Sharing in GUI Issues

This should be fairly simple I hope.
I use openbox with thunar and thought it might be a nice idea to use the thunar shares plugin.
Installed and followed the instructions on the wiki page to the letter.
For some reason when I try to create a share in the GUI I get the error: "You are not the owner of the folder" and the boxes are greyed out.
If I try the same thing in Nautilus shares it is also unsuccessful and immediately asks for the root password and failure to supply it leads to a greyed out box.
I can put the root password in each time but as it is 53 characters long I'd rather not have to.
Just to clarify, everything works fine if run as root.
Did a forum and google search and just got a German forum post that was not resolved.
Screenshot attached to show issue and permissions:
http://i52.tinypic.com/abtm34.png
As usual all suggestions and any help or pointers are much appreciated.
Last edited by llawwehttam (2011-07-13 15:42:55)

Hi all,
same issue here.
I'm using:
3.0-ARCH x86_64
xfce 4.8.0
Thunar 1.2.2 (Xfce 4.8.0)
Sharing don't work also with kernel 2.6 (if may usefull knowing this)
i think and remember (not sure at all) the same impossibility to share folder when using gnome-shell/gnome-shell-git and nautilus/thunar.
Last edited by Paracarro (2011-08-16 10:58:25)

Similar Messages

Outlook Shared Contacts Sync Issue

**Before i start, i posted this in the Outlook section and was told to post it the Outlook for Exchange section.. So i posted this in the Outlook for Exchange section and the Moderator tells me to post it in the
Outlook section.. So i'm being thrown in a loop back and forth between two forums. Please help me either post it in the correct section or help me with my issue. Links to my posts are at the bottom of this re-post.**
I have a user who adds emails to the "Notes" section of a shared contact. It has worked in the past. She now drags and drops the email into the notes folder, it shows that the email was added, she saves the contact, closes the contact,
then reopens the contact and the information/email that was added is no longer there.
Also, when she opens up the contact, on the top of the window it says "This item was not completely updated during the last server synchronization"
On the bottom of the contact's window it says "Last modified by [email protected] on 11/19/2014" So it doesn't seem to have updated for about 5 months.
The user is on Outlook 2010 - Cached Mode - Windows 7
We use Exchange 2013
We have checked her sync issues folder and see two messages pertaining to this shared contact.
First message:
14:16:33 Message class: {SU:IPM.Contact}
14:16:33 Contact Conflict Resolution
14:16:33 Local subject: {SU:Ingrid CFA}
14:16:33 Remote subject: {SU:Ingrid CFA}
14:16:33 Local Message Entry ID: {CB:70, LPB:0x00000000AFA1EF859AE6504792345849F0F0C4140700E9345E3213702241A10CFA6D622F656C000001FFFB240000DBEC5D21812CC942B34B4111BD5F0D3300017B8B40200000}
14:16:33 Remote Message Entry ID: {CB:70, LPB:0x000000007524BE6B5A3B5E4382F176DC9F66C4DE0700E9345E3213702241A10CFA6D622F656C000001FFFB240000DBEC5D21812CC942B34B4111BD5F0D3300017B8B40200000}
14:16:33 Local Message ChgKey: {CB:20, LPB:0xD7D33145CC21034ABB74B571156377D000174173}
14:16:33 Remote Message ChgKey: {CB:22, LPB:0x8979D80AC4A8874A871E528FE6AC747F00004F6A9170}
14:16:33 Local Message PCL: {CB:268, LPB:0x161E914ECBC493AC4DB8B2AF029E78C12E0000001317841620B5DB08ECAA48428A9EFC2F9C38593200000365FB6B142C5B7C2DE3E3674D8036C55574F581140001991C142D56F92C21695244880EA94B73C5F9F000011F9A1656474D622DDFC640AE23640306698C0D00000675A6931667233CF272684543A43008D46655DACB00000460EDF0167A7D3852E0F5AA41B6E04DEED86D0A090000BA3D086C16A33B60E3AD0C7C45BCD9DCEEA91B3A0200000008526714C35DB6FE77E94949A11DF79D4584CC7D0003C18F14D7D33145CC21034ABB74B571156377D00017417316DBEC5D21812CC942B34B41
14:16:33 Remote Message PCL: {CB:268, LPB:0x161E914ECBC493AC4DB8B2AF029E78C12E0000001317851620B5DB08ECAA48428A9EFC2F9C38593200000365FB6B142C5B7C2DE3E3674D8036C55574F581140001991C142D56F92C21695244880EA94B73C5F9F000011F9A1656474D622DDFC640AE23640306698C0D00000675A6931667233CF272684543A43008D46655DACB00000460EDF0167A7D3852E0F5AA41B6E04DEED86D0A090000BA3D086C16A33B60E3AD0C7C45BCD9DCEEA91B3A0200000008526714C35DB6FE77E94949A11DF79D4584CC7D0003C18F14D7D33145CC21034ABB74B571156377D00015153716DBEC5D21812CC942B34B4
14:16:33 Checking local modifications
14:16:33 Compare property: 0x0037001F
14:16:33 Table critical stop property: 0x0E13000D
14:16:33 Local modification: {18:16:16.0620 21/04/2015
[DD/MM/YYYY]}
14:16:33 Remote modification: {14:51:54.0059 19/11/2014
[DD/MM/YYYY]}
14:16:43 HRESULT: 0x8004010F
14:16:43 HrCreateConflictItem failure
14:16:43 HRESULT: 0x8004010F
14:16:43 HrConfMsgKeepWinner failure
Second message:
14:16:33 Synchronizer Version 14.0.7147
14:16:33 Synchronizing Mailbox 'Lisa Love'
14:16:33 Synchronizing local changes in folder 'Brent Brader
- Hedge Fund Investors'
14:16:33 Uploading to server '[email protected]'
14:16:43 Error synchronizing message 'Ingrid CFA'
14:16:43
[0-0]
14:16:43 Moved a message that failed synchronization to 'Local
Failures'. Message subject -> 'Ingrid CFA'. You can view this message in your offline folder only.
14:16:46 Done
I've checked other posts online and couldn't quite figure out a solution to this issue. Any help or direction would be appreciated.
Thanks in advance,
John
My first post:
http://answers.microsoft.com/en-us/office/forum/office_2010-outlook/outlook-shared-contacts-sync-issue/d10b10f3-b4f2-4e31-bb2d-b24fdc0920a9?rtAction=1430142184379
My second post:
https://social.technet.microsoft.com/Forums/office/en-US/b4ca088a-c820-4912-a25f-661aac56443f/outlook-shared-contacts-sync-issue?forum=exchangesvrclients

