Show an information message

Hi to everybody!!
I need to show a message before my program is executed. How can I do this? I have to tell the user that the file must have one structure.
Thanks a lot,
Regards,
Rebeca

Just check this..
REPORT ZTEST_MESSAGE_00.
data: sflight type sflight.
start-of-selection.
select * from sflight
into sflight
up to 1 rows.
endselect.
if sy-subrc eq 0.
message 'Records are there' type 'I'.
endif.
end-of-selection.
write: sflight-carrid.

Similar Messages

Want to show an information message in PA30 screen

Hi ABAP gurus,
   For Infotype9000,subtype RHUB(newly configured) ,I want to show an information message in PA30 initial screen for operations 'Create','Copy' and 'Delete'. For that , I have used a BADI (hrpad00infty) , written code in PBO method of the BADI.
The problem is this, we cannot show the message in PA30 screen,else it is showing a pop-up dialog box (information msg. is missing in the dialog box) in the next screen.
Our Requirement:
1. For the above mentioned operations , we want to show the information message in the PA30 initial screen.
Please post your valuable comments.

Hi
What you're trying to do is not really obvious for someone that's familiar with the usual USER-EXITs and BADIs in HR but there's a possible workaround using the BADI HR_F4_GET_SUBTYPE and its GET_SUBTYPE_TEXT method for your 9000 IT
METHOD if_ex_hr_f4_get_subtype~get_subtype_text.
*SUBTY Importing Type SUBTY
*PERSNR Importing Type PERNR_D
*TCLAS Importing Type TCLAS
*BEGDA Importing Type DATUM
*ENDDA Importing Type DATUM
*LANGU Importing Type SPRSL
*MOLGA Importing Type MOLGA
*FLT_VAL Importing Type INFTYPA
*STEXT Exporting Type SBTTX
FIELD-SYMBOLS <rp50g> TYPE rp50g.
ASSIGN: ('(SAPMP50A)RP50G') TO <rp50g>.
IF sy-subrc EQ 0.
    IF <rp50g>-infty EQ '9000' AND
       <rp50g>-subty EQ 'RHUB'    AND
     ( sy-ucomm      EQ 'INS' OR
       sy-ucomm      EQ 'COP' OR
       sy-ucomm      EQ 'DEL' ).
      MESSAGE i398(00) WITH 'Your message'.
    ENDIF.
ENDIF.
ENDMETHOD.

Information Message shows up as Success message

Hi Experts,
I have a strange issue when i am trying to show an information message on my screen it shows up as a Success message. I am sure about passing the right values to the method report_t100_message of the interface IF_WD_MESSAGE_MANAGER and even though i am passing I to msgty parameter of the above method it shows up as a success message.
is there no way to show an Information message in Webdynpro.
Thanks In Advance,
Chaitanya.

Hi,
If you look into the implementation of this method, you will see that message type S and I are treated the same way and therefore are presented as a "success" message.
What you could try is a popup to display your message.
Kind regards,
Jos

Information message

When I start my program I will show an information message about what the program does. Where in my program should I write this message and how?

Write this information Msg. after
Start-of-Selection.
Message "ABout Your Program" type 'I'.
If it is a dialog Program
Then write the same in PBO of the screen.
Hope it works 4 u
Do rewards...if it helps.
Regards
Sachin Dhingra

Supressing the information message in ALE

Hi All,
I created a report which will call this bd10 based on the selection screen parameters. it is executing correctly, but this tcode should be given to end users.
generally after execution of BD10 , it will give the information message 1 master idoc is setup and after entering this it will show another information message like 1 communication idoc is setup for this. I dont need to display these two messages. <b>how to supress this information message.</b>
Is it possible?
Regards,
vinoth.

Hi,
This can be possible,but its beyond a developers rights,this information message will be displayed always.
if you want to avoid it run in background.
regards,
pankaj singh

Close Popup on clicking OK button of Information Message Dialog

JDev 11.1.1.5.0 ADF BC
I have a popup and a dialog inside it where user inputs some data and clicks Save button.
I am showing an Information message on click of Save on successful insertion of data into the database.
What I am looking to achieve is that I want to close the popup window on click of the OK button which is inside the information message dialog that is been shown on successful Saving of data.
There is already a similar thread Close popup in adf but that doesn't have a correct answer.

