Sharing complex substitution variable values between ASO and BSO databases

We have ASO and BSO Essbase database member names with spaces in, and need to store some of these member names in substitution variables. However, this has to be done differently for ASO and BSO, due to calc script syntax requiring double quotes and MDX requiring square brackets. For example:
ASO:
&CurWeek value = Week 1
MDX: [&CurWeek]
BSO:
&CurWeek value = "Week 1"
Calc Script: &CurWeek
As a result, the substitution variables cannot be shared between the ASO and BSO cubes, since the BSO variable value requires double quotes due to the space in the member name.
Is there a way to get the above to work with both ASO and BSO? Can the double quotes be escaped in calc script syntax? Or can the double quotes be removed in the MDX formula?

Hi TimG,
Apologies for such a late reponse to this, genuinely haven't had a spare second to reply until now!
Yes, I suspect a complex alias name may be the best solution here, and to remove the spaces from the actual member names.
I was not aware of the latter part at all. My colleague has confirmed as much on this too - DBAG 11.1.2.1 pp117 & 118:
"Note: If a substitution variable value is numeric or a member name starting with a
numeral or containing the special characters referred to above is to be used both
in MDX and non-MDX situations, create two substitution variables, one without
the value enclosed in quotation marks and one with the value in quotation marks."
"To ensure that a new substitution variable value is available in formulas, partition definitions,
and security filters, stop and restart the application. All other uses of substitution variables are
dynamically resolved when used."
This last paragraph is the most concerning since we were planning to be able to update substitution variables values and then access the new values from calc scripts and formulae instantaneously. This quirk is unexpected and a little inconvenient. We may have to look at scheduling a change of substitution variable value overnight, followed by a stop/start of the app ready for the next day, and to work around needing to access changed values instantly.

Similar Messages

Synchronize substitution variables values between Essbase and Planning

Hello,
In EPM version 11.1.2.1 (but we noticed the problem also in previous EPM versions) when we set the value of a substitution variable in Essbase, the value is is not immediately updated in Planning: for some time we see the old value. The value in Planning remains unchanged even in we log off or exit Planning and log on again.
Instead if we restart the Planning service, the value is immediately updated
Since we would like to use the Essbase substitution variables to manage some selections in Planning Data Entru Forms, is there any way to force a synchronization, or to increase the frequence of synchronizations between Essbase and Planning?
Regards
Francesco Quaranta

Have a look at setting the planning property SUBST_VAR_CACHE_LIFETIME
http://docs.oracle.com/cd/E17236_01/epm.1112/hp_admin/properts.html
Cheers
John
http://john-goodwin.blogspot.com/

Export - import between ASO and BSO cubes of different structure

Hi everybody!
I have a 'large' ASO cube with information for a period of several years.
I need to be able to load a smaller slice (e.g. one quarter) from the 'large' cube into a BSO cube with a different (simpler) structure , perform calculations and then load the updated data back to the 'large' ASO cube.
What's the best way to approach this (import - export)?
Thanks in advance,
Alex

Hi GlennS,
Hello and thank you again for the help.
I'm running version 9.3.1
The ASO cube has 12 dimensions plus 8 attribute dimensions.
The BSO cube - 8 dimensions plus 2 attribute dimensions.
Data size:
The ASO cube is about 1 GB, about 16 M input level cells. Only about 10 % of it will be extracted and loaded into the BSO cube.
The BSO cube is ~ 300 MB fully calculated. 300,000 existing blocks
I prefer not to load the BSO cube from the same source as because ASO cube contains not only the source data, but also modifications - for example - allocations etc. I would like to keep these modifications and to be able to load (modified) data to BSO, make additional modifications and then 'save' the modified data back to the ASO.
How should I approach loading data back to the ASO? I will need to 'replace' a slice of ASO cube - delete the 'old version' cells and load new version from the BSO cube.
Thanks,
Alex

Changing Substitution Variables - Value takes time to appear in Planning

Hi,
I have an issue with changing substitution variables values. When I do it, Planning takes about 5 minutes to "know" about that change and till then, it continues working with the previous value. Any Idea of how I can solve that?

Hi,
By default, each substitution variable is retrieved and cached from the Essbase server every five minutes or 300 seconds). You can change the retrieval interval by adding the SUBST_VAR_CACHE_LIFETIME property and setting its value in seconds.
To set Planning application or system properties:
1. Select Administration, then Manage Properties.
2. Select:
*Application Properties: set properties for the current application.
* System Properties: set properties for all Planning applications.
3. To:
* Change a property, change its value under Property Value.
*Add a property, click Add. Enter a name (avoid using spaces) and value for the property in the blank row.
If you enter a property already on the tab, its name turns red to indicate it is a duplicate. You can duplicate properties between the application and system tabs.
4. Click Save and confirm your changes.
5. Stop and then restart the application server
Ok?
Cheers
John
http://john-goodwin.blogspot.com/