Hi Allen,
Neither are correct. They open a contact in their address book and drag the email into the "Notes" section of the contact. So they do not drag the email into the Notes section of Outlook nor the Contacts section to create a new contact.
There are no errors. I have a screenshot with an example contact card but i can't add it because it says i need to verify my account.. I'm not sure how to do that. I already clicked on the verification email. For example. An email
to me from Bill titled "company announcement" is dragged into the notes section of in Bill's contact card. This is so that i can go to my contacts, click on bill's card, and see emails from him that are important saved inside his contact card.
After dragging the email into this location, I hit save and close the contact card. Usually the email stays there in the notes section but lately when I reopen the contact card, the email that I dropped into the Notes section has disappeared. Other
emails are still in the Notes section but new ones just don't stay.
Just tried doing a Send/Receive All and same issue. User is in cached mode because they have a large mailbox. Can try online mode. Do you know if the Notes section in the contact list has
a size limit?

SAP GUI issues - VA41 - additonal data B screen is not visible completly

Hello everyone,
Tthere was a problem reported by one of our sales users that in VA41/VA42 screen, there are different tables available, there is a tab "Additional data B" for one user only half of the tab is visible in the presentation server. The user is not able to scroll right/left and couldn't do any data entry on that screen.
Any one has any clue why this issue is only for this user.
The GUI version and patch : 7.10 with Patch level 3 ( File version : 7100.1.3.1029)
When we ask the user to try logging with his id in another PC, the table is visible completely. Both the desktop' GUI version is all the same. No other user is having this issue except one user. Hence I think it is related to GUI issue.
If anyone faced this issue before, please suggest a resolution/workaround
Please don't suggest for higher level patch, other PC's with the same level patch is working fine.
Rajan

We had a similar issue with a different t-code. The user also had a problem with Outlook and the CRM system we use. We eventually decided thet athe user's profile information was corrupted.
We deleted the user's windows profile on the particular PC and then created it again. This fixed the problem - probably not the best answer, but it worked.

