Show complete date range in chart

I created a table of three columns -- date, person 1, and person 2. Under each person and across from each date is a value (the person's weight). The dates run from March 2 to June 9. When I turned the data in this table into a simple line chart, the chart shows data values only from May 8 to June 6. I have recreated the chart several times, thinking that I must have missed highlighting some of the cells, but I get the same results every time. What am I missing? Thanks for any help you can offer. Dick

Hello Frederick,
A single unit (1.0) of Date/Time is a Day. You can enter a Date, format it to your liking, do math on it, and create strings that combine dates. Here's an example:
The expression in the Week Range cells under Start Date-> is:
=$B$1+(ROW()-2)*7&"-"&$B$1+(ROW()-1)*7-1
Give it a try,
Jerry

Similar Messages

Query not showing complete data

Hi,
I faced this issue many times. Original query is not showing complete data but when I create a new query with same rows, columns and filters it gives correct data. Do anybody have any idea what can be the problem?

Below is the checklist :
1. Make sure you have same number of filters/ restrictions in both the queries.
2. Make sure you are not using any authorisation object.
3. Make sure the technical names of the objects you are using in the query are name.
4. Make sure both the queries are on the same multiprovider.
5. Make sure both are of same version.
These are very basic things, I assume you must have done. But these are the only possibilities I could think of.
If this is fine, then as suggested by Raman you can add one object each time in both the queries and test the output. You might get some clue.
Thanks,

Active sessions showing no data in pie-chart

Hi All,
Does anyone know why my Enterprise Manager cosole in Oracle 10g installed on windows xp professional is not showing any data? Availabilty is always 0% for the instance ORCL and the active sessions pie-chart is always showing 0.01 since May 17,2005.
Can anyone tell me how to configure EM so that instance ORCL and the active sessions start showing data again?
Thanks

What errors were you seeing in the log files, i am experienceing the same issue but the listener appears to be fine.

Possible to show null data in bar chart?

I am creating a report that has a chart that charts when a part was rejected and who it was rejected by (customer or internal). The problem is, that when I create the chart it does not show dates when there is no rejection. I would like the chart to show each day for the month even if there was no rejection. Is there a way to do this?
Thanks,
Cody

hi Cody,
for missing dates, there's a bunch of solutions reviewed here
thanks,
-jamie

SharePoint 2010 Site Web Analytics - Top Pages report not showing complete data

Hi,
I have a custom page in a team site which takes list ID as an argument and shows the relevant data e.g.
../Dashboards/View%20Briefing.aspx?BriefingID=1078
../Dashboards/View%20Briefing.aspx?BriefingID=1079 etc
When i look at the Top Pages report under Site Web Analytics all i can see is data for:
/dashboards/view briefing.aspx
I need stats for individual list items i.e. how many time BreifingID 1078 was viewed etc. Is it possible to achieve this using OOTB reports or can i write a custom report to achieve this? If yes then how...
Any help would be appreciated.
Regards,
Kashif

You’re dynamically filtering content on a single page with values on the query string. Your users are still only hitting one page (View%20Briefing.aspx). Analytics only sees that 'View%20Briefing.aspx' is being hit; it won’t record stats for what’s specified
on the query string.
I expect you could pull this data out of your IIS logs using log parser. Some links on this subject:
http://www.toddklindt.com/blog/Lists/Posts/Post.aspx?ID=85
http://blogs.technet.com/b/corybu/archive/2008/02/26/sharepoint-iis-traffic-analysis.aspx
http://social.technet.microsoft.com/wiki/contents/articles/16072.sharepoint-2010-create-analytic-reports-using-logparser-and-powershell.aspx
http://blogs.msdn.com/b/carlosag/archive/2010/03/25/analyze-your-iis-log-files-favorite-log-parser-queries.aspx
http://logparserplus.com/Examples