1) Bind the main popup to a bean variable:
<af:popup id="mainPopup" binding="#{MyBean.myPopup}" ...>
public class MyBean
private RichPopup myPopup;
}2) Add a DialogListener to the <af:dialog> of the information message:
<af:popup id="infoPopup">
<af:dialog dialogListener="#{MyBean.infoPopupDialogListener}">
... Info message here ...
</af:dialog>
</af:popup>3) Use this DialogListener to close the main popup programatically:
public void infoPopupDialogListener(DialogEvent dialogEvent) {
myPopup.hide();
}Dimitar

HT201272 i am going to download something free and it show me a message about billing information why?

i am going to download something free and it show me a message about billing information why?

You are having this problem because you are trying to use an existing Apple ID. There is a process, that if you follow and create a new Apple ID with an iTunes/Mac App Store account, you can create the account without a bank card.
http://support.apple.com/kb/ht2534

Can we show information messages after triggring IDOC's in background

Hi friends,
Iam executing one custom transaction for sales cycle in background, in that iam trigging IDOC's, user are getting the messages like
1. Idoc No: 0000014254 despatched to client -
2. 1Output were processed.
3. 1 IDOC's selected.
user has to enter 3 times while the transaction is running in background.
But requirement is "can i set all 3 information messages after trigging IDOC's to background.
any body suggest the solution.
regards,
vamsy krishna.

Nope nope, I don't work for Apple - I'm just a Level 3 Discussions pleb...! ;-))
I'd been in touch with the senior tiers of Apple Support on the phone to diagnose the chkdsk incidents of 2004-2005.
Following that, I also negotiated (part-)resolution to the Smart Playlist issue.
Since Updater 2006-01-10 (part-)fixed the Smart Playlist problem, but seemed to introduce some other issues for folks, I've been continuing to pass feedback from my Level 2 contact who is handling investigation of the latest problems. In turn, he is working with US Engineering to handle this issue.
So no, I'm not Apple, but I (and some others) pass commentary to and fro between Discussions and Level 2 Support, and by by-passing Front Line phone support, it helps us to get serious issues investigated and resolved more quickly. I find that such an approach for serious problems works well to help the Community.
I'm not sure if my message gives hope - but I do hope that having reported this on up to Level 2, and having been told that US Engineering have teams watching Discussions, that maybe we can expect some attention from Apple R&D on this matter. However, the official line is for individuals to contact Apple directly themselves via the phone and website feedback, so US Engineering have an idea of the number of people affected. The more people who report to Apple directly, the more likely the problem is to be noticed, and hence the priority for investigation and resolution increases. I can start an unofficial ball rolling, as I have done, but we cannot keep the momentum up unless users use these official routes to let Apple know they are affected.
Sorry it's all a bit foggy, but it's the best I've got! Hope this little explanation helps to clarify things a bit more. Feel free to post back if you'd like to discuss this further. Best for now.
Kind regards,
Gopha.

Why is Information message showing up

we have certain user that is getting a info message and need to know why.
its the oaf Information message box. states.........
The current responsibility context has been switched to: (responsibility) just below there is a lov w/ menu names
not everyone is getting it. is this a profile setting. if so what is it. i have confirmed the system/personal FND:Diagnostics is set to no.
thanks

This is because the function they are accessing is not accessible from the responsibility(they are using now) but is accessible from other responsibilities(the employee already has). If you are using User Management try to give them access to the functions using User Management.
Regards,
Peddi.

When I try to play a song on my iPod Touch, it shows the information screen for the song and then skips to a new song but then goes back to the main playlist page without ever playing a song! Help!

When I try to play a song on my iPod Touch, it shows the information screen for the song and then skips to a new song but then goes back to the main playlist page without ever playing a song! Help!

thats tough man, yeah exchanging it is the best option. But why do people always leave a message saying" i'll probably just by an ipod" and it's usually followed by, "even though i don't like apple or ipod" . I mean fine, if u feel like giving up on the zen micro thats fine, i personally don't care if you're going to buy an ipod. for god sakes ipod isn't even the next alternati've mp3 players, theres plenty. Are u just trying to get the creative people saying "oh man we lost another one to ipod" cuz i'm sure they don't lose sleep over u wanting to buy an ipod instead of a zen. *done ranting*
Message Edited by bleakreserve on 02-3-2005 06:34 AM

I just brought a apple protection plan as my phone warranty is going to end in a day, when i am trying to enter the protection plan code and my phone serial no its showing an error message try after some time is there any solution to that?

i just brought a apple protection plan as my phone warranty is going to end in a day, after entering the protection plan code and my phone serial no its showing an error message "technical error try after some time", is there any solution for that?
As i need the warranty to extend for another year please help me regarding this issue.
When i bought a new iphone5 in Inda after using it for three days lock button was not working properly and it was warranty claimed and exchanged from apple service center in India, for the same phone I want to extend the warranty but its showing a error message is there any solution?