GUI issues in MARS

Dear Friends,
I have a MARS 100 appliance running ver 6.0.6 and some gui issues.
I have to click on GO button the browser twice or thrice and only then it opens the page. This behaviour happens randomly with clicking different pages like Query page, Incident page and so on. So what i do is click on the Incidents page, if the progress bar below on the browser window freezes and never moves saying "Waiting", i then click on the Go button and then the page opens!! Sometimes i have to clock on go button multiple times.
Has anyone else faced this issue?
thanks a lot
Gautam

THe following
is the sysstatus information
sysstatus - 21:32:44 up 18 min, 1 user, load average: 4.00, 4.20, 3.20
Tasks: 175 total,   3 running, 172 sleeping,   0 stopped,   0 zombie
Cpu(s): 37.7% us, 11.7% sy, 0.0% ni, 35.4% id, 15.0% wa, 0.2% hi, 0.0% si
Mem:   4154060k total, 4137392k used,    16668k free,     2504k buffers
Swap: 4200988k total,    31968k used, 4169020k free, 2866712k cached
PID USER      PR NI VIRT RES SHR S %CPU %MEM    TIME+ COMMAND
3305 pnadmin   18   0 239m 108m 7476 S 74.7 2.7   4:32.00 pnesloader
3508 oracle    16   0 1329m 645m 642m R 44.1 15.9   2:00.48 oracle
3335 pnadmin   16   0 560m 143m 15m S 21.1 3.5   5:55.85 pnparser
3037 oracle    18   0 1358m 731m 700m D 9.6 18.0   3:41.65 oracle
2805 pnadmin   18   0 1063m 333m 14m S 1.9 8.2   4:36.50 java
2886 oracle    15   0 1343m 75m 73m S 1.9 1.9   0:10.28 oracle
3320 pnadmin   18   0 98.7m 37m 8984 S 1.9 0.9   0:38.36 process_postfir
    1 root      15   0 3324 568 480 S 0.0 0.0   0:01.02 init
    2 root      RT   0     0    0    0 S 0.0 0.0   0:00.03 migration/0
    3 root      34 19     0    0    0 S 0.0 0.0   0:00.00 ksoftirqd/0
    4 root      RT   0     0    0    0 S 0.0 0.0   0:00.04 migration/1
    5 root      34 19     0    0    0 S 0.0 0.0   0:00.00 ksoftirqd/1
    6 root      RT   0     0    0    0 S 0.0 0.0   0:00.01 migration/2
    7 root      34 19     0    0    0 S 0.0 0.0   0:00.00 ksoftirqd/2
    8 root      RT   0     0    0    0 S 0.0 0.0   0:00.03 migration/3
    9 root      34 19     0    0    0 S 0.0 0.0   0:00.00 ksoftirqd/3
   10 root       5 -10     0    0    0 S 0.0 0.0   0:00.00 events/0

SAP GUI issue with Portal on Windows Vista

Hello. I am using Windows Vista on my laptop. We use the portal to access our SAP systems. I have SAP GUI 7.1 installed on my machine. When I click my WIN GUI link from inside the portal I get a download file request. I download the file, however I have to click on the WIN GUI link a second time for the GUI to actually open I am using IE 7.0 as well.
Please advise if you know how to resolve this issue.
Thanks,
Stuart

try installing patch 5 for SAPGUI from ftp://ftp.sap.com/pub/sapgui/win/710/patches/

Onedrive for business: Shared with everyone issues

I
We've SharePoint 2013 and OneDrive for Business (on-premises..)
When user put a file on "shared with everyone" OneDrive folder, other users can't view it... Any idea ?