RFC WHICH CAN USE DYNAMIC SQL AS INPUT AND SHOW COMPLETE DATA FOR TABLE

Hi Expert,
I am trying to create a FM like RFC_READ_TABLE. In this table we put table name and the field name for which we write a query and option for query we get the out put only for that field in this case.
My requirement is very similar to this. But here i want to enter any table name and in option i want to write dynamic sql query for any filed of table then i want data based on this so that it will display the entire table entries.
Like TABNAMELIKE     EKKO
OTHERCON     bukrs_k = 3000.
Based on this selection it has to show the entire table fields.
To make this easy to understand i made a custom FM which are getting data from table or view and i select any field and put query it will show the result.
FUNCTION ZDYNSQL_EKKO_EKPO.
""Local Interface:
*" IMPORTING
*"     VALUE(ERNAMLIKE) TYPE CHAR15 OPTIONAL
*"     VALUE(OTHERCON) TYPE CHAR50 OPTIONAL
*" TABLES
*"      VALUE STRUCTURE V_EKKO_EKPO
*TABLES : V_EKKO_EKPO, EKKO, EKPO.
DATA: STR_WHERE TYPE TABLE OF EDPLINE.
DATA: STR_LINE TYPE EDPLINE.
*CONCATENATE 'EBELN LIKE''' EBELNLIKE '%''' INTO STR_LINE.
        CONCATENATE 'ERNAM LIKE ''' ERNAMLIKE '%''' INTO STR_LINE.
        IF OTHERCON <> '            '.
        CONCATENATE STR_LINE 'AND' OTHERCON '            ' INTO STR_LINE SEPARATED BY SPACE.
        ENDIF.
      APPEND STR_LINE TO STR_WHERE.
      SELECT * FROM V_EKKO_EKPO INTO CORRESPONDING FIELDS OF TABLE VALUE WHERE (STR_WHERE).
ENDFUNCTION.
Now here is sample code of exact requirement.
FUNCTION ZDYNSQL_TABLE_READ.
""Local Interface:
*" IMPORTING
*"     VALUE(TABNAMELIKE) TYPE DD02L-TABNAME
*"     VALUE(OTHERCON) TYPE CHAR80 OPTIONAL
*" TABLES
*"      VALUE STRUCTURE DD02L
DATA: STR_WHERE TYPE TABLE OF EDPLINE.
DATA: STR_LINE TYPE STRING.
        CONCATENATE 'TABNAME LIKE ''' TABNAMELIKE '%' 'DD02L' 'TABNAME' INTO STR_LINE.
        IF OTHERCON <> '            '.
        CONCATENATE STR_LINE 'AND' OTHERCON '            ' INTO STR_LINE SEPARATED BY SPACE.
        ENDIF.
      APPEND STR_LINE TO STR_WHERE.
      SELECT * FROM DD02L INTO CORRESPONDING FIELDS OF TABLE VALUE WHERE (STR_WHERE).
ENDFUNCTION.
In this i put table name as EKKO and put sql query as bukrs_k = 3000 it provide a short dump.
How can i solve this problem. Please provide some input or modification
Thanks And Regards
Ranjeet Singh

Hi Kris,
I tried to make sample using that link you provide to me. How can i declare Global Interface in FM and in import parameter references like "REFERENCE(I_INTERFACE_CHECK) DEFAULT SPACE".
Also it uses a function-pool.
Let me tell you about my exact requirement about FM.
I want in import parameter input as any SAP Table name like
TABNAME TYPE EKKO
OPTIONS TYPE CHAR80
I want my output to be stored in TABLES attributes as per the table name entered in import parameter. In import parameter Table name can be any one of SAP tables and Option based on that particular table. Like if i go with table EKKO and put OPTIONS as
ebelp = 4 then TABLES attributes Tab contains all the relevant data for input.
Is there any way with the help of that i can put my data into internal tables. I tried to put in TABLES as VALUE LIKE ANY but it shows that generic are not allowed. Can you provide some sample on this.
I also getting exceptions like CX_SY_DYNAMIC_OSQL_SEMANTICS, SAPSQL_INVALID_FIELDNAME.
Waiting for your valuable reply.
Thanks And Regards
Ranjeet Singh

Report Not showing complete data.

