Show/Hide Reviewers in Tracked Changes in iPages

Is it possible to hide the tracked changes for one (or more) reviewer(s) while showing the tracked changes from one (or more) other reviewer(s)?

As far as I know the response is no.
You may try to mimic the feature applying the white color to comments done by one or several reviewers.
Yvan KOENIG (from FRANCE mardi 28 avril 2009 21:56:15)

Similar Messages

  • In the new version of Pages, how do I print with comments and tracked changes?

    I am using the new version of Pages, and am trying to print (either in hard copy or to a PDF) a document to which I have added comments and made tracked changes. I would like the printed (or PDF) version of the document to show the comments and tracked changes. Does anyone know whether this is possible, and, if so, how to do this?

    Try the File > Export to command. One of the formats is txt (plain text) so it might not be what you're looking for.

  • Track changes showing multiple entries for a single change?

    Hi there .. I'm using Pages '09 v4.1 to edit MS Word '97 documents. I've been using the 'track changes' feature to work on chapters in a book and have done so with no problems so far (about 6 chapters so far in separate files). I went to start the next chapter and noticed that when I make a single change such as highlighting a word and making it italic, the tracking bubbles will show up as individual entries for every letter instead of for a single word. The really annoying thing is that it's not consistent .. some whole-word changes show up as a single entry, while some show as a few entries but don't necessarily correspond to how many letters are in the word being changed. When I try deleting specific tracking bubbles to see which part of the word they correspond to, it varies. For example, if I put the word "similar" in italics on page one, paragraph one, it shows up as 2 entries. When I delete the last entry, "imilar" will go back to standard font, while "s" stays italic until I delete the other entry. It's as though the words in the document are being recognized based on something other than the obvious, and certain letters are being grouped together in the program's brain, while others are separate.
    It's not isolated to italics, btw. If I reformat the entire document to be left-aligned instead of center-aligned, it will show lots of separate tracking bubbles in various places through the document, rather than showing one bubble for my single change.
    I've tried duplicating and saving a new version of the document, as well as creating a new doc and pasting everything into that and saving as a new doc, though I wasn't sure if this would carry over the problem .. It did.
    It's not the end of the world as far as finishing this job, but it's pretty annoying and will be worse for the person who ultimately verifies the changes I've made. Any help is greatly appreciated.

    TekWarrior wrote:
    I'm part of the end user computing and we are in the process of making a consolidated tnsnames.ora file as part of our migration from Windows XP to 7.
    The following two entries are to the same host, but are named different and use different ports, we can't locate the original programmer that set it up.
    I need to know if this would cause conflicts or not?
    PYRPROD.WORLD =
      (DESCRIPTION =
        (ADDRESS_LIST =
          (ADDRESS = (PROTOCOL = TCP)(Host = [same hostname])(Port = 1521))
        (CONNECT_DATA =
          (SID = pyrp1)
    PYRP1 =
      (DESCRIPTION =
        (ADDRESS_LIST =
          (ADDRESS = (PROTOCOL = TCP)(HOST = [same hostname])(PORT = 1526))
        (CONNECT_DATA =
          (SERVICE_NAME = pyrp1)
    TekWarrior wrote:
    I'm part of the end user computing and we are in the process of making a consolidated tnsnames.ora file as part of our migration from Windows XP to 7.
    The following two entries are to the same host, but are named different and use different ports, we can't locate the original programmer that set it up.
    I need to know if this would cause conflicts or not?
    PYRPROD.WORLD =
      (DESCRIPTION =
        (ADDRESS_LIST =
          (ADDRESS = (PROTOCOL = TCP)(Host = [same hostname])(Port = 1521))
        (CONNECT_DATA =
          (SID = pyrp1)
    PYRP1 =
      (DESCRIPTION =
        (ADDRESS_LIST =
          (ADDRESS = (PROTOCOL = TCP)(HOST = [same hostname])(PORT = 1526))
        (CONNECT_DATA =
          (SERVICE_NAME = pyrp1)
    It  won't cause any problem.

  • Why do Track Changes no longer show up when document is saved as .doc?

