Show data labels vertically
Is there a way to show the data labels of a column chart vertically?
Thanks greg ,
I didn't express myself clearly.. I mean bar's values, like the image below:
[http://www.gslr.de/chart.png]
I'm selecting in chart's properties, on appearance->text the checkbox data labels.
Thanks in advance for your help.
Similar Messages
-
How to change charts default "show data label" properties.
I tried to change some defult properties of charts.I changed font, color etc, manipulating pcxml file. But i can't fount defult behaviour of data lables. I want to change defult chart "Show Data Labels" properties as "Alwasy" , not "On rollover".
Thanks for all replyYou need to go to the General Properties : Data Labels: Always
Thanks
Prash -
Can't show data labels in pie graphs as decimal number if the crosstab data
I want to show my data labels in diagrams, as percent values, with three decimals.
It occurs (in version Oracle Business Intelligence Discoverer Plus 10g (10.1.2.55.26)) it is only possible if the data format of the crosstab data also shows data with decimals. If the data are in integer format, the graphs data labels can only be shown in integer as well.
Does anyone know how to fix the problem?
In version Oracle Business Intelligence Discoverer Plus 10g (10.1.2.48.18) we can have a crosstab showing integers and a pie graph showing labels of pie slices where the labels are in percent with three decimals. It seems it does not work in the newer version Oracle Business Intelligence Discoverer Plus 10g (10.1.2.55.26)
Thanks in advanceIt seems I have another similar problem in version Oracle Business Intelligence Discoverer Plus 10g (10.1.2.55.26):
I have a Bar (Percent) graph based on a crosstab where the data is formatted as number with two decimals.
The labels in the graph shows as number (0,76 instead of 76% and 0,13 instead of 13%). I want them to be shown in percent format.
The Data Label format is set to “Number” with two decimals. I can change the Data Labels to Percent with two decimals and then it shows the data labels in the graph exactly as I want it. But after I have saved the workbook and then opened it again the changes has been “revoked” and is once again set to number with two decimals instead of percent.
thanks (again) in advance -
Show Data labels on stacked bar chart
Hi All:
I am trying to show an inside data label on a stacked bar chart. For some reason Flex 4 does not like labelPosition="inside" in the mx below. Thanks Bob
<mx:BarChart
id="ProxChart" x="85" y="76" height="192" width="630" type="stacked">
<mx:horizontalAxis>
<mx:LinearAxis maximum="20"/>
</mx:horizontalAxis>
<mx:series>
<mx:BarSeries id="MySeries" displayName="Test" xField="" labelPosition="inside"/>This will do it.
import mx.charts.*;
private function myLabelFunction(element:ChartItem, series:BarSeries):String
return(element.item.toFixed(1));
<mx:series>
<mx:BarSeries id="MySeries" displayName="Test" xField="" labelPosition="inside" labelFunction="myLabelFunction"/> -
Pivot Table Chart - Show Data Labels
Hi all,
I have a pivot table report that can show as many as 20 columns, which translate to 20 data lines in the pivot chart. When you float your pointer over a line it tells you the value of the line at that point, but it doesnt tell you the column that it relates to or the value of the bottom axis. So say the open sales for London on 20/01/2010 is 12345, it will only show you "12345"
Does anyone know if its possible or have a solution to get it to display "London, 20/01/2010, 12345"
Thanks in advanceThanks John, that link was very helpful.
Shame you can't seem to get the X & Y values for a normal Line chart though. However having the series name available makes such a difference -
Miss data label when desktopintelligence report saved as excel
BO version is XIR2 Sp2.
create a column chart with 2 measures in deski.
show data labels for these 2 columns, it is ok in deski.
but when save the report as excel format, found data label only shown on first column, and miss the label for another column.
Is it a bug in bo?
please advise, thanksHi Zhang,
The issue you are getting is fixed in SP3 similar issues were reported as bug previously.
Following are the details could you please test the issue on SP3 under test environment.
ADAPT00785260 Value of labels on line chart doesn't show when report is saved in excel and chart contains an additional group.
ADAPT00864551 - Axis Label is missing when you do save as xls for the Deski Reports with charts.
Regards,
Sarbhjeet Kaur -
How to dynamically display data labels in area chart
Hello, everyone,
I have an stacked area chart with the data set as follows:
Values: sales
Category Group: date
Series Group: products
Now I have an requirement to display the data labels in the chart for the top 3 products with the highest sales within a certain time period (based on the date parameter). E.g. product1 in the product 1 area, product 2 in the product 2 area, etc.
Is this possible? If so how do I go about doing it?
Your help is much appreciated
Kind regardsHi QQFA,
According to your description, you have a stacked area chart. Values is sales, Category Group is date, and Series Group is product. Now you want to show only top 3 products which has the highest sales data labels for each date.
