"Ship To Address" details missing in the SC and subsequent documents

Hi All,
We have a strange situation.
There is no "Ship To Address" details in the shopping Cart and its subsequent documents.
This happens only for some shopping carts.
As per my understanding "Ship To Address" is a mandatory partner information without which the Shopping cart should not be created at all.
Can anyone please let me know the possible reasons for "Ship to Address" not being present?
Thanks & Regards,
Mayank

Hi Mayank,
Have a look at the following OSS Note:
Note 738534 - Ship to address disappears when product category is changed
Note 953657 - BBP_POC: Ship to address cleared during change of PO item
Note 1022048 - BBPSC03: Ship-to address gets cleared off
Hope it helps.
Thanks,
Pradeep

Similar Messages

Address details while saving the order

hello experts
i am having the requirement where i wanted to fetch the Ship-to Address details that is changed by the user while saving the order.
I tried using different FMs like BAPI_BUPA_ADDRESS_GETDETAIL but these fetch the address from master data. What i want is the new address entered by the user.
In CRM_ORDER_READ i am getting a new ADRNR for the newly entered address (itab_partner-addr_nr)but not able to find any FM to get the details out of it.
did anyone know how to get the same?
Thanks in advance.
regards
rajeev

Hi,
I tried FM BUA_BUPA_ADRC_GET. This one returns address details from memory but doesn't have partner relation in it.
basically it populates partner's name into NAME1 field of ADRC.
regards
rajeev

HT201210 Itunes will no longer open with the error message MSVCR80.dII is missing from the computer, and I'm advised to reinstall itunes but that hasn't worked. What else can I try?

Itunes will no longer open with the error message MSVCR80.dII is missing from the computer, and I'm advised to reinstall itunes but that hasn't worked. What else can I try?
Thanks for your help
Pippa

Click here and follow the instructions.
(98708)

HT1766 Hello there, started to sinc my iPad 3 to my iPhone 5 with iCloud and a lot off the items did copy over, I was connected to a power supply but for some reason it's still missing half the items and I am struggling to retrieve them can you help pleas

Hello there, started to sinc my iPad 3 to my iPhone 5 with iCloud and a lot off the items did copy over, I was connected to a power supply but for some reason it's still missing half the items and I am struggling to retrieve them can you help please.
Thank you Callum Gordon

Well the term "hotlined" I have never heard before. In any case many states (like NY) just passed regulatory powers to the State Public Service Commission of which it may be called something different in your state. You could file a complaint with them. Or file a complaint with your state attorney generals office, they also take on wireless providers.
The problem here is the staff you speak to are poorly trained, in days gone by it took one call to them and they pulled up your account and see the error and had the authority to remove any errors. They did not remove legitimate account actions, but used their heads instead of putting a customer off or worse lying to the customer.
Its a shame you have to go through what you going through.
Good Luck

After loading the latest Aperture 3 update, aperture will not load and it appears to have corrupted 10.6. 10.6.7 now appears to be missing from the computer and my administrator status has changed to standard.

After loading the latest Aperture 3 update, aperture will not load and it appears to have corrupted 10.6.7. and now appears to be missing from the computer and my administrator status has changed to standard. Update Software says I need to do update to 10.6.7 which I can't do because administrator privileges are gone. I didn't back-up with Time Machine ,BAD, but I have all files backed-up on another hard drive. Should I just reformat and start over? Any ideas or help would be appreciated.

PROBLEM SOLVED! For me at least!
Apple Support gave me the clue - I had run Migration Assistant, and it had obligingly replaced a system file (/Library/Frameworks/PluginManager.framework/Versions/B/PluginManager) with the equivalent from my old system.
I reinstalled 10.6.7 using the DVD supplied and all is well.
The moral is - don't use Migration Assistant.
Along the way Apple Support provided me with a link to download Combo update 10.6.7: this could not be installed on my iMac.
Hope this helps.

From which tables i would find the delivery and billing document field..??