    I've used iWork for many years to collaborate with people in numerous other organizations who almost all use MS Office and are mostly on Windows. This year, the documents I send them, supposedly saved in Office formats, cause freezes, don't open, and even when they do, don't show Track Changes any more. That makes collaboration on document creation almost impossible. Workarounds? Solutions?
    Does anyone know if Apple is going to do a real update to iWork to bring it in line with current MS Office versions? If not, I'm going to have to give up on it and that will take endless work since I'm going to have to create new templates and sample docs from scratch. Anything I convert and import from iWork causes problems and the Open Office/ Libre Office suites don't even accept iWork docs at all. I hate to go back to using Microsoft products.

    I was still on Leopard when it started this spring (I suspect it started with updates others did for MS Office). I never used Snow Leopard or Lion on my desktop. Documents sent to collaborators or cllients started not opening or freezing or being Read Only through I had not sent Read Only docs. I hoped the upgrade to iWork that was available once I bought Mountain Lion would help and it did in terms of documents opening but not for editing.
    This happens with Pages and Numbers and I'm hearing it from others, and hearing they are also having this problem with Keynote. I'm about to collaborate on a presentation for a third party webinar and suspect it won't be worth developing it in Keynote from what I'm hearing. The problems have by now happened with dozens of collaborators in different organizations, countries, etc., including people with high level tech skills, so it's definitely at my end.
    I have tried on another computer (my laptop, which had the problem during Snow Leopard and still does under Mountain Lion). as well as other accounts; that doesn't make a difference.
    Throughout I've run whatever the latest iWork version was, but the upgrades have been minimal. It appears Apple plans to let iWork die.

  • How do I track changes and show redlines on an edited pages document?

    I have legal agreements that were sent to me in Microsoft Word.  How can I track and show redline changes when I convert to a Pages document to make my edits.  The redlined changes or edits, then need to be saved back in word doc format and emailed on.
    Thanks,
    Dana

    I think the Word document has to be saved with the tracking open so you can see it when you open the document in Pages. In Pages if you don't see the tracking go View > Show Comments, You might need to also go Edit > Track changes
    More about this can you read in the Pages User Guide, downlaodable from your Pages Help menu. Chapter 4.

  • In using MS Word for mac, and using track changes, and I send a copy, the recipient cannot see the track changes, nor do they show up on the printed copies, even though I highlight show changes in print

    In using MS Word for Mac, and in using Track Changes, when I send an email with the changes, the recipient cannot see the highlighted changes, nor do the printed pages show the highlighted changes, even though I have checked "show highlighted changes"

    In using MS Word for Mac, and in using Track Changes, when I send an email with the changes, the recipient cannot see the highlighted changes, nor do the printed pages show the highlighted changes, even though I have checked "show highlighted changes"

  • How to Hide Track changes according to Specific user?

    Hello All,
         We are developing plugin and we have to hide the changes according to specific user. We are setting the track change preferences using the methods provided by ITrackChangeAppSettings interface.
         But as this interface is aggregated on kWorkspaceBoss it is applying the changes for all users.
         Will anyone please suggest how can I apply changes according to particular users? any help is appretiated.
    Thanks & Regards,
    Praveen

    Hello All,
               For hiding the tracked changes according to particular user,i have accept the changes according to specific user.But i have undo the changes it means before saving i have to undo the accepted changes.I am using VOS_RedlineObject::UndoSimpleChange() method but it is not working.
                Can anyone tell me other way for doing that?
    Thanks & Regards,
    Megha

  • Changes in detail-disclosure aren't kept over show/hide

    Dear forum,
    In a table with detail-disclosure is the filled-in data in hidden fields not kept when using the show/hide function.
    Is this is a bug in build 10.1.2 build 19? Is this solved in the new build? Or is this expected behavior?
    Is there anyone who encountered this problem or who found the solution for this?
    Your help is much appreciated.
    Arjen

    Arjen,
    This is fixed in release 10.1.2.1.
    Steven Davelaar,
    JHeadstart Team.

  • FrameMaker 8 Track Changes - Customize?

