Should TouchPad be left on all the time? Battery life?

Hello, sorry if this question has been asked before but I have searched this forum (before asking this question) and could not find an answer. Is it recommended to leave your TouchPad on all the time (which I have been doing) or should it be turned off like I do with my PC every night?
Also, what is the typical battery life of the TouchPad and once the battery fails can we replace the battery or is that the end of life for our TouchPad too?
Thank you in advance for any help you can provide me in answering my questions.
Post relates to: HP TouchPad (WiFi)

There is no harm leaving the device "on", but I'm assuming you mean letting the screen go blank when not being used.
Since the device is still relatively new, I'm not sure how long the battery will last.  I still have Palm PDA's that work like new after 7 years.  I treat them like a pet - feed them each night, and use a cover to keep them safe.
The batteries in the old devices weren't user-servicable, but many users and websites were able to change them out.
WyreNut
I am a Volunteer here, not employed by HP.
You too can become an HP Expert! Details HERE!
If my post has helped you, click the Kudos Thumbs up!
If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

Similar Messages

  • Should the TC be left on all the time?

    Ok - this may be a daft question - but should the TC be left on all the time or is it ok to switch it off at the mains each time I shut down my iMac?

    I've tried leaving my TC on all the time but it seems to be constantly active (the green light flickers) even when there are no computers attached to it. I happened to come downstairs this morning at around 3am and the TC was still humnming away to itself seemingly unaware that nothing was connected to it! I unplugged it. In addition to getting rid of the annoying noise it will save some electricity!!

  • Should DSL modem be left on all the time?

    For the last week, I have been having serious intermittant DSL connectivity problems. Nothing has changed in my house, we do not have wireless, no other comm devices, etc. I have opened a trouble ticket with Verizon.com because of static on the phone lines - perhaps that is the problem.
    However this morning, I called the DSL tech support line (800-567-6789) and described the problem. That individual told me the following:
    -- I should leave DSL modem (Westell 6100G) on all the time in order for the modem to maintain sync with the central office.
          ==> IS THIS CORRECT? 
                  If this is correct, would someone please explain the technical reason for this?
    -- The tech support person is sending new DSL filters just in case. When I tried to use the automated Verizon phone system, the system keep thinking I was inputting wrong answers to questions. I turned off the modem and this problem disappeared. Wierd!!!
    -- The tech support person is conducting a 24 hour test to see if line problems are discovered.
    Thoughts anyone?
    Thank you all - this is a great forum!!!
    Solved!
    Go to Solution.

    David_3 wrote:
    For the last week, I have been having serious intermittant DSL connectivity problems. Nothing has changed in my house, we do not have wireless, no other comm devices, etc. I have opened a trouble ticket with Verizon.com because of static on the phone lines - perhaps that is the problem.
    However this morning, I called the DSL tech support line (800-567-6789) and described the problem. That individual told me the following:
    -- I should leave DSL modem (Westell 6100G) on all the time in order for the modem to maintain sync with the central office.
          ==> IS THIS CORRECT? 
                  If this is correct, would someone please explain the technical reason for this?
    -- The tech support person is sending new DSL filters just in case. When I tried to use the automated Verizon phone system, the system keep thinking I was inputting wrong answers to questions. I turned off the modem and this problem disappeared. Wierd!!!
    -- The tech support person is conducting a 24 hour test to see if line problems are discovered.
    Thoughts anyone?
    Thank you all - this is a great forum!!!
    DSL is very sensitive to noise quality issues, and if you are getting static, I would wager that they are directly connected.  If it's the splitters that are the problem (and yes that is possible) then removing them and your phones from the picture would yield a positive result.  but that would mean you would have to leave the phones and filters unplugged for x amount of time and depending on the frequency of the drops, that may be unrealistic.
    Phones and filters go bad, so it's possible to have had a working set of phones and filters, and never touched them and yet still have a problem in the future.
    The DSL modem should be connected at all times, as that is what DSL was designed to be.  an always on connection.
    In a perfect world I would say that you can disconnect and connect it at your leisure, but with all the little things that make DSL hiccup, its best to leave it plugged in 24/7.  you can unplug it, it won't hurt it, and it will save you a little bit of energy, but it won't do much for your performance other than extend the life of your router.
    and do not believe that they are running any legitimate proactive 24 hour test - they MIGHT grab some stats off the modem that show stuff, but a lot of it is information that a normal tech would not be able to decipher.
    My advise, either disconnect the phones and test that way like I described above, or wait for the filters.   
    leaving the modem plugged in is a personal decision, I personally would leave it plugged in 24/7 unless I was not protected properly on my PC and worried about attacks/virus's

  • Cursor behavior is very strange as one would hold left arrrow all the time?

