Show finance charges on the customer statement?

Hi all,
Can somebody guide me on how to assess finance charges. The client wants the system to generate a monthly finance charges that should highlight to a G/L account. When a customer statement is printed, the statement should show the total finance charges imposed for a particular period. The client wants to assess or impose finance charges of about 5% at the begining of every month. Can somebody please guide me where to do the necessary configurations with this?
Thank you,
SONY

Hi,
Follow the following steps
Financial Accounting> Accounts Receivable and Accounts Payable> Business Transactions> Interest Calculation
Interest Calculation Global Settings>
Define Interest Calculation Types
Give the Interest Indicator (your choice)
Select the interest cal. Type as Intem Interest Calculation
Define Number Ranges for Interest Forms
Define the number range here with internal numbering
Prepare Item Interest Calculation
New entries>
Check Open Items Check Box
Check radio buttons as required
Ref. Date-4
Calendar type-G
Factory Calendar ID-select your factory calander
Check box Post Interest
Save your entries
Define Reference Interest Rates
Ref.int.rate- Give the Code
Long text-
Date from- Effective Date of the interest
Currency
Save your entry
Define Time-Based Terms
Int.calc.indicator-Give your indicator
Currency Key
Eff. From- Date
Sequential number-1
Term-Credit interest: arrears interest calc.
Ref. interest rate- Give the ref. rate as defined above
Save your entries
Enter Interest Values
New Entries
Select your Reference as defined above
Enter the Interest Rate
Interest Posting
Create Symbols- Create symbol for interest received
Save your entry
Create- Posting Specifications “ Click on the create symbol”
Business Transaction-1000
Enter the Debit and Credit Posting Key and the account symbol as created: Interest Receivd
Accounts
Chart of Accounts
Select Account Symbol for Interest Received
Currency-
GL Account- “Give the Account for interest received”-Revenue account
Your Configuration is complete here.
Now mention this interest indicator in your Customr account.

Similar Messages

  • Setup for a customer and print a statement showing Finance Charges

    Hi All,
    I am working on Apps R11, I want to setup Finance Charges for a Print statement. Please give me steps.
    Thanks,
    JP

    Your problem is not the interface and the form. You should care about the printing program only. You need to chage it the way there will be a part which can be looped at. Otto
    p.s.: for better understanding read here: /people/otto.gold/blog/2010/05/06/how-to-deal-with-sap-standard-adobe-forms

  • I need help! I updated the new 6.1.3 last night. Since that time my phone will not charge. The phone is plugged in and shows as charging but the battery still drains. What can I do? I need help!

    I need help! I updated the new 6.1.3 last night. Since that time my phone will not charge. The phone is plugged in and shows as charging but the battery still drains. What can I do? I need help!

    Restore iPhone with iTunes on your computer.

  • Pls explain wheather excise should be charged to the customer or not.

    Dear Gurus,
    If we are raising a Price Debit Memo request on a customer .
    what should be the Excise Implication.
    Pls explain wheather excise should be charged to the customer or not.
    Regrds
    Mahesh

    hi
    u raised the demo memo request that excise is applicable. and customer should the pay the excise amount to the company.
    Because A material 100rupees.but some mistaken happened
    A material raised billing for 10 rupees.for this 10 rupees already customer to the company.
    again one process is called as debit note.surely excise amount to the company.

  • So frustrated with Droid Charge and the Customer Service

    Going to receive my 5th Droid Charge tomorrow!  Phone drops calls, phone shuts down when taking pictures, battery last for 2 hrs and there are no batteries in stock.  The CSR told  me to go to Amazon and order on and then Verizon will reimburse me...yeah, right!  Or they will give me a Thunderbolt which I checked out after I got off of the phone and it doesn't sound any better.  Can't understand why I have to settle for a phone that doesn't work most of the time.  I have never been late on paying my bill and expect better quality and service than I am receiving.
    No real recourse...take it or leave it attitude when speaking to ALL Verizon employees!  They say they care but the service doesn't reflect their words.  Been a customer for over 17 years and hate to move to another company and sure don't feel I should have to pay to get out of a contract on a phone that I have to shut down and bring up again when I need to make a call or send a text.  SO FRUSTRATED!!!!!!!