    Oh, I was so excited when FrameMaker 8 came out with track changes feature. and oh, was I disappointed when I got a trial copy and found out that I cannot find a way to customize the way those changes are displayed. It appears that deletions and insertions in FM 8 are just "system" conditional text, why would I not be able to customize it? If I want my inserted text to appear in fuchsia, I can't do it! If I only want to show insertions and hide deletions, I can't do that either. That's one thing that MS Word has over FM. Unless, I'm missing something?.........
    BTW, I'm using standard FrameMaker on Win XP Pro

    Hi,
    Does the keyboard work well when the Track changes turned off?  We may try some methods to check they are helpful:
    Delete the Word Data registry subkey
    Delete the Word Data registry subkey
    Rename the Normal.dot or Normal.dotm global template file
    Disable the Startup folder add-ins
    Delete the COM add-ins registry keys
    Repair for your Office suites in Control panel>Program and features>Office>Change>Repair
    Start Word in
    safe mode
    http://support.microsoft.com/kb/921541/en-us
    Since the program occurred after the update, please share me your Office 2013 version number (File\Account\About) and the update history list (Control Panel\All Control Panel Items\Windows Update\View update history)? We may remove it
    one by one and check if the update is causing the issue. I also will monitor if other customer encounter the issue in the forum.
    Thanks,
    George Zhao
    Forum Support
    Come back and mark the replies as answers if they help and unmark them if they provide no help.
    If you have any feedback on our support, please click "[email protected]"

  • Microsoft Word "track changes" error

    Has anyone experienced this? Someone sent me a file with changes made using the "track changes" option. The file shows those changes perfectly on a PPC Mac. But on my MBP, the changes are not visible. I've done the obvious stuff -- the option to "highlight changes on screen" is selected, but it neither highlights on the screen nor when I print it.

    What's the version of Word you are using?
    How 2 or more reviewers shared the document and review it?
    The timestamp/date is based on the reviewer's computer time, locate him and then eliminate timestamp in that document. Let the reviewer test the behavior.
    Thanks.
    Tony Chen
    TechNet Community Support

  • Change Track Change Author after Review Complete

    In a Word 2010 report, various reviewers have worked on their individual sections so track changes shows their individual names.
    Now the client wants no individual name but company initials instead.
    Can I somehow make that change from my computer? If they open the doc on their computer and make the change individually, is there a way to update that information?
    Thanks!

    You could do that with a macro, such as:
    Sub Demo()
    Application.ScreenUpdating = False
    Dim StrUser As String, StrCompany As String, i As Long, Rng As Range, RngMv As Range, bTrk As Boolean
    StrUser = Application.UserName: StrCompany = "My Company"
    Application.UserName = StrCompany
    With ActiveDocument
      On Error Resume Next
      bTrk = .TrackRevisions
      .TrackRevisions = True
      For i = 1 To .Revisions.Count
        Set Rng = .Revisions(i).Range
        With .Revisions(i)
          If .Author <> StrCompany Then
            If .Type = wdRevisionDelete Then
              .Reject
              Rng.Delete
            End If
            If .Type = wdRevisionInsert Then
              Rng.Copy
              Rng.Collapse wdCollapseEnd
              .Reject
              Rng.Paste
            End If
          End If
        End With
      Next
      For i = .Revisions.Count To 1 Step -1
        Set Rng = .Revisions(i).Range
        With .Revisions(i)
          If .Author <> StrCompany Then
            If .Type = wdRevisionMovedFrom Then
              Set RngMv = .MovedRange
              .Reject
              Rng.Cut
              RngMv.Paste
            End If
          End If
        End With
      Next
      .TrackRevisions = bTrk
    End With
    Application.UserName = StrUser
    Application.ScreenUpdating = True
    End Sub
    The above macro deals with insertions, deletions and moves. There are numerous other revision types that might also need to be dealt with - I'll leave it to your organization to code for them. Change 'My Company' to whatever name you want to use.
    Cheers
    Paul Edstein
    [MS MVP - Word]

  • Report to track changes to infotypes prior to running the  payroll interfac

    wants a report to track changes to infotypes prior to running the  payroll interface.  The attached report looks like it should work but it returns nothing.  Is there config that turns on "Track Changes": for select infotypes?  If so, can they be activated for key infotypes so this report will run?
    Name, Address, position, etc.
    Not attendance and absence ITs.

