Should not come to AE when the IDOC segment missed

Hi,
I 've done the multimapping from IDOC to mul.files.
Here my sender IDOC line Item contains 2 segments.
Let us assume the first segment named Z1CONSGROUP and having some fields which has mapped to my receiver end files.
In production system we should not have the case where there is no Z1CONSGROUP segment.
Here if the IDOC doesn't contain this segment then it's a payload error and it reached to RWB status : system error.
But, i want to prevent this in production when this Z1CONSGROUP segment doesn't contain the idoc it should n't reach to AE.
How can i do that...is there any option to maintain such a scenario in XI.
Please help me out on this.
Kind regards,
Y.Raj

>
YeswanthRaj Kumar wrote:
> Hi,
> I 've done the multimapping from IDOC to mul.files.
> Here my sender IDOC line Item contains 2 segments.
> Let us assume the first segment named Z1CONSGROUP and having some fields which has mapped to my receiver end files.
> In production system we should not have the case where there is no Z1CONSGROUP segment.
> Here if the IDOC doesn't contain this segment then it's a payload error and it reached to RWB status : system error.
> But, i want to prevent this in production when this Z1CONSGROUP segment doesn't contain the idoc it should n't reach to AE.
> How can i do that...is there any option to maintain such a scenario in XI.
> Please help me out on this.
>
> Kind regards,
> Y.Raj
the easiest thing to do is,
1. Use a condition on Z1CONSGROUP and use the EX operator (ref: /people/shabarish.vijayakumar/blog/2006/06/07/customise-your-xpath-expressions-in-receiver-determination)
2. if the EX gives you a fail, then provide no receiver and use the option 'Options for Behavior at Runtime If a Receiver Is Not Found' -> End Message Processing Without Error (Restart not Possible)
3. Else provide the right receiver and let the flow continue.

Similar Messages

Exchage rate should not come during payment to the vendors

Hi Sap Experts,
My client have some different requirement,
At the time of MIRO system is picking the Exchange rate from OB08 table and converting to company code currency. When will make the payment to vendor, through company code currency system is picking exchange rate from OB08 table and it is showing exchange rate Gain/loss Account, which our client does not required.
At the time of payment to above vendor, system should picking only liability created value and should not show any exchange rate difference.
Thanks in advance
kareem

Hi,
If exchange rate is same at the time of invoice and payment then there will be no issue.
But when there is difference you have to show the Gain and loss in your account.
Otherwise how will you entry match.
Eg invoice 100 USD with exchange rate is 50 INR
When you are paying 100 USD exchange rate is 51 INR
Then entry will come as
Vendor A/c 5000 Dr
Loss Exhange rate 100 Dr
To Bank A/c 5100 Cr
If you don't show the loss how will you match the entry.
As you have to show what you have paid through bank which is not changeable

My iPhone 5 screen is black and will not come back on. The phone still works when paired with my vehicles Bluetooth what's wrong with it, and can I fix it?

My iPhone 5 screen is black and will not come back on. The phone still works when paired with my vehicles Bluetooth what's wrong with it, and can I fix it?

I have a similar problem. I restored my iPhone 5 to the latest available OS. After completing the process the phone never restarted. The phone was fully charged when I restored it but now refuses to charge past the red battery icon. I have been able to get the phone in UFD mode several times and have been able to load the new OS on the phone. The Apple logo does come on and the software fully loads. iTunes tells me the phone will restart but never does. I left it to charge all night but it never appeared to load the battery. This morning I went to the Grand Central Terminal apple store for help. A woman at the store plugged the phone in but it never charged. She absolutely refused to believe that I got my phone in UFD mode and loaded any software on. I don't think it is a battery issue. The only solution I was given was to buy a new phone. Repairing it was out of the question. At this point the phone is completely useless. Thanks in advance for the help.

Is it true that music pauses when a phone call comes in even when the ios6 'do not disturb' feature is activated?

is it true that music pauses when a phone call comes in even when the 'do not disturb' feature is activated?
thanks in advance

You could test it out and let us know!
Best of luck.

HT4623 My iPad will not come on. When I updated it, I did not plug it into the outlet. What do I need to do?

My iPad will not come on. When I updated the settings, I did not plug it into the outlet. What do I need to do to get it to come on?

First try a Reset ( No Data will be Lost )
Press and hold the Sleep/Wake button and the Home button at the same time for at least Ten seconds... (But can take Longer)... until the Apple logo appears. Release the Buttons
If no joy... Try a Restore...
1: Connect the device to Your computer and open iTunes.
2: If the device appears in iTunes, select and click Restore on the Summary pane.
Restoring > http://support.apple.com/kb/HT1414
3: If the device doesn't appear in iTunes, try using the Steps in this article to force the device into Recovery Mode.
Make sure you have the Latest Version of iTunes (v11.1.5) Installed on your computer
iTunes free download from www.itunes.com/download

