Shell replacement but touch functionality not available after start

Hi all,
i use Windows 7 Pro and I want to replace the Windows shell (eplorer.exe) with my own application.
For testing I changed all neccessary registry entries to notepad.exe (on board) as shell. After starting windows with autologon, notepad appears and no deskop and taskbar. Exactly what I expected. The problem is, the touchfunctionality is not available directly
after starting windows. No keyboard an mouse function. When I wait for 3 - 4 minutes without doing everything, the touch functionality is suddenly present.
When I change back to explorer shell, the touch funktionality is present directly after starting windows.
Does anybody know, how I can force the touch functionality, so that the touch work directly after starting windows with my own shell (Notepad)?
Further Information:
I use no third party driver and the touch display is connected via USB to simulate keyboard and mouse.
Thanks in advance.

Hi,
To check the root cause of this issue, I suggest you follow these steps to create 2 boot trace file for comparison:
1. Start your computer in normal, and install WPT (http://social.technet.microsoft.com/wiki/contents/articles/4847.install-the-windows-performance-toolkit-wpt-en-us.aspx)
and run following command to trace boot sequence, it will let you restart your computer.
xbootmgr –trace boot -traceFlags BASE+LATENCY+DISK_IO_INIT+DISPATCHER+DRIVERS+FILE_IO+FILE_IO_INIT+NETWORKTRACE+PERF_COUNTER+POWER+PRIORITY+REGISTRY -postBootDelay 300 -resultPath C:\Boot_Trace_Normal
2. In normal mode, please do the changes to replace Windows shell, then run following command to capture the boot trace during restarting:
xbootmgr –trace boot -traceFlags BASE+LATENCY+DISK_IO_INIT+DISPATCHER+DRIVERS+FILE_IO+FILE_IO_INIT+NETWORKTRACE+PERF_COUNTER+POWER+PRIORITY+REGISTRY -postBootDelay 300 -resultPath C:\Boot_Trace_Replace
3. Check the difference by using Performance analyzer in WPT and referring following article:
WPA Detailed Walkthrough
http://msdn.microsoft.com/en-us/library/windows/hardware/hh448179.aspx
Also, you can upload the two log files into SkyDrive or similar network drive and share the public link for us to research.
Keep post.
Kate Li
TechNet Community Support

Similar Messages

After upgrading to Yosemite I have lost iPhoto. It has a cross through it in Finder, but I clicked on it and I was directed to download the latest version from the App store, but it is not available in the Australian store. Can anyone help?

After upgrading to Yosemite I have lost iPhoto. It has a cross through it in Finder, but I clicked on it and I was directed to download the latest version from the App store, but it is not available in the Australian store. Can anyone please help? I am not an advanced user and I would like my photos back, having had no idea I would lose iPhoto in the upgrade!

Thanks petermac87...but for some reason, the only purchases showing are OS. So assuming iPhoto is in Mountain Lion, I was hoping to look under Hidden Items there as you suggested, but there is no option for that. Only option is to download Mountain Lion again, not iPhoto specifically. Any ideas welcome!

HT1977 I bought apps. My kid delet that after few weeks. Then I have downloaded to same ipad. But some functions not working.

I purchase some apps, my son deleted some. But I have download again from cloud. But some functions not working ask me to pay again. How can I use functions without paying again. Thank you

Search around on the app settings and see if there's a "Restore purchases" option.

Lenovo A1 - Touch screen not working after digitizer replacement

After dropping my tablet and breaking the digitzer, I ordered a replacement digitzer from a company in China. (It took about a month to get it) After watching this video, I was able to install my new digitizer and it finally looked new again....well at least the screen!
But.....when I powered up my tablet, the touch screen wasn't working..... I emailed back and forth with the company and they told me to install drive program, and send me a link to a site with a video, this site may have contained more than the video, but it was all in Chinese and I couldn't figure it out even with Google Translate. So I started researching. I thought I would try and load ICS on it, I thought, "Whats the worst thing that could happen?" it wasn't much more than a brick at this point anyways.
I found this website that let me through installing ICS on it. I had absolutly no expectations...but IT WORKED!!!! MY TOUCH SCREEN IS NOW WORKING!!!! I COULDN'T BELIEVE IT!!!
When I was researching for this problem, there was absolutly no posts anywhere for "Touch screen not working after new digitizer". So I wanted to share my experience.

