Short Inventory Report - BoM issue

I am having a problem with the below query, I want to mutiply T0.OnHand with quantity in BoM but the problem is that Items in (106) use one item which i want to use but it varies in quantity per product in BoM. Is there anyway to map each code to its corresponding quantity in BoM.
SELECT T0.[ItemCode], T0.[ItemName], T0.[OnHand], T0.[OnOrder] as 'Ordered',sum(T0.[OnHand]+ T0.[OnOrder]) as 'Available', T0.[InvntryUom] FROM OITM T0 WHERE T0.ItmsGrpCod in (106) and T0.[ItemCode] <> 'FC005' and T0.[ItemName] <> 'Financial Correction - WIP Fat' and T0.[ItemCode] <> '1100003' and T0.[ItemCode] <> '1200004' and T0.[ItemCode] <> '1301210001' and T0.[ItemCode] <> 'FC001' and T0.[ItemCode] <> '20301300' and T0.[ItemCode] <> '20301400' and T0.[ItemCode] <> '2301210090' GROUP BY T0.[ItemCode],T0.[ItemName],T0.[OnHand], T0.[OnOrder],T0.[IsCommited],T0.[InvntryUom]
Thanks,
Titi

Thanks a lot Gordon for the simplification, learning a lot through this forum, here is a my query hope it is more clearer..
Product has 6 components required in BoM, but I want to mutiply using only one component. Below I want to use only number one item in one of those two BoMs. But I have different defintions in BoM depending on size cause I have products ranging from 750, 5ltrs etc
e.g on I want to include this column (T0.[OnHand]*Quantity) as 'Consumed Olin' but in one there is 8.1 and the other has 10.1
750mls
#     Item No.     Item Description            Quantity       UoM
1     1200004          Olin (Wip)               8.1            KG
2     2402710022     Jerrycan 750mls Bottle      12          PCS
3     1402410023     Labels 750mls Litre Oil      12          PCS
4     2402210006     Carton            750mls      1          PCS
5     1402110027     Sealing Tape               1          MTR
6     2402710018     750mls Oil bottles (labelled)     1          PCS
5ltrs
#     Item No.        Item Description            Quantity                  UoM
1     1200004          Olin (Wip)                     10.1            KG
2     2402710022     Jerrycan 5ltrs Bottle          5          PCS
3     1402410023     Labels 5ltrs Litre Oil           5          PCS
4     2402210006     Carton            5ltrs Litre      1          PCS
5     1402110027     Sealing Tape                     1          MTR
6     2402710018     5ltrs ml Oil bottles (labelled)     1          PCS
Thanks,
TitiKoko

Similar Messages

Inventory Report # Values issue

Hi Experts,
we have below user requirment, where report is showing in # values for chars displaying key figures.
For a particular material we have batch , Movement type chars displayed as # and the KF Movement Quantity as 0.
we do have other KFs in the columns against the movement tyoe and batch apart from quantity KF.
Please find the screen shot below high lighted where user needs to remove # and the 0 from the display.
please help.
Thanks in advance.

Hi,
Check once this query is based on multi provider /CUbe/Dso , if it is multi provider # values are coming extra using constant selection we can remove .
Refer below :
http://help.sap.com/saphelp_nw70/helpdata/EN/46/91f0f090ea13e8e10000000a155369/content.htm
Thanks.

Authorization Issue in Inventory Reports

Hi Experts,
My clinet is using SAP B1 8.8 PL11 and we are facing issue in inventory report, we have set proper authorization for the user, but when that user try to open any inventory report, it allow to select paratmeters for the report but when he click on ok button to generate reports system throw erro YOU are not permitted to performed this Action.
We have given full authorization to for all inventory reports.
Pls. tell me if i missed something in general authorization.
Regards
Kamlesh Vagal

Hi Kamlesh...........
One Module is Report where Inventory reports are there.
think your have given authorization to this module, But another Inventory module is there
where Invetory reports are there. I guess you have not given the permission for this Inventory Reports.
Give Authorizations to both modules and then see the effect.
Regards,
Rahul