Use context to pass value between JPF and Java Control

hi,
Can we use context to pass value between JPF and Java Control? It works if i m using InitialContext in the same machine but i dun think it will works if i put Web server and application server in different machine. Anyone have an idea how to do it?
I also want to get the method name in the onAcquire callback method. Anyone knows how to do this?
thks
?:|

Hi.
Yoy can the next options for make this:
1. Pass your values in http request.
example: http://localhost/index.jsp?var1=value1&var2=value2&var3....
2. You can use a no visible frame (of height or width 0) and keep your variables and values there using Javascript, but of this form, single you will be able to check the values in the part client, not in the server. Of this form, the values of vars are not visible from the user in the navigation bar.
Greeting.

Is it possible to increase the substitution variable value length?

Hi,
Is it possible to increase the substitution variable value length to higher value? I checked the SQL User Guide (http://download.oracle.com/docs/cd/B19306_01/server.102/b14357/apa.htm) and it says that the limit is 240 characters.
i just want to know any workaround for this issue?
Thanks.

Hi,
Basically I have a script contains SQL statement (eg: select c,b,a.........from table a.... group by a,b and order by b c) and I have another shell script that will read the whole entire SQL statement
In my shell script, i do it in this way.
sqlplus -S test/test@testdb $SQL statement and i hit the following issue
string beginning ""select c...." is too long. maximum size is 239 characters. {code}

Difference in value Between BW and R/3

Hi,
We are in the process of validating reports .We have observed difference in value for credit and debit amount fields in BW and for the same data is coming from standard data source 0EN_JVA_2 (Joint venture: Actual line item using delta extraction) we have done full data load. In the data source the data coming from a single field and that is spited based on debit/credit indicator in R/3.
I need your valuable input on where the problem is for the difference of value between BW and R/3.
Regards
Deva

Hi,
Is there any filterations in the IP?
Any data packet deletion activity in the start rountine?
Any update rule for the key figure is having routine with modifiying the value?
Kindly check.
In case if you are seeing number of records, always aggregation happens.
If the difference is in terms of quantity of the key figure values, kindly check the above three.
Kindly come to us so that we can suggest
Hope this helps
Janardhan Kumar

Rebate: Differ "Scale Base Value" between "Statistics" and "Billing Doc"

Dear SD Expert,
After I go with Transaction Code :"VOB3" (run report RV15B002), I found that "Scale Base Value" have different value between "Statistics" and "Billing Doc". And the correct value is "Billing Doc". However, the value which shows in my rebate condition now is "Statistic". Thus, my question is
How can I configure my rebate condition based on "Billing Doc" Value instead of "Statistic"? (I don't want to "Correct backlogs" anytime in changing scales based value.) Anyone please feel free in suggestion.
Thanks,
Prach

HI,
This may be useful to you.
http://help.sap.com/saphelp_47x200/helpdata/en/dd/5612d8545a11d1a7020000e829fd11/content.htm
Vrajesh

Activity type is mandatory: enter value between 01 and 07

Hi guys,
I would like to ask you for help..
Recently I updated the App CRM Sales to 2.0.3
Now, when I try to create an activity/task in IPhone(IOs6), it shows me this error "Activity type is mandatory: enter value between 01 and 07".
Do I need to apply any SAP note?
Does anybody have any idea?
Regards,
Eder.

Hi Masayuki,
Thanks again for you help.
So, When I create an Activity/Task in CRM Backend I don´t have problem. I can see in my mobile device (Iphone).
The problem is when I try to create a new activity in App CRM Sales (Iphone).
I think that there is some obligatory field in CRM Backend, but that in App CRM there isn´t to filled in it.
Thanks,

Alter script to keep values between 1 and 99

Hi guys, I currently have a table (for the sake of this lets call it my_table with a column my_column which is integer) I want to restrict the values of this column to values between 1 and 99 and was wondering how I would build this constraint using a script.
Thanks for any help I may recieve on this.

Adding a check constraint should serve the purpose.
create table t_test
col1 integer
alter table t_test add constraint check_col1_val check (col1 between 1 and 99);
insert into t_test values(1);
insert into t_test values(99);
insert into t_test values(81);
insert into t_test values(0);
insert into t_test values(100);Running the last two insert statements will give you a error
insert into t_test values(0)
Error report:
SQL Error: ORA-02290: check constraint (HI_OWNER.CHECK_COL1_VAL) violated
02290. 00000 - "check constraint (%s.%s) violated"
*Cause: The values being inserted do not satisfy the named check
*Action: do not insert values that violate the constraint.

