Should 1  database  in ABAP  have one DBMS &  one KERNEL&BASIS SERVICES?

Q]
Relationgt to  ABAP basisc:-
Should 1  database  in ABAP  have one DBMS &  one KERNEL&BASIS SERVICES?

Hi,
Each database server in SAP will have one DBMS only.  You can navigate from sap ABAP easy access screen through the menu   System--> Status
Besides the navigate there will be yellow arrow mark [ System: Kernel information].  Here you will get the details of your dbms, kernel release and other related details.
Regards,
Sekhar

Similar Messages

  • How should i know that i have or already installed these in my database?

    my question regarding the steps in Post Installation Actions in installing patchset Oracle 9i Data Server 9.0.1 Patch Set 4 for Sun SPARC Solaris (32 bit Database)
    I'm not very sure about the instruction..
    How should i know that i have or already installed these in my database?
    Should i run all even if i don't know whether i use them or not?
    Or should i do nothing, and continue to my next patch installation?
    -Execute the following step only if you have JAVA enabled in your database:
    -Execute the following steps only if you have installed the Oracle Label
    Security option in the database you are attempting to modify:
    -Execute the following steps only if you have JAVA enabled in your database:
    -Execute the following steps only if you have installed UltraSearch in the
    database you are attempting to modify:
    -Execute the following steps only if you have installed Oracle Spatial or
    Oracle Locator in the database you are attempting to modify:
    -Execute the following steps only is you are using the RMAN catalog.:
    Plz advise..
    Regards,
    Rushdan Md Saad.

    It all depends. You don't NEED anything, Firefox runs just fine with it's default setup, and you don't need to install anything to fully experience the best of the web. But lets say you don't like ads. Install Adblock plus. Lets say you want to change themes, there are dozens of them. It's all personal preference.

  • HT4623 If I have an iPad one and it doesn't show I can update it what should I do

    If I have an iPad one and I have iOS 5.0.1 and it says I'm up to date what should I do

    For an iPad 1, you are at the max iOS version. It's due to the processor and low amount of RAM.
     Cheers, Tom

  • I am designing ABAP query in SQ01 i have not get one field MATNR

    Dear All,
    I am designing ABAP query in SQ01for MEK2 for Report.
    I  have not get one field MATNR
    I have two table konp and konh i have design in SQ1 i am not get field regarding this table .
    Please Help me.
    Thanks in Advance.
    Regards
    Kumar

    Dear Clemens
    I want MATNR FIELD related to these table.
    I am using KONP AND KONH TABLE .
    Regards
    Kumar

  • Should an abaper have  knowledge of creating purachse order and sales order

    should an abaper have  knowledge of creating purachse order and sales order
    if so how to create pls help me
    thanks in advance