    Hi,
    IMG – Personnel Management – Personnel Admin – Tools – Revision – Set up change document:
    This node has three items:
    Infotypes to be logged
    Field Group Definitions
    Field Group Characteristics
    Using these three options you define which infotypes you wish to log, then which fields, then you define which groups of fields are to be saved. Click each link, or see the sections below:
    Infotypes to be logged
    Here you define which PA infotype numbers you require logging. Select New Entries and enter a transaction class (A for Pers Admin, B for recruitment), then enter the infotype number and save.
    Field Group Definition
    When changes are made to a logged infotype, the field contents before and after are recorded. This is the very reason for logging the infotype, but there is an overhead in performance and disk space used so it needs to be given consideration. Typically you will want to record fields that are pay relevant.
    Using the field group definition, you specify which fields you wish to record changes in. When any of the fields in the group are changed, all the fields in the group are saved. You can use an asterisk to log all the fields of the infotype but this is not recommended for space and performance, also there are many fields on an infotype that you will not be using, that will be saved also. Ideally you will pick individual fields of the infotype and enter them like so:
    The field group number is a freely defined number you allocate to the group, it will be used in the next step. For normal use, simply pick any number not already used in that infotype. All fields with the same field group number are recorded in the log, even if they have not changed.
    Click New Entries and enter the infotype number, field group number and field names that you wish to record.
    Field Group Characteristics
    When you have set up the field group numbers, use the field group characteristics to activate the logging of those fields. You can also specify a supplementary field group; this means that the contents of another field group can also be saved at the same time, even though the contents have not changed. In practise it is not used much. Simply select new entries, enter the transaction class, infotype, and in the DocFieldGr enter the number you assigned to the field names that you want to store, then enter L for Long Term Documents (short are not supported)
    The Audit Report
    To access the report showing the logged infotype changes, use the HR report tree available from various menu paths, including:
    Main Menu – Human Resources – Pers Management – Administration – Info System – Reports - Documents – Infotype change – logged changes in infotype data. (RPUAUD00).
    When you run the report, select the infotypes you require, and select and execute.
    Cheers
    Prasanth

  • My left shift key on Macbook Pro Retina (15") is behaving like the F11 key (show/hide open windows).  The key behaves the same for the laptop keyboard and for an external Apple keyboard?  This just started in last week after 6 months of use

    My left shift key on Macbook Pro Retina (15") is behaving like the F11 key (show/hide open windows). 
    The left shift key behaves the same on the laptop keyboard and on an external Apple keyboard. 
    This just started in last week after 6 months of use.  The right shift key and other keys on the keyboard all appear to work correctly.
    Suggestions greatly appreciated.

    I have a solution to this issue now after a discussion with Apple Support.  Some where in the last few weeks, there was a change in the key that would do a Show Desktop under the Mission Control settings in the System Preferences.  Even though the key sequence that was shown for the Show Desktop setting did not include the Left SHift key, by changing this first to having no key sequence and applying that and then changing it back to the F11 key, the Left SHift key issue that I was having has cleared up.
    A second issue that was uncovered was that the SSD had some issues (uncovered when I ran Disk Utility using the Repair Disk key).  I had to restart and use the Disk Utility through the Command R sequence to get to the stand alone Disk Utility.  The SSD appears to be running better as a result as well.
    Hope that this is of use to someone else in the future.

  • Is there a way to retain the track changes from a Microsoft Word document when working on a IPAD word processing App?

    I am going on a work trip and want to be able to collaborate with my colleagues, almost all of whom will be using Microsoft Word on Microsoft Windows laptops and I want to draft and collaborate on documents.  The approach we always take to such collaboration is to use the track changes feature in Microsoft Word that shows changes and who made the changes.As best I could tell apples Pages software ignores the notations added by the track changes features and accepts all changes to the document making it difficult to see what changes were made and by whom.
    I would appreciate any suggestions to address this challenge.

    I noted from some similar topics that Pages seems to support track changes but that while it reflects deletions made in Microsoft Word, it does not appear to show them -- is there a way to fix this problem?

