Ship to address required for non-billable items?

Hi
We are using order management but all our items are non-billable items. Orders are for Adverts in Magazines/Newspapers therefore not tangible items.
Is it mandatory to assign Ship-to address to all our customers? We are not doing any shipping. How is it possible to create customers only with Bill to Addresses?
Thanks

Hello,
I think it is no problem, just create customer like you want in test instance and test it or delete Ship-to address on sales order and book.
Remember that you have to add correct workflow to sales order type(without shipping)
Regards,
Luko

Similar Messages

Vendor part number for non catalog item in shopping cart?

I have a requirement to get the vendor part number field in shopping cart basic data for non catalog item. This field is available for catalog items, would it be possible to make the same field available for non catalog items as well?

Hi Gummadi,
You can create custom fields in Shopping cart uisng a BADI and can populate the information.
BBP_CUF_BADI can be used to create customer fields.
Please get discuss with your ABAP fellow for the creation of customer field.
Award points for helpful answers.
Rgds,
Teja

Order Priority not transferred to PR for NON stock items

Dear GUYS
Order priority is not getting transferred to PR for Non sotck item
ideally we should get this in the source of supply in the PR as requirement priority & requirement urgency
Regards
chandrashekhar Ingole

chandrashekhar Ingole,
It may be possible to transfer the PM Priority data to the PR via [user-exit|http://pjatkin.users.btopenworld.com/documents/PMCSUserExits.pdf] :
- COZF0001: Change purchase req. for externally processed operation
- COZF0002: Change purchase req. for externally procured component
PeteA

Formatted Search - Calculate GP Base Price for Non Inventory Items

Hi Experts,
On one of our customer's 8.8 PL 15 installation, requirement was to calculate GP for Non Inventory Items (on SO screen). Since SAP does not automatically calculates it we proposed and implemented following solution.
1. Have all Non Inventory Items to be costed at Standard cost so that you can manually enter the cost in the Item Master.
2. Write following formatted search on GP Base Price field so as to calculate the GP Base Price for the Non Inventory Items only. The formatted search must not make any changes to Inventory Items as we want system to calculate the GP automatically (just in case cost changes from SO to Delivery or Invoice).
DECLARE @II AS nVarchar(1)
DECLARE @COST AS Numeric(19,2)
SET @II = (SELECT OITM.InvntItem FROM OITM WHERE OITM.ItemCode = $[RDR1.ItemCode])
SET @COST = (SELECT (OITW.AVGPrice * $[RDR1.NumPerMsr]) FROM OITW WHERE OITW.ItemCode = $[RDR1.ItemCode] AND
OITW.WhsCode = $[RDR1.WhsCode])
IF (@II = 'N')
BEGIN
SELECT @COST
END
3. Formatted search achieves what was originally required however if a user overwrites the Item Code (Inventory Item) in the SO then above formatted search clears the GP Base Price field and sets the GP basis for the item as "Manual". By obverwrite means user first selected item A0001 on line 1 and then entered A0002 on same line i.e. Line 1.
My question here is what is wrong in the formatted search that is resulting in this behaviour.
Any questions please let me know.
Thanks in advance.
Regards
Devinder

Hi Gordon,
Thanks for taking out time to help me however Key requirement here is
Write formatted search on GP Base Price field so as to calculate the GP Base Price for the Non Inventory Items only.
Your query sets the base price for GP Base Price for Inventory Item to ZERO and Base Price By to Manual.
Note that my Formatted search has a problem only when an Inventory Item line is overwritten. I am not sure if this is a problem with SAP itself rather than my query.
Any other ideas please?
Regards
Devinder

GR/IR Clearing for Non-Inventory Items in PO

Hi all,
Can anybody explain if GR/IR reconciliation can be done for non-inventory items in PO. For example, I've raised a PO for a service and received invoice before the service is delivered (little hypothetical, of course, but incase).
If so, will it show in the same MR11?
Thanks
durga.