In SQL SERVER Reporting Service, we can achieve this goal by using expression in Series Label Properties setting. I have tested it on my local environment, you can follow these steps below:
Create a new DataSet(name is “top3”).
Select use a embedded dataset in my report and put
“ select * from(
select Product,Sales,[Date],
ROW_NUMBER() over (partition by [Date] order by Sales desc) as rn
from #temp)
where rn<4 ”
into Query.
Right Click on your chart, select “show Data Labels”.
Right Click on any label that just appeared, select Series Labels Properties .
Click the “fx” next to Label data textbox.
Type the expression below into Set expression for Label :
“=IIF(InStr(Join(
lookupset(Fields!Date.Value,Fields!Date.Value,Fields!Product.Value,
"top3"),","),Fields!Product.Value)>0,Fields!Sales.Value,"")”
(Ps: the “lookupset” function is only supported in SQL SERVER 2008 R2 or later)
Click “OK”.
Save and preview the chart ,as shown here:
Now your chart will show you the top 3 highest sales product data labels in corresponding area.
Reference:
LookupSet Function
Expression and Functions
If you have any question ,please feel free to ask.
Best Regards,
Simon -
BarLine Combo graph data labels
Hi All,
In a bar-line combo graph, i want to show the data labels of the bar always and show the line data labels when i rollover it. how can i implement it?
I changed the 'show data labels' to 'always' in general chart properties which is making all the labels to show instead i just want bar data to be shown always.
ThanksYou might have to build a custom chart type (by copying the original) and modify the system properties to acheive it ... but really I'm not sure if you'll get that level of control.
-
How to show data vertical in ALV
How to show data vertical in ALV?
such as :
[http://img402.imageshack.us/img402/9978/20101230215621.png|http://img402.imageshack.us/img402/9978/20101230215621.png]
Moderator Message: Search for available information. Keywords - Dynamic Internal Table
Edited by: kishan P on Dec 30, 2010 7:35 PMTranspose the contents of your internal table.
Original:
A 1 1 1
B 2 2 2
Transposed:
A B
1 2
1 2
1 2 -
Keynote data labels, can I show category names instead of data values?
I'd like to recreate the chart below in Keynote. The chart below is an excel line chart with the lines removed. In excel I can opt to show category names instead of values for the data labels. Can I do this in Keynote?
You can select member name or alias or both in the Dimension property while creating the form.
It is in the same window as explained earlier, you need to just select both the Member and its Aliase to be displayed on the form.
Thanks,
Ravi -
How to show row data to vertical data(columns) please
Good Morning,
Could you please help with this
I have a table with following two columns
TechName Version
SQLServer 2000
SQLServer 2003
SQLServer 2005
SQLServer 2008
SQLServer 2008R2
Oracle 11G
MSOffice 2000
MSOffice 2003
MSOffice 2007
MSOffice 2010
How can i show version column this data as vertical component 1 to 5
TechName Component1 Component2 Component3 Component4 Component5
SqlServer 2000 2003 2005
2008 2008R2
Oralce 11G NULL NULL
NULL NULL
MSOffice 2000 2003 2007
2010 NULL
Please Help me with this
Thank you in Advance
AsitaThis operation is known as pivoting. The common way to pivot data (transpose rows to columns) in T-SQL is:
- Grouping (GROUP BY)
- Spreading values (CASE expression)
- Aggregating (MIN / MAX / COUNT / etc.)
Since you have different versions, depending on the value of TechName, then it will be easier if we enumerate each version per value of TechName (row_number in this case).
with C as (
select *, row_number() over(partition by TechName order by version) as rn
from T
select
TechName,
max(case when rn = 1 then Version end) as Component1,
max(case when rn = 5 then Version end) as Component5
from
C
group by
TechName;
If you are going to have more than 5 versions for specific TechName and you do not want to put a quota, then you will have to reach to dynamic sql. Search in this forum by "dynamic pivot" and you will find plenty of examples.
AMB
Some guidelines for posting questions...
AYÚDANOS A AYUDARTE, guía básica de consejos para formular preguntas -
Format % in chart label when Data Label Option is 'Show Series and % value'
I am using:
OracleBI Discoverer 10g (10.1.2.2)
Oracle Business Intelligence Discoverer Plus 10g (10.1.2.54.25)
I have a report that returns 2 columns 'Repair Status' and 'Count' The graph is a pie chart and I have selected the Data Label Option as 'Series Label and % value'. The percents displayed in the label have no consistent format. Sometimes 2 decimal places, sometimes 4 decimal places. I want the chart label to consistently display the % in the chart label with no decimal, i.e. 96%. How can I accomplish this?Hi,
Where you selected 'Select Label and % Value', there is a button at the bottom, Format Data Labels. In there, there is a Number tab where you can play around by selecting Currency, Percent, etc. Have you tried this?
Cheers.
Mahesh -
I have strucked with a simple but a complex problem.
