Shots are all imported with sharpness +25% and brightness +50% :(

Hi!
That's boring, really, a have to remember to reduce brightness every time I import photos, for example in lightroom. Is there any way to get rid of that? Maybe someone knows where these settings are coming from? Is it possible that my camera (I got lumix DMC-FZ100 - no changable lens) writes them into its raw files?
Thanks in advance for any help!

The good news: Adobe allows defaults to be based on specific ISO values.
The bad news: Defaults can not be based on ISO ranges, so those defaults don't work if you use Auto-ISO (without defining a default for every possible auto-ISO setting your camera can come up with...).
I use CollectionPreseter to assign sharpness and noise settings based on ISO ranges (among other things). J.Friedl also has a plugin that can assign settings based on ISO ranges.
This is all personal stuff. I'm "hyper-sensitive" to the sharpness masking/detail artefacts, and so almost never use it, but some people love it.
I typically down-throttle sharpness detail to control noise amplification, instead of down-throttling sharpness amount or up-throttling masking - but it really depends on the photo... (and my mood ).
Note: noise reduction is adaptive, and so it doesn't need as much variation based on ISO as you might think.
My defaults - in general:
- the higher the ISO, the less sharpening detail, and more lum. NR; and higher sharpen radius plus increased sharpening amount.
Hot tip: 1st crank up the lum. NR detail slider to restore detail lost due to lum. NR before resorting to other means (at higher ISOs anyway). lum.NR contrast has an order of magnitude less impact than the lum. NR detail.
Another hot tip: a local with -50 sharpness masks all sharpening effects without blurring - its the closest thing Lightroom has to local noise reduction.
My default sharpening amount ranges from 35 to 50, but yours may be zero - again, personal style/taste (and also depends on lens quality and shooting skill / conditions...).
Sorry, I talk too much...
R

Similar Messages

Why is it that when I connect my iPhone 5S to my Windows Vista computer, the photos made with my iPhone are all of very low quality and most of them are turned upside down?

Why is it that when I connect my iPhone 5S to my Windows Vista computer, the photos made with my iPhone are all of very low quality and most of them are turned upside down?
On another note, the iPhone tells me that it's ''busy'' when opening a photo on the computer.
(I tried restarting my PC, connecting via another USB port, importing using PhotoStream, etc...)

Are you using the front or rear camera? When you say they are low quality, are you referring to file/pixel size, or how the picture looks? As far as upside down, how are you holding the phone? Older versions of Windows have issues reading the Metadata from the pictures and will not display the same.

I have an iMac, an iPhone, and a MacBook Pro. My full iTunes library is on the iMac and iPhone, but only a handful of songs are on my MacBook. They are all associated with the same Apple ID. How do I get all of my music on the laptop?

I have an iMac, an iPhone, and a MacBook Pro. My full iTunes library is on the iMac and iPhone, but only a handful of songs are on my MacBook. They are all associated with the same Apple ID. When I try to sync, I get a warning message stating that I will lose songs on my phone which aren't on the laptop. How transfer my music from my phone to the laptop?

Hey kbert73
I would do a transfer of purchases from the phone and not sync. If you sync then it will want to start over and sync music that is on the MacBook Pro. If you want to transfer the music, check out the article below that will give you multiple options on how to move. I have also provided on how to sync with multiple computers.
iTunes: How to move your music to a new computer
http://support.apple.com/kb/ht4527
Using iPhone, iPad, or iPod with multiple computers
http://support.apple.com/kb/ht1202
Thanks for using Apple Support Communities.
Regards,
-Norm G.

HT201363 My iPhone, iPad and iPod are all associated with the same Apple ID. How can I remove the iPod and associate it with a new Apple ID without affecting the data on the other devices (note: there is no data on the iPod I want to keep)?

My iPhone, iPad and iPod are all associated with the same Apple ID. How can I remove the iPod and associate it with a new Apple ID without affecting the data on the other devices (note: there is no data on the iPod I want to keep)?

