

  • ITunes keeps on prompting me for username and password

    When on the Podcasts page, I press the Refresh button and although I have checked the "Remember my credentials" box.  It actually prompts me for the username and password TWICE for the same site.  The first time it actually does remember the username and password.  The second time it remembers the username but the password is blank.  If I fill in the password, and check "Remember my credentials" - the same thing happens next time I start up iTunes and refresh the Podcast.
    I tried deleting the Cookies and the prefs file in the \User\...\Roaming folder, and that did not resolve the issue.

    First, sync all your devices.
    Deauthorize your Mac, then authorize it again.
    When you open iTunes and attach a device Apple will consider you a new user. You will be told that your device is synced to another account and be asked if you wish to sync to this account. Say yes and tell iTunes to write from the Mac to the device when the opportunity is presented.
    After the sync select "Info" from the iTunes tabs and set your sync preferences agein. Then resync.
    The message will disappear.

  • Problem with iWeb asking for username and password to access my public site

    Today for some reason anyone trying to access my site is being asked for username and password. I have made no changes that would require a password. My site has always been public.

    I am having the same problems. My site is public, I checked the settings on the public folder on MobileMe to ensure that it was public and did not require password protection either. But for some odd reason, even though I didn't change anything, my site's pages seem to require a user name and password to get into them. If one continues to click cancel, the page continues to load.
    This does not happen every single time, but it happens more often than not. I have tried this with my iMac, Macbook, as well as my iPod Touch, and I get this on all machines. My brother has tried logging in from another location using his Macbook Pro, and he gets the password prompt as well.
    I tried turning on password protection to the site and uploading the changes, then disabling password protection and reupping the changes once again. I've tried uploading entire site, instead of just changes, but the problem continues to persist. I definitely need this issue solved since this site is important to me.
    The site url is: http://www.globalwinetour.com
    Does anyone have any suggestions to rectify this, or does anyone have any idea what is causing it? Am I missing something here? Am I doing something wrong? Please help me out!
    Many thanks in advance!

  • Outlook 2013 on Windows 8.1 keeps prompting for username and password.

    Hi,
    I have a HP Pavillion TouchSmart laptop with MS Windows 8.1 OS. I had installed MS Outlook 2013 Standard. This laptop is joined to the domain like many of my users, however, it keeps prompting for username and password. The emails are still able to send
    and receive without any problem.
    I have tried to check the connectivity, both cables and wireless are well connected.
    I have tried to reinstall the Outlook 2013, but it still occurs.
    Attempted to recreate profile but it still occurs.
    For the configuration:
    I have selected negotiate authentication, and have unchecked the box that states
    "Always prompt for login credentials"
    Please advise.
    Thank you.

    Hi,
    We can also follow this forum FAQ to troubleshoot this problem:
    Why does Outlook keep prompting for password
    http://social.technet.microsoft.com/Forums/en-US/bcd2d9c2-1a1b-4446-bf32-69fee8cdf11b/why-does-outlook-keep-prompting-for-password?forum=outlook
    Regards,
    Melon Chen
    TechNet Community Support
    It's recommended to download and install
    Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
    programs.

  • I recently installed Acrobat Pro X on my Mac. I initially accepted the terms of agreement, but then every few seconds the same prompted window for the terms of agreement keeps popping up. Can anyone explain why this is happening, and how to resolve?

    I recently installed Acrobat Pro X on my Mac. I initially accepted the terms of agreement, but then every few seconds the same prompted window for the terms of agreement keeps popping up. Can anyone explain why this is happening, and how to resolve?

    Have you tried reinstalling the original drive? Same symptoms with it?

  • Prompting for username and password for opening

    Hi,
      The domain of my organisation is xyz.com. So when try to access any office doc from the office network it opens the office docs without any prompt in office client. But whenever try to access them using VPN or citrix it asks for the username and password.
    Then if I give credentials or cancel it irrespective of that it opens the doc for me.
    The sites are in trusted zone. It is happening for 2010 and 2013 both. But for pdf it is not prompting.
    Why it is asking for credentials and how to mitigate this so that it opens directly from everywhere.