    REPORT ZTEST_BAPI .
    *- BAPI related declarations
    DATA : g_pohdr TYPE bapimepoheader,
    g_pohdrx TYPE bapimepoheaderx,
    gt_poitem TYPE TABLE OF bapimepoitem,
    gt_poitemx TYPE TABLE OF bapimepoitemx,
    gt_posched TYPE TABLE OF bapimeposchedule,
    gt_poschedx TYPE TABLE OF bapimeposchedulx,
    gt_poacct TYPE TABLE OF bapimepoaccount,
    gt_poacctx TYPE TABLE OF bapimepoaccountx,
    gt_poservice TYPE TABLE OF bapiesllc,
    gt_posrvacc TYPE TABLE OF bapiesklc,
    gt_return TYPE TABLE OF bapiret2.
    perform prepare_header.
    PERFORM prepare_items.
    PERFORM prepare_schedule.
    perform create_po.
    *& Form prepare_header
    Set up header structure
    FORM prepare_header.
    g_pohdr-comp_code = '2000'.
    g_pohdrx-comp_code = 'X'.
    set up doc type
    g_pohdr-doc_type = 'NB'.
    g_pohdrx-doc_type = 'X'.
    g_pohdr-vendor = '0008000330'.
    g_pohdrx-vendor = 'X'.
    g_pohdr-langu = sy-langu.
    g_pohdrx-langu = 'X'.
    g_pohdr-purch_org = 'BA01'.
    g_pohdrx-purch_org = 'X'.
    g_pohdr-pur_group = '800'.
    g_pohdrx-pur_group = 'X'.
    g_pohdr-currency = 'USD'.
    g_pohdrx-currency = 'X'.
    ENDFORM. " prepare_header
    *& Form prepare_items
    Set up item values
    FORM prepare_items.
    DATA : ls_poitem TYPE bapimepoitem,
    ls_poitemx TYPE bapimepoitemx.
    ls_poitem-po_item = '00010'.
    ls_poitemx-po_item = '00010'.
    ls_poitemx-po_itemx = 'X'.
    ls_poitem-short_text = 'ABSORBER,SHOCK:PALLETIZER'.
    ls_poitemx-short_text = 'X'.
    ls_poitem-material = '000000000001070062'.
    ls_poitemx-material = 'X'.
    ls_poitem-vend_mat = 'xyz'.
    ls_poitemx-vend_mat = 'X'.
    ls_poitem-quantity = '100'.
    ls_poitemx-quantity = 'X'.
    ls_poitem-po_unit = 'EA'.
    ls_poitemx-po_unit = 'X'.
    ls_poitem-po_unit_iso = 'EA'.
    ls_poitemx-po_unit_iso = 'X'.
    ls_poitem-net_price = '6.32'.
    ls_poitemx-net_price = 'X'.
    ls_poitem-price_unit = '1'.
    ls_poitemx-price_unit = 'X'.
    ls_poitem-item_cat = 'D'.
    ls_poitemx-item_cat = 'X'.
    ls_poitem-plant = '1575'.
    ls_poitemx-plant = 'X'.
    ls_poitem-ACCTASSCAT = 'K'.
    ls_poitemx-ACCTASSCAT = 'X'.
    ls_poitem-acctasscat = <fs_req>-knttp.
    ls_poitemx-acctasscat = 'X'.
    ls_poitem-distrib = <fs_req>-vrtkz.
    ls_poitemx-distrib = 'X'.
    ls_poitem-part_inv = <fs_req>-twrkz.
    ls_poitemx-part_inv = 'X'.
    ls_poitem-gr_ind = <fs_req>-wepos.
    ls_poitemx-gr_ind = 'X'.
    ls_poitem-gr_non_val = <fs_req>-weunb.
    ls_poitemx-gr_non_val = 'X'.
    ls_poitem-ir_ind = <fs_req>-repos.
    ls_poitemx-ir_ind = 'X'.
    ls_poitem-agreement = <fs_req>-konnr.
    ls_poitemx-agreement = 'X'.
    ls_poitem-agmt_item = <fs_req>-ktpnr.
    ls_poitemx-agmt_item = 'X'.
    ls_poitem-preq_no = <fs_req>-banfn.
    ls_poitemx-preq_no = 'X'.
    ls_poitem-preq_item = <fs_req>-bnfpo.
    ls_poitemx-preq_item = 'X'.
    ls_poitem-preq_name = <fs_req>-afnam.
    ls_poitemx-preq_name = 'X'.
    ls_poitem-pckg_no = <fs_req>-packno.
    ls_poitemx-pckg_no = 'X'.
    APPEND : ls_poitem TO gt_poitem,
    ls_poitemx TO gt_poitemx.
    ENDFORM. " prepare_items
    *& Form prepare_schedule
    Schedule data
    FORM prepare_schedule.
    DATA : ls_posched TYPE bapimeposchedule,
    ls_poschedx TYPE bapimeposchedulx.
    ls_poschedx-po_item = '00010'.
    ls_posched-po_item = '00010'.
    ls_poschedx-po_itemx = 'X'.
    ls_posched-delivery_date = '10/31/2005'.
    ls_poschedx-delivery_date = 'X'.
    ls_posched-quantity = '100'.
    ls_poschedx-quantity = 'X'.
    ls_posched-preq_no = <fs_req>-banfn.
    ls_poschedx-preq_no = 'X'.
    ls_posched-preq_item = <fs_req>-bnfpo.
    ls_poschedx-preq_item = 'X'.
    APPEND : ls_posched TO gt_posched,
    ls_poschedx TO gt_poschedx.
    ENDFORM. " prepare_schedule
    *& Form create_po
    Create PO with ref to the req
    FORM create_po.
    DATA : lt_return TYPE TABLE OF bapiret2,
    l_ponum TYPE banfn.
    CALL FUNCTION 'BAPI_PO_CREATE1'
    EXPORTING
    poheader = g_pohdr
    poheaderx = g_pohdrx
    testrun = 'X'
    IMPORTING
    exppurchaseorder = l_ponum
    TABLES
    return = lt_return
    poitem = gt_poitem
    poitemx = gt_poitemx
    poschedule = gt_posched
    poschedulex = gt_poschedx
    poaccount = gt_poacct
    poaccountx = gt_poacctx
    poservices = gt_poservice
    posrvaccessvalues = gt_posrvacc.
    APPEND LINES OF lt_return TO gt_return.
    IF NOT l_ponum IS INITIAL.
    MESSAGE s398(00) WITH 'Purchase document ' l_ponum
    ' successfully created'.
    ENDIF.
    ENDFORM. " create_po
    <b>Reward points</b>
    Regards