Very simple. Turn off Find my iDevice, then Tap Settings, General, Erase, Erase all content and settings.

My BDOCs in CRM are all waiting with yellow status

I don't know why my BDOCs(transaction smw01) are all waiting with yellow status. Shouldn't they be automatically transfering data to my data source. If i manually process the BDOC then data goes to the datasource which can be seen via transaction RSA3. Help?
Message was edited by: Prakash Singh

hi Prakash,
again oss note 692195-FAQ: Sales Analytics and CRM-BW data Extraction ?
bwa5 and bwa7, delta is activated ?
and initialization performed in bw ?
626214 619122
3. If there are queues in SMQ1 with erroneous status then activate
   these queues.
   In Transaction SMQ1 if there are Queues existing with
   names beginning with CRM_BWAn (n is number) then
   activate these queues in the same transaction.
4.a)If required activate the datasource
    Go to transaction BWA5   > select the required datasource and
    activate.
4 b) The Delta may not be active ,activate the delta in BWA7 by
  selecting the name of the datsource and pressing the candle icon for
  'activate delta'.
Symptom
There may be problems or issues related to data tranfer from CRM to BW.
Other terms
CRM-BW extraction,upload,initial,delta,full upload ,Sales Analytics,
Reason and Prerequisites
There could be errors in customization or program errors due to which
data may not be transferred or incorrectly transferred to BW.
Solution
Question 1 : The Extraction from CRM to BW takes a very long time. What
can be done? (Performance Issues)
Question 2 : On executing transaction RSA3 I get records but I find 0
records when I load data from BW request.(No Data Available).
How can I extract data in this case?
Question 3 : The Deltas for my data source are not extracted . What can
I do?
Question 4: How can I extract the fields, which are not provided in the
standard data source extraction ?
Question 5: I am unable to extract user status correctly.What should I
do?
Question 6 : What can I do when the activity/Opportunity/Complaint
reasons(Code,CodeGruppe,Katalogart) are not extracted?
Question 7: What can I do if the deleted opportunities
are not reflected in BW?
Question 8: How do I activate the metadata?
Question 9: I donot get any records for the delta upload of my attribute
datasource(s).What is to be done?
Question 10: What do the status BWSTONESYS0 , BWSTONEUSS0,BWSTTECSYS0
and various other BW status mean ?
Solutions
Question 1 : The Extraction from CRM to BW takes a very long time. What can be done? (Performance Issues)
Suggestion 1: Please implement notes 653645 (Collective note) and
639072(Parallel Processing).
The performance could be slow because of the wrong control parameters
used for packaging.
You can change the package size for the data extraction.
Also note that changing the package size in the transaction SBIW
would imply a change for all the extractors. Instead, you could
follow the path in the bw system.
Infopackage (scheduler)    > Menu 'Scheduler'   > 'DataS. default data
transfer'   > maintain the value as 1500 or 1000(This value is variable)
The package size depends on the Resources available at the customer side
(The no of parallel processes that could be assigned =
1.5 times the no of CPU's available approx.)
Question 2 : On executing transaction RSA3 I get records but I find 0
records when I load data from BW request.(No Data Available)
Suggestion 2: First check if there are any entries in the table
CRMD_ORDER_INDEX.Only if there are entries in this table you can
extract records.
If this is not the case then,
It is possible that the user does not have sufficient
authorities for extraction of the relevant objects.
Additionally, please review and implement the following notes
615670
161570
150315
618953
If you are in the release 4.0 then
To do BW extraction with the user please see that the following
authorization object exists(display mode is enough):
CRM_ACT, CRM_OPP, CRM_LEAD, CRM_SAO, CRM_SEO, CRM_CO_SE, CRM_CO_SC
CRM_CO_SA, CRM_CON_SE, CRM_CMP, CRM_ORD_OP, CRM_ORD_LP, CRM_ORD_PR
CRM_ORD_OE, CRM_CO_PU, CRM_CO_PD, CRM_ORD_PO
(all these objects are linked to transaction crmd_order).
Question 3 : The Deltas for my data source are not extracted . What can I do?
Suggestion 3: Please check the following.
Please Check if the services have been generated in transaction GNRWB.
If they are not active(not marked 'X' before their names) then activate
the services following the steps here.
Go to transaction GNRWB
Select BUS_TRANS_MSG
Select (on the right, the services) : BWA_DELTA3, BWA_FILL, BWA_queue
Press Generate.
Also check for the following:
1. The delta should have been initialized successfully.
2. Confirm that all Bdocs of type BUS_TRANS_MSG
   are processed with success in SMW01.
3. If there are queues in SMQ1 with erroneous status then activate
   these queues.
   In Transaction SMQ1 if there are Queues existing with
   names beginning with CRM_BWAn (n is number) then
   activate these queues in the same transaction.
4.a)If required activate the datasource