Select just the values between min and max of an accumulated value over day

Hello Forum,
a value is accumulated over a day and over a period of time. Next day the value is reseted and starts again to be accumulated:
with sampledata as (select to_date('09.09.2012 00:04:08', 'dd.mm.yyyy hh24:mi:ss') ts, 120 val from dual union all
                   select to_date('09.09.2012 01:03:08', 'dd.mm.yyyy hh24:mi:ss') ts, 120 val from dual union all
                   select to_date('09.09.2012 02:54:11', 'dd.mm.yyyy hh24:mi:ss') ts, 120 val from dual union all
                   select to_date('09.09.2012 03:04:08', 'dd.mm.yyyy hh24:mi:ss') ts, 120 val from dual union all
                   select to_date('09.09.2012 04:04:19', 'dd.mm.yyyy hh24:mi:ss') ts, 120 val from dual union all
                   select to_date('09.09.2012 05:04:20', 'dd.mm.yyyy hh24:mi:ss') ts, 120 val from dual union all
                   select to_date('09.09.2012 06:12:02', 'dd.mm.yyyy hh24:mi:ss') ts, 23 val from dual union all
                   select to_date('09.09.2012 07:12:03', 'dd.mm.yyyy hh24:mi:ss') ts, 29 val from dual union all
                   select to_date('09.09.2012 08:12:04', 'dd.mm.yyyy hh24:mi:ss') ts, 30 val from dual union all
                   select to_date('09.09.2012 09:12:11', 'dd.mm.yyyy hh24:mi:ss') ts, 45 val from dual union all
                   select to_date('09.09.2012 10:12:12', 'dd.mm.yyyy hh24:mi:ss') ts, 60 val from dual union all
                   select to_date('09.09.2012 11:12:13', 'dd.mm.yyyy hh24:mi:ss') ts, 75 val from dual union all
                   select to_date('09.09.2012 12:21:24', 'dd.mm.yyyy hh24:mi:ss') ts, 95 val from dual union all
                   select to_date('09.09.2012 13:21:26', 'dd.mm.yyyy hh24:mi:ss') ts, 120 val from dual union all
                   select to_date('09.09.2012 14:21:27', 'dd.mm.yyyy hh24:mi:ss') ts, 142 val from dual union all
                   select to_date('09.09.2012 15:21:30', 'dd.mm.yyyy hh24:mi:ss') ts, 142 val from dual union all
                   select to_date('09.09.2012 16:21:32', 'dd.mm.yyyy hh24:mi:ss') ts, 142 val from dual union all
                   select to_date('09.09.2012 17:21:33', 'dd.mm.yyyy hh24:mi:ss') ts, 142 val from dual union all
                   select to_date('09.09.2012 21:21:33', 'dd.mm.yyyy hh24:mi:ss') ts, 142 val from dual union all
                   select to_date('09.09.2012 23:21:33', 'dd.mm.yyyy hh24:mi:ss') ts, 142 val from dual union all
                   select to_date('10.09.2012 00:04:08', 'dd.mm.yyyy hh24:mi:ss') ts, 142 val from dual union all
                   select to_date('10.09.2012 01:03:08', 'dd.mm.yyyy hh24:mi:ss') ts, 142 val from dual union all
                   select to_date('10.09.2012 02:54:11', 'dd.mm.yyyy hh24:mi:ss') ts, 142 val from dual union all
                   select to_date('10.09.2012 03:04:08', 'dd.mm.yyyy hh24:mi:ss') ts, 142 val from dual union all
                   select to_date('10.09.2012 04:04:19', 'dd.mm.yyyy hh24:mi:ss') ts, 142 val from dual union all
                   select to_date('10.09.2012 05:04:20', 'dd.mm.yyyy hh24:mi:ss') ts, 142 val from dual union all
                   select to_date('10.09.2012 06:12:02', 'dd.mm.yyyy hh24:mi:ss') ts, 14 val from dual union all
                   select to_date('10.09.2012 07:12:03', 'dd.mm.yyyy hh24:mi:ss') ts, 34 val from dual union all
                   select to_date('10.09.2012 08:12:04', 'dd.mm.yyyy hh24:mi:ss') ts, 58 val from dual union all
                   select to_date('10.09.2012 09:12:11', 'dd.mm.yyyy hh24:mi:ss') ts, 70 val from dual union all
                   select to_date('10.09.2012 10:12:12', 'dd.mm.yyyy hh24:mi:ss') ts, 120 val from dual union all
                   select to_date('10.09.2012 11:12:13', 'dd.mm.yyyy hh24:mi:ss') ts, 142 val from dual union all
                   select to_date('10.09.2012 12:21:24', 'dd.mm.yyyy hh24:mi:ss') ts, 153 val from dual union all
                   select to_date('10.09.2012 13:21:26', 'dd.mm.yyyy hh24:mi:ss') ts, 153 val from dual union all
                   select to_date('10.09.2012 14:21:27', 'dd.mm.yyyy hh24:mi:ss') ts, 153 val from dual union all
                   select to_date('10.09.2012 15:21:30', 'dd.mm.yyyy hh24:mi:ss') ts, 153 val from dual union all
                   select to_date('10.09.2012 16:21:32', 'dd.mm.yyyy hh24:mi:ss') ts, 153 val from dual union all
                   select to_date('10.09.2012 21:21:33', 'dd.mm.yyyy hh24:mi:ss') ts, 153 val from dual)
select   ts, val
from     sampledata
order by ts asc;How should I change the select statement to skip all data sets before the first minimum and the duplicates after the maximum of a day in order to get such a result:
TS     VAL
09.09.12 06:12     23
09.09.12 07:12     29
09.09.12 08:12     30
09.09.12 09:12     45
09.09.12 10:12     60
09.09.12 11:12     75
09.09.12 12:21     95
09.09.12 13:21     120
09.09.12 14:21     142
10.09.12 06:12     14
10.09.12 07:12     34
10.09.12 08:12     58
10.09.12 09:12     70
10.09.12 10:12     120
10.09.12 11:12     142
10.09.12 12:21     153Thank you

