Shopping Cart needs to be Held Status when created from Upload Program

Hi All,
Shopping Cart is created from Custom Upload Program. In Upload Program, we used BBP_PD_SC_CREATE, BBP_PD_SC_UPDATE, BBP_PD_SC_SAVE and BBP_PD_SC_COMMIT.
Once the Shopping Cart is created from this upload program, I want ot put Shopping Cart as Helad Status.
I exported the parameter I_PARK as 'X' in BBP_PD_SC_CREATE and BBP_PD_SC_UPDATE. But it is not working i.e., the SRM system is not keeping the Shopping Cart as Held Status.
Scenario:
I am uploading the Shopping Cart Items (Shopping Cart creation) on behalf of my manager. My manager has to approve Shopping Cart.
If shopping cart is created maually and Shopping cart value is within the spending limit, work flow is not triggered approval proceess. If I am creating shopping cart behalf of some one, I am adding the approver manually while creating.
When ever we create shopping cart through custom upload program, the shopping cart needs to be approved by the Requestor (my manager, to cross check shopping cart items). So I want to park the Shopping Cart and I want to add Approver as my manager.
Please suggest me or guide me to get the solution for my issue.
Thanks,
Sudarsan
Edited by: KOYYA SUDARSANA NAIDU on Nov 14, 2008 9:12 PM

Completed

Similar Messages

Shopping cart changeable after follow-on document is created

Hi,
Something strange in the production env. I'm on SRM 7.
I create a shopping cart. It gets automatically approved and creates a PO in the backend.
After this when i open the shopping cart and click on the 'Edit' button, the system opens the shopping cart in edit mode
I'm able to save new line items. New lines items are displayed with 'Approved' status
This is not the right behaviour. Strangely this does not happen in our development system
Any solution / notes ?
Rgds
Venkat

Hi
I think whatever role it may be but system should not allow to edit the shopping cart ITEM after creating follow on docuement.
What is the item status of shopping cart . Is it follow on document deleted? OR Error in process?
Muthu
Edited by: Muthuraman Govindasamy on Dec 31, 2010 6:24 AM

User statuses on notifications should carryover to order when created from

Hi,
I have requriement for user statuses on notifications (IW21/22) should carryover to order when created from notification automatically.
Did anybody worked on this type of scenerios. I already found some userexit (QQMA0014) but i could not able to find any thing related to user status in VIQMEL view.
At the time of creation of notification IW21, when i go for creation of order, User status of notification should copied to order automatically.
Appreciate any help.
Regards
MM

Thanks Anji for your response.Yes there is FM status_read which i can use to get Status but my problem is during creation of order from notification, i don't have notification number so i can't use any database tables to get status for later use. As per requirment, during creation of notification, I can go to order creation. at that time whatever user-status I choose at notifcation, same status should get copied to order. I hope it got clear to you now.
Please suggest.
Regards
MM

Excel extractor produces error "Error 8 when compiling the upload program"

I am trying to test a new Excel extractor I've created but when I do so I get the following error:
RSAR233
Error 8 when compiling the upload program: row 446, message: A newer version of data type /BIC/B0000788000 was
I've tried reactivating transfer structures and transfer rules but with no success. When I activate the transfer structures I can see in the status bar briefly a message refering "Activating Structure /BIC/B0000788000". I am assuming it's the technical name of the structure which supports the extraction.
Any ideas?
Thanks for the help.

OK, I can see your point. The Communication structure fields have data types, CHAR, CURR and DATS (those are the data types for the info-objects I am trying to load).
But if I try to assign the same data types to the objects of the transfer structure which match the flat file I get errors like "Invalid data type (DATS) for source systems of type Ext. System.". What I understand this means is that I cannot use data types other than CHAR in the flat file structure so how can I assign data from a CHAR flat file to a DATS destination object? Do I need some kind of conversion? How? Do I really need a routine in the transfer rules?

Firefox wont open webpage when linked from another program

When linking from other programs, a new firefox window will open, but displaying a blank page instead of loading the page. I checked for firefox being the default web browser, but I cant figure out what other options may be important. It actually started happening when upgrading to Ubuntu Natty, did not happen when using ff 4.0.1 on maverick. Any Ideas? Thanks for the help.