I need to create an ALV report which displays the following details in the output.
Order No Item No     Material     Order Qty     Item Category     Plant     Delivery     Billing Document     Sales Org     Dist Channel     Division     Created By     Created On      Changed On
For(Order No Item No     Material     Order Qty     Item Category     Plant) i took the fields from vbap and
for(Sales Org     Dist Channel     Division     Created By     Created On      Changed On)i took the fields from vbak..
From which tables i would find the delivery and billing document field related to sales document.??
need help...
Moderator message : Requirements dumping not allowed, thread locked.
Edited by: Vinod Kumar on Mar 6, 2012 2:53 PM

i am new to abap...so i dont have idea about sd table relationship.
so please reply how to add delivery and billing doc in my coding below..
*& Report ZINAA_SD
REPORT zinaa_sd.
TABLES: vbap, vbak, vbfa.
TYPE-POOLS: slis.
CONSTANTS: c_x TYPE char1 VALUE 'X'.
TYPES:
        BEGIN OF st_vbap,
         vbeln TYPE vbap-vbeln,
         posnr TYPE vbap-posnr,
         matnr TYPE vbap-matnr,
         pstyv TYPE vbap-pstyv,
         kwmeng TYPE vbap-kwmeng,
         werks TYPE vbap-werks,
        END OF st_vbap,
        BEGIN OF st_vbak,
          vbeln TYPE vbak-vbeln,
          erdat TYPE vbak-erdat,
          ernam TYPE vbak-ernam,
          vkorg TYPE vbak-vkorg,
          vtweg TYPE vbak-vtweg,
          spart TYPE vbak-spart,
          aedat TYPE vbak-aedat,
        END OF st_vbak,
       BEGIN OF st_final,
         vbeln TYPE vbap-vbeln,
         posnr TYPE vbap-posnr,
         matnr TYPE vbap-matnr,
         pstyv TYPE vbap-pstyv,
         kwmeng TYPE vbap-kwmeng,
         werks TYPE vbap-werks,
         erdat TYPE vbak-erdat,
         ernam TYPE vbak-ernam,
         vkorg TYPE vbak-vkorg,
         vtweg TYPE vbak-vtweg,
         spart TYPE vbak-spart,
         aedat TYPE vbak-aedat,
       END OF st_final.
DATA:
      lt_vbap TYPE TABLE OF st_vbap,
      ls_vbap TYPE st_vbap,
      lt_vbak TYPE TABLE OF st_vbak,
      ls_vbak TYPE st_vbak,
      lt_final TYPE TABLE OF st_final,
      ls_final TYPE st_final,
      lt_fieldcat TYPE slis_t_fieldcat_alv,
      ls_fieldcat TYPE slis_fieldcat_alv,
      layout TYPE slis_layout_alv,
      lt_sort TYPE slis_t_sortinfo_alv,
      ls_sort TYPE slis_sortinfo_alv.
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-001.
SELECT-OPTIONS: s_vbeln FOR vbap-vbeln,
                s_erdat FOR vbap-erdat.
SELECTION-SCREEN END OF BLOCK b1.
PERFORM select_data.
PERFORM loop_final.
PERFORM sort.
PERFORM a USING:
      'VBELN' TEXT-002,
      'POSNR' TEXT-003,
      'MATNR' TEXT-004,
      'KWMENG' TEXT-005,
      'PSTYV' TEXT-006,
      'WERKS' TEXT-007,
      'VKORG' TEXT-008,
      'VTWEG' TEXT-009,
      'SPART' TEXT-010,
      'ERNAM' TEXT-011,
      'ERDAT' TEXT-012,
      'AEDAT' TEXT-013.
PERFORM display.
*&      Form SELECT_DATA
      text
FORM select_data.
SELECT
   vbeln
   vkorg
   vtweg
   spart
   ernam
   erdat
   aedat
   INTO CORRESPONDING FIELDS OF TABLE lt_vbak
   FROM vbak
   WHERE vbeln IN s_vbeln AND erdat IN s_erdat.
IF sy-subrc = 0.
    SORT lt_vbak by vbeln.
ENDIF.
SELECT
   vbeln
   posnr
   matnr
   kwmeng
   pstyv
   werks
   INTO CORRESPONDING FIELDS OF TABLE lt_vbap
   FROM vbap
   FOR ALL ENTRIES IN lt_vbak
   WHERE vbeln = lt_vbak-vbeln.
IF sy-subrc = 0.
    SORT lt_vbap by vbeln.