    We have two droid charge phones that we got in April on Amazon.  We are trying to troubleshoot with Samsung and getting not much help.  Phone dies quickly at times, but not other times.  It consistently shuts off when taking pictures, though, on both phones.  It is clear to us that the phone has a problem because we have two.  I've seen two work-arounds.  One is getting a bigger battery that requires a new larger phone back.  The other is to put the phone in Airplane Mode.  Apparently, this problem is due to a "power load" issue.  So, the phones are inherently defective. 
    We likes the phones and at times we have fooled into thinking they are working fine... because at times the camera works fine. We haven't had any replacement phones because it seems that so many have this issue and therefore, what is the point.  We would like to know if other Droid Charge cameras don't have this issue because we expect to be able to use the camera.  We have 3 little boys and we already have lost pictures from the last day of school because we counted on this phone.  Sounds like a small problem until you look at it that way. 
    Really wish Amazon, Verizon or Samsung could get us a good solution.

  • Assess finance charges on Customer statement - MYSTERY Un-Resolved

    Hi all,
    This is the 5th time I am requesting somebody to help me on displaying finance charges on customer's monthly statement. Can somebody pls guide me on the various t.codes to show finance charges (interest rate) levied on a customer's monthly financial statement.
    Pls folks, help me with this. Its been more than a week I have been posing this question on this forum for which I haven't got any solution yet.
    Thank you,
    SONY
    (Please do not worry of your reward, i will surely assign points for every kind of helpful answer)

    Hi,
    Follow the following steps
    Financial Accounting> Accounts Receivable and Accounts Payable> Business Transactions> Interest Calculation
    Interest Calculation Global Settings>
    Define Interest Calculation Types
    Give the Interest Indicator (your choice)
    Select the interest cal. Type as Intem Interest Calculation
    Define Number Ranges for Interest Forms
    Define the number range here with internal numbering
    Prepare Item Interest Calculation
    New entries>
    Check Open Items Check Box
    Check radio buttons as required
    Ref. Date-4
    Calendar type-G
    Factory Calendar ID-select your factory calander
    Check box Post Interest
    Save your entries
    Define Reference Interest Rates
    Ref.int.rate- Give the Code
    Long text-
    Date from- Effective Date of the interest
    Currency
    Save your entry
    Define Time-Based Terms
    Int.calc.indicator-Give your indicator
    Currency Key
    Eff. From- Date
    Sequential number-1
    Term-Credit interest: arrears interest calc.
    Ref. interest rate- Give the ref. rate as defined above
    Save your entries
    Enter Interest Values
    New Entries
    Select your Reference as defined above
    Enter the Interest Rate
    Interest Posting
    Create Symbols- Create symbol for interest received
    Save your entry
    Create- Posting Specifications “ Click on the create symbol”
    Business Transaction-1000
    Enter the Debit and Credit Posting Key and the account symbol as created: Interest Receivd
    Accounts
    Chart of Accounts
    Select Account Symbol for Interest Received
    Currency-
    GL Account- “Give the Account for interest received”-Revenue account
    Your Configuration is complete here.
    Now mention this interest indicator in your Customr account.

  • AR - Customer Statement - differences when compared with the Aging report

    I am running the customer statement (the Print Statement program) 'as of date' say 11-Jun-09, and found that the 'Total Amount Due' for a customer is not agreeing back to the balance displayed on the Aging Screen (Navigation: Collections -> Customer Accounts [Aging butto]) for the customer.
    The 'Total Amount Due' on the statement is greater than the balance on the aging report/screen.
    It appears that the statement is selecting more receivables transactions (invoices, credit note, payments etc...) than the aging report is looking at. Also the aging buckets on the statement does not tie back to that on the aging screen /report for example the '4 Bucket Aging Report'.
    My questions are:
    1, Is it possible for the 'Total Amout Due' on the statement to differ from the balance on the aging report/screen?
    2, What factors or reasons might cause the above senario to occur?
    3, How can one start to investigate this in order to account for such differences?
    Ideally what I would like to do is run a sql script that will show what is being selected for the statement 'as of' a particular date for a customer, and another sql that will show the same customer account balance and aging buckets at the same 'as of' date.
    And perhaps another sql that would show the same customer open receivable transactions.
    Thanks.

    Hello.
    This query will show you the customer open receivable transactions:
    select c.customer_name,
    decode(ps.class, 'PMT', 'Payment', 'INV', 'Invoice', 'DM', 'Debit Memo', 'CM', 'Credit Memo') Type,
    ps.trx_number,
    ps.trx_date "Inv Date",
    ps.due_date "Due Date",
    ps.acctd_amount_due_remaining "Amount Remaining"
    from ar_payment_schedules_all ps,
    ra_customers c
    where c.customer_id = ps.customer_id
    and ps.status = 'OP'
    and ps.org_id = &orgID
    and c.customer_number = &CustNumber
    Octavio

  • Customer statements - Email & print at the same time - Is this possible?