Hi All,
I am new to crystal Reports.
I have two tables Location_details and Revenues.
I created a crosstab report with rows being Region and Location and column is a MONTH.
The Summary field is Total Revenues for a location for that particular month.
When I am trying to run this cross tab report It doesnot give all the locations in the report.
But when i See these in database it gives all the location (120 locations)
some of them have no revenues in that particular month.
but in cross tab am able to see only 45 locations.
How can I solve this issue.
Your guidance will be appreciated.
Thanks
Nani.

how are you tables joined, equal joins?
they should be left outer, if they are equal you will only get locations with revenue.
a cross tab actually displays the values in one page you need to go to the right to see all your values, cross tabs can be very large and cumbersome and will never print correctly on one page.
what are you trying to put together?
revenue by location?
i would create a reqular report
create a group for location
then sum the revenue on the location group

Calendar Showing Date Range

Does anyone know where I can find an example of a calendar showing a date range.
I would like to show a start date and an end date of an event on the calendar
Cheers
Gus

Hi Gus,
In that case, you need to create a record for each individual date covered by the period. Obviously, for space/maintenance reasons, you wouldn't want to do this on actual tables, but there are techniques that you can use to construct the required virtual records - some are discussed here: vacation calendar- time consuming query ??
Andy

Can we print an array of dates on the chart X-Axis?

Hi,
I have a requirement in which I have to print all the dates in the selected date range on the chart axis even though I donu2019t have the data for all the dates in my DB.I did not find any direct solution in Crystal Report Designer (2008, XI) except we can use "time scale" option in axes tab of chart option but this option also does not provide the required behavior completely.
After implementing this option I get the date range on chart but from the date I have data in the DB and to the date I have the data in the DB.
For Example, though I have selected the date range from 2nd April to 8th April, dates in the chart are starting from 5th April since I have the data in the DB of 5th April and 8th April.
To overcome this limitation of crystal report I thought of creating an array of dates of the selected date range. I can create the array of dates in crystal report but donu2019t know how to use this array in chart to show the summary data.
I also want to base my Group on this array since I want to show all the dates in group even with count zero.
Thanks & Regards,
Amrita

Hi Sourashree,
I am using the following formula to create an array of dates.
numbervar dateDiff:={?eDate}-{?bDate};
dateTimeVar array dateArray;
numbervar i;
for i :=1 to 7 do
    redim preserve dateArray<i>;
if(i=1) then
    dateArray<i>:={?bDate}
else
    dateArray<i>:={?bDate}+i;
This formula is a print time formula since when I specify "WhileReadingRecords" array remains blank (I have confirmed this by returning any single value from the array).
I can not base my Group and Chart on any Print Time formula since these two get calculates at read time.
Can you please let me know if there is any other way of creating the array at read time? Or should I create the array in main report and then pass it to sub report?
Regards,
Amrita

Format Date Range in Select Statement e.b. 4/10/14 - 4/09/15

So far thanks for all the help you've provided me on here. I'm a long time Access developer and have just worked with SQL very little throughout the years but now I'm working full-scale in it, so a learning process for me.
I am familiar with the DateADD function in SQL DATEADD(mm, 1, GETDATE()) AS MyDate. The part that I'm struggling with is that I need to show a date range in a single field. I can not do it by having that function twice because of the character"-",
which will throw and error. I played around with the "Convert" function some and I am thinking that a combination of the Convert and DateADD functions would be the way to accomplish this but I'm not sure.
Basically what I need is using today's date as an example, I would need the result to return 04/10/14-04/09/15. Any assistance would be appreciated.

This is not being used as a back-end to any type of user interface, so doing it on the front-end is not an option. The data is being exported out to text files, so it needs to be exactly as I had in the example as a single field.
Thanks all for the feedback. Latheesh's post is the closest to what I need, in fact it's exactly what I'm looking for, which is below.
Select Convert(varchar(20),DATEADD(mm, 1, GETDATE()),10 ) +' ---- '+ Convert(Varchar(20),DATEADD(mm, 12, GETDATE()),10)
Ok, I got it working. Actually, turns out that it's not much different than Access syntax other than convert is used in place of Format. DateAdd, DateDiff, etc. are all used in Access as well. Thanks for all the help.

IPhoto Events 'date range' have ALL changed by 16 yrs+

I'm very new to iMac (from Windows) and when I was editing some Events in iPhoto somehow I've managed to change all the Events to a random date range of 'now to 16yrs +' ... Is there a way that I can revert to the a previous version for dates of Events or will I have to copy a back-up version from Time Machine into iPhotos? I have 6000+ photos and any help would be appreciated!