Yea you are correct.....it must be a hardware problem. You must contact service centre of Lenovo and get help from there.
You can say thank you by pressing the star left to my post IF I HELPED YOU

I downloaded CS6 and am having issues with my print driver. It is not compatible with the HP 2600n and have tried to download drivers given to me by adobe ( (Jupiter 3) but it is not working. after a few days. Its a temporary fix and is still looking for

I downloaded CS6 and am having issues with my print driver. It is not compatible with the HP 2600n and have tried to download drivers given to me by adobe ( (Jupiter 3) but it is not working. after a few days. Its a temporary fix and is still looking for the HP driver when i boot up. It also will not save in any print or postscript format. Does anyone know how to fix?
Currently use a Mac with the latest Mavericks 10.9.4

Oh boy! Acting kind of weird seems to be an understatement, aquaequus!
What type of troubleshooting were we able to do with you? I want to make sure that we can get some sort of resolution for this problem.
It is quite possible the battery door may get your phone in working order again. I'm not sure if the store has it in stock, but it is available in our warehouse for $14.99 which can be ordered via customer service.
Tamara H.
Follow us on Twitter @VZWSupport

Error while opening the custom forms-''function not available to this respo

Error: Function not available to this responsibility , change responsibility or contact ur system administrator
Hiiiii,
While accessing the custom forms in release 12i we are facing the popup error and the form is not getting opened up: "Function Not available to this responsibility. Change Responsibilities or Contact your System Administrator"...
I check the custom top path in $APPL_TOP/admin/adovars.env... its fine there..
but the $Apache_top is not there...
can u plz tell me the solution....
Thanks
Meenakshi Verma

user609981 ,
If ur referring to forms, u need to search in appropriate forum, as this forum is only for OAF queries, and if its realted to OAF page, check the the function of oa page is attached to the specific responsibilty .
--Mukul

Mac mini bluetooth not available after updrading to OSX 10.8

The bluetooth module is not available after upgrading to OSX 10.8 on a mac mini late 2009, anyone with this issue?
Message was edited by: Magnusum

I have an issue where I get Bluetooth mouse/keyboard at the login screen, but once it goes to the desktop they are both dead. This only happens when I have my Drobos plugged up via FireWire. If I boot without those devices plugged in, it works.
Anything like that for you?

Function not available to this responsibility for a custom new application

Hi,
I have followed all steps (except the one regarding the concurrent manager, on line help) described on Metalink Note: 70276.1, 216589.1 and the document titled as: "How to integrate applications release 11i with custom applications"(provided as another Metalink Note, i do not remember which right now....).
The problem occurs when having connected as a new user created ...lets say XXTEST (with a responsibility XXTESTRESP) calls a function(form). The error message "Function not available to this responsibility" occurs...
Do i have to do something else...(for example run the autoconfig, because i modified the custom env file which was created to define and export the variables of the custom applications created)...????
When i source the APPSORA.env file, i get the contents of the env variable :echo $XXTEST_TOP as required....
/..../...../xxtest/11.5.0
Note: I use EBS 11.5.10
Many thanks,
Sim

Sim,
Did you bounce the application services after setting the CUSTOM_TOP in the env file?

Content Server Explorer is not available after sucessful installation of Plumtree Portal

Content Server Explorer is not available after sucessful installation of Plumtree Portal.
Please reply us.

To clarify, do you have the User Profile Service (including MySite Host) up and running on this environment? That's subtley different to the full MySite experience which is clearly not applicable...
Interesting question - thanks for that. Until now I didn't realise there was a difference.
The User Profile Service is up and running, but no MySite Host is set. (I don't believe MySite will be available anywhere here. I guess that means there's no valid MySite Host for me to use.)
Many thanks,
Geoff

PPTP "MPPE required, but keys are not available"

Dear all
Since last reboot of my server I got following errormessage in VPN Logfile when user tries to connect to the server trough PPTP:
MPPE required, but keys are not available. Possible plugin problem?
Anyone have an idea, what could be wrong ?
May as another information: After restart of the server I had problem, that VPN Server was not started, because the L2TP definitions where not correct... Logfile told me. So I have redefined the PPTP and L2TP setting, but disabled the L2TP login, because I have definied this "only" for test purposes. All definitions where made with Server Administrator.
Before restart of Server Login trough PPTP was working quite well...
I forgott to say, that the Server (Leopard 10.5.1) is an OD Master, which is working quite well (until now). The authentication type for PPTP is set to MS-CHAP (Kerberos is grayed out, I don't know why)
Cheers Daniel
Message was edited by: Daniel Lang