    Hi all,
    We generate customer statements at regular intervals and send them to the customers, through mail, fax and email.
    We have a print program which generates the customer statement. For some customers we want the statements to be printed as well as sent by e-mail simultaneously.
    Can anyone please let me know which field, can we use to tell the system to look at if it has to only print / email / email & print.
    We thought of using Bank statement field in the correspondence tab (KNB1-XAUSZ).
    We created 4 values,
    A - print
    B - Email
    C - print & email
    D - Fax
    However when we use 'C' the print program only sends the email, without printing.
    Can anyone please let me know if I am using the wrong field? Is there any other field that can be used for our requirement.
    Thanks in advance.
    Krishna

    Hi,
    I know it is an old thread. Just to add to what Eduardo explained here, Answer for your question is, yes it is possible to control it through the selection- screen. No need for a new Z-program for this. Even if you check the OSS note 549119, it is only talking about controlling it through master data if you check the mentioned include LXFKOF01(whether Email id maintained or not)
    What we have done is, we have controlled the same through correspondence types. We copied the existing ones into new ones starting with E*. For example: SAP01 to EAP01 to denote that these are all for emails. And we check the correspondence type in BTE 2310 which is available in parameter I_BKORM-EVENT. Based on that, you either set FINAA-NACHA      = 'I' (Email) or FINAA-NACHA      = '1' (Print) or even you can include fax as well.(FINAA-NACHA      = '2').
    If you have some hard coded stuff in your forms, what you can do is, you can reset the correspondence type back to SAP01 from EAP01 by using field symbols , by changing '(RFKORD10_PDF)BKORM-EVENT'.  Make sure you use correct print program in place of RFKORD10_PDF.
    So when you run F.27 or F.62 with SAP01, it will mass print and when your run the same with EAP01, it will mass email.
    With regards,
    Gokul

  • Importing Crystal Report layout for customer statements

    Hello,
    I have imported a crystal report layout to use for the customer statements when running them from the ageing report.  The problem is even if we only select one business partner in the ageing report, when we print preview the statement it displays statements for all business partners - this is because in the crystal report there are no parameters.  I know that when you import a layout like this for other documents you need to use for example, {ORDR.DocEntry}={DocKey@} as the parameter however the customer statements don't have a docentry.  When I look at the system statement layout (collection layout), when you run the report you get an ADO.NET (XML) connection prompt.  Is it possible to use the crystal layout i have for the customer statements but for only the customer(s) showing on the ageing report?
    Many thanks,
    Kate

    So just to make it clear,
    you want an overview of open invoices from 1 customer.
    If so, try this in crystal reports :
    Create a parameter field (field explorer)
    Name : CardName
    Type : String
    Value : Static
    do not select a value field (none)
    press ok.
    Select expert
    Create new
    Starts with
    type this : {?CardName}
    press add
    Click formula editor and make it look like this :
    {OINV.DocStatus} = "o" and
    {OINV.CardName} startswith {?CardName}

  • Aging in Customer Statement

    When running the customer statement report and choosing a date range of transactions to show, the system displays an opening balance and a closing balance which are correctly calculated. It does not, however, include the aging of the opening balance in the aging section of the satatement.
    While it is correct to show just those transactions in the date range
    chosen, in the statement of account to your customer, you want to show
    the aging of the entire balance, not just the transactions shown on the
    statement.
    There are two main methods of producing statements for customers, one
    is called "open items"; which shows all open invoices, credits and
    payments for a customer. In SAP B1 this method can be produced
    effectively.
    The other is "Balance Forward"; which shows an opening balance and the
    movement for the current period only. This method cannot be produced
    from SAP B1 and requires an additional, Crystal report to be added in for
    the users.
    For our customers using the SAP Business One system, the split for
    customers using each type would be around half using each method.
    This is missing functionality, which, if available, would make
    implementations smoother and have customers less reliant on add ons to
    do normal functions, and would have partners less reliant on additional
    skills required to write the Crystal reports required.