ENDIF.
ENDFORM.                    "SELECT_DATA
*&      Form LOOP_FINAL
      text
FORM loop_final.
LOOP AT lt_vbap INTO ls_vbap.
    ls_final-vbeln = ls_vbap-vbeln.
    ls_final-posnr = ls_vbap-posnr.
    ls_final-matnr = ls_vbap-matnr.
    ls_final-kwmeng = ls_vbap-kwmeng.
    ls_final-pstyv = ls_vbap-pstyv.
    ls_final-werks = ls_vbap-werks.
    READ TABLE lt_vbak INTO ls_vbak WITH KEY vbeln = ls_vbap-vbeln BINARY SEARCH.
    ls_final-vkorg = ls_vbak-vkorg.
    ls_final-vtweg = ls_vbak-vtweg.
    ls_final-spart = ls_vbak-spart.
    ls_final-ernam = ls_vbak-ernam.
    ls_final-erdat = ls_vbak-erdat.
    ls_final-aedat = ls_vbak-aedat.
    APPEND ls_final TO lt_final.
    CLEAR ls_final.
ENDLOOP.
ENDFORM.                    "LOOP_FINAL
*&      Form SORT
      text
FORM sort.
ls_sort-spos = '01' .
ls_sort-fieldname = 'VBELN'.
ls_sort-tabname = 'LT_FINAL'.
ls_sort-up = c_x.
ls_sort-subtot = c_x.
APPEND ls_sort TO lt_sort .
ENDFORM.                    "SORT
*&      Form A
      text
     -->FNAME      text
     -->SELTEXT    text
     -->EMPHA      text
FORM a USING fname TYPE string seltext TYPE string.
IF fname = 'KWMENG'.
    ls_fieldcat-do_sum = c_x.
ENDIF.
ls_fieldcat-fieldname = fname.
ls_fieldcat-seltext_m = seltext.
APPEND ls_fieldcat TO lt_fieldcat.
CLEAR ls_fieldcat.
ENDFORM.                    "A
*&      Form ALV
      text
FORM display.
layout-zebra = c_x.
layout-colwidth_optimize = c_x.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
   EXPORTING
I_INTERFACE_CHECK                 = ' '
I_BYPASSING_BUFFER                = ' '
I_BUFFER_ACTIVE                   = ' '
   i_callback_program                = sy-repid
I_CALLBACK_PF_STATUS_SET          = ' '
I_CALLBACK_USER_COMMAND           = ' '
I_CALLBACK_TOP_OF_PAGE            = ' '
I_CALLBACK_HTML_TOP_OF_PAGE       = ' '
I_CALLBACK_HTML_END_OF_LIST       = ' '
I_STRUCTURE_NAME                  =
I_BACKGROUND_ID                   = ' '
I_GRID_TITLE                      =
I_GRID_SETTINGS                   =
    is_layout                         = layout
    it_fieldcat                       = lt_fieldcat
IT_EXCLUDING                      =
IT_SPECIAL_GROUPS                 =
    it_sort                           = lt_sort
IT_FILTER                         =
IS_SEL_HIDE                       =
I_DEFAULT                         = C_X
I_SAVE                            = ' '
IS_VARIANT                        =
IT_EVENTS                         =
IT_EVENT_EXIT                     =
IS_PRINT                          =
IS_REPREP_ID                      =
I_SCREEN_START_COLUMN             = 0
I_SCREEN_START_LINE               = 0
I_SCREEN_END_COLUMN               = 0
I_SCREEN_END_LINE                 = 0
I_HTML_HEIGHT_TOP                 = 0
I_HTML_HEIGHT_END                 = 0
IT_ALV_GRAPHICS                   =
IT_HYPERLINK                      =
IT_ADD_FIELDCAT                   =
IT_EXCEPT_QINFO                   =
IR_SALV_FULLSCREEN_ADAPTER        =
IMPORTING
E_EXIT_CAUSED_BY_CALLER           =
ES_EXIT_CAUSED_BY_USER            =
    TABLES
    t_outtab                          = lt_final
EXCEPTIONS
PROGRAM_ERROR                     = 1
OTHERS                            = 2
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM.                    "ALV

BOM Details in to a Purchase and Sales Documents

Hi
How to get BOM Details in to a Purchase and Sales Documents (With COmponentItems Details).