This solution works perfectly when the accumulated value has its low and its high on the same day. But I found out :( , that there is also data, which has its low yesterday and its high today. For a better understandig of the case, there is a machine, wich is working over 3 Shifts with irregular start and end time. For example Shift1 cann start at 5:50 or at 7:15. The accumulated value of the worked time is accumuated for each shift extra. This solution works for the shift 1 (approximate between 06:00-14:00) and for the shift 2(approximate between 14:00-22:00), because there is the low and the high of the accumulated value on the same day. This solution does not work for the shif 3(approximate between 22:00-06:00), because the high of the accumulated value is or can be the next day.
So the thread title should be: "Select just the values between min and max of an accumulated value over the same day(today) or over two successive days (yesterday and today)
Sampledata for shift 1 or shift 2:
{code}
with sampledata as (select to_date('09.09.2012 00:04:08', 'dd.mm.yyyy hh24:mi:ss') ts, 120 val from dual union all
select to_date('09.09.2012 01:03:08', 'dd.mm.yyyy hh24:mi:ss') ts, 120 val from dual union all
select to_date('09.09.2012 02:54:11', 'dd.mm.yyyy hh24:mi:ss') ts, 120 val from dual union all
select to_date('09.09.2012 03:04:08', 'dd.mm.yyyy hh24:mi:ss') ts, 120 val from dual union all
select to_date('09.09.2012 04:04:19', 'dd.mm.yyyy hh24:mi:ss') ts, 120 val from dual union all
select to_date('09.09.2012 05:04:20', 'dd.mm.yyyy hh24:mi:ss') ts, 120 val from dual union all
select to_date('09.09.2012 06:12:02', 'dd.mm.yyyy hh24:mi:ss') ts, 23 val from dual union all
select to_date('09.09.2012 07:12:03', 'dd.mm.yyyy hh24:mi:ss') ts, 29 val from dual union all
select to_date('09.09.2012 08:12:04', 'dd.mm.yyyy hh24:mi:ss') ts, 30 val from dual union all
select to_date('09.09.2012 09:12:11', 'dd.mm.yyyy hh24:mi:ss') ts, 45 val from dual union all
select to_date('09.09.2012 10:12:12', 'dd.mm.yyyy hh24:mi:ss') ts, 60 val from dual union all
select to_date('09.09.2012 11:12:13', 'dd.mm.yyyy hh24:mi:ss') ts, 75 val from dual union all
select to_date('09.09.2012 12:21:24', 'dd.mm.yyyy hh24:mi:ss') ts, 95 val from dual union all
select to_date('09.09.2012 13:21:26', 'dd.mm.yyyy hh24:mi:ss') ts, 120 val from dual union all
select to_date('09.09.2012 14:21:27', 'dd.mm.yyyy hh24:mi:ss') ts, 142 val from dual union all
select to_date('09.09.2012 15:21:30', 'dd.mm.yyyy hh24:mi:ss') ts, 142 val from dual union all
select to_date('09.09.2012 16:21:32', 'dd.mm.yyyy hh24:mi:ss') ts, 142 val from dual union all
select to_date('09.09.2012 17:21:33', 'dd.mm.yyyy hh24:mi:ss') ts, 142 val from dual union all
select to_date('09.09.2012 21:21:33', 'dd.mm.yyyy hh24:mi:ss') ts, 142 val from dual union all
select to_date('09.09.2012 23:21:33', 'dd.mm.yyyy hh24:mi:ss') ts, 142 val from dual union all
select to_date('10.09.2012 00:04:08', 'dd.mm.yyyy hh24:mi:ss') ts, 142 val from dual union all
select to_date('10.09.2012 01:03:08', 'dd.mm.yyyy hh24:mi:ss') ts, 142 val from dual union all
select to_date('10.09.2012 02:54:11', 'dd.mm.yyyy hh24:mi:ss') ts, 142 val from dual union all
select to_date('10.09.2012 03:04:08', 'dd.mm.yyyy hh24:mi:ss') ts, 142 val from dual union all