ICR process for Open item recon.(003) - Report Display issue

Hi All,
I am facing a problem in the data reconciliation report display.The document number "1212121212" doesn't not exist in the SAP system.But "1212121212" is used as the reference number in the another document which is created in the SAP.
Legacy data file.
RCOMP RASSC       DOCNR                ATYPE        RACCT      RTCUR     TSL
L001     U001     1212121212     C     CCU001     USD     200
In the data selection process, i am using the following inputs.
Company code - L001, U001.
Vendor - CCU001,CCL001.
Customer - CCU001,CCL001.
In the data assignment process, i am using the following inputs.
Company - L001, U001.
Trading Partner - L001, U001.
Rule - 300, 400.
Rule - 300 config.
200     DOCNR     Document Number     Equal     DOCNR     Document Number
Rule - 400 config.
200     DOCNR     Document Number     Equal     REFNR     Reference Number
In the reconciliation report display (right side bottom page),
U001->L001->Payables or other way around L001->U001->Receivables (Top Left side).In the either of the two display am able to see two items.
first item (not expected in the report display, bcoz there is no relevant data present in the legacy file).
TR.PT PRT.DOC.NO PR.CUR Amount DGC Difference Reference no
U001 1700036236      USD       500       USD   500          TEST
The first item exist in the SAP and it is getting selected during the data selection process.
second item (reconciled and expected in the report display)
L001     U001     1212121212     C     CCU001     USD     200
Kindly help.
Thanks in advance
Regards,
Karthik

Hi Ralph,
Yes we are having two company codes.your understanding on this point is rite.
I am using the standard file upload functionality from the presentation server for uploading the non-sap company data.since in the earlier thread i had explained very detail level, so now had made it short.
The only issue that I am having is that I have just one line item in my upload file and it is from non sap company L001 for trading partner u001. File gets loaded (data selected 1 correctly), Then after all the steps when I am in the last step (reconciliation) I see that line getting reconciled with other line available in U001 with zero difference. That looks good because it is matching as per my rule. but I am also seeing some other open items in U001 that are also getting reconciled with no lines in file with difference equal to their values. They should not show up in the bottom part of reconciliation part at all as they are still open in U001 and should not get reconciled until I put their offsetting lines in upload file from L001. So they should stay at the top right side in simple words I am seeing open items as well in reconciliation portion bottom one even I do not have any lines to reconcile them and they are showing a balance in them as well.
Thanks in advance.
Let me know, if you need any more details.
Regards,
Karthik

Inventory report with the last transaction details of each material

Hi,
is there any standard inventory report in SAP which gives us the last transaction details of each
Material,along with last procurement qty, value, date and last issue
details of Qty, Value & date.
Thansk in advance.

Hi
try following t-code
MB5B u2013 Stock on Posting Date
or
2 s_p00_07000139 u2013 Stock Card and Inventory Material Report
Regards
Kailas Ugale

-ve values in inventory report

Hi Experts,
I have inventory report, this report shows total stock, in this report some materials are showing '-ve' values,but in cube total issue stock and total received stock both are same, that means this inventory report should show '0' value.
for example: in cube total issues stock: 13.60, total received stock: 13.60. That means total stock is = 0 (13.60-13.60), but in report it is showing -13.60.
I am not understanding what is the problem,
Pl help to do this,
good answer will be appriciated.
thanks in advance,
Venkat

Hi Venkat,
The calculation's of Inventory total stock is not as simple as we understand them. To calculate total stock it consider different Movement type's, reversal entries, blocked stock etc. as well into consideration.
There is no -ve stock and there can be no as well, but still u r getting that (i also got that ) then this is how u can analyze at various points where exactly the problem is.
1. Try to run some standard report for total stock (based on inventory Cube 0IC_C03 i guess this is u usign probably). Check the stock value for 1 or two particular Material and cross check the stock of same material in your R/3 system through some tr MMBE.
2. If standard report gives u rite result then probably some logic problem in ur report.
3. Apart from that the main problem of this situation is data loading issue.
Please follow proper inventory data loading steps. If not done step by step u will end up with wrong data.
Hope these steps will help you out in tracking the situation.
Thanks
Dipika Tyagi

Report for Issued component Quantity vs Subcontracting PO component qntity

Dear Expert,
My client wants to know a report on issued Component quantity (what is issued against a Sub- contraction PO) with PO component quantity (what is maintained in a subcontracting PO component).
Is there any standard report available for the same?
Please suggest if any query report can be built or not.
Thanks in Advance
Regards
Rajib Debnath

Do you change child qty consumption in p.o BOM ?
Check it in mb51 541 mvmt for material for issued component quantity.
Also check reports MBLB,ME2O.
Can you explain term
Report for Issued component Quantity vs Subcontracting PO component qntity

Inventory Reporting

I'm running zfd 3.2 sp3. When i run software inventory reports in console
one, the reports list executables by their product names as opposed to the
executable name. For example, winword.exe is listed as msoffice 2003.
Msaccess.exe is also listed as msoffice 2003. Is there a way that I can
have the software inventory reports list just the exe's as opposed to the
product names? The custom scan editor requires that you know the file
names and sizes. This is difficult considering all of the iterations of
msoffice (office 2k, office 2k pro, etc). Any assistance on this would be
greatly appreciated.
AJ