    Go to transaction BWA5   > select the required datasource and
    activate.
4 b) The Delta may not be active ,activate the delta in BWA7 by
selecting the name of the datsource and pressing the candle icon for
'activate delta'.
5. In BW system
   Go to transaction RSA1   > modeling   > infosources   > select the
   infosource   > right mouse click on the selected
   infosource   > choose option replicate datasource
    Activate the infosource.
6. Go to the scheduler for the infosource   > select delta in the
    update >choose the option PSA only (in the Processing tab)
    > start immediately
Check the entry in the RSA7 in the OLTP(CRM system)
Question 4: How can I extract the fields, which are not provided in the standard data source extraction .
Suggestion 4: Follow the steps mentioned below.
1. Enhance Extract Structure with the required fields. (Create & include
   an append structure to the extract structure via transaction RSA6).
2.a) Release the fields of the append for usage. ( To do this, double
   click on the Datasource and remove the flags in the column 'Hide
   Field' for all fields of Append. )
2.b)If the new fields cannot be seen in the extract structure of
    the transaction BWA1 then change and save the datasource, and then
    activate it in RSA6.
3. Define your mappings in BADI (CRM_BWA_MFLOW) to fill these fields.
Goto SPRO .
Follow the path ->
SAP Implementation guide ->Implementation with other mySAP components ->
Data transfer to the Business Information Warehouse->
Settings for the application specific datasources (CRM)->
Settings for BW adapter->
Badi :BW adapter :Enhancement of datasources in messaging flow.
4. Replicate the new Datasource to BW.
5. Expand the Communication Structure in BW.
6. Maintain transfer Rules for the new Datasource.
7. Activate the trasfer rules and perform the upload.
Question 5: I am unable to extract user status correctly.What should I
do?
Suggestion 5 :Check the following notes
531875
616062
713458
700714
765281
Question 6 : What can I do when the activity/Opportunity/Complaint
reasons(Code,CodeGruppe,Katalogart) are not extracted.
Suggestion 6 :Check the following notes
481686
516820
603609
617411
711146
Question 7:Deleted opportunities are not reflected in BW.
Suggestion 7: Check the note 706327.
Question 8: How do you activate the metadata?
Suggestion 8:CRM BW adapter meta data has to be activated first before
it is available in the system. You can use Transaction BWA5 to copy the
meta data for selected DataSources. You can reach the transaction via
the IMG maintenance 'SAP Reference IMG -> Settings for SAP Business
Information Warehouse -> Activate BW Adapter Meta Data'. For more
information, see the documentation on the IMG activity 'Activate BW
Adapter Meta Data'. (Note 432485)
Question 9: I donot get any records for the delta upload of my attribute
datasource(s).What is to be done?
Suggestion 9: In case of attribute datasources, it is possible that the
entry for the GUID is missing in the table SMOXAFLD.
If , for example the datasource 0CRM_OPPT_ATTR is not giving deltas
then you can follow the steps:
1)If Delta process is active for the attribute datasource e.g.
     0CRM_OPPT_ATTR, then stop the delta process in the BW
     system
2) In the CRM system, Make the entry in the table SMOXAFLD
   for the datasource with the Key
   as 0CRM_OPPT_ATTR     GUID 3) Save the entry.Activate the datasource                           4) Check that the above entry is replicated in smoxafld_s also    after this.               5) Create a transport request manually for the following    object             R3TR   SMO4   0CRM_OPPT_ATTR
Question 10: What do the status BWSTONESYS0 , BWSTONEUSS0,BWSTTECSYS0 and various other BW status mean ?
Suggestion 10: The BW status are used to extract system and user defined
status.
The BW status are defined in the customization settings in SPRO.
Check for-> Status Concept for BP/Product/CRM objects
Here goto-> Process user status You will find the documentation attached here for the user status. Going inside the transaction you will find the status groups USS0, ZIOP,ZMOP etc. The names of the various BW status are derived from this For ex. BW + ST+ One + USS0 gives the name of the field BWSTONEUSS0 or BWST + ONE + ZMOP = BWSTONEZMOP (Master opportunity values) (which means BWST + (status group name) + status object group name) Double clicking on any of the object groups will take you to the values that these status can have . For ex. BWSTONEUSS0 in your system can have values E001 ,E002,E003,E007 which will be shown in RSA3 as BW status values 1,2,3,7, respectively.
Similarly we have Goto -> Process system status (in SPRO). Here you can get the values for the system status in exactly the same way as BWSTONESYS0(Lifecycle status) , BWSTTECSYS2 (Error) etc. In RSA3 you get the names as BW status, To know which corresponds to which status here,Goto the record list in RSA3 . Here goto Settings - Layout -Current . Right click -> Press Show technical field names . You will be able to see the BW status names and will be able to adjust the layout accordingly.