select to_date('10.09.2012 04:04:19', 'dd.mm.yyyy hh24:mi:ss') ts, 142 val from dual union all
select to_date('10.09.2012 05:04:20', 'dd.mm.yyyy hh24:mi:ss') ts, 142 val from dual union all
select to_date('10.09.2012 06:12:02', 'dd.mm.yyyy hh24:mi:ss') ts, 143 val from dual union all
select to_date('10.09.2012 07:12:03', 'dd.mm.yyyy hh24:mi:ss') ts, 144 val from dual union all
select to_date('10.09.2012 08:12:04', 'dd.mm.yyyy hh24:mi:ss') ts, 145 val from dual union all
select to_date('10.09.2012 09:12:11', 'dd.mm.yyyy hh24:mi:ss') ts, 146 val from dual union all
select to_date('10.09.2012 10:12:12', 'dd.mm.yyyy hh24:mi:ss') ts, 147 val from dual union all
select to_date('10.09.2012 11:12:13', 'dd.mm.yyyy hh24:mi:ss') ts, 148 val from dual union all
select to_date('10.09.2012 12:21:24', 'dd.mm.yyyy hh24:mi:ss') ts, 153 val from dual union all
select to_date('10.09.2012 13:21:26', 'dd.mm.yyyy hh24:mi:ss') ts, 153 val from dual union all
select to_date('10.09.2012 14:21:27', 'dd.mm.yyyy hh24:mi:ss') ts, 153 val from dual union all
select to_date('10.09.2012 15:21:30', 'dd.mm.yyyy hh24:mi:ss') ts, 153 val from dual union all
select to_date('10.09.2012 16:21:32', 'dd.mm.yyyy hh24:mi:ss') ts, 153 val from dual union all
select to_date('10.09.2012 21:21:33', 'dd.mm.yyyy hh24:mi:ss') ts, 153 val from dual)
, got_analytics     AS
     SELECT ts, val
     ,     MIN (val) OVER ( PARTITION BY TRUNC (ts)
                    ORDER BY      ts DESC
                    )      AS min_val_after
     ,     CASE
          WHEN ROW_NUMBER () OVER ( PARTITION BY TRUNC (ts)
                         ORDER BY     val
                         ,      ts
                         ) = 1
          THEN -1 -- Impossibly low val
          ELSE LAG (val) OVER ( PARTITION BY TRUNC (ts)
                         ORDER BY      ts
          END           AS prev_val
     ,     MIN (val) OVER (PARTITION BY     TRUNC (ts))
                    AS low_val_today
     ,     NVL ( LAST_VALUE (val) OVER ( ORDER BY ts
                         RANGE BETWEEN UNBOUNDED PRECEDING
                              AND     ts - TRUNC (ts) PRECEDING
          , -1
          )          AS last_val_yesterday
     FROM sampledata
SELECT     ts
,     val
FROM     got_analytics
WHERE     val          <= min_val_after
AND     val          > prev_val
AND     (      val     > low_val_today
     OR     val     != last_val_yesterday
ORDER BY ts
{code}
with the expected results:
{code}
1     09.09.2012 06:12:02     23
2     09.09.2012 07:12:03     29
3     09.09.2012 08:12:04     30
4     09.09.2012 09:12:11     45
5     09.09.2012 10:12:12     60
6     09.09.2012 11:12:13     75
7     09.09.2012 12:21:24     95
8     09.09.2012 13:21:26     120
9     09.09.2012 14:21:27     142
10     10.09.2012 06:12:02     143
11     10.09.2012 07:12:03     144
12     10.09.2012 08:12:04     145
13     10.09.2012 09:12:11     146
14     10.09.2012 10:12:12     147
15     10.09.2012 11:12:13     148
16     10.09.2012 12:21:24     153
{code}
And the sampledata for shift 3 is:
{code}
with sampledata as (select to_date('08.09.2012 00:04:08', 'dd.mm.yyyy hh24:mi:ss') ts, 23 val from dual union ALL
select to_date('08.09.2012 02:04:08', 'dd.mm.yyyy hh24:mi:ss') ts, 45 val from dual union all
select to_date('08.09.2012 05:03:08', 'dd.mm.yyyy hh24:mi:ss') ts, 78 val from dual union all