Here is some information on the applecare +:
http://www.apple.com/support/products/iphone.html
It appears that you have to buy the applecare within 30 days of buying your phone - you said that your phone warranty is almost over, so when did you buy it??? That could be the explanation for the error.

No Free/Busy Information for Exchange 2010 users in Outlook 2010 client, 2010 OWA shows this information fine

I have looked for hours and hours on Google and this web site for this type of issue and nothing seems to help.
Problem:
On my new Windows 2008 R2 /Exchange 2010 server with IIS7 installed, I can use Outlook 2010 client to login and send and receive e-mail but when I try to busy search internal Exchange users I get no information (cross-hatch), but the sender of the Meeting Request
can see their own free/busy information fine. And OWA users can see free/busy information fine, as can Outlook 2003 client users against this Exchange 2010 server when logged in.
I don't know if I have a certificate problem with regard to IIS7 or Exchange 2010, I did not create my own certificate , it is just what was installed by default when I installed and configured Win2K8 server, IIS7 and Exchange.
On the Windows 7 workstations with Outlook 2010 client, I am not logging into the Exchange 2010 server DNS domain, if that makes any difference. On these workstations I can ping "autodiscover.my.exchange.server.com" and my.exchange.server.com
with no problem. I even used this Microsoft KB to install a new _autodiscover dns entry, but it did not help :
When I turn on logging on my Outlook 2010 client, I see this in my C:\Users\Administrator\AppData\Local\Temp\1\outlook logging\20131208-135658864-fb.log :
2013/12/08 13:56:58.864: Getting ASURL
2013/12/08 13:56:58.864: URL returned from cached autodiscover: blah blah
2013/12/08 13:56:58.864: Request to URL:
2013/12/08 13:56:58.864: Request action:
2013/12/08 13:56:58.864: Request XML: <?xml version="1.0"?>
2013/12/08 13:56:59.051: Request sent
2013/12/08 13:56:59.051: Response error code: 00000000
2013/12/08 13:56:59.051: HTTP status code: 0
2013/12/08 13:56:59.051: -------------------------------
2013/12/08 13:56:59.051: There is an error in request/response.
2013/12/08 13:56:59.051: XML response:
2013/12/08 13:56:59.051: -------------------------------
2013/12/08 13:56:59.051: Getting ASURL
2013/12/08 13:56:59.644: Failed to get ASURL. Error 8004010F
At an Exchange shell console I enter this command and get these results :
Exchnage Management Shell :
VERBOSE: Connecting to BPExchange2010.my.exchange.server.com
VERBOSE: Connected to BPExchange2010.my.exchange.server.com.
[PS] C:\Windows\system32>Test-OutlookWebServices -id:[email protected] -TargetAddress:[email protected]
ll.com
RunspaceId : c929eacd-d53c-49d7-8532-c4b74e61b8be
Id : 1019
Type : Information
Message : A valid Autodiscover service connection point was found. The Autodiscover URL on this object is
Type : Success
Message : [Server] Successfully contacted the UM service at https://bpexchange2010.my.exchange.server.com/ews/exchan
ge.asmx. The elapsed time was 234 milliseconds.
[PS] C:\Windows\system32>
** Also frequently when I log into Outlook 2010 client and start to send a meeting request , I get the Security Alert dialog :
autodiscover.my.exchange.server.com
Information you exchange with this site cannot be viewed or changed by others. However, there is a problem with the site's security certificate.
Green Check Mark : The security cerficate is from a trusted certifying authority
Green Check Mark: The security certificate date is valid
Red X : The name on the security certificate is invalid or does not match the name of the site.
Do you want to proceed ? . I either import the certificate or click YES, but does not help this issue.
NOTE: Each user that shows as NO INFORMATION cross-hatch, these users have appointments and have logged into outlook before.
When I do this autodiscover url from a Windows 7 pc with outlook 2010 I get :
This XML file does not appear to have any style information associated with it. The document tree is shown below.
<Autodiscover xmlns="http://schemas.microsoft.com/exchange/autodiscover/responseschema/2006">
<Response>
<Error Time="14:47:01.5656198" Id="401440650">
<ErrorCode>600</ErrorCode>
<Message>Invalid Request</Message>
<DebugData/>
</Error>
</Response>
</Autodiscover>
Can anyone assist ? What am I missing ?
Thank You
NOTE: When will this go away. I had to strip out a lot of helpful information to post this. "Body text cannot contain images or links until we are able to verify your account."