We have three Apple devices. They are all have the same name and are on the same apple ID. We would like to back up our Notes to the cloud. If we each create our own Apple email address will they create two separate Notes flies on the cloud or merge?

We have three Apple devices 2 IPhone 4's and one Ipad2. Only the Ipad2 is running the latest OS. They are all have the same name and are on the same apple ID. We would like to back up our Notes to the cloud. If we each create our own Apple email address (we don't have one yet) will they create two separate Notes flies on the Cloud or merge them?

Welcome to the Apple Community.
Separate Apple ID's will result in separate notes. However when you first start with separate ID's unless one of you erases the notes you have, you will both start off with the same set of notes, but from then onwards each set won't sync with each other.

IS - Retail, What are all the version currently available and what is lates

Hi,
What are all the version currently available and what is latest version?
Regards

Hi akshitha,
1. A logical database is in fact
a program only.
2. This LDB provides two main things :
a) a pre-defined selection screen
which handles all user inputs and validations
b) pre defined set of data
based upon the user selection.
3. So we dont have to worry about from
which tables to fetch data.
4. Moreover, this LDB Program,
handles all user-authorisations
and is efficient in all respects.
5. tcode is SLDB.
1. To get a taste of it.
2. create a new z program.
3. while creating type PNP
in logical database field.
4. paste this code and execute.
REPORT ABC.
infotypes : 0001.
TABLES : PERNR.
GET PERNR.
WRITE :/ PERNR-PERNR.
5. The selection screen which u see
is coming from logical database PNP program.
6. Execute
7. U will get a list of pernr.
SAPDBPNP
this is the main program of LDB PNP
which does the main work.
SAPDB + ldb name.
regards,
amit m.

My BDOCs(transaction smw01) are all waiting with yellow status

I don't know why my BDOCs(transaction smw01) are all waiting with yellow status. Shouldn't they be automatically transfering data to my data source. If i manually process the BDOC then data goes to the datasource which can be seen via transaction RSA3. Help?

Hi Kaushal,
I am also facing the similar problem as Prakash, I don't know why my Bdocs are all waiting with yellow status in smw01.I followed your steps but in SMOHQUEUE the status of the queue demon is Hold because of this the status of Bdocs are yellow.If yes would you pls tell me the steps to turn it to green.If i manually do(Reprocess or register that queue in smqr) everything is working fine but is there any way we can turn Bdocs from yellow to green automatically.I appreciate it in advance. If you find any doc. pls fwd it to [email protected]
Thanks a lot
With Regards
Nagamani.