Hi Chakrapani Bandaru,
According to our knowledge, only BOM of 'Sales' type can be displayed with its components together in Sales documents. But this kind of BOM can not be selected in Purchase documents since they can not be 'Purchased Item' (Item Master Data).
Additionally, BOM of 'Template' type can also display its components in Sales/Purchase documents, but in a different way. The parent and its children are parallel in the documents.
Regards,
Candice Ren
SAP Business One Forums Team

The Flash Player is not running but it is there and it is enabled and Active X is not checked. The Player version is 16.0.0.305. I have the latest ie11 and the latest W8.1. I have used the Adobe tool to delete the Flash and subsequently I have updated or

The Flash Player is not running but it is there and it is enabled and Active X is not checked. The Player version is 16.0.0.305. I have the latest ie11 and the latest W8.1. I have used the Adobe tool to delete the Flash and subsequently I have updated or reloaded Flash using your updater. I have gone into IE options and insured that the settings are supportive of Flash. The Adobe mini Flash test program on your site says it not enabled or Active X is enabled - not true - all is set as it should be. I have gone through your forums but to no avail. I've looked in MS forums but nothing that made any difference. What's going on and what can I do about it?

Try using Firefox. Flash usually works on Firefox when it won't on Safari. I noticed that the Safari does not show the same version as Firefox does. Iwonder if that could be the problem. Safari on the left shows 10.1, Firefox show 10.3

Want shipping Point address(not Number) in the invoice layout

Dear Experts
Please tell me tables and fields how get the shipping point address in invoice layout, if i give likp-vstel, it picks the shipping point number only,
issue resolution is very urgent
Thanks and regards
Janardhan

Hi janardhan,
i am also working on the same type of requirement. here i am giving the details. i think it will helpful to u..
Sold to: VBRK_KUNAG
Ship To: VBPA-KUNNR where VBPA-PARVW=SH
Invoice No: VBRK-VBELN
Name OF Finished Product
Material Code: VBRP-MATNR
Cases : VBRP-VRKME where MVKE-VRKME=CSE
Pallets : VBRP-VRKME where MVKE-VRKME=PAL
Price per case in Unit of measure: KONV-KBETR
Price in Unit of measure: RV61A-AWEIN
Net weight : VBRP-NTGEW
frieght without VAT: VBRP-NETWR + VBKD-INCO1
Vat 20%: 20% of KONV-KBETR where KONV-KSCHL=ZVAT
total with VAT: VBRP-NETWR (VBRP-NETWR + VBKD-INCO1) + VBRP-MWSBK where KONV-KSCHL=ZVAT
Only VAT : KONV-KBETR where KONV-KSCHL=ZVAT
Ammount in words ( if value is 10rs, that should be come in ten repees only): VBRP-BRTWR
1. My Client requires the company code address ( Name , city, pincode, phone number, etc) and his bank details in the layout
VBRK-BUKRS Com. Code
ADRC-NAME1Name
ADRC-STREETStreet
ADRC-CITY1 --- City
ADRC-COUNTRY Country
ADRC-REGIONRegion
ADRC-POST_CODE1- Postal code
ADRC-TEL_NUMBER Telephone number
2.He requires the customer Address like name , street, house number, pincode, phone number, and fax number)
KNA1-NAME1 -
Name
KNA1-STRAS --- Street and house number
KNA1-ORT01 --- City
KNA1-REGIO --- State
KNA1-PSTLZ -
Pin code
KNA1-LAND1 --- Country Key
KNA1-TELF1 -- Telephone number
KNA1-TELFX --- Fax number
3. Total without VAT: VBRP-NETWR
4. Freight without VAT : VBRP-NETWR + VBKD-INCO1
5. Shipping Point Address has to come to layout
ADDR1_DATA-NAME1 --- Shipping point name
ADDR1_DATA-STREET --- Street
ADDR1_DATAHOUSUE_NUM1house number
ADDR1_DATA-CITY1 --- City
ADDR1_DATA-REGION --- State
ADDR1_DATAPOST_CODE1postal code
ADDR1_DATACOUNTRY-- Country
6. Plant Address address has to come to layout
VBRP-WERKS -- Plant
VBRP-WKREGRegion
VBRP-WKCTY -- City
VBRP-WKCOU -- Country
these r the fields needs to be taken based on the requirement..
Reward if helpfull.
Regards,
Praveen kumar.D