    Closed so I can open a new one

  • Customer Statement Report converted from PLD to CR - extra datasource issue

    Hi All,
    We've come across an issue where we have used the Crystal Converter to convert a PLD layout of the Customer Statement (Collection) Report to a CR layout (done via CR 2008 using the 8.8 standard integration).
    The layout converted fine and we've got most standard fields working and showing the correct values etc. However we had a requirement to also bring in the Original Document Amount into the layout (which is not a standard PLD field unfortunately!) and we had to do it via an extra datasource based on a pretty straightforward view we created in that company database - which contained columns CardCode, DocName (which was the transaction type + number e.g. IN 12345) and of course, DocTotal.
    We then added the datasource (via ADO connection) and linked the DocName to the Reference field that is already present in the standard layout and contains the same data as our cutom DocTotal - and remarkably, this actually produced the correct results - i.e. we managed to get the Original Document Amount to appear in the lines of the statement together with the open invoice balance, reference, posting date, due date etc - however this seems to affect the other areas of the layout - and we lose the header and footer information completely; whilst retaining only the lines level information.
    We've tried a few things such as linking the CardCode to a header field as well but it doesn't seem to bring the rest of the layout back. So in a nutshell, as soon as we bring that extra field in from the added datasource, we get the correct original document amount appearing in the lines but that's all we see in a print preview - the line level data of the statement. The header and footer information disappears.
    And here is the big question - any thoughts on this and has anybody experienced a similar problem in an integrated CR? We think it may possibly be due to the extra datasource - perhaps the 8.8 - CR integration doesn't know how to handle the additional datasource AND it's own standard datasource (which is referencing the PLD fields) properly yet?
    Thoughts please because I'm sure this will turn into a common issue sometime soon.
    Edited by: Mohsen Qureshi on Jul 2, 2010 11:04 AM

    Hi Mohsen,
    Perhaps you are able to help me.
    I have successfully converted the SAP system 'Customer Collection Report (One Page per Customer)' PLD into Crystal using the Crystal converter. I now run my customer ageing report in SAP, however, when i print preview the Crystal layout, the "detail" section of the report repeatedly displays the "text" label of each field. I'm assuming this is because the system PLD for the collection report, does not use database fields for the detail/repetetive area - instead it uses text fields to pull through fields such as document no etc etc.
    I would have throught that a crystal conversion from an untouched system layout would have worked, but it hasn't.
    My question - Did you have to perform any additional work to the crystal report after the conversion?
    Any suggestions or tips on how to get the system  would be greatly appreciated.
    Thanks in advance,
    George Kantzavelos

  • Customer Statement - PLD - Prior Period Balance

    When one uses the standard Customer Statement, the prior period balance shows up. It is a field defined as TEXT field, Free Text and the text value is 9999999999.
    When I copied (save as) this standard customer statement, the prior period balance no longer shows up. Further more, if I copy this field from the customer statement (F_033) to my new copy it doesn't work and if I manually create a new field it doesn't work either on the new statement.
    How does one get a prior period balance to show when the field is a text field and not a formula field.
    Any help would be greatly appreciated.

    Hi Marli,
    This is the norm of B1. Your client should be able to get used to it soon.
    Thanks,
    Gordon

  • Customer statement report 2007 A PL37

    Good day
    I need to do a layout on PLD on the customer statement report for a client, but they do not want a full record of debits and credits to show on this statement. They only want the open and unreconciled transactions to show. How do I achieve this in the PLD?
    Regards

    Izak,
    Please see this link with respect to reporting questions ...
    All about Printing & Reporting using ALD, PLD, XLR and Crystal Reports
    Eddy

  • Customer Statement Modification

    Using 2007A, I want to add BP Ref no to the repetitive area of the Customer Statement (AGE30001) but when I went into PLD it was already there as a free text field.  In fact all of the fields on that line are defined as free text.  They are not headings but real data fields.  So I have 2 questions, how does it work if they are defined as text fields?  and how do I add a data field from OINV when that table does not show as an option when I try to add a database field?

    Hi Phyllis
    There is a known bug with the BP ref field. Try double clicking on a customer/supplier in the ageing report to get details. Then go back and print and suddenly the BP ref field does print. I know this has been logged but haven't seen a fix in any of the recent patches. Maybe search
    SAP notes and see if it has been addressed yet, if not log with SAP support.
    Kind regards
    Peter Juby

  • Customer Statement in Foreign Currency

    Hello Experts,
    Is there a way to choose the display currency on a customer statement?  For those customers who our client invoices in EUR’s or CAD, they would like to be able to print their statement in either currency or at least have both currencies displayed on the report simultaneously.  There is not much flexibility with editing the existing print layout of the customer statement since it pulls from system variables - is there a way to link these variables to the foreign currency?
    Thank you,
    Sarah Buchanan

    Hi,
    You can set the language of this BP and create a Print Layout for This language and this have to work.
    For example:
    - BP Currency       - BP Language      - Layout Currency     - Layout Language
    - USD - - - - - - - - - - English- - - - - - - - USD - - - - - - - - - - - - English
    - EUR - - - - - - - - - - Spanish - - - - - - - EUR - - - - - - - - - - - - Spanish
    - CAD - - - - - - - - - - English UK - - - - - EUR - - - - - - - - - - - - English UK
    The system is going to ask you if you want to choose the print layout for the BP language, if you don't have a layout for this language just choose no and then is going to show the default Print Layout.
    I hope this help you.
    Regards.
    Enriquillo Guigni

Maybe you are looking for