Sheduling Agreement item are not appearing in MIGo
Hi,
Good receipt (MIGO) for Sheduling Agreement some items are not display(not appear in item detail screen in MIGO)
Delivery shedule is maintain and SA is released
where to check to slove this problem.
shakir
Hi,
Very help full tip ,now it is showing item with zero quantity
but not the missing item.
Hope to get some tip ...to slove.
shakir
Similar Messages
-
Line items are not appearing while processing F-44
With transaction F-44, to clear vendor account, the system displays only one open item, whereas there are 2 open items on the line item report (FBL1N). Further there are two line items in BSIK.
Please helpHello,
There are two line items in the Vendor account, the details are as follows:
Date Amount PK DR/Cr
31.03.2008 12,050.00 38 Cr
05.06.2008 12,050.00 28 Dr
of above while processing F-44, we are able to see only debit item dated 05.06.2008.other line item is not appearing. When tried by putting document number, it says "NO OPEN ITEMS FOUND" -
Line items are not appearing in F-32
Dear All,
There is one unique issue that is being arised in our system where in the open line items are appearing at the time of customer line item display, but when we go for clearing these line items only some documents are appearing and some documents are not appearing at all.
Is there any reason that documents does not appear while clearing where in still the same is appearing as a open line item in customer line item display.
Regards,
Rupa.hi,
as seen from above mails,
entries are existing in BSID table
entries are passed as part of period end closing entries
entry passed in month end and reversed in next month
proposed sol
1. check the mode of passing the entry in tcode
if tcode is coming from FBS1 the entries will not appear in F-32
if 1 entry in FBS1 and other entry in F-32 then automatic reversal entries were not passed.
there was manual entry.
that is the reason 1 entry in FBS1 and other in F-32.
Thxs,
GB -
Line items are not appearing for some users
Hi
In one module pool program some line items are not appering for specific users. For Ex: Out of 5 line items user1 is able to see only 3 and user2 able to see all the line items. what might be the reason.
Regards
John.Hi,
What do you mean by line items? Are you talking about screen fields in your module pool program or output of the program?
Please clarify your issue.
Regards,
RS -
All open items are not appearing in f-44 for vendor
Hi friends,
I am unable to find all open items in f-44 to clear vendor open items.
I checked in BSIK, it has 3 line items and in FBL1N also having 3 line items.
2 line items are debit and 1 line item is cr.
Dr line items are appearing in f-44 where are Cr (Vendor cr (31) is not appearing in f-44,
Please help me.
Regards,
sureshHalo,
one of the document might be stuck in APP run.I mean proposal run.
Regards,
Praveen R Marati -
Vendors open items are not appearing in clearing
Hi All,
I am able to see 10 open items in FBL1N (Vendors' open Item), but when try to post the outgoing payment through manual clearing, it displays only 6 open items. This is happening for very few vendors.
Please help me to get rid of this problem.
Thanks
ManishHi Manish,
Please check that the payment is scheduled in the APP. If it is there, then you can not see those line items while trying to do manual clearing/ payment.
You can delete the particular payment from Payment Proposal and only after that you would be able to see those specific line itmes in manual outgoing payment.
Thanks -
When trying to access photo stream on Apple TV, I am getting the error message terms and conditions have changed, but when I go into iCloud on my Mac the new terms and conditions are not appearing - How can I manually agree to them ?
Welcome to the Apple Community.
The following article(s) may help you.
Photo Stream ToU's -
Entourage 2000 - sent emails are not appearing in "sent items" folder
I am using Entourage 200 with POP account. I have the preference for "save copies of sent messages in the Sent Items folder" clicked since I install it a year ago. But a couple of days ago, all my sent emails have vanished. Even new emails I compose and sent out are not appearing in the "sent items" folder. I did hit "option" when openning the program and everything verify ok. Any help would be greatly appreciate.
Since this is the Mail & Address Book - Tiger discussions/forum for Apple's Mail and Address Book applications, you probably won't get much help here with your question.
What is the size of your Entourage database file? Entourage uses a single large database to store all application data and I believe Entourage X has a 4 GB database size limit.
Does hit the option key when launching Entourage perform the database rebuild function? If not, do a search with Entourage help with "rebuild" for instructions.
This link may be more helpful.
http://www.microsoft.com/mac/support.aspx -
FOC items with bill rate as "0" are not appearing in project invoice
Customer has a unique requirement of billing resources working on the project for free due to business reasons.
The issue is that the FOC items with bill rate as "0" are not appearing when the invoice is generated.
Please let me know if any one has come across this kind of a requirement and please share if you have any workaround.Hi
You may try setting the bill rate for those cases as 0.01.
That way the items will be included in the invoice, but not affect dramatically the amount billed to customer.
Dina -
Work items are not dis appearing in my inbox for parked FI invoices.
Hi,
work items are not dis appearing in my inbox for parked FI invoices.
We are using asynchronus method, and terminating event for this method.
Could you please suggest, what will be the reason for this.
Thanks & Regards
MadhuHi Karri,
Thank you for your response.
But the event is triggering, No error message is getting.
Any other idea about the issue.
Thanks & Regards
Madhu -
I am constantly told by Itunes that 107 items are not synching from my Ipod Touch to/from Outlook Contacts. I try to resolve the issue and eventually a message pops up saying it could not be completed because it could not find the sync server. This started after one of the updates a couple of months ago. If anyone has found a similar problem and resolved it I would appreciate any assistance.