Jacksona,
It appears that in the past few days you have not received a response to your posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Do a search of our knowledgebase at http://support.novell.com/search/kb_index.jsp
- Check all of the other support tools and options available at http://support.novell.com in both the "free product support" and "paid product support" drop down boxes.
- You could also try posting your message again. Make sure it is posted in the correct newsgroup. (http://support.novell.com/forums)
If this is a reply to a duplicate posting, please ignore and accept our apologies and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/

Prime Infrastructure 2.2- problems: Wired Detailed Device Inventory report not running / Cisco 5500 WLCs no listed in subgroup

New installation of Prime Infrastructure 2.2.0 (PI-VA-2.2.0.0.158.ova)
installed fixes/software/device packs:
PI 2.2.1 Poodle Fix (installed)
PI 2.2.1 Maintenance Release (installed,ncs stopped,rebooted)
Prime Infrastrucutre 2.2 Device Pack 3 (installed,ncs stopped,rebooted)
Licences installed (ncs stopped,rebooted)
Added all devices via Bulk Import (Inventory>Device Management>Network Devices)
Problem 1:
The Cisco 5500 WLCs are not listed in Inventory>Device Management>Network Devices (see screen shot) but listed under "All Devices"!
The Cisco 4400 WLCs and the 8500 WLCs are listed within their subgroup.
Devices are in "Managed State"
Problem 2: fixed! (Browser issue)
Problem 3:
Unable to run "Wired Detailed Device Inventory" report because I get the error message: Failed to run report: Unable to retrieve data for: Chassis Information (if Chassis Information is selected, if System Information is selected I get the error message with ...retrieve data for:System Information)
All devices do have an "Admin Status = Managed" and the Last Inventory Collections Status = Completed.
Has anyone the same issues or a tip for me?
Another topic, the "User Defined Fileds" are not exported when with running a "Device Export" (Inventory > Device Management > Network Devices). ;-(
BR
Bastian

Hallo Bastian,
I think you still have browser issue, Using IE is still the best with Prime.
I have exactly same prime 2.2 and installed fixes/software/device packs.
I have no problem I can see all views. I use now IE 11, with Chrome 42.0.2311.90 and firefox 37.01 I have problems too with lots of views. You have not tell what browser + version you have.
Since you have same prime 2.2 as me. I have other problems, can you check yours?
Can you see a functional CLI template page at Configuration > Templates > Features & Technologies:
https://supportforums.cisco.com/discussion/12481691/can-cisco-prime-22-still-do-simple-ad-hoc-deployment-job-cli-over-all-switches
Do you have SNMP Connectivity Failed while Verify Credentials has no errors all green and checked.
https://supportforums.cisco.com/discussion/12494786/snmp-request-exceeds-internal-data-buffer-512-bytes-prime-22-asa-5545

Software inventory reports being discarded

The software inventory reports are being discarded for our MP's, and I'm trying to determine why, so at the very least we can verify it's a non-issue. Attached is a copy of one of the discarded XML files. If anyone can take a look at it, or let me know what
I'm looking for (specific characters that would cause the xml to fail parsing and be discarded, or keywords, anything like that), would be much appreciated.
Discarded XML log

Enable Debug logging on MP, maybe this could give us more info of why the XML is discarded.
Juke Chou
TechNet Community Support

Inventory Report by Query

Dear All,
              I Need inventory report showing the item code and item description and a UDF. as under
I need to have selection criteria of FROM DATE and TO DATE, and in the report in Row wise it needs to show me the
Following Details of Items.
1) Opening Balances    of (From Date)
2) Received Quantity     In the Period of (From Date and To Date)
3) Issue Quantity           In the Period of (From Date and To Date)
4) FInal Stock                of (To Date)