Here I have now some logfiles from vpnd... may this helps to see the problem I have overseen:
Wed Dec 12 02:21:21 2007 : Directory Services Authentication plugin initialized
Wed Dec 12 02:21:21 2007 : Directory Services Authorization plugin initialized
Wed Dec 12 02:21:21 2007 : PPTP incoming call in progress from 'xxx.xxx.xxx.xxx'...
Wed Dec 12 02:21:21 2007 : PPTP connection established.
Wed Dec 12 02:21:21 2007 : using link 0
Wed Dec 12 02:21:21 2007 : Using interface ppp0
Wed Dec 12 02:21:21 2007 : Connect: ppp0 <--> socket[34:17]
Wed Dec 12 02:21:21 2007 : sent [LCP ConfReq id=0x1 <asyncmap 0x0> <auth chap MS-v2> <magic 0x5045e9f1> <pcomp> <accomp>]
Wed Dec 12 02:21:21 2007 : rcvd [LCP ConfReq id=0x0 <mru 1400> <magic 0xfb9005f> <pcomp> <accomp> <callback CBCP>]
Wed Dec 12 02:21:21 2007 : lcp_reqci: rcvd unknown option 13
Wed Dec 12 02:21:21 2007 : lcp_reqci: returning CONFREJ.
Wed Dec 12 02:21:21 2007 : sent [LCP ConfRej id=0x0 <callback CBCP>]
Wed Dec 12 02:21:21 2007 : rcvd [LCP ConfReq id=0x1 <mru 1400> <magic 0xfb9005f> <pcomp> <accomp>]
Wed Dec 12 02:21:21 2007 : lcp_reqci: returning CONFACK.
Wed Dec 12 02:21:21 2007 : sent [LCP ConfAck id=0x1 <mru 1400> <magic 0xfb9005f> <pcomp> <accomp>]
Wed Dec 12 02:21:24 2007 : sent [LCP ConfReq id=0x1 <asyncmap 0x0> <auth chap MS-v2> <magic 0x5045e9f1> <pcomp> <accomp>]
Wed Dec 12 02:21:24 2007 : rcvd [LCP ConfAck id=0x1 <asyncmap 0x0> <auth chap MS-v2> <magic 0x5045e9f1> <pcomp> <accomp>]
Wed Dec 12 02:21:24 2007 : sent [LCP EchoReq id=0x0 magic=0x5045e9f1]
Wed Dec 12 02:21:24 2007 : sent [CHAP Challenge id=0x82 <ea8c6372a227309685ab6c0a36d64aec>, name = "server.anywhere.com"]
Wed Dec 12 02:21:24 2007 : rcvd [LCP code=0xc id=0x2 0f b9 00 5f 4d 53 52 41 53 56 35 2e 31 30]
Wed Dec 12 02:21:24 2007 : sent [LCP CodeRej id=0x2 0c 02 00 12 0f b9 00 5f 4d 53 52 41 53 56 35 2e 31 30]
Wed Dec 12 02:21:24 2007 : rcvd [LCP code=0xc id=0x3 0f b9 00 5f 4d 53 52 41 53 2d 30 2d 50 43 31 36 37]
Wed Dec 12 02:21:24 2007 : sent [LCP CodeRej id=0x3 0c 03 00 15 0f b9 00 5f 4d 53 52 41 53 2d 30 2d 50 43 31 36 37]
Wed Dec 12 02:21:24 2007 : rcvd [LCP EchoRep id=0x0 magic=0xfb9005f]
Wed Dec 12 02:21:24 2007 : rcvd [CHAP Response id=0x82 <41....0>, name = "testuser"]
Wed Dec 12 02:21:24 2007 : DSAuth plugin: Could not retrieve key agent account information.
Wed Dec 12 02:21:24 2007 : sent [CHAP Success id=0x82 "S=4020C83B....A M=Access granted"]
Wed Dec 12 02:21:24 2007 : CHAP peer authentication succeeded for testuser
Wed Dec 12 02:21:24 2007 : DSAccessControl plugin: User 'testuser' authorized for access
Wed Dec 12 02:21:24 2007 : MPPE required, but keys are not available. Possible plugin problem?
Wed Dec 12 02:21:24 2007 : sent [LCP TermReq id=0x4 "MPPE required but not available"]
Wed Dec 12 02:21:24 2007 : rcvd [CCP ConfReq id=0x4 <mppe +H +M +S +L -D +C>]
Wed Dec 12 02:21:24 2007 : rcvd [IPCP ConfReq id=0x5 <addr 0.0.0.0> <ms-dns1 0.0.0.0> <ms-wins1 0.0.0.0> <ms-dns3 0.0.0.0> <ms-wins3 0.0.0.0>]
Wed Dec 12 02:21:24 2007 : rcvd [LCP TermAck id=0x4 "MPPE required but not available"]
Wed Dec 12 02:21:24 2007 : Connection terminated.
Wed Dec 12 02:21:24 2007 : Connect time 0.1 minutes.
Wed Dec 12 02:21:24 2007 : Sent 0 bytes, received 0 bytes.
Wed Dec 12 02:21:25 2007 : PPTP disconnecting...
Wed Dec 12 02:21:25 2007 : PPTP disconnected
2007-12-12 02:21:25 CET --> Client with address = 192.168.yyy.yyy has hungup