ThanksTry here:
Advanced troubleshooting for Sync Services on Windows with Microsoft Outlook 2003, Outlook 2007, or Outlook 2010
Sync Services: Advanced troubleshooting for contact and calendar syncing -
Why PO Item does not appear when return GR?
Dear Gurus,
The scenerio is,
A standard PO with 30 items.
The PO is released and complete received by MB01 103, 105.
When return GR by MIGO GR 122, the PO items do not appear except one item. If use MB01, the same.
Why? Pls advice. Thanks.
Regards,
DavidJust found a good OSS note: Note 886735 - MIGO: Unclear why GR is not possible for the purchase order
It has a report attached, that helps to analyse the reason.
Carry out the following checks using the report:
1. Check the document category
Information: The document category 'F' is possible for purchase orders and the document category 'L' is possible for scheduling agreements.
2. Check that the purchase order/scheduling agreement is not deleted.
3. Check that the purchase order/scheduling agreement is not blocked.
4. Check whether the purchase order/scheduling agreement is released.
5. Check that the purchase order is not held.
6. Check whether the goods receipt is already posted.
7. Is there a purchase order for external service?
8. Is there a blanket purchase order?
9. Is there a text item?
10. Is there a statistical item?
11. Is the goods receipt indicator set in the purchase order/scheduling agreement?
12. Check whether the confirmation control is active and whether a confirmation is still not available.
13. Is there a valid scheduling agreement delivery schedule line? -
2LIS_02_ITM deleted line items are not reflected in BW
Hi,
Our current Data flow 2LIS_02_ITM-->DSO-->CUBE.
I am analyzing a Invoice, When it is created 01.04.2014 it has got 10 Line Items and all the data is load to BW,Invoice with 10 Line items.
In ECC I can now see the same Invoice only got 5 line items and from change log I can see 5 line items are deleted on 15.04.2014.These changes are not reflected in BW.In BW invoice data still shows 10 line items.
If I perform setup table job and ECC RSA3 for that invoice I am getting only 5.
I believe it’s something to do with 0RECORDMODE,Can you please let me know how to fix this in BW.
ThanksYes this is a known behavior in case of deltas.
For Deleted line items Rocancel field will have an entry with R.
To handle this you need to map ROCANCEL field in Technical group of transformation (Between Datasource to DSO) with 0Recordmode.
Once you will do that then after activating the data in DSO it will nullify the records and deleted order or item will not appear.
Regards,
AL -
Tax Code and Tax Amount Fields are not appearing
Hi to all,
While making Downpayment Request (F-47) Tax Code and Tax Amount Fields are not appearing in the screen.
for more clarity...
suppose PO is 1150 include all taxes ( Amount 1000+ Tax Amount 150)
as per agreement with vendor we need to raise DR for 1150 and based on DR we will make downpayment to vendor (F-48)
But in F-47 screen Tax Code and Tax Amount fields are not appearing.
Could any body help me on this??
Thanks in Advance
Regards,
Schilukuriwhy you are looking for tax code field, pay gross amount as per PO, same amount will update in PO history as well as Vendor account.
Even if you find the tax code field and check the tax code check box, system will not calculate tax at the time of down payment or down payment request.
Please remember that by default standard SAP provides the tax code field in f-47 or F-48. -
2LIS_02_ITM - Deleted items are not in the ODS 0PUR_O01
Hello,
We activated 2LIS_02_ITM extractor. We noticed that the deleted order items are not available in the ODS 0PUR_O01. SAP Note 578471 (Deleted positions in BW and statistics) explains that deleted items are not "statistical" relevant. However, this is an issue for us. Does anybody know if it's possible to change the behaviour of the extractor to keep deleted order items in the ODS ?
Many thanks.
François.Yes this is a known behavior in case of deltas.
For Deleted line items Rocancel field will have an entry with R.
To handle this you need to map ROCANCEL field in Technical group of transformation (Between Datasource to DSO) with 0Recordmode.
Once you will do that then after activating the data in DSO it will nullify the records and deleted order or item will not appear.
Regards,
AL
Maybe you are looking for
-
2 ipads and neither will charge after ios 8.02 update
We have an iPad 2 and an iPad 3 and updated them both from whatever version of 7 we were running to 8.02 last night. Now neither will charge. I've done hard restarts on both of them. I've tried both Apple chargers and different outlets. I've tried co
-
How to get another page item value in page process.
Hi all i have an after submit process on page 32 to insert into a table. and a page 34 where there is a region containing from page 32. when page 32 get submitted (process as well as) it contain no value for :P34_USER_ID although i am in page 34 and
-
Burning in Brazil: PAL or NTSC?
I'm making a dvd with iDVD for my girlfriend to play in her dvd-player in Brazil. In the "Projectinfo" window, I see that I can/have to choose between either the PAL or NTSC format. Which one I have to use? I know that in Europe the system is PAL and
-
I have bought the Light room 5 disk last December but I mistakenly misplaced the case that had the serial number on it. I need that number to download it otherwise, the disk is no use. Is there any way I can get someone where else?
-
How to discover text objects with specific point size
Can I somehow narrow down the selection to point size xx and smaller? I'd like to outline those objects later. var alltxtObjsBelow10 = app.activeDocument.stories.everyItem() //...with point size smaller than 10pts alltxtObjsBelow10.createOutlines();