Should "Reload for Each Call" unload after one call?

The subject line says it all, plus I asked the question here: http://forums.ni.com/ni/board/message?board.id=170&thread.id=190669
I would like to use "Call Setup..." -> "Reload for Each Call" as an convenient way to optimize memory in my big application; however, LV isn't letting go of the dynamically called VIs. Try running the attached examples with Profiler running and you'll see that only the only way to get the desired result is with "test LV7 dynamic call.vi".
Is there a way to coax the easy "Call Setup..." method into working?
Thanks
Attachments:
wish this would work.zip ‏35 KB

Travis,
I ran all 3 of your VI's with the dynamic call to your 4th, but I added a for loop to them, so I could read data a little more easily form the profiler. I will attach a screenshot to see if you got similar results, but I changed the loop interations, and the memory was exactly the sam, only VI time changed.
test LV7 dynamic call: 31.49kB
test reload for each call: 31.30kB
test load with callers : 29.46kB
So, as you can see, the reload for each call DOES use less memory than the LV7 dynamic call, but load with callers uses even less.
I hope this helps you some.
Chris Van Horn
Applications Engineer
Attachments:
Profile Performance.JPG ‏57 KB

Similar Messages

Iphone 4s sound gets blank for 3-5 secs after one minute we call

I have iphone 4s and in a call the sound gets blank for 3-5 secs after one minute we call , this happens every time and is not dependant on the carrier.
its very irritating

S2KRo ....
I just got off the phone with Apple and I think you are right about the "selling for the Iphone 5". She told me she could get me someone that can fix it but I first had to pay $120 to be transfered. She also said that it's not the system update because they have had a LOW volume of calls for this issue.
I hung up with her and I'm gonna call back in a bit and see if I can get to the bottom of it.

TS1559 I did all 5 steps and they didn't work. I went into apple and they said it was probably unfixable and i would just have to pay to have it replaced. ridiculous, i'm paying for your broken product after ONE YEAR of use??

I did all 5 steps and they didn't work so I went into apple and they basically told me they could send it away but it was probably unfixable and i'd have to pay for to replace it (180 dollars). I've only had th iphone 4s for two weeks over a year, am I seriously expected to pay for their broken product after one year of use??

kmombo wrote:
I've only had th iphone 4s for two weeks over a year, am I seriously expected to pay for their broken product after one year of use??
Yes, that was the terms of the warranty that you accepted when you purchased the phone. You had the option to purchase an extended warranty that would have covered it for 2 years, but you chose not to.

For each row of a table call a pl/sql function

Hi,
i have a search form in adf like this:
parameter1:___
parameter2:____
buttonSearch
Table with results
field1 field2 field3
row1 ------ --------- -------
row2 ------ --------- -------
row3 ------ --------- -------
The user inputs the parameters 1 and 2 then press buttonSearch and the query execute and returns rows 1 to 3.
What i need is for each row call pl/sql function and passed the parameter 1 and 2 and field 1 to 3 (plsql function recives 5 parameters (parameter1, parameter2, field1 , field2 and field3) )
my buttonSearch call a java class that execute ExecuteWithParamters method.
I create the call to my plsql function on Application module class and then export as a java interface.
So i have the function to use in the viewcontroller layer, but i don't know where to use it, and how to pass the paramters: the parameter 1 and 2 that user inputs and the row fields.....
any ideas....
thanks!!

Hi,
for this you need to call the PLSQL function upon table rendering, which means that you need a field in the table referencing a managed bean. In the managed bean you can use #{row} and resolve it using a ValueExpression. #{row} gives you access to the current rendered row (this is why you need to do it when the table renders) and thus allows you to call getAttribute(name) to get the values of field 1 - 3. The search field value you should get through the bindings reference (assuming the search form uses ADF). Then you create an operation binding for the executeWithParameters and call operationBindingName.getParamsMap().put(argname, argvalue); on it.
Frank
Ps.: I am concerned about the performance you get and wonder if it isn't possible to create a transient attribute that executes the function and displays the results. As I understand, the search parameters are only to filter the result set, which you still can do

What are the advantages of utilizing a dynamic VI compared to utilizing the VI Call Configuration Dialog Box Reload for each call option?

Is it more efficient to use a dynamic VI or utilize the VI Call Configuration Dialog Box which apparently can perform the same function? I realize that there are restrictions on using the VI Call Configuration Dialog Box, however, if my scenario doesn't concern the restrictions, why would I want to go thru the trouble of creating a dynamic VI when I could simply click on the VI of interest and configure from a menu? Are there performance advantages? Thanks in advance!