  • Robo v9 Show/Hide without Twisties - One button no longer working

    Hey there, as stated I am using Robo v9 with Show/Hide without Twisties (One button) with javascipts.  We have most of our images using DHTML drop-downs and when folks click on "Show All Images" on the page, the GIF changes to "Hide All Images" and all drop-downs (our images) and expanding text are diaplayed.
    It had been working all the time, but now it only works when I right click the topic in the TOC and choose "Edit Topic", then while in the Edit Window (Display view), when I do a View (Ctrl-W) and it displays the page within RoboHelp..I can click the "Show All Images" and it works like it always had.  BUT, if that page is not in the Edit Window, and I right click "Preview Topic", the click "Show All Images" (or on the DHTML dropdown itself) it will NOT show the images, *but the GIF image does properly toggle to "Hide All Images" (and if I do again, then it properly toggles to the "Show All Images" GIF, if I do it again), but now NO images are getting displayed for some reason.  It also NEVER works properly when I publish to our website (even when clicking the DHTML dropdown itself), but the GIF images toggle properly.
    If I right click and choose "Preview Topic" and click "View With" and use Internet Explorer 8 it still never works anymore, unless the topic is in the Edit Window (Display View), so I know the issue is not on the server.  It stops working after I do a generate and run on my pc.  Also when I view it IE8 within Robo (and Allow the Blocked Content to run the scripts), many instances of the same error is shown as:
    Message: Access is denied. 
    Line: 2646
    Char: 3
    Code: 0
    URI: file:///D:/Users/_RBH9_TPO-Generate/v9-testing/ehlpdhtm.js
    ...but I *do* have access to the folder system, but in checking the coding of the ehlpdhtm.js, that area show, where I believe line 2646, character 3 starts at the "values = getAttribute(element, prop );" line below...but maybe something does not exist:
    ==
      //End HTML code invoked function
    function InitEffect( element, prop )
    var values = null;
    if( getAttribute(element,prop)) 
      values = getAttribute(element, prop );
    else if( getAttribute( element, "currentStyle" )  && element.currentStyle.getAttribute)
      values = element.currentStyle.getAttribute( prop );
    else  if (element.style.getAttribute)
      values = element.style.getAttribute( prop );
    if( !values )
      return;
    var functions = new Array();
    ==
    I have a much older backup when restored, it all works properly again in all cases, but I have done so much work since then that I think would need to be manually redone.  I have played with keeping those some javascipts alone (in case I changed something) and updated the rest of the data files I had added, deleted the .CPD file, but it somehow stops working again, probably with some updated file.  I am not sure what specific files could be causing the negative impact that is preventing it from working.  Maybe if I knew what files could impact, I couldrestore those from my old backup.  The newer backups when restored do not work properly, so there was a point in time where something changed and is causing this.
    All prior versions of RoboHelp (v7 and v8) have always worked and still do.  I am using v9.0.1.262, as the latest version has not yet been allowed on our pcs (per security), but since my earlier backup works, I thought it may not be the issue, but wanted to tell you anyway.  ;->
    Any ideas on how I should proceed?  What files may have impact to cause it not to work anymore?  The showhide.js is the only .js to show up as a baggage file.  Also, the DHTML line does exits in each html page's code, as we are still using Robo v7 as the production software and the Show/Hide always works, and I copy them into the respective Robo v9 folders (and if new, then I copy them, then import them), otherwise the newer v7 updated pages are copied over the older v9 html files while RoboHelp is closed.
    Thanks in advance for any info you can provide!