    Hello,
    Sometimes ( we can't trace the trigger) we're experiencing wird behavior of the Thunderbird
    All of the sudden cursor in editor (text input areas) starts to run back, as one would hold left/back/ arrow.
    First thought was it is a virus, but apparently there is none.
    at that time In left folder menu: when selected folder tree starts to collapse to root (sub-folders can not be accessible)
    in drop-down menu: when selected, it starts to move to another drop-down continuously
    if we restart application, problem is still there, only if we restart the computer, we can use thunderbird again until next time problems appears.
    system:
    Win 7 home edition

    If your problem goes away in safe mode, the issue is
    * a user settings
    * Hardware Acceleration
    * one or more add-ons
    '''[https://support.mozilla.org/en-US/kb/troubleshoot-firefox-issues-using-safe-mode Start Firefox in Safe Mode]''' {web link}
    While you are in safe mode;
    Type '''about:preferences#advanced'''<Enter> in the address bar.
    Under '''Advanced,''' Select '''General.'''
    Look for and turn off '''Use Hardware Acceleration'''.
    Poke around safe web sites. Are there any problems?
    Type '''about:addons'''<enter> in the address bar to open your Add-ons Manager.
    Hot key; '''<Control>''(Mac:<Command>)''<Shift> A)'''
    In the Add-ons Manager, on the left, select '''Extensions.'''
    Disable a few add-ons, then '''Restart Firefox.'''
    Some added toolbar and anti-virus add-ons are known to cause
    Firefox issues. '''Disable All of them.'''
    If the problem continues, disable some more (restarting FF). Continue until
    the problem is gone. After, you know what group is causing the issue.
    Re-enable the last group '''ONE AT A TIME''' (restarting FF) until the problem returns.
    Once you think you found the problem, disable that and re-enable all the
    others, then restart again. Let us know who the suspect is detective

  • Does theAirPort Time Capsule have to be left on all the time

    Do I have to leave the NEW UPRIGHT  Time Capsule on and connected to the power all the time

    There are two different schools of thought as far as the Time Capsule (and other Apple routers as well)
    If Apple had wanted you to turn off the Time Capsule on a regular basis, they would have included an "Off" switch on the device, or a means to turn off the Time Capsule from your computer.
    Clearly, Apple designed the Time Capsule is designed to be left on most of the time.
    There is  less stress placed on an electronic device when it is left on, as opposed to turning it off and on constantly.
    Yet, it is true that turning the Time Capsule off will save a bit of energy.
    Knowing that just about any decision involves trade offs, you will have to decide which school that you want to join.

  • Airport Extreme loses USB printer unless printer left on all the time

    Running the 802.11n Extreme with firmware 7.1.1 and Airport Utility 5.2.1 (released 13 August 2007) with an Epson RX650 connected directly to the Extreme's USB port.
    It appears that the USB port on the Extreme only checks the status of a connected USB printer when the Extreme itself is restarted - if you ever turn your USB printer off (for example, at bedtime) and on again(e.g. the next morning) the Extreme does not re-check the USB port status.
    A bit odd, since the intention of USB is to be hot-pluggable...
    Any solutions better than restarting the Extreme every time you turn your printer on?

    I have this exact same issue,
    Airport Extreme just looses my printer all of the time, and leaves Tiger and Leopard in the 'Connecting.' or 'Opening Printer Connection..' stages 40% of the time.
    It's an extremely annoying bug, and you have to turn off / un-plug things in the exact order otherwise it just wont:
    a) recognise the printer over it's own USB port or
    b) Finder will never be able to connect to it, even when it can blatantly see it.
    My Printer is an Epson R1800

  • Should a macbook drive spin all the time?