    You can try to take a fiddler trace in both scenarios and then search for the differences. This issue seems to be related with your network configuration that with the product itself.
    In fiddler you can identify what verb is requesting for credentials and from there you can go further with troubleshooting.
    You can check also this article
    http://blogs.technet.com/b/office_integration__sharepoint/archive/2014/02/24/users-are-prompted-for-username-and-password-when-opening-an-office-file-from-a-web-server.aspx
    MCITP|MCTS SharePoint| SharePoint Performance blog

  • Word 2010 prompts for username and password when opening a document on trusted website

    Hi Guys,
    We have a website (not sure if the site is a sharepoint site) on our trusted domain that asked for username and password when trying to access it. I added the site to our trusted sites zone and this resolved the issue however when I try to open word documents
    I get prompted for usernames and password again if I cancel the credentials box the document opens with no issues. 
    Below is some of the steps i have taken
    - Tried opening other non office documents (e.g. PDF, JPEG) and they open with no issues
    - Tried to opening the word documents with a system that only had word pad install and not Office 2010 and the documents open with no issues so it looks like it's an office 2010 problem 
    Can you please advise how I can resolve this issue and if this is a client issue or an issue on the web server thanks

    Hi,
    This issue is caused by the Office suit itself. When Internet Explorer opens an Office document, the appropriate Office application is started with the path of the document. The Office application then tries to access the document directly from
    the server. This differs from other browsers and other file types. Most browsers download the file and call the application to open the file from the local cache. However, when this occurs, if the opened file is changed and saved,
    the changes are only made to the local copy and not to the server copy.
    To establish the richest experience possible, the first thing that the Office application does is communicate with the server to determine the server type and what web authoring protocol is available. The application does this by making
    an OPTIONS request directly to the server.
    As a new process accessing the server, the Office application is required to renegotiate authentication. This method is more secure than a method in which the new process uses an existing authentication that was established by the browser. 
    Please try the following methods:
    An alternative with full functionality but with a calculated risk
    Client approaches that can reduce the impact
    Alternative configurations when the web server does not support DAV or reduced functionality is acceptable
    For more detail information, please refer to the following link:
    http://support.microsoft.com/kb/2019105/en-us
    Thanks
    George Zhao
    Forum Support
    Come back and mark the replies as answers if they help and unmark them if they provide no help.
    If you have any feedback on our support, please click "[email protected]"

  • Users prompted for username and password after sharing removed from servers

    Hello Community
        On Sharepoint 2010 Server using the UI in a 2 server farm with an intranet running on it and everything functions as it should.  However it was noticed that from a users computer when in "Windows Explorer" if "Network"
    is clicked the 2 servers are visible.
        The problem is that when the server are clicked on in Windows Explorer the files and folders on the hard drive of the servers are visible too.
        Subsequently I logged onto the server and when into "Properties' - "Sharing" and
    unchecked the checkbox to "Share this folder".
        That solved the problem of the users being able to see and access the files
    and folders on servers hard drives but now when the users log onto the intranet
    they are prompted for a user name and password and even when they provide the user
    name and password and the page is returned the prompt appears on the screen again(then they cancel out).
        What can be done about the user being prompted for username and password without sharing the drives on the servers ?
        Thank you
        Shabeaut

    What exactly was shared out from the SharePoint server's file system? There are certain things that are shared by default.
    Trevor Seward
    Follow or contact me at...
    &nbsp&nbsp
    This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

  • I wanted to install windows for Mac and I had vista so I put I the disk and installed it then it  loses my  computer wen I turned it on it went straight to windows and it asked me to install it and put in the windows box code I found out I didn't have Ma.

    I wanted to install windows for Mac and I had vista so I put I the disk and installed  followed the steps it then it  closed my  computer wen I turned it on it went straight to windows and it asked me to install it and put in the windows box code I found out I didn't have it so I wanted to go back to Mac I shut it off and it just goes back to windows and asks me to put the box code how do I get rid of it and go back to Mac because no buttons work at the start and i can't take out the disk !! Help

    The two other posts are correct... so I'll just clarify.  What's happening right now is your system is trying to boot into Windows in order to finish the installation.  What you want to do is make it boot into OS X.  As mende1 indicated, with your system off, hold down the Option key and continue to hold it while you turn the system on.  You will eventually be presented with an option to select which partition you would like to boot from.  Choose OS X.  After you get into OS X, again, as mende1 indicated, change the Startup Disk to OS X.  What this will do is cause your system to automatically boot into OS X when you restart it instead of you having to use the Option key when booting each time.
    Relaunching BootCamp Assistant will allow you to remove your Windows installation and partition. 

  • Network printers prompting for username and password

    With the more recent OS upgrades I can now see my printers on my home network. Very cool.  When I select one to print, I am prompted for a username and password. I have tried my network keys with no luck and cannot set a password on my printers. Is this unusual and if not, what should I be using?