Ship-To Address/Performance Location in the Shopping Card

Dear Experts
How can achieve the following requirement.
In SRM Web Browser there is a section -> Ship-To Address/Performance Location
I wolud like debug in order find out how they are getting populated.
Name,
Other Name,
c/o,
Telephone Number,
Fax,
E-Mail Address ,
E-Mail Address
Do you know which program, function group, function module is responsible for it.
Kind Regards
Marco M

Hi,
You may like to check the class /SAPSRM/CL_PDO_BO_SC method PARTNER_FILL to see how the partner and address are being retrieved.
If you need to know how the address is being pulled, please check the FM BUPA_ADDRESSES_GET since this FM will be called eventually.
Best regards.
YS

Filling up of Ship To Address Details in Shopping Cart.

Hi All.
Please let me know in the Shopping Cart, how the data is filled in Ship To Address when we select a new plant in the Basic Data Tab. Like which program or BAPI is used in this....
Thanks in advance

Hi Ashok,
You can create ship to addresses in Edit internal address tab in the SRM WEB GUI with administrator role
When user create a shopping cart , will get a drop down of all the addresses which were maintained here in
the ship to location tab.
Internal address is related to ship to address in the shopping cart.
Hope this will help you .
Koushik

FIOS Availability - My address is missing from the data base

I am looking to order Verizon Fios Internet and am always told it is not available at my address. I know it is available as my neighbor to my left, and across the street both have it. Also, Verizon dug up my lawn to run the fiber which sort of adds a bit of "insult to the injury". I believe that my address was left off of the database when they updated our neighborhood. Does anyone know who I can contact to see about getting this corrected? Their order entry folks don't seem to know and all they will tell me is "it isn't available at my location".
Thanks!

Hi wanmanhit,
Your issue has been escalated to a Verizon agent. Before the agent can begin assisting you, they will need to collect further information from you. Please go to your profile page for the forum and look at the top of the middle column where you will find an area titled "My Support Cases". You can reach your profile page by clicking on your name beside your post, or at the top left of this page underneath the title of the board.
Under "My Support Cases" you will find a link to the private board where you and the agent may exchange information. This should be checked on a frequent basis, as the agent may be waiting for information from you before they can proceed with any actions. To ensure you know when they have responded to you, at the top of your support case there is a drop down menu for support case options. Open that and choose "subscribe". Please keep all correspondence regarding your issue in the private support portal.

For getting purchase order details what are the inputs and outputs

I need to display purchase order details in EP portal by using integration EP, XI and R/3.
I dont know what are the Inputs and what are the Outputs.
Reward points for helpers.
Cheers,
Preethika

Hi Preethika,
for displaying PO use BAPI : BAPI_PO_GETDETAIL
Its input is PO number
Its output are tables PO_HEADER_TEXTS - for PO header data
PO_ITEMS - for PO line items
Thanks,
Rajeev Gupta

Strange lines and parts of characters missing in the text and freezing iss

Recently our emac has been displaying squiggles or dashes randomly on the pages and sometimes parts of the letters are missing. We have also been recently having issues with the emac freezing while using Safari and itunes. I have checked on the Repair List and our mac has a serial # that falls into the effected models. Could these problems be related to that? I have been having a hard time finding my receipt and warranty info. I know we bought the extended warranty but I can't remember for how long. We purchased it in late 2005, early 2006. I don't really want to haul it into the retailer if these problems are related. Any help would be appreciated....Thanks