Hi ,
According to your description, my understanding is that “Shared with everyone” OneDrive folder does not work in your SharePoint 2013.
For your issue, please check whether everyone has the permission of accessing “Shared with everyone” OneDrive folder.
You can go to your OneDrive -> My Documents. Click Sharing column of “Shared with everyone” folder, make sure it is shared with everyone:
Thanks,
Eric
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Eric Tao
TechNet Community Support

Shared Review: Synchronization issues... Help!

Hi!
Context:
We make extensive use of Adobe Acrobat for shared reviews using email attachments and links.
A couple of writers in the team have upgraded to use Adobe Acrobat XI Pro with others using Pro 9.
Our shared email reviews make use of an internal web server folder
Problems:
During a recent trial using PDFs sent as links, we have encountered a significant number of cases where comments were:
a) Not visible to all reviewers/initiator.
b) Visible to the reviewer adding the comment, but not visible to others.
c) Lost to all users.
Note, that we experienced the same issues when using PDF sent as email attachments.
In most instances, we have been able to access the internal web server folder and see the review PDF with associated XML review files, using Windows Explorer or a Web browser. However at times we have also lost review comments, where the XML files were not created.
We have a number of reviewers that work from various locations and connect using VPN and the local network. In all situations, the Web server folder can be accessed and updated by the user.
Whilst different connections may cause problems for Adobe Acrobat, we have experienced situations where:
The Publish button was clicked
The PDF was closed and no warning was given that review feedback was not saved in the Web server folder.
Related Issue from 2010:
In my search for answers, I came across the following entry from 2010, that refers to Adobe Acrobat Pro 9:
http://forums.adobe.com/message/3325019#3325019
Today, I opened a review file with review XML files visible in the Web server folder, however Adobe Acrobat XI PRO did not display any comments.
However, after removing the contents of the \AppData\LocalLow\Adobe\Acrobat\11.0\Synchronizer\resources folder, Adobe Acrobat displayed all comments as expected.
Solution ?
I cannot expect all initiators and reviewers to clear down the \synchronizer\resources folder on a regular basis to clear out issues with the files created by Adobe Acrobat.
Similarly, I cannot expect reviewers to restrict working on shared reviews to when they are directly connected to the office network rather than via VPN.
The "solution" presented in the above entry suggests a temporary workaround, however, given that the entry was reported 3 years ago with Adobe Acrobat Pro 9, I am concerned that this issue continues to persist through to Adobe Acrobat XI Pro!
Can anyone suggest a more permenant solution to the problems above?
Just a thought...
Is it possible and straightforward to switch off the Adobe synchronizer?
What would be the impact of switching off the Adobe synchronizer?

Hi there,
I am having a similar problem, wherein I could not reliably retrieve comments on a PDF for which I was the review initiator. It seemed I had fixed the problem by manually deleting all the resource files. I was able to reply to comments and publish new comments. However, now I am not able to retrieve my own comments, nor can anybody else (other non-reviewers) see the comments I published.
I am looking at the XML files on our server that hosts our PDFs and there is one XML file that I believes pertains to the comments I made and published. However, it is empty of comments. I'm pretty desperate to retrieve these comments, as they represent a day or so of work for me and other innocent third parties.
Is there any other way to retrieve these comments? I have a bunch of deleted "resources" files from last week, I'm wondering if there is any way to force-sync to one of these resource files? Might the resource files contain my comments? I can't accept that the comments are just lost in the ether when I was getting "successfully published" messages from Adobe each time I clicked "publish comments."
Another thing to note: Every time I open the "_review.pdf" file, the "Welcome Back to Shared Review" screen shows a different server name in the "Review Server" line. That seems a bit troubling, no? Is it possible that my XML files are stored on a different server than the server that hosts the PDF file? In which case I can troll through all of our servers for the XML files that contain the missing PDF comments?
Help help please help.