Generally, I wouldn't recommend playing with the call setup dialog at all (for those who don't know it, you can get to it by right clicking a subVI in the BD). By default, VIs are configured to load with callers and that's the correct options for almost all static VIs. The Open VI Reference primitive has multiple advantages:
It allows you to select different VIs dynamically.
It allows you to spawn multiple copies of reentrant VIs.
It allows you to perform asynch runs (although I think that this is something that should actually be available through the call setup dialog).
It allows you to open references to VIs in other application instances.
In the rare cases where you do want the same functionality that the call setup dialog gives you, it doesn't hide it.
Try to take over the world!

Default to Call Log after Phone Call is Ended?

I just got the BB Curve 8330. I had the BB 8703e. I have noticed some new behavior with the BB Curve software When I make a call, and then end the call, the call log automatically comes up on the screen. I have to cancel out of this screen to get back to the home screen. Is this by design? I could not find anywhere to disable this behavior. Please advise and thanks in advance.

That is the way it works. When you end a call, if you want to do directly back to the Homescreen, press the red end call key twice.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

SPA IP phones doesn't show calling number after the call was picked UP

Hello,
Our different CISCO SPA IP phones models (at this time we are using 7.4.8a version) are working with Broadsoft AS. And now we have a problem: when CISCO SPA IP PHONE pickups the call ( by pressing BLF lamp) and the call is connected, Cisco user doesn't see any information (calling name or calling number) with whom he is talking now. He on only sees on screen pickup extension *11 and info that the call is connected. From SIP traces I can see this information in PAI header in SIP 200 OK message (when pickup was initiated).
I also tried to change Caller ID Header - no luck. I've upgraded IP phone to latest version (7.5.1a) - didn't help.
I've experience with THOMSON and MGC. By pressing BLF , Thomson displays info who (calling number) is calling to your configured BLF line and gives you actions: retrieve this call or cancel - you can choose if you still want pickup this call.
So can you give me some hints how to fix this issue? Our at this time CISCO IP PHONE doesn't have such feature?
Thanks in advance,
Giedrius

Why not answer?
bug is available from firmware 7-4-7 and above and are still
on models SPA50x and SPA525

Multiple web service calls - Split message,1 WS call for each message

Friends,
We have designed a BPM which will pick the files, make web service call and merge these message structures and map them to the target.
We have to modify this design as follows,
We have to split the message based on purchase order number, meaning one message for each order number and then we need to make a web service call for each of them,after we get all the responses we will merge the files using transformation. (merging files and transformation is already taken care, its the web service part which iam looking for)
Thanks in advance for all your help/ideas.

Friends,
Can you please help me out with this logic? Thanks!

One connection for each sql statment?

Hi there!
Can I use only one connection for several stataments or prepared statements? or
Do I have to use 1 connection for each statement?
After an insert, how can I know row id assigned by SQL Server (authonumeric)?
Thanks a lot in advanced.
LJ

>
One of the updates to the JDBC API in Java 1.4 has
been a getGeneratedKeys() call, which (if you
requested them) gives you the keys that were
generated.
Good idea here, evnafets. I tried it with Oracle recently, but it didn't work. I wasn't aware of a driver that did implement it. I'll try MySQL to see. Thanks.
You would probably need an up to date JDBC driver, but
I have seen this work in mySQL. Maybe it might solve
this problem once and for all.
Apart from that you can try select @@Identity from the
server to get the id
Or that old awful, unreliable hack of select (max)
(shudder)
Any other suggestions?Some folks like having a single table for key generation. Keys are unique across all tables that way. Using that scheme with before insert triggers can mean just a query on the key table. - MOD

How to use For-Each Structure with Multiple node XML structure

Hi,
How to use for-each (BPEL 2.0) construct for Multinode XML structure.
Here is the easy case: I have list of suppliers specified by supplier
<supplierList>
<supplier>1</supplier>
<supplier>2</supplier>
<supplier>3</supplier>
</supplierList>
Now there is a web service http://hostname/getsupplierdetails/wsdl which accepts one supplier at a time.
like
<supplier>1</supplier>
reponse object is
<message> notfound/found </message>
But how can I use for each of XML node to call this service and collect the result like
<supplierList1>
     <Suppinfo>
        <supplier>1</supplier>
        <message> not found</message>
</suppinfo>
    <suppinfo>
        <supplier>1</supplier>
        <message> not found</message>
</suppinfo>
</supplierlist1>
Thanks

For looping you use foreach loop and , loop for the number of occurences and when constructing response, adding a new element you have to use bpelx:append. Good sample at Enterprise Integration: Oracle SOA Suite 11g: Populating a list or an array in BPEL without using XSLT.

Different chart for each level hierarchy in report designer

Is there a way to display a different chart for each level of the hierarchy in a report designer? I want a different chart for each level. That is, if there are 5 nodes in level 4, I want 5 different nodes. Is there a way to do this? I tried to insert the chart inside a cell in each level, but it shows the same chart for all nodes instead of a different chart for each node.