First and foremost, please update Firefox to '''3.6.17''' by clicking '''Help'''| '''Check For Updates'''.
The reason for this is because there was a security breach at Comodo which is an SSL certificate provider recently whereby a number of fraudulent certificates were inadvertently issued. These allow a hacker to impersonate any site including online banking and the Firefox version you're running at the moment will not warn you that the site is a fake. The fraudulent certificates were blacklisted in v3.6.17 and beyond. 
See also: http://blogs.comodo.com/it-security/data-security/the-recent-ra-compromise/ 
As regards your problem, you may have a corrupt '''places.sqlite''' file.
Please see: http://kb.mozillazine.org/Locked_or_damaged_places.sqlite 
and [[Error loading web sites]]

Error when compiling the upload program (Message no. RSAR233)

Hello,
I tried to upload data from a flatfile but I did modified the Comm.Structure, Trans.Structure and Transfer Rules.
After activating the all changes, I check data from InfoPackage by previewing it. Unfortunately, I got the follow messages from the popup window:
Error 8 when compiling the upload program: row
227, message: Data type /BIC/CCABTWJI_STK01 was
found in a newer
I got this kind of problems many times. I solved it by create a new infosource and everything again. I don't think it's good idea to do this way.
Any better solution would be sincerely appreciated?
-WJ-

Another solution:
go out the transaction RSA1 ans return to the transaction RSA1 again.
This would help for me without restarting anything.
Thank you very much for all suggestion.
-WJ-

Error 8 when compiling the upload program: row 436

Hi all,
pls let me know how to solve this error
Error 8 when compiling the upload program: row 436, message: A newer version of data type /BIC/B0000582000 was
Thanks
Prashant

Hello SAP gurus.
I know it's a very long time the question was asked, but who cares if it can someday help somebody?
So i just faced the same issue, the solution was sample, i relaunch RSA1 and the problem was solved.
Hope i would be helpful
Salah

Error 8 when compiling the upload program: row

Error 8 when compiling the upload program: row
248, message: Data type /BIC/CCAWSAI_CID_TEXT was
found in a new
kindly help me out pls

Hi Raghu,
Error 8 Implies
The last words should be read as "was found in a newer version".
The system says that the active version of your Infosource is older then another version.
I'd recommend to delete Infosource - Source system assignment (with PSA tables etc.).
Then save (activate) the Infosource (communication structure). Then assign source system, create infopackage and load data again.
else..
Goto se38 and Run the program RS_TRANSTRU_ACTIVATE_ALL and relogin..
Plz look the link.
[Error when compiling the upload program (Message no. RSAR233) ]
Hope this helps...
Regards,
NR
Assign points if helpful...

Error 8 when compiling the upload program

When loading data to the Infocube it gives the following error
"Error 8 when compiling the upload
227, message: Data type /BIC/CCFBZ
found in a ne "
It doesnot go any further from thr infopackage also..

Error when compiling the upload program (Message no. RSAR233)

I1112 status of Shopping cart- Need to create a follow on document

Hello Experts,
I have one issue in which enduser had created a shopping cart and header status is approved but no follow on document is generated. at line item level the status is Error in Process.
When i ran the report BBP_ALERT_SB_NOTTRANSFERED. then my Shopping cart status changed from I1111(item in transfer) to I1112"error in transmission'..
In Applicaiton monitor : the message is Not transferred to backend and Shopping cart 3100001911: Follow-on document(s) not transferred. we are using Extended Classic Scenario and i dont know why we are getting this issue, we are getting this same issue only for 2 Shopping carts.
Please guide me how i can repost the document so that follow on document will get generated.
I am in ECS scenario with SRM 7.0
Help will be appriciated.
smriti

Hi,
If it is only the problem with only few carts, Check if any Short dumps are occuring in SRM as Well as in R/3.
We faced a simialr situation and observed that it was resulting in a short dump due to bad coding in one BADI.
regards,
MRao

Create a Purchase Order from a Shop Cart where Stock is held

A customer requires a shop cart user (Requestor) to decide that they would like to go to straight to Purchase Order for a Stocked Item rather than a reservation being created and stock being transferred from a remote storage location. The customer would like the Requstor to still have the Shop Cart availability subscreen in order to check stock but also be able to enter account (cost) assignment details within the shop cart.
Customer is on SRM_SERVER 550 SP14 with ERP ECC6 SP18.
I would appreciate if somebody could share their thoughts and ideas.
Regards, Kyle.
Edited by: Kyle Freeman on Jan 28, 2010 4:50 PM

Kyle,
We are on SRM 550 as well and although we haven't implemented any stores business process in SRM we did look into it in some detail.
If your store uses R/3 or ERP MRP processes then there is not a lot of advantage in transferring the stock replenishment to SRM, you just introduce more steps into what is already a fairly intensive process. If you do not use MRP then transferring stock replenishment to SRM may be the way to go depending on your line of business.
Basic process for using SRM with stores materials would be as follows.
1. Transfer Material codes from the back end system to SRM - needs to be done regularly especially if you are creating new materials all the time.
2. Make the store a business partner so that stock reservations process can be completed.
3. Put materials in an internal catalog and make the catalog only available to users who require goods from the store via the stock reservations process.
4. Also put the materials in another catalog where the source of supply is the external vendor who will deliver the goods to the stores for stock replenishment.
5. Only make this stock replenishment catalog available to users who are responsible for re-stocking the store.
You may already know that stores stock is normally held against a balance sheet account and not a cost center account so stores stock does not require a cost assignment unless you are generating a stock reservation for consumption against a cost center/order.
If you wanted to make both sources available to user i.e. store and external you would only have to make both catalogs available to them.
Hope these thoughts help
Allen

