Should the BI trigger set the PK for me on data upload in apex?

This should be simple but not sure what to do about the PK field, ID.
I'm trying to upload some rows to the table where txtname and dteEffectiveDate are the only 2 not null columns; I have ensured the upload data are complete, no nulls. However, the error is due to the PK column, ID.
There are NOT NULL columns in FAC_DEV.FAC_VENDORS. Select to upload the data without an error.
I have a valid BI trigger on the table. Shouldn't the BI trigger automatically set the ID field for me? Or should I check the next sequence number and just add those PKs to the spreadsheet?
thanks

ok well I checked the sequence, grabbed the next number, and added ID field to spreadsheet, and imported it just fine. Sequence got updated. Interesting.

Similar Messages

  • Extract the userID that set a role for a specific user

    Hi all @SAP Forums,
    I'm going to write a simple report to extract some information about users and role assignments in the system I'm working on.
    The requirements is quite simple; for every user in the USR02 table, I have to extract some info about the roles the user has.
    In order to do so, it's quite straightforward to find roles for a particular user looking into the AGR_USERS table, but ... I'd like to know if there's a way to find the user who set the role assignment for that specific user; the problem is that I cannot find that information in any AGR* tables, so I start to think it's not a stored information I can retrieve in any way.
    Any hints/suggests you can give me? Thanks in advance.

    Hello muthu,
    useful link to refer to when I'll need to extract a full username (first and surname) for a userId. But the question, forgive me if I've been not-so clear, was different.
    A (key) user, say A123456, sets a role for another user (A00000) in SRM... let's suppose now A00000 becomes a buyer. I'd like to know if there's a way, starting from the user A00000, to understand WHO had given him his role (in this case, A123456) and WHEN... I can see the CHANGE_DAT field in AGR_USERS about the "when"... where can I (if I can, obviously) find WHO set the role for A00000 ?
    Thanks again, sorry if I've been not that clear in explaining

  • How to burn a video produced in iMovie in iDVD: with gratitude for the advice received I used the "professional quality" setting in iDVD for a video which in iMovie is 1h 20min long.  however this also failled. where did I go wrong, please?

    how to burn a video produced in iMovie in iDVD: with gratitude for the advice received I used the "professional quality" setting in iDVD for a video which in iMovie is 1h 20min long.  however this also failled. where did I go wrong, please?
    the message sked me to alter the quality of the DVD as the content was too large for the quality sellected.
    PLEASE HELP again,
    THANK YOU VERY MUCH
    MIchael

    Check the Advanced ➙ Project Information menu option to make sure the playing time of the entire project, movie plus menu is below the 120 minute limit.
    OT

  • What is the TV signal setting in photos for?

    What is the TV signal setting in photos for?

    http://store.apple.com/us/product/MC748ZM/A?fnode=5b3abcc454654c56a0e1d775d3d637 6d3cdc0efb627d77fa1dd6745f93866fc31211214e33139bb80e1e43a438fd72ae275bef092dad35 2f4dc5bddea1935be0&fs=m.ipodCompatibility%3Dipodnano

  • Singleton class for logging in the application, and setting the flag

    Hi Friends,
    I have a singleton class for logging in the application, and setting the flag once logged. can some one help me in doing this.
    with regards,

    rtfm, for example here - http://www.javacamp.org/designPattern/

  • HT201365 the activation screen(set up screen) for ios 5 and 6 kinda looks better than ios 7 and 8

    the activation screen(set up screen) for ios 5 and 6 kinda looks better than ios 7 and 8

    So what? Do you want a prize for posting such an illuminating comment?

  • What is the minimum trigger hold off time for the 5124

    What is the minimum trigger hold off time for the 5124 i.e. what is the fastest i can collect data without streaming?
    Mark Mutton
    Electrical Engineer

    Good morning Mark,
    Thanks for contacting National Instruments with your issue, we'll try our best to resolve it for you as quickly and efficiently as possible.
    The minimum trigger hold-off time for the NI PXI/PCI-5124 is 2 us with TDC disabled and 10 us with TDC enabled.
    You can take a look at any other trigger specifications for the NI PXI/PCI-5124 below:
    http://digital.ni.com/manuals.nsf/websearch/35D2892B4AC32E5A8625704A00590CFD
    Best of luck with your project.
    Sincerely,
    Minh Tran
    Applications Engineering
    National Instruments

  • What is the procedure to set the NLS_DATE_FORMAt in the database?

    what is the procedure to set the NLS_DATE_FORMAt in the database?

    Although why rely on the NLS_DATE_FORMAT anyway? Any date formats for display purposes should be tailored into the code of the application wherever you use TO_CHAR or the application has a "date" field that allows formats to be specified (depends on the GUI).

  • Why can't I just right click on the thumbnails and set the websites I want?

    I love the thumbnail idea, but why can't I just right click on the thumbnails and set the websites I want?
    Why do i have to wait for a recent one to come up?
    Of the 9 available, I would like to set 6 to website i can input by right clicking it and leave the rest for the recently visited.
    I ho[e you include that feature in your next update.
    Thank you
    P.S. 2 more issues
    1. Firefox is the only browser that always give me trouble attaching files in gmail. I still use firefox for all browsing but for mail attachments, I use others. And yes, I have done the "Clear cookies, reset, reinstall, clear cache, etc etc etc... none worked for more than a few days. no such problem with other browsers.
    2. Your new updated search bar (Top right hand corner) is nice but can be very irritating for the following reason:
    I like to highlight - copy (a word or phrase) - and paste it in the search bar. was fine with the older version, but now as soon as I right click to past, the menu pops up for me to select a search engine. Very irritating since I have yet to paste the copied word or phrase. I rather paste it and then have the option to click on the drop down menu. If you see this as not something masses would want, please place an option in setting for us to stop the suggestion for search engines coming up automatically when we try to right click in the side search bar to paste.