I have a Report with data in vertical rows..need of the hour is how can we show that data into column structure.
here is the table sample which i have in Database..
Location chrg_type Effective_date
xxxxxxx xxxx xx-xx
thhis is the structure in effective date we have several months in it in a single column i want show the effective date or effective month in various columns instead of a single column.
my required table is....
Effective_date Effective_date
Location chrg_type xx-xx xx-xx
xxxxxxx xxxx xx-xx
any tough heads?????Hi Sunil,
Your 1st problem is that you are going to need one more field to accomplish you goal. What type of data do want under your new date columns?
Anyway, once you have that you need to move on to how to move the data out into columns based on date.
Try something like this.
0_Date = IF DATEPART('m',{tbl.Effective_date}) = DATEPART('m',CurrentDate) AND
DATEPART('yyyy',{tbl.Effective_date}) = DATEPART('yyyy',CurrentDate)
THEN {tbl.DataField}
1_Date = IF DATEPART('m',{tbl.Effective_date}) = DATEPART('m',DATEADD('m', -1, CurrentDate)) AND
DATEPART('yyyy',{tbl.Effective_date}) = DATEPART('yyyy',DATEADD('m', -1, CurrentDate))
THEN {tbl.DataField}
2_Date = IF DATEPART('m',{tbl.Effective_date}) = DATEPART('m',DATEADD('m', -2, CurrentDate)) AND
DATEPART('yyyy',{tbl.Effective_date}) = DATEPART('yyyy',DATEADD('m', -2, CurrentDate))
THEN {tbl.DataField}
... Repeat this process until you have all of the columns you need, following this format.
Hope this works for you,
Jason -
Unable to change Data label position in the Chart using Position from Properties
Hi All,
I am trying add the Data label to the chart and the users want them to appear on the top of the stacked bars. By default when I enabled the data labels it showed up in the middle. When I tried to change the position by doing
View --> Properties --> Position --> Top/Bottom/any of other 8 options -- it does move a bit
I even tried deleting chart and recreating it.
What am I missing? Thanks in advance.Hi Ranjith_SQL,
According to your description that you have add the Data label on your stacked column chart which by default display in the middle of the chart, you want them to appear on the top of the stacked column chart, right?
For a Stacked Column Chart, the data labels are always placed in the center of the Series bars. This is by design. I also test it on my new version of SSRS 2014 and find have the same result.
If you really need the data label to display on the top, I recommend you to change the chart type to column chart which by default have the Data labels display at the top of the column:
You can also submit an wish at
https://connect.microsoft.com/SQLServer/
If the suggestion mentioned by customers for many times, the product team may consider to add the feature in the next SQL Server version. Your feedback is valuable for us to improve our products and increase the level of service provided.
Thanks for your understanding.
Regards
Vicky Liu -
Not able to use more than 5 data labels for chart in Oracle BI Publisher
I am currently working in Oracle BI Publisher 10.1.3.4.1 .
I created data template and rtf template.Uploaded data successfully and was able to generate a chart also.
But now the problem is that my output is having 14 columns and BI publisher chart is giving only 5 data labels to include.Please let me know how i can add more data labels to be included in the chart.
Im trying with Bar-Vertical-Stacked chart.Inorder to add more labels using corresponding tags
<RowLabels>
<label>
<xsl:value-of select="element name"/>
</label>
</RowLabels>
<ColLabels>
<label>
<xsl:value-of select="element name"/>
</label>
</ColLabels>
To Know more follow the link
http://www.oracle.com/technetwork/middleware/reports/graph-dtd-technote-2-094743.html#LocalGridData
Thanks
Shyam
Maybe you are looking for
-
To change the colour of a section, but leave the rest as it is
Is this possible? I need to change a colour of a moving object, but keep everything else as it is, are there any ways of doing this on FCP? If advice is in colour, please give detailed instructions as I have it, but am yet to use it. Many thanks Mart
-
Customer receivables Aging report was changed
When try to generate the SAP Standard Report Customer Receivables Aging, supprised to see that the column has been changed. The first column was the Future Remit, second column is the 0-30 aging, third column is Customer name. I chcek if the Form set
-
RMI: Unknown source problem with connection & security
When I try to run the RMI server code, after I have granted all permissions in my policy, after compiling through RMIC generating my stub and skeleton classes, and finally after running the RMI registry, I receive an error. The error that I have been
-
Include complete version numbering in error messages.
This submission to the Adobe FrameMaker Forum -- http://www.adobeforums.com/webx/.59b61efd -- illustrates FrameMaker's ability to output rather lengthy (albeit not especially human-friendly) error messages. Why not supplement those error messages wit
-
Is there a certain trial version of Dreamweaver to download for Macs? I keep seeing trouble shooting questions for Macs so is there a way to bypass that by downloading the "correct" version?