    I just replaced my 120gb with a 750gb, and it never stops spinning. It seems to use a lot more battery life too, becsues of the constent spinning I assume.
    Its a samsung sata 5400rpm.

    I do have the preferences for the hard drive to stop after 10 minutes of not reading/writing. With the original drive that came with the macbook I could tell when it spun down. There was a definate stop in vibration, like if you closed the lid and it went to sleep. Now, the vibration continues even when I have not loaded any new doc, web page, email, etc for 10 + min. I know it is not the fan either. Thats kicks on sometimes with streaming video, etc.
    It has also been a couple of weeks since I set up the new drive, which should be plenty of time for spotlight to have indexed. I only have around 90gb on this 750gb drive.

  • Can imacs be left on all the time

    I was told that I should be leaving my imac on at all times, i wanted to check this out before doing so?

    The "Everything Mac" booklet that came with my iMac says on page 15 as follows:  "If you will be away from your iMac for less than a few days, put it to sleep".  That is the practice I follow.  The only exception I make is when the weather appears to be such that we'll have a power failure.  Then I shut my iMac down to do it in an orderly fashion.  In addition in "Systems Preferences > "Energy Saver", I have unchecked the box labeled "Start up automatically after a power failure" because I don't want to run the risk of a start up and shut down if the power is going on and off.
    If your iMac came with a similar booklet, check it out for all sorts of tips on using, troubleshooting, etc.

  • HT201365 before up dating my i phone 4s, i used to be ablr to double press the bottom button to bring up all the ones i wante to get rid of.which when left on all the time wastes my battery. now since i upgraded it i cant do that, how do i turn off all th

    before updating my i phone 4s , i used to be able to double press the bottom button to delete the unused icons on my phone to stop wasting the battery. since up dating double pressing the bottom doesnt work , so i dont know how to get rid of the unused i cons , can anyone help me.

    Double tap the home button and swipe upwards on the preview of the App (not the App Icon).
    http://manuals.info.apple.com/MANUALS/1000/MA1565/en_US/iphone_user_guide.pdf

  • When I tap on my Safari app. the iphone screen goes to a black blank screen. It has some stuff at the top like verizon 3g the time battery life. Whats wrong with it? Thats the only sceen doing it.

    When I tap on my Safari App. the Iphone screen goes to black blank screen. No other App. dose it
    . it started doing it right after I tapped on a screen that was all light blue with a circle with an arrow pointing towards the rigth hand side of screen. i had just been using the safari app search engine when this happen. How do I get the internet back.

    Reset the PRAM
    Reinstall the operating system from the dvd (you will not loose your data)

  • Should Bluetooth switched on all the time on my mac Pom pro

    Should I  Bluetooth switched on all the time on my mac Pom pro

    Use it only when you need it.  Keeping applications open which are not needed will just shorten battery life if you are under battery power and will unnecessarily slow down the MBP.
    Ciao.

  • Time Capsule - leaving it on all the time?

    Hello: I have a new Time Capsule, and use it as my primary network; it is connected to a DSL modem. Anyway, is there any reason that I should not leave it running around the clock? I have other people in my apartment who use it, so it would be inconvenient to turn it off and on.
    Thanks

    Mine has been on continuously since buying it when they came out in the UK in March. One thing it does very well is power up and down, minimising energy use. And the hard drive is supposed to be 'server-grade' or some such marketing tag.
    Seriously I think it really is meant to be left on all the time, otherwise, as you say, your network will come and go. Uses 30 watts according to the spec, but I don't know whether this is with the disk spinning or static.

  • Apple TV stays on all the time? Gets really hot.

    Should it just be left on all the time? Mine seems really hot. Is this safe?