Has any one tried using a context sensitive chart? According to this, it seems like this should be possible, but I am having no luck.
http://help.sap.com/saphelp_nw70/helpdata/en/47/a99a0a5fdb0985e10000000a42189c/frameset.htm

For each atom

Hi experts,
I would like to do a SQL querry in an atom SQL call inside a for each atom like that :
My for each atom get back each result of my first sqlCall and my query in my second sqlCall compare an element with the current element of the for each atom like that : Select element from table where element1=current element of for each atom (which is one of results of first sql call)
I don't know how to get back the current element in my query
Does anyone know?
Thank you
Regards
Sarah

Hi
Did you replace atom1 by atom4 here?
Then in the expression in the foreach atom use the Xpat like this:
/vpf:Msg/vpf:Body/vpf:Payload[./@Role='X' and ./@id='atom1']/Items/Item
If true then try this:
/vpf:Msg/vpf:Body/vpf:Payload[./@Role='X' and ./@id='atom4']/*[local-name()='Items']/Item
Regards

Stopping songs from automatically stopping after one play

Hey guys,
After doubleclicking a song on the playlist, the song plays but then instead of playing another song stops showing the apple logo. This happens no matter if the songs are played in libary, playlists or party shuffle or if songs are highlighted. How can we rectify this so each song plays after one another?
Thanks
P.S. I'm Using Itunes V4.7 for Windows
Dell Inspiron I6400 Windows XP

hmmmm. are all the little checkboxes to the left of your tracknames unchecked? (that can produce the symptoms you're reporting.)
to check all (or uncheck all) your songs, hold down Ctrl and click on one of the boxes.

Do I have to purchase OSX Mountain Lion for each computer

I have Apple desktop and laptop that I want to upgrade to OS X Mountain Lion. Do I have to purchase the software twice and download it twice for each computer?

No. One purchase multiple installs. Just have 10.6.8 or Lion installed on each computer. Once you purchase and download you can redownload with the other computer by logging it into the App Store with the same Apple ID. Or you can do this to save the download time:
Make Your Own Mountain/Lion Installer
1. After downloading Mountain/Lion you must first save the Install Mac OS X Mountain/
    Lion application. After Mountain/Lion downloads DO NOT click on the Install button.
    Go to your Applications folder and make a copy of the Mountain/Lion installer. Move
    the copy into your Downloads folder. Now you can click on the Install button. You
    must do this because the installer deletes itself automatically when it finishes
    installing.
2. Get a USB flash drive that is at least 8 GBs. Prep this flash drive as follows:
a. Open Disk Utility in your Utilities folder.
b. After DU loads select your flash drive (this is the entry with the mfgr.'s ID and size) from the left
      side list. Click on the Partition tab in the DU main window.
c. Under the Volume Scheme heading set the number of partitions from the drop down menu to one.
      Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the
      partition scheme to GUID then click on the OK button. Click on the Partition button and wait until
      the process has completed.
d. Select the volume you just created (this is the sub-entry under the drive entry) from the left side
      list. Click on the Erase tab in the DU main window.
e. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the
      button for Zero Data and click on OK to return to the Erase window.
f. Click on the Erase button. The format process can take up to an hour depending upon the flash
     drive size.
3. Locate the saved Mountain/Lion installer in your Downloads folder. CTRL- or RIGHT-click on the installer and select Show Package Contents from the contextual menu. Double-click on the Contents folder to open it. Double-click on the SharedSupport folder. In this folder you will see a disc image named InstallESD.dmg.
4. Plug in your freshly prepared USB flash drive. You are going to clone the content of the InstallESD.dmg disc image to the flash drive as follows:
a. Double-click on the InstallESD.dmg file to mount it on your Desktop.
b. Open Disk Utility.
c. Select the USB flash drive from the left side list.
d. Click on the Restore tab in the DU main window.
e. Select the USB flash drive volume from the left side list and drag it to the Destination entry field.
f. Drag the mounted disc icon from the Desktop into the Source entry field.
g. Double-check you got it right, then click on the Restore button.
When the clone is completed you have a fully bootable installer that you can use without having to re-download Mountain/Lion.
Note: The term Mountain/Lion used above means Lion or Mountain Lion.
As an alternative to the above (you still have to do your own download of Lion/Mountain Lion) you can try using Lion DiskMaker 2.0 that automates the process of Steps 2 through 4.

Can you have two nicknames for game center for two kids linked to one Apple ID?

Can you have two nicknames in game center (for each child) linked to one email/apple ID?

On each of the phones you're gonna use a new Apple ID for iCloud: turn off Contacts, Calendars, etc. for iCloud. You'll be prompted to keep the data or delete it from the phone, then turn off iMessage, FaceTime & delete the iCloud account...Settings>iCloud...scroll down...delete account. Then, setup iCloud using the new Apple ID, turn on iMessage & Facetime.
This will have no affect on the ID you share for iTunes content, & you can continue to do so.

Should "Reload for Each Call" unload after one call?

Similar Messages

Maybe you are looking for