How to trigger a workflow for DESADV when the IDOC reaches status 51

Hi,
A notification to the a user should be sent when DESADV goes to a error status 51.
I'm in SAP6.0 :
Basic type: DELVRY05
Message type: DESADV
Idoc: IDOCDESADV
Event: inputErrorOccurred
Task to be linked for the event : TS00008178
In SWETYPV the event is active, still this event is not getting triggered when the Idoc goes to 51 status.
What am I missing? Is there any configurations that I'm missing?
Can anyone please help me to fix this?
Thank you,
Renu

Hi Renu
There is two way to find the task and workflow....
In pftc tcode, you can check the task and where it is used by giving the task type as standard and task as 00008178.Display the task,then check where it is used.
Another way is:
1.Goto swdm tcode.
2.Select the Object tab.
3.Choose catagory as BOR object type and give the Object type as IDOCDESADV.
4.Then it'll display the task which is refering the method of the IDOCDESADV object.
5.Click on that task.It'll come to right window.Now select the where used icon...
6.If there is any workflow,then It'll display the workflow template number,name,step, and client.
Regards,
Hemalatha

Sales BOM Header Material should not come in J1IJ or delivery

Hi,
We have one depot plant, Now i am using the sales BOM, I have created one Material header with item category LUFM pricing at item level only, BOM is created, When I am entering the Header material in SO then alll child items are coming, then while creating the delivery all the child items and also the header items is coming in the delivery but same is coming in the J1IJ also I want that the header materal should not come in the J1IJ and it will be better if it is not in delivery if i set the indicator delivery block for header materia in SO then that item si not coming in Delivery but SO is shoing in Open SO as the header material is not delivered.
So is there any setting for this.
Also in quotaion I have maintain the item category assignment I have assign QT - LUFM - AGN
but whhen I am entering the header material in VA21 Ffor which the item category is LUFM system is giving the error message
No item category available (Table T184 QT LUMF )
regards,
zafar
Edited by: zafar karnalkar on Nov 24, 2011 7:56 AM

Hi,
Yes I want that the Header material should not come in J1IJ only. but i check the program of J1IJ it is selecting all the materials ref. to delivery number without any further check. also is it possible insted of SO if first we create the quotation in quotation therr willl be header material as well as child item but in SO only child item should get copy when creating ref. to that quotaion, I try with item category copy control, but then system is selecting non of the materils from Quotaion to SO, and when I allowed coopy control of header material from Quotaion to SO then it is copying Header as well as child items in the SO.
regards,
zafar
Edited by: zafar karnalkar on Nov 24, 2011 10:53 AM

Text visibility only in Print Preview Mode & Should not come in Hard copy !

Hi All,
Is it possible to have a text which is visible only in Preview but should not come in Printed hard copy ?
Regards
Ajay

Hello,
In the FM OPEN_FORM of your print program you will be passing whether it's print preview or not in the Options parameter
i.e.
CALL FUNCTION 'OPEN_FORM'
EXPORTING
FORM = 'Z_SAMPLE'
OPTIONS = itcpo
Just have an if statement in the SAPScript to only print this when that value = 'X' (i.e. IF &itcpo-tdpreview& eq 'X').
Regards,
Michael

This method should not be called anymore. The client was already released i

Hi,
while configuring Business Packager for Projects 50.3 fo, we made few changes in R/3 side as per the documentation. after that we are getting following error in portal
"This method should not be called anymore. The client was already released into the pool or the pool entry was deleted"
all the chages were reverted in R/3 system still we are getting the same error.
Can any one help on this issue....
Thanks in advance and for early responce higher marks would be awarded!!!..
Regards
Ravi Sankar Karri

Hi,
Well there were errors in how stop works:
"Stopping a thread with Thread.stop causes it to
unlock all of the monitors that it has locked (as a
natural consequence of the unchecked ThreadDeath
exception propagating up the stack). If any of the
objects previously protected by these monitors were in
an inconsistent state, the damaged objects become
visible to other threads, potentially resulting in
arbitrary behavior. "
I do understand that you want to have something like
killTheTreadIDontCareAboutConcequences-method, but
it's better to let all your methods that you want to
be able to terminate take a timeout argument, and deal
with the termination in the method. (Close the
sockets/streams etc that you are blocking on).
/KajThe point is, it is not always possible to make those blocking methods stop, via some magic "timeout" thingamabob. The bottom line is still that the blocking methods were written incorrectly to begin with (to possibly block indefinitely), so one cannot come up with an across-the-board solution, other than getting the root cause fixed in the first place. However, one is not always in control of fixing the root cause.

[svn] 2692: Bug: BLZ-227 - When using JMS Destination, MessageClient and FlexClient not released from memory when the session times out .