Saludos
creo que esto te puede servir
Declare @FromDate Datetime
Declare @ToDate Datetime
Declare @Whse nvarchar(10)
Set @FromDate = (Select min(S0.Docdate) from dbo.OINM S0 where S0.Docdate >='[%0]')
Set @ToDate = (Select max(S1.Docdate) from dbo.OINM s1 where S1.Docdate <='[%1]')
Set @Whse = (Select Max(s2.Warehouse) from dbo.OINM S2 Where S2.Warehouse = '[%2]')
Select
@Whse as 'Warehouse',
a.Itemcode,
max(a.Dscription) as ItemName,
sum(a.OpeningBalance) as OpeningBalance,
sum(a.INq) as 'IN',
sum(a.OUT) as OUT,
((sum(a.OpeningBalance) + sum(a.INq)) - Sum(a.OUT)) as Closing
,(Select i.InvntryUom from OITM i where i.ItemCode=a.Itemcode) as UOM
from(
Select
N1.Warehouse,
N1.Itemcode,
N1.Dscription,
(sum(N1.inqty)-sum(n1.outqty)) as OpeningBalance,
0 as INq,
0 as OUT
From dbo.OINM N1
Where
N1.DocDate < @FromDate
and N1.Warehouse = @Whse
Group By
N1.Warehouse,N1.ItemCode,N1.Dscription
Union All
select
N1.Warehouse,
N1.Itemcode,
N1.Dscription,
0 as OpeningBalance,
sum(N1.inqty) ,
0 as OUT
From dbo.OINM N1
Where
N1.DocDate >= @FromDate and N1.DocDate <= @ToDate and
N1.Inqty >0
and N1.Warehouse = @Whse
Group By
N1.Warehouse,N1.ItemCode,N1.Dscription
Union All
select
N1.Warehouse,
N1.Itemcode,
N1.Dscription,
0 as OpeningBalance,
0 ,
sum(N1.outqty) as OUT
From dbo.OINM N1
Where
N1.DocDate >= @FromDate and N1.DocDate <=@ToDate and
N1.OutQty > 0
and N1.Warehouse = @Whse
Group By
N1.Warehouse,N1.ItemCode,N1.Dscription) a, dbo.OITM I1
where
a.ItemCode=I1.ItemCode
Group By
a.Itemcode
Having sum(a.OpeningBalance) + sum(a.INq) + sum(a.OUT) > 0
Order By a.Itemcode

Sccm 2007 Hardware inventory report

Dear Exprt,
How do i ensure SCCM client has seccessfully send H/W inventory report to MP with out any issue and when.
i have look the (InventoryAgent.log) and it did writen (Inventory: Successfully sent report. Destination:mp:MP_HinvEndpoint) but nothing update on server.
[email protected]

Use this blog post to find out where HW stops working.
http://be.enhansoft.com/post/2013/07/25/Troubleshooting-Inventory-Flow.aspx
Yes it is written for CM12 but it is still the same process as CM07.
http://www.enhansoft.com/

EOS / EOL / PSIRT report generation Issue

HI All ,
I am using lms 3.2 with RME 4.3.0
Recently i have seen 2 bugs related with EOS/EOL /PSIRT report generation issue
CSCta76147
CSCtc36563
The status of the bug is given as Fixed(verified )
Status
Fixed
(Verified)
Severity 3 - moderate
Last Modified
In Last Year
Product
CiscoWorks Resource Manager Essentials
1st Found-In
4.1
4.3
Fixed-In
5.0
Component(s)
eoxpsirtreports
Here the fixed release is given as 5.0 , can anyone please tel me where to get the 5.0 version for download .
( Is the 5.0 the LMS version or the RME version )
When i am trying to generate EOS/EOL report, i am getting error saying check the connectivity to cisco .
Regards
Angus

HI Afroj ,
When i am running the EOS/EOX or PSIRT report the job status is showing running but its not getting stoped .
I tried using the local option , downloaded the offline file from the below link and placed in
NMSROOT\files\rme\jobs\inventory\reports\EOX_PSIRT\local_xml
"http://tools.cisco.com/support/downloads/go/ImageList.x?relVer=4.1.1&mdfid=282635175&sftType=CiscoWorks+Resource+Manager+Essentials+Patches&optPlat=Solaris&nodecount=2&edesignator=null&modelName=CiscoWorks+Resource+Manager+Essentials+4.3&treeMdfId=268439477&treeName=Network+Management&modifmdfid=&imname=&hybrid=Y&imst=N&lr=Y
even then the job is running continuously its not stopping .
I have a RME version 4.3.0
Kindly let me know what i am doing is correct .
Regards
Angus

Inventory Report in C1

When starting a Inventory report in C1 I get this error:
ZENworks Reporting encountered an error because of Crystal Reports. For more
information, see the ZENworks error message online documentation at
http://www.novell.com/documentation
The Zen7 documentation give 2 reason vor this:
1. wrong/old MDAC (I have win XP SP2)
2. wrong snap-ins (I have install C1 on my PC und only copy the zen 7
snap-ins on it)
So I think there is an other problem.
Please help.
Thanks

Christian,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Do a search of our knowledgebase at http://support.novell.com/search/kb_index.jsp
- Check all of the other support tools and options available at
http://support.novell.com.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://support.novell.com/forums)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://support.novell.com/forums/faq_general.html
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/

Inventory Stock movement issue

hi gurus,
can anyone provide me the query for the inventory stock movement..
here is the my requirement
Period: ex Jan-2011
opening_balance , Total issued, Total Received and closing balance.
Thank you..

Hi Arun.......
Please run Inventory Audit Report. There you will get the Item cost of material as per FIFO Layer....
Its in Inventory> Inventory Reports>Inventory Audit Reports
Regards,
Rahul

Short Inventory Report - BoM issue

Similar Messages

Maybe you are looking for