    I may have figured out what to fix to get v9 back to working on the Show/Hide button, but not the "why?" .
    It looks to all be dealing with the Robo automatic html coding of where to locate the .js file(s)...here is a quick overview of this issue and what I did.  When I view the non-working pages within Internet Explorer 8 within Robo (and Allow the Blocked Content to run the scripts), I saw many instances of the same error is shown as this in the log, which implied since I *do* have access rights, maybe the file was just not being found.
    Message: Access is denied.
    Line: 2646
    Char: 3
    Code: 0
    URI: file:///D:/Users/_RBH9_TPO-Generate/v9-testing/ehlpdhtm.js
    OK, here are my findings.  EXAMPLE #1 and EXAMPLE #2 below are excerpts of the same file.  EXAMPLE #1 is from Robo v7 and is copied to the v9 folder after it was updated so our soon to be "production" webhelp will be from Robo v9 (instead of making the same manual updates in Robo v9 as in Robo v7, I copy the updated the .html file to the Robo v9 file system).  Note the direction of the directory slashes of the java scripts listed below, as they are all DOS type slashes (back slashes), EXCEPT for ehlpdhtm.js as it is the ONLY one using UNIX (forward) slashes.
    EXAMPLE #1 (from Robo v7)
    ==
    <link rel="StyleSheet" href="..\..\sty-std-topic.css">
    <script type="text/javascript" language=JavaScript x-save-method=compute-relative
    src="..\..\showhide.js"></script>
    </head>
    <body>
    <robohelp><script type="text/javascript" language=JavaScript1.2 src="../../ehlpdhtm.js"
    x-save-method=compute-relative></script>
    <script type="text/javascript" language=JavaScript1.2>
    <!--
    if( typeof( InitEffects ) != 'function' ) InitEffects = new Function();if( typeof( InitTrigger ) != 'function' ) InitTrigger = new Function();if( typeof( FilePopupInit ) != 'function' ) FilePopupInit = new Function();if( typeof( TextPopupInit ) != 'function' ) TextPopupInit = new Function();
    //-->
    </script>
    ==
    EXAMPLE #2(from Robo v9)
    This is from the restored backup of the Robo v9 files that always work when I restore them, and note they are ALL UNIX (forward) slashes.  These backup files were generated from Importing/Upgrading a copy of the Robo v7 files into Robo v9.
    ++
    <title>[Endpoint Protection] Symantec Overview</title>
    <link rel="StyleSheet" href="../../sty-std-topic.css" type="text/css" />
    <script type="text/javascript" language="JavaScript" src="../../showhide.js">
    </script>
    </head>
    <body>
    <?rh-script_start ?><script src="../../ehlpdhtm.js" type="text/javascript" language="JavaScript1.2">
    </script><?rh-script_end ?>
    ++
    Additional info: The following is from another file from the Robo v9 backup files that always WORK and once again they are ALL UNIX (forward) slashes. 
    ~~
    <link rel="StyleSheet" href="../../sty-std-topic.css" type="text/css" />
    <script type="text/javascript" language="JavaScript" src="../../showhide.js">
    </script>
    </head>
    <body>
    <?rh-script_start ?><script src="../../ehlpdhtm.js" type="text/javascript" language="JavaScript1.2">
    </script><?rh-script_end ?>
    ~~
    BUT since all .js files are referenced in EXAMPLE #1 have DOS slashes (back slashes), EXCEPT for the ehlpdhtm.js, I decided to change the line in ehlpdhtm.js FROM src="../../ehlpdhtm.js" TO src="..\..\ehlpdhtm.js" and IT (this one page) BEGAN WORKING AGAIN after I published.  So having all DOS back slashes DOES work in Robo v9!!!!  BUT it appears that Robo v9 only generates new pages using UNIX (forward) slashes in ALL coding.  I've read about issues like this occurring with the FireFox browser, but we only use IE8, and have not read anything like this related to IE8 issues. 
    So if all UNIX forward slashes and all DOS back slashes can work in Robo v9 in finding and using ehlpdhtm.js, (the Show/Hide buttons function properly) why is this problem existing in Robo v9 when there are mixed "slashes" (using forward and backward)?  ...and the mixed slashes ALWAYS works in Robo v7!  They do not have to all be in the same direction in Robo v7 as it appears to have to be in the newer/more advanced Robo v9.  Why does it matter that all slashes need to be all the same direction, if Robo v9 CAN actually read and figure out the DOS back slashes (formatted by Robo v7 creation) and actually generates UNIX forward slashes for the .js files in new Robo v9 output within the .html?
    More importantly will I have to always do a Global search and replace in Robo v9 to change the direction of the "back slashes" when I copy updated Robo v7 .html files into the Robo v9 folders (instead of manually reworking each change), while in transition from v7 to v9?
    Thanks in advance any information, recommendations, and feedback as your time is greatly appreciated!

Maybe you are looking for