Commenting functionality not available when I open a pdf in air application

commenting functionality not available when I open a pdf in
air application. Adobe documentation says that is expected with
adobe air 1.0 but I still have the same problem even if I use the
latest air runtime

Back up all data.
In the Finder, select Go ▹ Go to Folder from the menu bar, or press the key combination shift-command-G. Copy the line of text below into the box that opens, and press return:
/Library/Internet Plug-ins
From the folder that opens, remove any items that have the letters “PDF” in the name. You may be prompted for your login password. Then quit and relaunch Safari, and test.
I've seen an unconfirmed report that the "Silverlight" web plugin distributed by Microsoft can also interfere with PDF display in Safari, so you might need to remove it as well, if applicable.
If you still have the issue, repeat with this line:
~/Library/Internet Plug-ins
If you don’t like the results of this procedure, restore the items from the backup you made before you started. Relaunch Safari again.

I erased my drive on Macbook pro, trying to reinstale os x Maverick but it is not available on App store, what should I do?

I erased my drive on Macbook pro, trying to re-install os x Maverick but it is not available on App store, what should I do?

Install Yosemite instead of Mavericks. Or you can do the following if your computer supports Internet Recovery:
Install Mavericks, Lion/Mountain Lion Using Internet Recovery
Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
Boot to the Internet Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND-OPTION- R keys until a globe appears on the screen. Wait patiently - 15-20 minutes - until the Recovery main menu appears.
Partition and Format the hard drive:
Select Disk Utility from the main menu and click on the Continue button.
After DU loads select your newly installed hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed. Quit DU and return to the main menu.
Reinstall Lion/Mountain Lion. Mavericks: Select Reinstall Lion/Mountain Lion, Mavericks and click on the Install button. Be sure to select the correct drive to use if you have more than one.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
This should restore the version of OS X originally pre-installed on the computer.

Function not available to this responsibiltiy

Hi,
When i am trying open responsibility "Counter template" getting error like "Function not available to this responsibility
Change responsibilities or contract your System Administrator"
Could any one please help me how to debug this error.

Please check below docs
R12 Error 'Function not available to this responsibility' When Trying to Access Custom Form. [ID 553014.1]
Custom Form: Function not Available to this Responsibility [ID 1079951.1]
Function Not Available To This Responsibility Error After Creating and Registering a New Form [ID 305792.1]
"Function Not Available To This Responsibility" After Upgrading To Release 12.1.3 [ID 1200743.1]
Custom Forms Directory In Forms Listener Servlet Configuration With Shared APPL_TOP [ID 421106.1]
Thanks
Shree

DataSource not available after restart

Hi,
I have created a new JDBC driver for MS SQL Server 2005 and a custom data source that is using the JDBC driver and that is connecting to my database. Upon creation of the data source, the data source is shown as available (green) and works fine.
However, when I restart my system, the data source is still there, but is not available (red). When I delete the data source and create it again, it works fine.
Does anybody know why the data source might be not available after the restart of the server? Any help would be highly appreciated.
Best regards
Holger

I don't know what I should change in the MS SQL Server. And as the DataSource works correctly once I have deleted and recreated it, I would have thought that the problem is somewhere with the application server.
A colleague of mine is using the same application and is having the same problem, although he independently created his system.
Best regards
Holger

Hsp Functions Not Available

Goog morning,
I´m working with 4 Planning Apps at the same environment, two of which have all the Hsp functions available for EPMA, and two that only have available the following funcions: @JDebug and @JSendDebug.
I need to use the @HspNumToString but it is not available in the application, and when deploying the msg is "Can not find the @HspNumToString function".
In the apps with all the functions available we have configured nothing to make this work, so I can´t understand what is happening.
I wish somebody could help me soon!
Analía

Did you refresh the custom functions while deploying the cube?
Administration->Application->Refresh Application
There is an option to refresh custom functions.
Regards
Celvin
http://www.orahyplabs.com

Shell replacement but touch functionality not available after start

Similar Messages

Maybe you are looking for