    You can change the order of the boxes on the about:newtab page and drag an item to a different tile to pin it to that position or you can remove a website by clicking the close X to block that URL.
    You can drag a bookmark or history item and drop them in a tile on the about:newtab page to pin them and have your own favorites sites showing.
    Changes made manually on the about:newtab page are stored in prefs that you can find on the about:config page.
    *browser.newtabpage.pinned stores websites that you have pinned to a tile.
    *browser.newtabpage.blocked stores websites that you have removed by clicking the X button in a tile.
    So you can reset those prefs via the right-click context menu to reset changes made to the about:newtab page.
    *http://kb.mozillazine.org/about:config

  • Error during PO Change-"Enter the price or set the 'Invoice Expected' indic

    Hi Gurus,
    I am facing this issue in the PO change. Whenever I try to change a PO and check ; system says" No error" but when I order it then I get this error "Enter the price or set the 'Invoice Expected' indicator " with a pop up "Complete Purchase order xxxx first or 'hold' the changes
    This happens for all the POs with any vendor.
    Regards
    Kapil

    Hi Kapil,
    We have got similar issue before while changing the P.O in change mode.
    This generally happens when the P.O is changed after the follow on documents has been created.
    In this case you can delete the change version and then amend the P.O without any issue.
    Generally the 'Delete' button gets disabled once the follow on documents get created but in this case the 'Delete' button would be active and clicking on 'Delete' button would delete only Chnage version and the P.O would be back to original ordered status.
    Please do the changes and let me know in case of any further clarifications.
    Regards,
    Teja

  • Can anyone tell me how to remove the owner when setting the location

    Hello,
    Can anyone tell me how to remove the owner when setting the location?
    Properties
       Table Name:  (Table Name)
       Table Type:   Tables
       Owner:           Public
       Overridden Qualified Table Name:  (Table Name - same as above)
    Any help would be appreciated.
    Thanks
    Ann

    Hi Ann,
    please check this document to determine the correct space for your question:
    Find Topic Spaces on SCN (Forums)
    If you need help moving it, let me know!
    Thanks,
    Kristen

  • Having trouble getting Skype to work.  It did when I first got the computer about a yr ago but then quit.  I've trashed and reinstalled the program and set the preferences to allow Skype but nothing is working.  Any suggestions?

    Having trouble getting Skype to work.  It did when I first got the computer about a yr ago but then quit.  I've trashed and reinstalled the program and set the preferences to allow Skype but nothing is working.  Any suggestions?

    all I can suggest is completley unistall as here
    https://support.skype.com/en/faq/FA12073/how-can-i-completely-uninstall-and-then -reinstall-skype-for-mac-os-x
    Then reinstall
    http://www.skype.com/en/download-skype/skype-for-mac/

  • Why don't the options to not check if Firefox is the default browser, set the homepage to a blank page, and password settings hold?

    Why don't the options to not check if Firefox is the default browser, set the homepage to a blank page, and password settings hold? It opens to a firefox page and asks if I want to make firefox the default and has the checkbox checked to check for default with every launching.
    Just updated to Firefox ESR 24.6.0

    This article lists a number of possible reasons that Firefox might be unable to save your preference changes during your session, or that they might be overridden at startup: [[How to fix preferences that won't save]].
    Another common issue is a feature of security or utility software that protects you from unwanted browser settings changes by reverting them back to an earlier state. For example, Advanced SystemCare's Surfing Protection feature can do this. You may need to turn off such features, if you have them, in order to keep your changes.

  • Does the FM ALE_GOODSMVT_CREATE set the delivery completed indicator automa

    Hi Gurus,
    Does the FM ALE_GOODSMVT_CREATE set the delivery completed indicator automatically according to the customising done in MM>Goods Receipt>Del indicator set?
    Helpful answers will be rewarded
    Ramesh

    Hi,
    If you recieve the total qty against that PO, it will flag automatically.
    Regards
    Rahim

  • HI,How can i set delta option for costumised Generic data source

    Hi Sir/Madam,
          How can i set delta option for costumised Generic data source.
    Regards,
    Vishali.R
    Please search the forum before posting a thread
    Edited by: Pravender on Aug 15, 2011 1:26 PM

    Hi,
    Go to RSO2 transaction and click on change then on the tool bar click on Generic Delta button. In the next popup you can set your delta.
    Regards,
    Durgesh.

Maybe you are looking for

  • Need to place a variable value at the end of report heading in BI 7

    Dear All, We have to place a variable value at the end of the report heading and the value should get refreshed whenever we change the variable by using "Change Variable Value". I have created a macro and the value will get triggered unless and until

  • Scenario of Goods Recipt without P.O

    Hi Experts, My Client wants a automatic P.O to be created while doing the Goods Recipt with 101 Movement Type. The Scenario is as Follows. One of his Vendor has came to show the 20 sample Material But, Infact there is an requirement of these material

  • Why doesn't my Photoshop Elements 12 launch/open?

    No matter how I try to activate PSE12, through the desktop shortcut, through program files, through old photoshop works I've saved, it will not start. I've tried reinstalling it, but it still won't launch. What's strange to me is that Premier Element

  • JDBC Driver 8.1.6

    Dear all friends, I am usign JDeveloper 3 with Oracle 8.1.5 under windows NT .As you probably know JDBC driver 8.1.6 supports connection pool and I am looking for that driver .Could anyone please help that where can I find that driver or download it?

  • Benefits of using vendor partner function

    Hello Experts: I understand the general use of vendor partner function. But what are the benefits of using vendor partner function? Is it for ease of reporting? Is there a functionality down the line that will not be possible if a vendor partner func