    You can try to take a fiddler trace in both scenarios and then search for the differences. This issue seems to be related with your network configuration that with the product itself.
    In fiddler you can identify what verb is requesting for credentials and from there you can go further with troubleshooting.
    You can check also this article
    http://blogs.technet.com/b/office_integration__sharepoint/archive/2014/02/24/users-are-prompted-for-username-and-password-when-opening-an-office-file-from-a-web-server.aspx
    MCITP|MCTS SharePoint| SharePoint Performance blog

  • Mountain Lion - Window for ID and Pw appear without text!

    After install Mountain Lion, (Leopard to Mountain Lion with succes!) the window for ID and Pw (that appear for all permission, to install a new program or other) appear without text! Button to say ok or return are without text so I can't see nothing! And I can't insert my ID or my password!
    What appened?????
    Sorry for my english..
    Thanks, Sara

    Please read this whole message before doing anything. This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it. Step 1 The purpose of this step is to determine whether the problem is localized to your user account. Enable guest logins* and log in as Guest. For instructions, launch the System Preferences application, select Help from the menu bar, and enter “Set up guest users” (without the quotes) in the search box. Don't use the Safari-only “Guest User” login created by “Find My Mac.” While logged in as Guest, you won’t have access to any of your personal files or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin. Test while logged in as Guest. Same problem(s)? After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it. *Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing. Step 2 The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login. Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode* and log in to the account with the problem. The instructions provided by Apple are as follows: 
    Shut down your computer, wait 30 seconds, and then hold down the shift key while pressing the power button.
    When you see the gray Apple logo, release the shift key.
    If you are prompted to log in, type your password, and then hold down the shift key again as you click Log in.
     Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs. The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. *Note: If FileVault is enabled, or if a firmware password is set, you can’t boot in safe mode. Test while in safe mode. Same problem(s)? After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of steps 1 and 2.

  • Connect To Server Hangs Before Prompting For Name And Password

    Hi Everyone.
    Connect to Server hangs for 25 seconds before prompting for name and password.
    I am trying to access a share on a Windows 2008 R2 domain controller via a Mac running 10.6.8 (Snow Leopard) using SMB.
    Example: smb://192.168.101.11/sharename
    Once connected, browsing is fine - it's just the connecting that takes a long time.
    I have specified port 139 and login name, I have disabled IP6 on the Mac, the Mac and Windows 2008 server are on the same LAN and are wired.
    Again, once connected, browsing is fine - it's just the connecting that takes a long time.
    Any help would be appreciated.
    Damian

    Something to add ...
    Connecting to a Windows 2008 stand-alone server outside of the domain (e.g., workgroup) does not have the same problem - the name and password prompt shows immediately.

  • Micrsoft Outlook somtimes prompting for username and password

    hello All ,
     I Have Exchange 2010 sp3 installed two mailbox servers & two HUB & CAS Servers  and Outlook sometimes  prompting for username and password .
    how can fix it .
    Thank you

    Hi,
    Please check the following points:
    1. Does the issue happen to your external users or internal users?
    2. For all users or some specific users?
    If the issue happens to internal users, please configure the authentication in Outlook Security tab with Negotiate Authentication to have a try.
    Thanks,
    Winnie Liang
    TechNet Community Support

  • Lync keeps prompting for username and password.

    Hi All,
    Lync 2013 prompt for username and password.  The request for username and password happens intermittently.
    Appreciate any help.
    Thanks
    denciod

    This kb is helpful to troubleshoot this issue:
    https://support.microsoft.com/en-us/kb/2298541
    There are solutions for Lync users and Lync administrators, choose the method depending on your role.
    -Jeff

  • Prompt for username and password when executing servlet

    In Weblogic 5.1 when I set the username and password in weblogic.properties file, it prompts for the usertname and password when I execute the gatewayServlet
    weblogic.allow.execute.weblogic.servlet.servlets/gateway.administration=vijay
    weblogic.password.vijay=password
    But I guess this is not the way it can be implemented in 8.1. Please let me know how I can prompt for username and password when executing the servlet. I dont want it to be done programatically. Please let me know whether I can set anything on the properties file.
    Thanks
    Vijay Subramanian

    You can use Apache ACLs, http://httpd.apache.org/docs/1.3/howto/auth.html
    GoodEvening!
    I'm developing a web application using jsp
    technology.
    When the user digit:
    http://<machine address>:<port>/<applicationName>
    I would that a browser prompt login is diplayed to
    the user for enter him username and password,
    before loading the index.jsp page. Is possible
    without using awt or swing components?! using only
    the browser's prompt dialog?!
    p.s.
    sorry 4 my bad english! ;-)

Maybe you are looking for