select to_date('08.09.2012 06:54:11', 'dd.mm.yyyy hh24:mi:ss') ts, 90 val from dual union all
select to_date('08.09.2012 08:04:08', 'dd.mm.yyyy hh24:mi:ss') ts, 90 val from dual union all
select to_date('08.09.2012 10:04:19', 'dd.mm.yyyy hh24:mi:ss') ts, 90 val from dual union all
select to_date('08.09.2012 12:04:20', 'dd.mm.yyyy hh24:mi:ss') ts, 90 val from dual union all
select to_date('08.09.2012 16:12:02', 'dd.mm.yyyy hh24:mi:ss') ts, 90 val from dual union all
select to_date('08.09.2012 17:12:03', 'dd.mm.yyyy hh24:mi:ss') ts, 90 val from dual union all
select to_date('08.09.2012 19:12:04', 'dd.mm.yyyy hh24:mi:ss') ts, 90 val from dual union all
select to_date('08.09.2012 21:12:11', 'dd.mm.yyyy hh24:mi:ss') ts, 90 val from dual union all
select to_date('08.09.2012 22:00:12', 'dd.mm.yyyy hh24:mi:ss') ts, 24 val from dual union all
select to_date('08.09.2012 22:12:13', 'dd.mm.yyyy hh24:mi:ss') ts, 40 val from dual union all
select to_date('08.09.2012 23:21:24', 'dd.mm.yyyy hh24:mi:ss') ts, 68 val from dual union all
select to_date('09.09.2012 01:03:08', 'dd.mm.yyyy hh24:mi:ss') ts, 79 val from dual union all
select to_date('09.09.2012 02:54:11', 'dd.mm.yyyy hh24:mi:ss') ts, 124 val from dual union all
select to_date('09.09.2012 03:04:08', 'dd.mm.yyyy hh24:mi:ss') ts, 125 val from dual union all
select to_date('09.09.2012 04:04:19', 'dd.mm.yyyy hh24:mi:ss') ts, 126 val from dual union all
select to_date('09.09.2012 05:04:20', 'dd.mm.yyyy hh24:mi:ss') ts, 127 val from dual union all
select to_date('09.09.2012 06:12:02', 'dd.mm.yyyy hh24:mi:ss') ts, 127 val from dual union all
select to_date('09.09.2012 07:12:03', 'dd.mm.yyyy hh24:mi:ss') ts, 127 val from dual union all
select to_date('09.09.2012 08:12:04', 'dd.mm.yyyy hh24:mi:ss') ts, 127 val from dual union all
select to_date('09.09.2012 09:12:11', 'dd.mm.yyyy hh24:mi:ss') ts, 127 val from dual union all
select to_date('09.09.2012 10:12:12', 'dd.mm.yyyy hh24:mi:ss') ts, 127 val from dual union all
select to_date('09.09.2012 11:12:13', 'dd.mm.yyyy hh24:mi:ss') ts, 127 val from dual union all
select to_date('09.09.2012 12:21:24', 'dd.mm.yyyy hh24:mi:ss') ts, 127 val from dual union all
select to_date('09.09.2012 13:21:26', 'dd.mm.yyyy hh24:mi:ss') ts, 127 val from dual union all
select to_date('09.09.2012 14:21:27', 'dd.mm.yyyy hh24:mi:ss') ts, 127 val from dual union all
select to_date('09.09.2012 15:21:30', 'dd.mm.yyyy hh24:mi:ss') ts, 127 val from dual union all
select to_date('09.09.2012 16:21:32', 'dd.mm.yyyy hh24:mi:ss') ts, 127 val from dual union all
select to_date('09.09.2012 17:21:33', 'dd.mm.yyyy hh24:mi:ss') ts, 127 val from dual union all
select to_date('09.09.2012 21:21:33', 'dd.mm.yyyy hh24:mi:ss') ts, 127 val from dual union ALL
select to_date('09.09.2012 22:21:33', 'dd.mm.yyyy hh24:mi:ss') ts, 5 val from dual union ALL
select to_date('09.09.2012 22:51:33', 'dd.mm.yyyy hh24:mi:ss') ts, 23 val from dual union all
select to_date('09.09.2012 23:21:33', 'dd.mm.yyyy hh24:mi:ss') ts, 40 val from dual union all
select to_date('10.09.2012 00:04:08', 'dd.mm.yyyy hh24:mi:ss') ts, 50 val from dual union all
select to_date('10.09.2012 01:03:08', 'dd.mm.yyyy hh24:mi:ss') ts, 60 val from dual union all
select to_date('10.09.2012 02:54:11', 'dd.mm.yyyy hh24:mi:ss') ts, 78 val from dual union all