  • I spill all my coffee on my new MacBook Air, its not working anymore, what should i do ? I have to buy a new one coz its pricy to fix it.

    I spill all my coffee on my new MacBook Air, its not working anymore, what should i do ? I have to buy a new one coz its pricy to fix it.

    Liquid spills, why your MacBook chassis is a one-way valve for spills
    After a substantial spill many people will turn their notebook upside down and shake it, not only does this not work, but it spreads liquid havoc throughout your machine and makes things often as bad as possible.
    The keyboard itself acts like a one way valve in the case of a substantial liquid spill. While liquid pours into the bottom chassis easy, it does not come out easily at all, and in the case of any spill, most of it will not come out by turning it upside down. Disconnect all power and contact Apple for diagnostics and repair.
    Do not attempt to, after a spill, ‘dry out your MacBook’ and test it
    After a spill most people invariably try to “dry out” their notebook by various methods, including hair dryers and otherwise. This both does not work, and after a substantial spill of any magnitude, even if the liquid was water, residue is left behind.
    There are additionally many very tight places inside your notebook where liquids will linger for a very long time, and cause corrosion or worse.
    Immediately unplug your notebook and contact Apple for in shop diagnostics and parts replacement.
    In the case of very minor spills people will “dry out” their notebook and feel success that their notebook is working ok, however invariably in nearly all instances after 4-14 days an error / fault pops up and is usually followed by more.
    In case of a spill, damage estimates are impossible,.....anything can be fixed, without question.......the question is cost.
    contact Apple for in shop diagnostics and cost estimation ....possible parts replacement.  

  • Add multiple users to a certain database in the SQL server in one go

    I wonder if there is any method to add multiple users to a certain database in the SQL server in one go and without using transact code.
    I can add a single user to a certain database “Q” for example by right click on the user “U1” for example then properties then in user mapping tab select
    the database “Q”, so there should be a method to add multiple users ( U1,U2,U3…) to this database?
    Best Regards,
    Ahmad