Hi,
First of all , in case of Service ,Only SR/IR reconcilation can be done.....second ,if your service is not delivered then you can give advance against service PO.
Regards

Credit memo for non inventory item

Hi MM consulatnats,
My client need to know the best practices to handle teh credit memo for non inventory item ??
We have two options like FB65 in FI part where it wont update in PO history.
In MIRO also we can make credit memo w.r.to PO.
What they want to know is if FB65 is the correct way to do this to fully reverse the effect that the receipt and invoicing of the item had on the financial accounts.
What is the best pracise to adopt ??
Need your views
Thanks
A.Gururajan

Hi,
You can use MIRO for credit Memo with ref to PO.
This will update both PO history as well as your FI accounts/Vendor Balance.
Thanks & Regards,

Cost of goods sold (cogs) for non-shippable items (intangible items)

Hi Experts,
Can anyone please help me on this issue for shippable item we can check in material transactions--distributions for cogs account and cost of an item. But how can we check the cost and account for non-shippable items (intangible items) with out using the items and item cost form.
Thanks in advance,
Christ.

Hi,
You need to replace the join MSI.SALES_ACCOUNT(+) = GCC.CODE_COMBINATION_ID with msi.cost_of_sales_account(+) = GCC.CODE_COMBINATION_ID to get the COGS account. Currently you are getting sales account not COGS.
Thanks
Vishalaksha

MIGO Print label WEE1 for non stock items from GR for PO

Hi,
I added logic to print new label into printing program MZ07DETI which is printing labels for stock items. My label is for non stock items. The problem is that for non stock items printing process is not triggered. I created PO with Account Assign. Category F, P or K no material number and no storage location. For this type of PO no print possible during GR posting. Is any set up available in IMG to make it work. I appreciate any response.

Hi,
Please check up if there is any default value at the plant level;in case of such default,the system will post to the GL Account defaulted,not with standing the "standard item category".Better checkup if any cost center /order has been assigned.
The GL item is defaulted thro'the item category.If both the goods and services have been defaulted to the same GL Account,then not with standing the type [ie] whether goods or services,the system will post tot he same GL Acct.
Hope this helps.
Regards.
Ramesh

PO Partial confirmation Quantity not updated for non-catalog items in SRM

Hi Experts,
Partial Confirmation plus Partial Rejection from Ariba(Suppliers network) could not be processed.
Steps to Reproduce:
1) Create a purchase order.
2) Confirm some part of the quauntity and reject the balance part in Ariba.
3) Open the link in SRM and click Copy push button.
4) Click on Process PO and check PO, the PO is not updated with the changes done in Ariba
Expected Result:
PO should update the changes done in Ariba.
Here when part quantity is confirmed and part is rejected at Ariba, its sending a POR but SRM is not updating anything for non-catalog items when POR is copied onto PO.But where as in the Catalog items partially confirmed POR is copied onto PO.
kindly give your valuable inputs to poceed furthur.
Regards,
Chandu

Hi,
I'm not clear you issue. Is it SC -> PR(backend) -> PO(backend) classic scenario ? or You just created a PO in backend system?
BBP_GET_STATUS_2 will update SC follow-on doc information from backend.
Regards,
Masa

MR11- for non material item

I just try to do for one PO with all non material item and
I can't do MR11 for non material item..
error:      Error while determining the currency types for 6302400500 00010

Hello,
a non material item can be a text item but it can be also a service item.
This depends from your customizing. Which item type is relevant for your non material item.
In the item type you can maintain if an item is relvant for pricing or not.
Please have a look in transaction VOV7. Here you can set the flag 'Pricing'.
This flag can have the following specification:
      Blank No pricing
X     Pricing standard
A     Pricing for empties
B     Pricing for free goods (100% discount)
I hope that the information are helpful.
Best regards
Claudia
Edited by: Claudia Neudeck on Jul 17, 2008 8:17 AM

How can we run MDBT transaction for non-valuated items only

HI,
We want to run the MDBT transaction for non-valuated items only...but through this transaction we can run for all items..
How can we run only for non-valuated items???
Regards,

Dear Anil,
MD02 - Material level planning ( Multilevel )
MD01 - Plant level planning ( Multilevel )
MDBT - Back ground MRP ( Multilevel )
coming to ur query if all 20 materials belongs to one storage location or one MRP controller
Then you perform MRP for that 20 materials with the above given user exit
Also Plz refer my reply from this thread
[Re: MD01 Replanification.]
Regards
Madhu

How to set_value for non-table items.