Hi,
How many users encounter this issue, all users with Outlook 2010 or some specific users?
According to your post, the Error code 600 indicates that your Autodiscover service is working well. as for the certificate mismatch issue, we can also following the KB below to resolve it:
http://support.microsoft.com/kb/940726/en-us
The Free/Busy information in Exchange 2010 is using the Availability service to
retrieve it. Please directly access
https://mail.mydomain.ae/EWS/Exchange.asmx in IE and see whether a proper XML file is returned.
Or we can go to
https://testexchangeconnectivity.com and check MS Exchange Web Services Connectivity Tests.
Thanks,
Winnie Liang
TechNet Community Support

Information message for duplicate vendor check( message 144)

Hello everyone, i am trying to configure information warning message in vendors. The configuration for this is SPRO-IMG-FA-AR/AP-vendor accounts-master data-preprations for creating vendor master data-change message control for vendor master data.
I need to configure
message: 144
message text: vendors with the same address:check
online: I information message
When i enter the new entry, i can see MsgNo 144 under the MsgNo but under "online" i need to use I: informational message but i dont see that option under there. I think i need to configure that message ( I: information message) under "online". Does why one know how to configure that? Any suggestions will be appreciated.
Regards

Hi there ,
By default it will show Information message only.
Why there is any need of changing anything?

How to show a success message in a dialogue at the top of the page

Hi,
Can someone please tell me how to show the dialogue message at the top of the page on successfully inserting a record in the database. Current I have 2 pages from first page user navigates to the second page where the information entered on the page is saved in the database on successful commit I am forwarding back to the first page where I need to show a message a record saved successfully. Can someone tell me how to do that. Currently in my second page I have the following
OAException confirmMessage = new OAException("Record has been added successfully.",
                                                       OAException.CONFIRMATION);
          pageContext.putDialogMessage(confirmMessage);
          pageContext.forwardImmediately("OA.jsp?page=<back_to_first_page>",
                              null,
                              OAWebBeanConstants.KEEP_MENU_CONTEXT,
                              null,
                              null,
                              true, // Retain AM
                              OAWebBeanConstants.ADD_BREAD_CRUMB_NO);but I don't see a message at the top of the first page. Any help is appreciated.
Thanks

Hi guru,
forwardImmediately or setForwardURL would not swallow any messages.
The folllowing code works in create page of toolbox tutorials.
MessageToken[] tokens = { new MessageToken("EMP_NAME", employeeName),
new MessageToken("EMP_NUMBER", employeeNum) };
OAException confirmMessage = new OAException("AK", "FWK_TBX_T_EMP_CREATE_CONFIRM", tokens,
OAException.CONFIRMATION, null);
pageContext.putDialogMessage(confirmMessage);
pageContext.forwardImmediately("OA.jsp?page=/<yourname>/oracle/apps/ak/employee/webui/EmpSearchPG",
null,
OAWebBeanConstants.KEEP_MENU_CONTEXT,
null,
null,
true, // retain AM
OAWebBeanConstants.ADD_BREAD_CRUMB_NO);
--Prasanna

When using spotlight search on my 5s it will not show past text messages that haven't even been deleted even if I type a specific word that I know is in a message I want to search for. I have message search turned on in the spotlight settings.

When using spotlight search my phone will not show all text messages with a common word even though I have not deleted any messages from my phone and I have the message search turned on in settings under spotlight search. The search only shows the messages that are recent within the past day or so. Why won't it show the other messages when I search for them even using a specific word that I know was in the message I'm searching for.

Hello ChiomaM,
It sounds like you are not getting notifications for new text messages that are coming in, and you must manually check the app. I recommend checking the Notification settings to see if they are configured correctly:
iOS: Understanding notifications
http://support.apple.com/kb/ht3576
iOS apps can provide three types of notifications:
Sounds: An audible alert plays.
Alerts/Banners: An alert or banner appears on the screen.
Badges: An image or number appears on the application icon.
You can view which apps provide notifications and adjust notification settings using Settings > Notification Center. For additional information, refer to the user guide for your device.
Thank you for using Apple Support Communities.
Regards,
Sterling

Show an information message

Similar Messages

Maybe you are looking for