Unable to Share a PDF from Adobe Acrobat 8 Pro for Shared Review-Permissions Issue

Hi,
I get the following message while trying to initiate shared review for a document.
Please help.
Regards,
Himani

No updates recently - except possibly whatever Microsoft updates automatically (security, etc.).
What is quite strange is this specific isolated instance:
If I am in a Word document, then highlight and select (Ctrl C) a range of text, then go to Acrobat 9 Pro and try to create a PDF from that clipboard text, I get the above error. However, if I select text from another program, such as a web page, then Acrobat does not complain when I try to create a PDF from the clipboard, and everything proceeds as expected.
So that makes one think that the issue is with Word; however, I sometimes (and "sometimes" is the operative word) get the error when taking text from Excel. But sometimes not.
Is it Microsoft? But that is strange, as all this worked a few days ago - specifically on Friday 9/3. I use this feature daily,
And, as I mentioned before, trying to create a PDF from an entire Word file also does not work (create from File).

Acrobat Pro X Shared Review email issue

One of our agency users is having problems sending shared reviews. When she gets to the final step of sending the shared review the TO: field will not allow her to add e-mail addresses either manually or via the Outlook address book. This happens sporatically for her, but not for other users and is a recent occurance.
The machine is Windows XP, Office 2007, Adobe Pro X. SharePoint 2007 and Outlook is the e-mail client. We create shared reviews by collecting comments on our own internal server > SharePoint Workspace > Send Automatically Using Adobe Acrobat > As a link within Message. The reviews are given a unique server profile for each review and each review is given it's own workspace.

Did she install Outlook after installing Acrobat X? Although this should not create any issue but still running a repair for Acrobat might help.

Mac - Windows Project Sharing: Media Linking issues

I just got a Windows 7 machine to experiment with using both my old Mac Pro and Windows 7 CS 5.5 to work on the same project.
I am using the Mac Pro as a server, a bunch of fast drives are hooked up to it. Right now I'm using Mac 10.7.3 and sharing those drives via the SMB protocol. This has some issues, like sometimes Windows can't connect to the Mac, but if I reset the Mac's SMB sharing and reboot it seems to fix this (fingers crossed.)
The main issue is that Premiere Pro cannot find some files on the Mac Pro's SMB shares. I'm not sure how many it finds or doesn't or why it finds some and not others, but it first asks me to locate a file, which I tediously do, and then PPro churns a bit and then asks me for another one. I'm using a lot of AVCHD material, so in some cases the media files have the same name, such as "00000.MTS". Premiere Pro doesn't seem to be able to provide any information on the original path of the file it wants to find, though I am sure that path info is somewhere in the Project file. It just doesn't present it to me when it asks me to locate it.
This makes finding non-unique files pretty hard.
Have others encountered this issue and what was your solution? Is there a utility I can use on Windows 7 to allow it to see the Mac SMB shares in a way that it can interpret the paths seamlessly?
The good thing is that PPro Windows is finding most of the files after I point it to one or 2 files it can't find, so sometimes this is working, though mysteriously.
Thanks much for any advice!
-Keith

Thanks Jim, however I do believe that the Premiere Pro project contains enough metadata path information to find the files. For example I do similar things with FCP and it will provide the exact path to what it couldn't find, chosing to search within it's interface will eventually find the correct file. PPro (at least 5.5) doesn't present this interface. That is a PPro issue.
I also believe that camcorder manufacturers could help by allowing unique names for the AVCHD MTS files. I don't think there is really any limitation on this, it's just lack of understanding of workflow on the manufacturers' part. I need a solution now, I don't think writing letters to manufacturers is going to get me what I need right now.
As I say, for the most part, with very little work for me Premiere Pro somehow found many of the correct files, even though they had identical names. It somehow made that association. However, in how it interacts with the OS and how rigorously it searches drives is mysterious and possibly buggy. I'm looking either for a solution for Premiere Pro, or some utility or searching workflow that will help PPro find the finds it really does know about. I am sure that my lack of familiarity with how Windows does this on shares is part of my problem, I'm looking for real solutions that people have used, I'm sure many have been in the exact situation, either by taking a drive over to another windows edit machine or whatever, and they hopefully have worked it out.
Anybody been in my situation and what did you wind up doing?
Thanks much!
-Keith