I have a form, based on scott.emp, with a button and three fields, empno, ename and xxx. The empno and ename fields are based on the scott.emp table, whereas the xxx field is a non-table based field.
Setting xxx text type to either a text area or text box makes no difference.
The following code in the buttons PL/SQL Button Event Handler, Custom section results in a (WWV-00000) error.
begin
p_session.set_value(
p_block_name => 'DEFAULT',
p_attribute_name => 'A_XXX',
p_value => 'Hello');
end;
However, if I change the p_value to ename, a table based item, the code works as expected.
I ran across a post that had the following link
Re: transactions
Regarding setting values for non-table items. Unfortunately, the post was made prior to the latest discussion forum reorganization, so it's no longer valid.
I would appreciate any help on the problem.
Thanks, Larry

Hi,
Try using set_value_as_string
begin
p_session.set_value_as_string(
p_block_name => 'DEFAULT',
p_attribute_name => 'A_XXX',
p_value => 'Hello');
end;
Thanks,
Sharmila

For non Stock items ?

Hi ,
For non stock items (which do not have material code ) , what price we will put in PR ?
In live scenario, suppose a requestor from HR dept is raising a PR for non stock material.
Suppose the material is procuring for first time in that company .
He doesnt know the price for that .
So what price he will put in the PR?
Please tell me in live scenarios , what people used o do ?
regards,

Hello Sandeep,
While creating purchase requisition, normally user dept will put the approximate price for that material/service. sometime user will put even price as 0.01 (currency) also in PR and purchasing dept will put the negotiated price at the time of Purchase order creation.
Hope this helps.
Regards,
Arif Mansuri
Reward if answer is helpful.

MIRO slow for non excise items

Hi Experts,
When i do MIRO for Excise items it only takes 3-4 minutes but for non excise items it takes 25 minutes approx.
WHen i enter the PO number it takes 5-10 minutes to get the PO item list. When i change the tax it again take 5-10 minutes
Overall posting MIRO for non excise item it takes 25 minutes
I also tried indexing on MSEG: MANDT LFBJA LFBNR LFPOS & MSEG EBELN EBELP but it also didnt work out.
Can anyone please elp me on this.
Regards,
Nik

If not already performed, check the following OSS botes (there are many others, check for you configuration)
- [Note 759703 - Performance problems in MIRO|https://service.sap.com/sap/support/notes/759703]
- [Note 1085468 - Performance issue in MIRO transaction for Indian companies|https://service.sap.com/sap/support/notes/1085468]
- [Note 158519 - Performance optimization in logistics invoice verification|https://service.sap.com/sap/support/notes/158519]
Also try to use tools like SE30, ST12 or ST05 to find where is the bottleneck.
Regards,
Raymond

Delivery date for Non stock items

Hi,
While creating Maintenance order for Non stock items in component screen planned delivery time fld comes. Here
I put 10 days. But system creates PR with delivery date as today's date ie order creation date.
Actually delivery date should be 20.09.2009.
Waiting for your valuable inputs.
Thanks
Prasad

Hi,
The requisition delivery date is dependent on the operation start date. System does not consider the planned delivery time when calculating this delivery date.
The delivery date is based on the following calculations:
- The start date of the operation
- Minus Goods receipt processing time of the component
- Plus or Minus Lead time offset for the component in the order
The above values can be adjusted to manipulate delivery date.
As mentioned, It is also possible to influence this date by implementing exit COZF0002.
-Paul

Ship to address required for non-billable items?

Similar Messages

Maybe you are looking for