Yes, it does sound as though your eMac has been affected by the infamous "bad capacitor" issues. A way to check if it is without going to the Apple Store is to power the eMac off, and open up the RAM access slot. If you see the capacitors bulging, then you can go get your logic board replaced for free, and that will fix the issues.
A picture of a bulging capacitor in my eMac (which has since been fixed):
http://smithdal.home.sprynet.com/eMac/Capacitor.jpg
And here's what that did:
http://smithdal.home.sprynet.com/eMac/Freeze.jpg
There have been some reports of people putting in new capacitors by themselves, but taking it to the Apple Store is probably a better idea. First of all, it doesn't void the warranty. Second of all, it's free. And a lot easier.
eMac Mac OS X (10.4.10) 1GB RAM 80GB HD (multiple other computers)

Files missing in the ear and client jar

Hi,
I'm following the examples to build a web service using ANT servicegen task. My
web service calls a lot of other java classes, and those java classes in turn
call other classes. When I used the following taskes to generate the service and
client code, I found the generated ear, war and client jar files only contain
the compiled classes which are used directly by the web service class. Those classes
called indirectly by web service are missing.
<target name="ear">
<servicegen
destEar="${build}/${ear_file}"
warName="${war_file}">
<service
javaClassComponents="com.iit.integration.txlife.txlife28.txlifeProcessor.TxlifeProcessor"
targetNamespace="${namespace}"
serviceName="TxlifeWebService"
serviceURI="/txlifews"
generateTypes="True"
expandMethods="True">
<client
packageName="com.iit.integration.txlife.txlife28.client"
clientJarName="${client_jar_file}"
/>
</service>
<classpath>
<pathelement path="${build}"/>
<pathelement path="${java.class.path}"/>
</classpath>
</servicegen>
</target>

<target name="client" depends="ear">
<clientgen
ear="${build}/${ear_file}"
warName="${war_file}"
packageName="com.iit.integration.txlife.txlife28.client"
clientJar="${client}/${client_jar_file}">
<classpath>
<pathelement path="${build}"/>
<pathelement path="${java.class.path}"/>
</classpath>
</clientgen>
So when I invoked the client code, I always got the class not found exception.
Not sure if I missed anything here.
Thanks a lot,
Henry
[build.xml]

Any required support classes have to be in the client's/server's classpath. Or
at least that's what I do.
"Henry Niu" <[email protected]> wrote:
>
>
>
Hi,
I'm following the examples to build a web service using ANT servicegen
task. My
web service calls a lot of other java classes, and those java classes
in turn
call other classes. When I used the following taskes to generate the
service and
client code, I found the generated ear, war and client jar files only
contain
the compiled classes which are used directly by the web service class.
Those classes
called indirectly by web service are missing.
<target name="ear">
<servicegen
destEar="${build}/${ear_file}"
warName="${war_file}">
<service
javaClassComponents="com.iit.integration.txlife.txlife28.txlifeProcessor.TxlifeProcessor"
targetNamespace="${namespace}"
serviceName="TxlifeWebService"
serviceURI="/txlifews"
generateTypes="True"
expandMethods="True">
<client
packageName="com.iit.integration.txlife.txlife28.client"
clientJarName="${client_jar_file}"
/>
</service>
<classpath>
<pathelement path="${build}"/>
<pathelement path="${java.class.path}"/>
</classpath>
</servicegen>
</target>

<target name="client" depends="ear">
<clientgen
ear="${build}/${ear_file}"
warName="${war_file}"
packageName="com.iit.integration.txlife.txlife28.client"
clientJar="${client}/${client_jar_file}">
<classpath>
<pathelement path="${build}"/>
<pathelement path="${java.class.path}"/>
</classpath>
</clientgen>
So when I invoked the client code, I always got the class not found exception.
Not sure if I missed anything here.
Thanks a lot,
Henry

"Ship To Address" details missing in the SC and subsequent documents

Similar Messages

Maybe you are looking for