    Many thanks Visakh16,
    I can do this using the below script, but what I am searching for is do to this without any scripting.
    USE TestDatabase; --Make sure you have the right database
    DECLARE @sql VARCHAR(MAX) = '';
    SELECT @sql = @sql + 'CREATE USER ' + name + ' FOR LOGIN ' + name + ';
    ' +
    'GRANT CREATE TABLE, CREATE PROCEDURE, CREATE VIEW, VIEW DEFINITION TO ' + name + ';
    FROM sys.server_principals p
    WHERE p.type in ('S','U') -- SQL Logins and Windows Login. Do not change!
    and p.name in ('U1','U2','U3'); -- List of names to add. alter to suit
    PRINT @sql; -- Show the statements being executed in the messages pane
    EXEC(@sql); -- Run the statements that have been built
    Thanks,
    Ahmad

  • Object would have more then one attribute with the tag :VALUE

    I'm creating a new component in Ultiboard - a 100 pin connector.  This connector (Hirose) has 4 rows of 25 pins. Alternate rows are staggered. I'm trying to name each pin with it's appropiate name: A1, A2, A3 ....A50. Then B1, B2, B3 .....B50.
    When I change the VALUE or NUMBER attribute, I get the DRC error  message:
    This action cannot be completed because the resulting Object would have more then one attribute with the tag :VALUE
    Please remove one of the attributes and try again.
    Okay, so I've tried deleting the tag and now I can't name the pin at all. 
    What am I missing?

    You should be in the footprint editor to edit the pin name.  Select tools>>Database>>Database Manager, highlight the component in your database and click on the Edit icon.  In the footprint editor, double click on the pad and a SMT or THT pin Properties dialog appears, select the Attributes tab and highlight the Number row, press the change button and you should be able to change the pin name.   
    Tien P.
    National Instruments

  • Logical Database in Abap Objects

    Hi to All
    I want do it a program report using a Logical Database.
    Is this possible ??? But when I make a GET <node>, occurs the following error:
             "" Statement "ENDMETHOD" missing.  ""
    I'm doing the following:
    CLASS MONFIN IMPLEMENTATION.
           METHOD TRAER_DATOS.
                   GET VBRK.
           ENDMETHOD.
    ENDCLASS.
    Please, somebody tell me how I use the logical database in Abap Objects.
    Thank you very much
    Regards
    Dario R.

    Hi there
    Logical databases whilst of "some use" are not really part of OO.
    If you want to use a logical database in an abap OO program I would create a special class which just does the get data from your DB and pass this either at record or table level.
    Techniques such as GET XXXX LATE aren't really part of any OO type of application since at Object Instantiation time you should be able to access ALL the attributes of that object.
    As far as OO is concerned Logical databases are a throwback to "Dinosaur Technology".
    Since however modules such as SD and FI are still heavily reliant on relational structures (i.e linked tables etc)  then there is still some limited life in this stuff but for OO try and solve it by another method.
    If you really must use this stuff in OO then do it via a FMOD call and save the data in a table which your method will pass back to your application program.
    You can't issue a GET command directly in a method.
    Cheers
    Jimbo

  • When one or more family members who have been sharing one iTunes account wants to create their own iTunes account can they each upload the music/apps from the shared iTunes on their devices to the new iTunes account?

    When one or more family members who have been sharing one iTunes account wants to create their own iTunes account can they each upload the music/apps from the shared iTunes on their devices to the new iTunes account? 

    Yes. I would clarify your statement about the "shared" iTunes Library though. If you want each iOS device to have its own music library, you should create separate user accounts for them. Read:
    iTunes: How to share music between different accounts on a single computer
    How to use multiple iPods, iPads, or iPhones with one computer

  • Can I have more than one e-mail address attached to my apple account?

    I can't seem to create different FaceTime accounts using different e-mail addresses but with 1 Apple account. My daughter's IPod is attached to my Apple account, but I want to use her e-mail address for her FaceTime app. Any thoughts?