HT1296 I'm having difficulty syncing my iCal between my home computer and iPhone. New entries from my home are not syncing with the phone and vice-versa. I didn't have any problems with this before until the latest phone update. Any suggestions?

I'm having difficulty syncing my iCal between my home computer and iPhone. New entries from my home are not syncing with the phone and vice-versa. I didn't have any problems with this before until the latest phone update. Any suggestions?

It could be that the existing wire in your appartment is not clean enough to provision DSL only. When combined with the phone possibly it has a higher line voltage and worked before. Now that the line is to be provisioned without phone service it may be giving them trouble that did not show before they came out and ran the new line test. So a new jack dedecated for your DSL line may require a new wire be run to your appartment. Also the account for internet only used to require direct billing to a credit card or something else. This was a number of years ago. Most accounts are linked to a phone number, and without a voice number it adds to the confusion.
If you are getting the voice and everything turned on as before, then I am at a loss for words.

Why are my HD videos all importing with different resolutions?

Hi, I tried looking through like 10 pages of discussions on here and didn't see anybody else having this problem.
I have a Canon Vixia HF200, I keep the settings on MXP (highest quality 1920 x 1080). Every time I log and transfer my videos they import at different resolutions (everything from the same day will be the same), some of them come in as 1440 x 1080, 720 x 480, etc, when they should all be 1920 x 1080.
So, since some of them ended up being a completely different aspect ratio, I went into Motion>Distort and changed them all to 1920 x 1080, and I thought it was fine, but now I'm noticing that some of the videos look really out of focus (it seems like they get more out of focus every time I open it), so I'm thinking I probably shouldn't have stretched them....
I checked the original videos in the browser and they all say 1920 x 1080 now, when I watch them in the viewer, they actually look like good HD videos, but in the canvas they're out of focus...
I'm also working with multiple sequences, and when I copy videos from one sequence to another, it changes the resolution/aspect ratio/scale again, and becomes more blurry when I try to fix it.
So basically, I have a huge mess. I'm working on editing a documentary that I'm making and now most of the video looks bad and I'm not sure how to change it back. I even tried starting a new project and importing the original videos, but they don't seem to have the original quality.
Anybody know how I can either fix this or somehow replace the clips in the sequence with the originals in the browser to at least get some quality back?
Also, a lot of the time when I render, I come back to the computer and it says something like "Error: Illegal (something) render failed" and completely loses the rendering that it spent a long time doing.
I appreciate any help.
Lisa

Hi Lisa,
Your 1920x1080 clips most likely import at their normal frame size, and then you placed them in the wrong sequence. Make sure your +File > Easy Setup+ is set to *Apple Intermediate Codec 1920x1080i60* before you create a new sequence.

I'm finding that songs that I have imported to Itunes are suddenly showing with "Exclamation" marks and Itunes tells me that the original file cannot be found. When I tell it to locate the file, it can't do it.

I'm finding that songs that I have imported into Itunes and played before are suddenly showing an"Exclamation" mark and Itunes tells me that the original file cannot be found. When I tell it to locate the file, it can't do it. I went to the Itunes help for locating files, but that still won't do it. It seems that somehow they are getting deleted, but not by me that I know of.
Can anyone help me?

Maybe you rename it. Somehow the path to the songs have changed if not deleted.
In Finder go to "Macintosh/Users/username/music/iTunes/iTunes Media/Music" that's where all your songs located so if those songs are not there you get an exclamation mark. You can delete those entries in iTunes and re-import again.

16-35 L USM lens and struggling with sharp focus and depth of field.