Revision: 2692
Author: [email protected]
Date: 2008-07-31 13:05:35 -0700 (Thu, 31 Jul 2008)
Log Message:
Bug: BLZ-227 - When using JMS Destination, MessageClient and FlexClient not released from memory when the session times out.
QA: Yes
Doc: No
Checkintests: Pass
Details: Fixed a memory leak with JMS adapter. Also a minor tweak to QA build file to not to start the server if the server is already running.
Ticket Links:
http://bugs.adobe.com/jira/browse/BLZ-227
Modified Paths:
blazeds/branches/3.0.x/modules/core/src/java/flex/messaging/services/messaging/adapters/J MSAdapter.java
blazeds/branches/3.0.x/qa/build.xml

Revision: 2692
Author: [email protected]
Date: 2008-07-31 13:05:35 -0700 (Thu, 31 Jul 2008)
Log Message:
Bug: BLZ-227 - When using JMS Destination, MessageClient and FlexClient not released from memory when the session times out.
QA: Yes
Doc: No
Checkintests: Pass
Details: Fixed a memory leak with JMS adapter. Also a minor tweak to QA build file to not to start the server if the server is already running.
Ticket Links:
http://bugs.adobe.com/jira/browse/BLZ-227
Modified Paths:
blazeds/branches/3.0.x/modules/core/src/java/flex/messaging/services/messaging/adapters/J MSAdapter.java
blazeds/branches/3.0.x/qa/build.xml

System should not creates new version when value of PO increased..

Hi Experts,
Need your help to solve this problem. When i increase value of PO it should retrigger Release strategy but it creates version first, then i have to tick completion indicator and check then only release strategy retriggers..
It should not create new version when change po
Please check below screenshot
Please help

Hi
Please reveiw the following points in note
   - 493900 FAQ: Release Strategy
      4. Why is the release strategy not determined?
     "If you use version management, the determination of the release
      strategy starts when the version is completed.
      You complete a version by setting the "version completed"
      indicator in the version tab."
   - 662993 Resetting an already occurred release
     You edit a purchasing document with release strategy.
     You change the quantity or the price. In spite of that, the
     already set release is not reset.
The release strategy works the same with or without version management
active - the only difference in case - version management is active -
is that if release is to be reset, it will be reset only on version
I hope this helsp to clarify this issue
Kind regards,
Lorraine

There are times when I try to start firefox 3.6 that it does not come up,but when I click it again, I get fire fox is running but not responing, close fire fox, or shut down computer. There are other times that it starts up normaly wit no probs

# Question
there are times when I try to start firefox 3.6 that it does not come up,but when I click it again, I get fire fox is running but not responding, close fire fox, or shut down computer. There are other times that it starts up normally wit no probs
..

Not using any mouse pad, I have a very smooth desktop. But I just tried to use a sheet of A4 printing paper, but no result, the problem persisted.
Someone on this forum suggested, that USB3 may interfere with the magic mouse.
I have 2 LaCie HDD's about 70 cm away from the mouse, I use them on Thunderbolt. But in operation or not - the result is the same, the mouse plays up! Just now I was clicking the desktop and the mouse created a new folder!!
Thanks for the advice, Bee
Cheers, Gerd

[svn] 1931: the ja_JP swc' s should not have been removed from the locales package, I' m adding them back in

Revision: 1931
Author: [email protected]
Date: 2008-06-03 13:30:46 -0700 (Tue, 03 Jun 2008)
Log Message:
the ja_JP swc's should not have been removed from the locales package, I'm adding them back in
Modified Paths:
flex/sdk/trunk/build.xml

Hi Manny1/mreider,
First, I’m sorry to hear that you two may be having issues utilizing a recently purchased Gamers Club Unlocked (GCU) Gifting Card.
In all reality, our stores don’t even need to exchange the Gifting Card for the standard GCU card, although that option should be available to you if absolutely needed. The GCU Gifting Card can be applied to your My Best Buy membership by simply following the directions on the back of the card.
Thanks for sharing your feedback and I hope for a much better experience when you return to your local Best Buy to get this taken care of! If needed, please don't hesitate to ask for a manager or supervisor.
Brian|Senior Social Media Specialist | Best Buy® Corporate
Private Message

My macbook air did not come with any of the ilife apps? why is this

I bought a Macbook air, but it did not come with any of the ilife apps? why is this

Launch App store from the Dock.
Sign in with your Apple ID and password.
Click the "Purchase" tab at the top.
You should see a line saying "You have 3 Apps to Accept".
Click the "Accept" button on the right.
A new Mac comes with 90 days of free tech support from AppleCare.
AppleCare: 1-800-275-2273
You can call AppleCare.
Best.

Macbook Pro 2011 DVI HDMI out does not work with TV when the power cable is connected

My Macbook Pro (Early 2011) DVI HDMI out does not work with TV when the power cable is connected. If get the blue screen and then can use the macbook but nothing is displayed on the TV. If i go into display I can see that there are two screens but nothing displayed on the TV. If i take the power cable out at this point the TV shows the second desktop as expected. If i then reconnect the cable, the screen flickers, as though it is being affected by the power cable, and the screen goes blank on the TV. Only if i remove the DVI cable do i get the blue screen again. If i remove the power cable and reconnect it will do it every single time, so i cannot see it being a TV issue or a minor glitch.
I have had this working previously but at the minute it seems to not be playing ball....any thoughts
Thanks
Dan

BUMP
Any ideas?

Should not come to AE when the IDOC segment missed

Similar Messages

Maybe you are looking for