Thanks for reply .. yes, I'm talking about the Event date (I think it is in grey underneath the key photo in Event view). I think when I was updating the date range of a couple of Events (that were showing a date range back to 1993 at the time) I inadvertantly applied a new date range to ALL of my Events (not sure how I did that).
I've read a few posts about 'bugs' but I think if have the most recent update!
Some of the more recent Events I can manually amend but for those photos that are quite a few years old, it now displays a date range - in some cases up to 2028 - and I would like to be able to see the 'original' date that the photo was taken.
I am on iPhoto 11 (9.1.5) and using Lion OS.
I have checked System Preferences> Date & Time and I don't appear to have a 'custom' date/time preference.

Date range in the view

Hi Team,
I created one sales report but here my requirement is it as to show the date range i.e (1-07-2012 To 30-07-2012) in the title view.
Is this possible by using variables can any one send clear steps how to achieve this.
Thanks,

Hi User,
May i know how did you created the sales report.
You said that you dont have any date range or date fields in your tables/report.
Then, what are the results... how do you know for which date range did you created the report ?
Is it default report which generated for the entire database without selecting dates ?

How can I show a 0% range in the data value label on a bar chart thanks?

How can I show a 0% range in the data value label on a bar chart thanks?

I'm not sure what the question is.
I know that if you have a bar chart and one of the categories (X-axis) has bar (Y value) equal to 0%, no bar is plotted for that category. Even the addition of a stroke (line) around the bars doesn't make one appear for 0%. The only automatic way I know of to make it look like there is data in that category is to add the value labels to the bars. Inspector/Chart/Series, select one of the bars on the chart, click on "value labels". Another method that is a workaround is to fudge the number a little in your table so that instead of 0% it is a very small %. This will get you a thin line on the chart.
But if your question is about the value labels (the numbers that display on or in the bars) and you are not getting one for a bar that is supposed to be 0%, it probably means your table doesn't actually have a 0% in the corresponding cell. A blank cell in the table will not get a value label.

How to see Control chart for a specific date range in QGC3

Hi
I am developing SPC for my client.I am facing one problem.
I am using one control chart for all inspection lot for a particular MIC.Free inspection point is used in inspection plan.
Control chart is used 516.(XMR chart)
Now when i am calling control chart for MIC executing QGC3,chart is showing results since creation chart date to todays date.
Now if i want to see chart for a particular period or date range,what is the procedure.
Thanks in advance
Nilanjan

Hi,
1. Even though when i give the Created on, and to date the system is displaying the report which is prior to the created on date.
2. Similarly the report data is different when the field is maximum no of Hits is given. for example when i giving this field as 10, 20, 30, etc the report is showing only 10 line items. if i enter 50, 60 etc it is showing the list for half i given.
Note that system is having more than 1000 line items to display..
Regards,
R. Loganathan

Ms Project 2013 report for resource name, tasks less than 100% complete within a date range I can set each time

I have seen I can create a report for a resource name with a specified date range, and one that can show me for a resource name any incomplete tasks, but I want to do the following and cant work out how to state it in the report constructor:
resource name equals - {I want to set a given resource in here}
% complete is less than 100%
start - date range is between [today -7 days] and [today +7 days]
Please can someone show me how this is possible, I know it will be and it is me that has been defeated!!

workspacedesign,
Oops, my bad. I missed the point that the Name field for assignment rows will be the task name and that's not what you want. There is also a glitch in the date range filter. So, here's how to fix that.
First, in the Resource Usage view, copy the Name field to Text1. Now select the resource line and do a fill down for all assignments under that resource. Do that for each resource. This could be automated with VBA, but for now, a manual setup should work
fine.
Second, instead of testing for the Name field in the filter, test for the Text1 field.
Third, change the Finish test to be "less than or equal to".
Now when you apply that filter, enter beginning date of your range and then the ending date of your range followed by the resource name. You should get the data you want.
Unfortunately formulas in custom fields are not as flexible in Project as they are in Excel. For example, in Project a formula can only operate on data for that row. Further, even if you use the formula Today() +7 for your filter criteria, the first time
the filter is used, Project will hard code today's date into the filter. The normal way around both of these shortcomings is to use VBA.
Hope this helps.
John

Show complete date range in chart

Similar Messages

Maybe you are looking for