select to_date('10.09.2012 03:04:08', 'dd.mm.yyyy hh24:mi:ss') ts, 142 val from dual union all
select to_date('10.09.2012 04:04:19', 'dd.mm.yyyy hh24:mi:ss') ts, 145 val from dual union all
select to_date('10.09.2012 05:04:20', 'dd.mm.yyyy hh24:mi:ss') ts, 146 val from dual union all
select to_date('10.09.2012 06:12:02', 'dd.mm.yyyy hh24:mi:ss') ts, 146 val from dual union all
select to_date('10.09.2012 07:12:03', 'dd.mm.yyyy hh24:mi:ss') ts, 146 val from dual union all
select to_date('10.09.2012 08:12:04', 'dd.mm.yyyy hh24:mi:ss') ts, 146 val from dual union all
select to_date('10.09.2012 09:12:11', 'dd.mm.yyyy hh24:mi:ss') ts, 146 val from dual union all
select to_date('10.09.2012 10:12:12', 'dd.mm.yyyy hh24:mi:ss') ts, 146 val from dual union all
select to_date('10.09.2012 11:12:13', 'dd.mm.yyyy hh24:mi:ss') ts, 146 val from dual union all
select to_date('10.09.2012 12:21:24', 'dd.mm.yyyy hh24:mi:ss') ts, 146 val from dual union all
select to_date('10.09.2012 13:21:26', 'dd.mm.yyyy hh24:mi:ss') ts, 146 val from dual union all
select to_date('10.09.2012 14:21:27', 'dd.mm.yyyy hh24:mi:ss') ts, 146 val from dual union all
select to_date('10.09.2012 15:21:30', 'dd.mm.yyyy hh24:mi:ss') ts, 146 val from dual union all
select to_date('10.09.2012 16:21:32', 'dd.mm.yyyy hh24:mi:ss') ts, 146 val from dual union all
select to_date('10.09.2012 21:21:33', 'dd.mm.yyyy hh24:mi:ss') ts, 146 val from dual)
, got_analytics AS
SELECT ts, val
, MIN (val) OVER ( PARTITION BY TRUNC (ts)
ORDER BY ts DESC
) AS min_val_after
, CASE
WHEN ROW_NUMBER () OVER ( PARTITION BY TRUNC (ts)
ORDER BY val
, ts
) = 1
THEN -1 -- Impossibly low val
ELSE LAG (val) OVER ( PARTITION BY TRUNC (ts)
ORDER BY ts
END AS prev_val
, MIN (val) OVER (PARTITION BY TRUNC (ts))
AS low_val_today
, NVL ( LAST_VALUE (val) OVER ( ORDER BY ts
RANGE BETWEEN UNBOUNDED PRECEDING
AND ts - TRUNC (ts) PRECEDING
, -1
) AS last_val_yesterday
FROM sampledata
SELECT ts
, val
FROM got_analytics
WHERE val <= min_val_after
AND val > prev_val
AND ( val > low_val_today
OR val != last_val_yesterday
ORDER BY ts
{code}
with the unexpected results:
{code}
- ts val
1     08.09.2012 00:04:08     23
2     08.09.2012 22:12:13     40
3     08.09.2012 23:21:24     68
4     09.09.2012 22:21:33     5
5     09.09.2012 22:51:33     23
6     09.09.2012 23:21:33     40
7     10.09.2012 00:04:08     50
8     10.09.2012 01:03:08     60
9     10.09.2012 02:54:11     78
10     10.09.2012 03:04:08     142
11     10.09.2012 04:04:19     145
12     10.09.2012 05:04:20     146
{code}
The result should be:
{code}
- ts val
1     08.09.2012 00:04:08     23
2     08.09.2012 02:04:08     45
3     08.09.2012 05:03:08     78
4     08.09.2012 06:54:11     90
5     08.09.2012 22:00:12     24
6     08.09.2012 22:12:13     40
7     08.09.2012 23:21:24     68
8     09.09.2012 01:03:08     79
9     09.09.2012 02:54:11     124
10     09.09.2012 03:04:08     125
11     09.09.2012 04:04:19     126
12     09.09.2012 05:04:20     127
13     09.09.2012 22:21:33     5
14     09.09.2012 22:51:33     23
15     09.09.2012 23:21:33     40
16     10.09.2012 00:04:08     50
17     10.09.2012 01:03:08     60
18     10.09.2012 02:54:11     78
19     10.09.2012 03:04:08     142
20     10.09.2012 04:04:19     145
21     10.09.2012 05:04:20     146
{code}
Thank you for your help!