I just purchased the 16-35 L lens after reading all the reviews. I was previoulsy using the 24-70mm and was happy with the results. I am new to the Canon Mark 5D III and the new wide angle lens. I took pictures yesterday for over two hours and came back with no sharp images and no depth of field even when shooting at F/22. I zoomed in or moved close to my subjects expecting the images to be tack sharp but I am extremely disappointed. Not ONE of my pictures were tack sharp. What am I doing wrong? Are there correct settings for close-ups, landscapes and portraits with this lens? At F/22 I shoot 1/3 of the way into the picture expecting that everything in front and behind will be sharp. Not so. I am very frustrated as a newcomer to this camera. Please advise or guide me to a great source to learn.
thank you
Solved!
Go to Solution.

It'd really help to see an example, it's hard to guess without seeing it.
You shouldn't have to stop down to f/22 to get a large DoF at 16mm. In fact, part of what you might be seeing is softness from diffraction at that aperture. Try f/8, the DoF is actually quite wide at that aperture.
What shutter speeds are you at? Yes, you can get away with much slower speeds with UWA, but it can still soften images.
Lastly, I've never been able to get results out of an UWA like I can with longer lenses or a prime. I can get good results, and they clean up quite nicely in post, but viewing untouched photos at 100% it's never sharp like a good prime, or even a good tele really. So I don't know what you're expecting out of it. It usually doesn't matter since UWA are used for larger subject matter than the other lenses... but that has been my experience.

Can I use events imported with iMovie 11 and on exhard drive, in iMovie 6?

I would like to open DV files in iMovie6 which are stored on external hard drive (imported with iMovie 11). How do I do this please? Would there be any loss of quality even if I knew how to do this? I asked this question previously but I was a bit more 'confused' then.

Dear Tom, Thank you, thank you - it's so easy when you know how! I had previously dragged the folder over and it didn't come cleanly. Gosh. ' File' then 'Import '- it's magic really. Ta again.

Canadian BC users, how are you dealing with HST, GST and PST/QST?

Hi, I'm new here and I've been building my first BC eCommerce site for a client for almost a year. It's a business to business site, dealing with about 5000 SKUs. It's currently in trial mode, and we're about to go live with it. I have a problem with taxes I hoped I'd be able to sort out, but haven't found a solution.
My client's head office is in Ontario and they sell from there, and also from Quebec, though online sales will be limited from Ontario for now. Ontario, like B.C., where I am, and a number of other provinces have HST. The remaining provinces have GST and PST/QST, except Alberta, which only has GST. My client sells thoughout Canada, and also to the U.S.
Scenario 1) When one sells from an HST province to a customer in another HST province, the seller must collect and remit the HST for the buyer's province. For example, I work from B.C. with 12% HST, and my client has 13% HST in Ontario. I have to invoice them for my services, collecting and remitting 13% HST.
Scenario 2) When one sells from any province to a customer in a non-HST province other than Quebec, the seller charges GST and is encouraged, and depending on the province they are selling to, required, to register for that province's PST and collect and remit that tax as well. Otherwise the customer is required to self-assess the PST on the purchase.
Scenario 3) When one sells from any province to a customer in Quebec, they must apply the GST to the purchase, and then apply the QST (Quebec Sales Tax) to that total. Again, out of province sellers are expected to collect and remit the QST.
Scenario 1 is fine. Currently I've set up all HST provinces with their corresponding rate.
Scenario 2 is problematic from a legal taxation standpoint. I've set up all GST+PST provinces and Quebec with 5% GST only. This will not be acceptable to my client as their sales volumes are quite high and they have to remit other province's PST.
Scenario 3 seems impossible on BC, but will become a lesser problem until January 2013, when Quebec changes to Scenario 2 (i.e. the QST will no longer piggy-back the GST but will be raised so there is no change to the total tax)
Further, most businesses will want to see the GST and PST appear separately on the invoice, not calculated together as seems to be the case now.
Has anyone managed to set up GST and PST/QST in the system, so both taxes appear in the cart/checkout process, and separately on the invoice?
Thanks for any assistance!