    Cessna007 wrote:
    how do i sign up for a new e-mail address @icloud or @me; and can I have more than one e-mail address?
    You create an @icloud.com address in the first place by signing into Settings>iCloud with your Apple ID and choosing an addres - you can only create an @icloud.com address, not @me.com.
    Then if you want further addresses on the same account you can add up to three 'email aliases' - these are additional addresses (not accounts) which deliver into the same inbox as the main account. (In fact it's a good idea to give out alias addresses, rather than the main address, because if they attract spam you can easily change them.) (New aliases can only be @icloud.com ones; @me.com addresses cannot now be created.)
    You should be aware before you start that once you've created an alias you cannot turn that address into a full iCloud account or move it to another account.
    More information on aliases here: http://help.apple.com/icloud/#mm6b1a490a

  • How do i sign up for a new e-mail address @icloud or @me; and can I have more than one e-mail address?

    how do i sign up for a new e-mail address @icloud or @me; and can I have more than one e-mail address?

    Cessna007 wrote:
    how do i sign up for a new e-mail address @icloud or @me; and can I have more than one e-mail address?
    You create an @icloud.com address in the first place by signing into Settings>iCloud with your Apple ID and choosing an addres - you can only create an @icloud.com address, not @me.com.
    Then if you want further addresses on the same account you can add up to three 'email aliases' - these are additional addresses (not accounts) which deliver into the same inbox as the main account. (In fact it's a good idea to give out alias addresses, rather than the main address, because if they attract spam you can easily change them.) (New aliases can only be @icloud.com ones; @me.com addresses cannot now be created.)
    You should be aware before you start that once you've created an alias you cannot turn that address into a full iCloud account or move it to another account.
    More information on aliases here: http://help.apple.com/icloud/#mm6b1a490a

  • Can I have more than one Apple TV in my home on one account?

    I want to buy an Apple TV for my daughter and allow it to access my iTunes account. I already have an Apple TV in use in my home.
    Can I have more than one Apple TV in my home on one account?

    yes
    they access the computers shared itunes lib all the ios devices and appletv's and other computers on your network can access your shared itunes lib and all of them can use your appleID should you so choose

  • I have Itunes on one computer in my home , have purchase 2nd laptop ,I want to put my Library on the new lap top , already downloaded Itune s. How to I go about it ?

    I have Itunes on one computer , purchased a 2nd laptop , I want to put my library a new laptop , I,ve already doenloaded Itunes , how/can do I do it ? Thanks

    This should help.  iTunes: How to move your music to a new computer
    In iTunes on the new laptop, go to the menu bar, click Store  /  Authorize This Computer.

  • HT2731 can i have more than one apple id on a computer? As when we go away we want to facetime from our macpro to our main mac at home and both are registered under the same apple ID. Thanks

    Can you have more than one apple id on a computer. We are going away and want to facetime from our macpro to the mac computer at home but both are registered under the same apple ID. What should we do ?

    I will share with you what I have done to manage this with my family.  While the solution isn't without flawes, it seems to do the trick.  First, you need to have one person who is managing the synching of everyone's devices.  In my family, I have three iphones, about to be four, and five ipads.  We all synch to the same apple ID to allow one another to take seemless advantage of our Itunes, which is on our Imac.  To synch individual music or video interests, we simply select which playlists we want and manually synch that way.  A couple of us use imatch and the cloud to make the entire library accessable as well.  With respect to the imessage, mail, contacts, etc. we each have a gmail account for our individual emails, contacts etc.  So for instance, my forth grade daughter has a gmail account that we choose to synch her contacts, calendar, etc to and then that is also the account where she receives her imessages from on her ipad and itouch. My son, who has an iphone and ipad, does the same thing, but under settings, he goes to imessage and checks his phone number and his email as his preferred way to receive imessages and texts.  My wife and I do the same thing.  To avoid having everyone see one anothers contracts etc, we only synch contacts from our individual email accounts.  Here is the downfall to this:  When you update your phone or add a new device, apple always wants to reset everyone's facetime and imessage settings and then low and behold we are all receiving imessages from one another's friends etc.  To work around this, I simply take each of their devices and go to their imessage settings and only check the email and phone numbers relative to their devices.  I dont' know is this is the best solution, but it seems to work for us. 

Maybe you are looking for