GET function fails to get values between 1 and 0

Hi i have the folowing code
GET(CONTAVENDAS="PERCVOLUMECORP",FONTEDADO="INPUT",TEMPO="2011.INP",PRODUTO="%SPECIE%_IN",CANAL="NACANAL",ORGCOMERCIAL="NAORGCOM")
When the value in the PERCVOLUMECORP account, is greater or equal to 1 let's say 80, the get function returns me the correct value, but when i have a value between 0 and one, for instance 0,25, the get function returns 0 (zero)
Any ideas?
Thanks in advance.
Leandro
Brasil

Here is the entire script
**SELECT(%ANO_BD_TRAB%,[YEAR],CATEGORIA,"ID='BDTRABALHO'")
**SELECT(%ANO_BD_TRAB1%,[YEAR]+1,CATEGORIA,"ID='BDTRABALHO'")
**SELECT(%ANO_BD_TRAB2%,[YEAR]+2,CATEGORIA,"ID='BDTRABALHO'")
**SELECT(%MES_INCIO%, STARTMTH, CATEGORIA, "ID='BDTRABALHO'")
**SELECT(%MESES%,[ID],TEMPO,"MONTHNUM>=%MES_INCIO% AND YEAR=%ANO_BD_TRAB% AND LEVEL='MONTH'")
**SELECT(%MESES1%,[ID],TEMPO,"MONTHNUM>=%MES_INCIO% AND YEAR=%ANO_BD_TRAB1% AND LEVEL='MONTH'")
**SELECT(%MESES2%,[ID],TEMPO,"MONTHNUM>=%MES_INCIO% AND YEAR=%ANO_BD_TRAB2% AND LEVEL='MONTH'")
**SELECT(%CONTAS%, [ID], CONTAVENDAS, "TOPDOWNALLOC='Y'")
*SELECT(%TODOSPROD%, [ID],PRODUTO,"GRUPO='PRODUTO'")
**SELECT(%SPECIES%, [ID],PRODUTO,"GRUPO='TIPOESPECIE' AND FLAG_TOPDA='N'")
**SELECT(%SPECIES_IN%, [ID],PRODUTO,"GRUPO='TIPOESPECIE' AND FLAG_TOPDA='Y'")
*XDIM_MEMBERSET TEMPO = %MESES%,%MESES1%,%MESES2%,%ANO_BD_TRAB%.INP,%ANO_BD_TRAB1%.INP,%ANO_BD_TRAB2%.INP
*XDIM_MEMBERSET CONTAVENDAS = %CONTAS%,PERCVOLUMECORP
*XDIM_MEMBERSET PRODUTO = %SPECIES%,%SPECIES_IN%,%TODOSPROD%
*OLAPLOOKUP VENDAS
*DIM FONTEDADO="INPUT"
*DIM TEMPO="2011.INP"
*DIM PRODUTO="C_IN"
*DIM CANAL="NACANAL"
*DIM ORGCOMERCIAL="NAORGCOM"
*DIM PERCVOL:CONTAVENDAS="PERCVOLUMECORP"
*ENDLOOKUP
*FOR %CONTA% = VOLUME
*FOR %MES% = 2011.JAN
    *FOR %SPECIE% = C AND %SPECIENAME% = CERVEJAS
     *WHEN PRODUTO.SPECIETYPE
     *IS "%SPECIENAME%"
       *WHEN CONTAVENDAS
       *IS "%CONTA%"
         *WHEN TEMPO
         *IS "%MES%"
                *REC(CONTAVENDAS="%CONTA%",EXPRESSION=LOOKUP(PERCVOL))
         *ENDWHEN
       *ENDWHEN
     *ENDWHEN
    *NEXT
*NEXT
*NEXT
*COMMIT
Thanks is advance.

Passing values between jsp and php

hi there, is it possible to pass values between jsp and
php? i really need to find out the way if there is
any. thanks in advance
-azali-

Yes, there are a few ways to do this.
1) Think about using Cookies.
2) Maybe use a Redirect passing the values in the Query string.
3) Retain the data in a repository in the back end.
4) Using Hidden fields within your pages.
I am sure you can use these Idea's for a base to develop other methods on how to pass values back and forth from JSP -> PHP and vice versa.
-Richard Burton

Maxl command that differentiates ASO and BSO?

I want to differentiate between the ASO and BSO db in Essbase(9.3.1) using some MAXL command.
Do we have some MAXL command that shows the property of Databases?
I was hoping to use the command
execute aggregate selection on database ASOSamp.Sample
This command gives an error when run on a BSO.
Ex:
*[admin/localhost]execute aggregate selection on database Sample.Basic
Execution Message:
MaxL requires an aggregate storage application for this operation.*
I was wondering if Maxl generates a return code for this. If it does, how can I capture this return code?

To give a vague answer, you could run the command in your maxl script and use an iferror statement. It will not tell to the error number but that the command failed.
Edited by: [email protected] on Oct 13, 2008 1:10 PM
If I could only spell

DbLink between 10g and 8i databases

Hi all
I have a little problem. I have two different databases in two different versions 10.6 and 8.1.7. Some forms (developer 6.i) use the dblink and i get a crash to desktop when i try to compile. Developer exit with abnormal termination.It is due to tables with the dblink aren´t recognized because if i comment the select where these tables are used the programm compiles perfectly.
But when I go to SQL plus,for instance, and use a DESC, the tables are recognize in this case. All the synonym are created correctly.
Any help? Maybe it's due to the different database versions?
Thanks in advance

Hi,
Maybe you should post this problem in a Forms Forum too.
DbLink between 10g and 8i databases
Cheers

Sharing complex substitution variable values between ASO and BSO databases

Similar Messages

Maybe you are looking for