This might require the discussion to move to the advanced code development section, but I'll post it here first anyway.
So after about 2 weeks, I'm not sure there's a solution to this. I've tried a variety of JavaScript and JQuery approaches to do a show/hide of the appropriate tag based on the province chosen in the {tag_shippingoptions} drop down. The cleanest way was with JQuery and I got it to work outside of Business Catalyst, but not when implemented in my cart.
The problems seems to be threefold.
1. The onchange of the "shipping state" dropdown calls ApplyTaxRate() in an unmodifiable back-end .js file. If I try to have local JS or JQ work on the same function call to do my show/hide, not only does the show/hide not work, but it breaks communication with the back-end .js so no taxes get calculated/updated.
2. If I create my own shipping menus calling the same functions (acutally just copy/pasted the inspected HTML), the taxes update OK, but the menu selections don't persist, AND if I then inject my show/hide, the show/hide doesn't work and all the functionality of the ApplyTaxRate function breaks.
3. If I try to call an additional function for the show/hide, from the onchange of my own menu, the ApplyTaxRate function works, but the additional fucntion doesn't work as it does outside of BC.
Here is my partial code. Any help?
<div class="shippingStateDiv"><span id="shippingStateSpan">Destination State<br />
            </span><select onchange="ApplyTaxRate(this.value,4638834,1,1,332304);taxDisplay(this.value);" class="shippingDropDown" id="shippingState" name="shippingState">
            <option value="-1">Please Select</option>
            <option value="147264">AB</option>
            <option value="130632">BC</option>
            <option value="147266">MB</option>
            <option value="130633">NB</option>
            <option value="130634">NL</option>
            <option value="130635">NS</option>
            <option value="147269">NT</option>
            <option value="147270">NU</option>
            <option value="130631">ON</option>
            <option value="147268">PE</option>
            <option value="147267">QC</option>
            <option value="147265">SK</option>
            <option value="147271">YT</option>
            </select></div>
<script type="text/javascript" src="http://ajax.googleapis.com/ajax/libs/jquery/1.7.2/jquery.min.js"></script>
        <script>
function taxDisplay(id) {
    var mySel = $("#shippingOptions").children("option:selected").text().replace(/\s/g,"")
    $('.answers').hide()
    $('.answer'+mySel).show()
</script>
<td><strong>
            <div class="answerPleaseSelect answers" style="display: none;">Choose Dest. State</div>
            <div class="answerAB answers" style="display: none;">GST: {tag_invoicetotaltaxamount}</div>
            <div class="answerBC answers" style="display: none;">HST: {tag_invoicetotaltaxamount}</div>
            <div class="answerMB answers" style="display: none;">{tag_invoicetotaltaxamount,MB,7,GST,PST}</div>
            <div class="answerNB answers" style="display: none;">HST: {tag_invoicetotaltaxamount}</div>
            <div class="answerNL answers" style="display: none;">HST: {tag_invoicetotaltaxamount}</div>
            <div class="answerNS answers" style="display: none;">HST: {tag_invoicetotaltaxamount}</div>
            <div class="answerNT answers" style="display: none;">GST: {tag_invoicetotaltaxamount}</div>
            <div class="answerNU answers" style="display: none;">GST: {tag_invoicetotaltaxamount}</div>
            <div class="answerON answers" style="display: none;">HST: {tag_invoicetotaltaxamount}</div>
            <div class="answerPE answers" style="display: none;">{tag_invoicetotaltaxamount,PE,10.5,GST,PST}</div>
            <div class="answerQC answers" style="display: none;">{tag_invoicetotaltaxamount,QC,9.975,GST,QST}</div>
            <div class="answerSK answers" style="display: none;">{tag_invoicetotaltaxamount,SK,5,GST,PST}</div>
            <div class="answerYT answers" style="display: none;">GST: {tag_invoicetotaltaxamount}</div>
            </strong></td>

HT204053 Our family uses one Apple ID for all of our iPhones. We installed the update and now we are all getting each others photos and texts. How do we stop this?

Our family uses one Apple ID for all of our iPhone 5's. We installed the update and now we are all receiving each other's pictures and texts. How do we stop this?

Have a look here...
http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l

Shots are all imported with sharpness +25% and brightness +50% :(

Similar Messages

Maybe you are looking for