Changing line item delivery address in shopping cart need to reflect same in all line items

Hi All,
Need help on below,
I have a requirement that when we change the shopping cart line item delivery address same needs to reflect all line items.
Suppose a shopping cart having 3 line items 1, 2 and 3. if i change the delivery address of line item 1, the same needs to reflect the line item 2 and 3 as well.
In my case if we change the 1's delivery address, after processing its genrating the IDOC on line item wise not in the header wise. And same having the different delivery address.
Thanks in advance.
regards:
Ramesh

Hello Ramesh,
we can do this changes in BBP_DOC_CHANGE_BADI . Create a Implementation for the above BADI and Inside that Implementation BADI method just call the function module BBP_PD_SC_GETDETAIL for SC item details by passing the Header GUID.
Once you get the Partner table(E_PARTNER) details.. Keeping a loop on SC item(E_ITEM) and change address number(ADDR_NO) in Partner table when Partner function eq X( X is an partner function values which you define in SPRO.).
pseudo logic:
CALL FUNCTION 'BBP_PD_SC_GETDETAIL'
    EXPORTING
      i_guid    = l_guid
    TABLES
      e_item    = lt_item
      e_partner = lt_partner.
* Check for all the line items if vendor is assigned
LOOP AT lt_item INTO lwa_item.
    READ TABLE lt_partner INTO lwa_partner
                      WITH KEY partner_fct = '00000019'
                               del_ind     = space
                               p_guid      = lwa_item-guid.
    IF sy-subrc eq 0 .
   * modification of address number logic here in partner table
    ENDIF.
ENDLOOP.
All the best.
Regards,
Sankarbabu

Change the transaction status when creating a follow up activity

Hello All
We need to change the activity status if a follow up document is created from. E.g. If an activity is created type 001 then a follow-up activity type 003 as a follow up document from 001 the system automatically changes the activity status from open to in process. I need detailed steps regarding how to reach this
Regards
Jacopo

See if you can "exploit" CRM_COPY_BADI and function modules CRM_STATUS_CHANGE_EXTERN to change the User status or CRM_STATUS_CHANGE_INTERN for System status.

Do I need to backup my files when upgrading from tiger to leopard?

Not sure if I need to backup all my files before upgrading from Tiger to Leopard (to use a Mac Box Set), have bought a Seagate 1TB FreeAgent GoFlex Home hard drive to back up on. Was told I wouldn't need a WiFi router but have now discovered I would need a dual Ethernet port to be connected to the internet and the hard drive which my Mac mini only has access for one, either the internet or the hard drive. So I ask do I really need to back up before upgrading? or can you get dual Ethernet ports?

Only if your data has any value to you.
If everything works perfectly, you should lose nothing.
If anything goes wrong, it is possible to lose data.
Personally I don't want to trust my data to everything working perfectly so I back it up.
As to the question of dual ethernet ports, you don't need them actually. If you create a LAN with a router then the multiple ports on your router will allow you to connect to both the internet and disk at once.
Allam

Program rbdapp01 when called from a program is not working

Hi Guys,
I am calling the program rbdapp01 from a custom program to reprocess an inbound ASN with IDOC status of 64. The code is listed as below in the custom program.
SUBMIT rbdapp01
WITH docnum = i_report_tab-docnum
WITH p_output = C_FALSE
AND RETURN.
After the execution of the custom program, the IIDOC is not processed and it remains in the status 64 with a message "Re processing deleted , inbound delivery IDOC , ,". When I run the program in debug mode, I can see that the control is going into the rbdapp01 program. But some where along the line, it is failing for what ever may be the reason and it does not process the IDCO, but it only populates the message.
But when I execute the same program rbdapp01 for the same IDOC from SE38, the IDOC is processed fine.
Looks like, I am missing something when I am calling this program rbdapp01 in another custom program. Any advice is really appreciated.
Regards
Rupesh.

Hi,
Please make use of this method of submit
DATA : rspar_tab TYPE TABLE OF rsparams,
        rspar_line LIKE LINE OF rspar_tab.
rspar_line-selname = 'DOCNUM'.
    rspar_line-sign    = 'I'.
    rspar_line-option = EQ'.
    rspar_line-low     = .
    rspar_line-high     = .
    APPEND rspar_line TO rspar_tab.
SUBMIT RBDAPP01 WITH SELECTION-TABLE rspar_tab.
Try to implement this code, hope this help outs
Thanks & Regards
Suresh

Shopping Cart needs to be Held Status when created from Upload Program

Similar Messages

Maybe you are looking for