    Mac Man wrote:
    Funny because when I do the same thing iTunes never looses the connection with AppleTV. Even with the light off, I can select AppleTV from the iTunes devices and manage the content. My experience has shown that AppleTV never sleeps or turns off.
    correct. itunes still does detect it.
    it appears the peoples definition of sleep differs somewhat.
    i class "sleep" as being in a device in a state where it is using less power than it would when in normal use.
    putting the appletv to "sleep" by holding power/pause for 5 seconds lowers the power consumption... so in my eyes this is "sleep".
    the appletv certainly does "hibernate", but it does "sleep".

  • AppleTV and iTunes without Leaving Computer On All The Time/NAS iTunes Server

    I begrudge having to leave my iMac on all the time just so now and again I can play music, pictures and video from it through AppleTV. My iMac is 2 floors up from the AppleTV, and as there is no wake on LAN working (I can't get it to work if there is (I have Lion)) I don't want to go up there to turn the Mac on when I want to use AppleTV.
    So I have read some articles about iTunes servers on NAS drives and wondered if that would be a good solution, anyone try them?
    If I did have my iTunes library on a NAS drive with an iTunes server, when I start iTunes on my iMac will it then load the iTunes Library as it does now like if it was a local library? So I can still manage it in the same way as I do on my Mac.
    I assume then I could have another computer use the same library on the NAS? (although wont do it the same time due to conflicts)
    I have iCloud/Match so not so bothered about music as I can play from the Cloud (although its hit ad miss sometimes), but I have videos and pictures I stream to AppleTV so they are more important. I don't want to have a computer left on all the time so I can use AppleTV.
    If this is not possible, then I am thinking of getting a Macbook for the lounge, but then I don't want to have to plug/unplug my external hard drives into it all the time, which I am likely to swap with the main iMac too.
    Thanks a lot

    P.S. I only play music from iCloud as my iMac is not on. So if I can stream to AppleTV without having a computer on, then I would do that to be faster, work all the time, and save bandwidth.

  • So I have an iPad 2 for two years. Has never been dropped or in water or damaged in any way....now the volume is distorted and I get booted off the web all the time. Plus it shows and no service in top left corner. Any one have these issues?

    So I got is iPad as a gift and the same issues I had with my iPhone 4S is also happening with my iPad. Will Apple cover the problem as it lies within there updates or something. All I know I have taken perfect care of both products and volume is distorted. Can't listen to music, I get booted off the web all the time, I can't even chat with Apple icare it won't work and no service shows on top left corner. What is wrong with Apple products? I'm thinking it's time to switch! I've had to change my iPhone twice now......first time for mic not working and then camera shutter kept sticking. Same on my iPad........ I don't want to pay to get this fixed as it's not my fault this is happening...... It's software apparently?

    This really is starting to feel like a hardware issue than a software one.
    Especially if hearing noises when you connecting up your iPad for charging.
    Something happened to your iPad that has nothing to do with a software update.
    This is why I recommend that
    I can't help you any farther.
    It sounds as if you really need to take this iPad in for a repair.
    Since you are reluctant to do this, there is nothing more I can suggest to you.
    Good Luck on whatever you decide to do.

Maybe you are looking for

  • Error in Consuming webservice proxy in SAP

    Hi, I have a webservice which I am not able to consume in SAP. I get an error 'Cannot generate Proxy (object <attribute name="arrayType"> missing in WSDL, see long text'). When i tried to search in SDN, I found a post which says that SAP doesnt suppo

  • Can't create event from iPad mail

    I Am using an iPad 2, with all updates.  When I try to create an event from an email, the right screen pops up, but the right hand side is cut off, so I have no save button.  Also can't change calendars, etc, because there is no save button on those

  • Dreamweaver to CF Builder Transition Guide. Please!

    It would be extremely helpful if someone would release some sort of documentation to help us long-time Dreamweaver users transition to CF Builder.  From what I've been reading there are LOTS of coders/developers who claim to hate CF Builder already. 

  • Importing images and event creation

    Hi, I'm using iPhoto 11 on my MacPro to import a folder of camera images from my Samsung Galaxy (booo! ) that's ive copied to my desktop. For some reason, iPhoto won't split the shots into events but creates one event with these images giving them th

  • Export data to excel without header in OBIEE

    Dear experts, I have some reports in OBIEE and I want to export them to excel or text(.csv), I want to export without header . How can I do that? Regards, David