Shared server config issues

Dear experts,
Below is my environment details:
DB: Oracle 10gR1 Base (10.2.0.1)
OS: RHEL 5
I have configured shared servers as shown below:
1) Set the following parameters
dispatchers='(protocol=tcp)(dispatchers=2)'
max_dispatchers=10
shared_servers=4
max_shared_servers=10
circuits (not configured)
2) Changed TNS parameter as below
I modified SERVER=DEDICATED to SERVER=SHARED
3) lsnrctl services
the output of this command shows dispatchers ready
Now coming to the issue, when i connect to the database using new tns alias, i see "NONE" displayed under "SERVER" column of the V$SESSION view. It should have been SHARED.
Appreciate your help in this regard.
Thanks
P

In Shared Server configuration when we see value 'NONE' , it means there is no task being processed by shared server for that session. The server column will infact show status of 'SHARED' if there is some task being processed at that particular time by the shared server process for that session. Hence to check the status, fire some big query and then check the server status .
you can check the shared server as
select server from v$session where machine='XXXX' ;--neeraj

Screen sharing image quality issue

When I share my screen with another participant the picture/image (screen) quality is so poor that the other participant cannot read the text on his/her screen.
Is there any way to configure the Skype to improve the quality?
If not can we get an answer from Microsoft representative on when we can expect an improvement? The picture quality is significantly worse than other services (e.g. join dot me).
Thank you for your responses.

Hi kerojarun,
I am using version 6.11.0.102 (latest) with Windows 8 on a desktop (HP) as the sharing party and Surface RT and Surface Pro on the recepient side. I shared both desktop and window with the same results. Network speed should not be an issue as video and audio quality is normal and these type of communication methods are more sensitive to a network quality (not just speed) than a static content (image of text).
If I have to I will test with multiple computers and networks. I just expect better support from Microsoft as the quality is significantly worse than join.me in the same environment and conditions.
If I may ask can you test in your environment and compare Skype vs join.me? You will see the image (text) quality difference for yourself.
I really want Microsoft to improve this feature in Skype so users do not have to use another product (e.g. join.me) for content/web/application sharing.
Regards,
Zbysek

Solaris 10 x86 shared drive mount issues

I have an XP installation, a recently-installed Solaris 10 x86 partition, and a FAT32 partition shared between them.
The issue is this:
When I have /share mounted (using mount -o rw) and listed in the /etc/vfstab, the super-user owns everything and can write there. No other user can own a file or write anything on that partition. I've been getting a "chown: invalid argument" type message on every attempt.
Any ideas?
Thanks in advance.

Just an update, I just reloaded the server with Solaris 9 x86 and the same problem on it as well. Now I am not 100% that this card/drive configuration did work on solaris 9 before, maybe it was a different SCSI card.
The server has been loaded with Windows Server and it works ok on that, so I know that the card/drive combination works ok, just not with Solaris.
Any ideas anyone ? Do I need a different SCSI adapter ?

Hyperion Shared Services Configuration Issue

Hello,
We are using Hyperion Strategic Finance (Version: 9.3.1.2.0.775) on a server XYZ. The shared services database (Oracle) has moved from an old server to a new server.
When trying to configure the new database for the Shared Services we are not able to edit the Database Details.
Can someone please help us with this issue?
Thanks and Regards,
S

Have you tried editing <HYPERION_HOME>\common\config\product\hub\9.3.1.0\hub_1_config.xml as this contains the configuration info.
You can also take a look at the following Oracle support doc - "How To: Re-Configure Hyperion 9.3.3 Repository Databases (Doc ID 1355556.1)"
Cheers
John
http://john-goodwin.blogspot.com/

GUI Issue

I am trying to work with screen painter (se51) in ECC 6.0, Gui 710.
However when we click on the form layout, getting a error message 'EU_SCRP_WN32 : timeout during allocate / CPIC-CALL : 'ThSAPCMRCV'.
Is there any patch that we need to install or and settings that we need to do to get it working.

Hi,
Can you check and implement sap note "204910" for the mentioned issue, also try reinstall Sapgui and add 'graphical screen painter' option.
Please let me know the result.
Thanks,
George

Sharing in GUI Issues

Similar Messages

Maybe you are looking for