Show Values option is disabled for Stacked Horizontal 3D Chart

Hi,
I am trying to display some data using Stacked Horizontal 3D chart. However I dont want to show the values on the chart.
Though I could find a "Show Values" checkbox in chart attributes section, this options is always disabled and unchecked. Though its unchecked, the values are always displayed on this chart.
The sample page I am talking about is hosted at http://apex.oracle.com/pls/otn/f?p=26556:2:72035498235854:::::
I don't want to show the text on chart bars.
Can any one help with this?
Thanks & Regards,
Harish

Hi Harish,
I think that it is ignoring any setting relating to the "Name" properties of a chart bar/column. According to [http://3.anychart.com/products/docs/anychart/index.htm] you should be able to switch these off (set Use Custom XML to Yes to play with these settings). You should also be able to switch off the "Value" property as well, but the only thing that seems to work is to add a prefix/postfix string around it - otherwise, you can not adjust the setting at all :(
Andy

Similar Messages

Need to show a data in weeks for stacked column

I need to show the data broken down in weeks if you choose the start date and end date. I have to show in a stacked column chart. I am trying to show the values if you choose for example last month i need to show it by weeks for example
week user name total approved first approved last aprovedDate totalitemsAdded
week 1 XYZ 3 10/01/2012 10/05/2012 5
week2 XYZ 5 etc etc
etc
week 3
Below is the code and the result i am getting now .
Current Results
UserName TotalApproved
FirstApprovedDate LastApprovedDate
TotalItemsAdded
XYZ 9
2011-11-19 16:56:49.960
2011-11-19 18:18:20.783
2
DECLARE @StartDate DATETIME
DECLARE @EndDate DATETIME
SET @StartDate = '10/1/2012 '
SET @EndDate = '10/31/2012'
;with Items as(
SELECT
UserName = Profile.Description,
TotalItems = COUNT(TransactionID),
FirstAddedDate = MIN(UTCDate),
LastAddedDate = MAX(UTCDate)
FROM Transactiondatabase.dbo.transaction
JOIN Biography.dbo.Profile ON transaction.ProfileId = Profile.ProfileID
WHERE
Data like '%ItemAdded%'
AND UTCDate BETWEEN @StartDate AND DATEADD(dd,1,@EndDate)
GROUP BY
Profile.Description
Approved as
SELECT
UserName = Profile.Description,
TotalApproved = COUNT(TransactionID),
FirstApprovedDate = MIN(UTCDate),--Demo
LastApprovedDate = MAX(UTCDate)
FROM Transactiondatabase..transaction
JOIN Biography.dbo.Profile ON transaction.ProfileId = Profile.ProfileID
WHERE
Data like '%Approved%'
AND UTCDate BETWEEN @StartDate AND DATEADD(dd,1,@EndDate)
GROUP BY
Profile.Description
Select Distinct Approved.*, TotalItemssAdded = sum(distinct Items.TotalItems)
from Items, Approved
Group by Approved.UserName, Approved.FirstApprovedDate, Approved.LastApprovedDate, Approved.TotalApproved
using ssrs 2005

Hi Sunny04,
If I understand correctly, you want to display the data by weeks in a stacked column chart. If in this case, we can add a calculated field named week to display the week name, and then group it. For more details, please see the following steps:
Right-click the dataset to add a calculated field with the values below:
Name: Week
Calculated field: =DatePart(DateInterval.WeekOfYear,Fields!FirstApprovedDate.Value,0,0)
Add Week field to category group area in a stacked column chart.
Right-click Week field to open the Properties dialog box, modify the expression of Label to like this:
="week"&Fields!Week.Value
Add TotalApproved or TotalItemsAdded field to data area in the chart.
If there are any misunderstanding, please elaborate the issue for further investigation.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

FBV0 POST option is disabled for Vendor Invoice

Hi,
We have workflow intiated for Journals to post and not for customer or vendor invoice. But when i Park Vendor Invoice via FV60 and try to post it via FBV0, the POST option is disabled. No Problem with Authorizations. Please suggest a solution.

Hi Venkatesh,
Once you activate workflow for parked documents, You won't be having the option to post manually. It has to be released by authorised person. I think it can be resolved by avoiding workflow task to a particular transaction(FV60 or FV70). Please contact your workflow consultant for this.
Regards,
Prasad

Reg: Default value option - is it for value mapping????

Hi,
Recently i had seen an option of mapping a default value or error out the message when value mapping (???) doesnt fetch the conversion. I'm confused if i'm referring to value mapping or any such functionalitywhich comes as a standard pack....certainly not the options u have in recv determination. Can anyone pls enlighten on what it is exactly. I'm left clueless as i barely remember where i got to see tht option from.
Note: def not the default node in mapping too
thanks
P.S

Recently i had seen an option of mapping a default value or error out the message when value mapping (???) doesnt fetch
the conversion
Where can he find the option Map with Default value OR error-out the message ..... is it in Value Mapping or in some other functionality
Regards,
Abhishek.

Proper showing value of a column type chart in BI 7.0

Hi,
I am in BI 7.0. I created a Web template with column type chart. I want to show the column value only when users move the cursor on top of the column.
The problem is when system showing value also show the category/serious and category description. Is there any way to show value only?
Thanks for your help,
Frank

Hi Wond,
Thanks for your quick response.
Your solution is for BW 3.5 or BI 7.0? I remember with BW 3.5, WAD has chart property and option. But, I dont think BI 7.0 has chart option. I am with BI 7.0. I clicked on property and nothing happens. I dont know is my system setup issue or other. When I modify chart property, I have to use Edit -> Wizard or Refine.
Any other solution?
Regards,
Frank

Finder -- View/Show View Options Missing

I am going nutz trying to figure out why I don't have the "Show View Options" under the View menu in finder.
I did a search here and found what I thought to be the problem:
+ Re: Cant open 'Show view options' under View+
+Posted: Nov 23, 2008 11:57 AM in response to: Joey Goes +
+This is the solution if the problem is that you cannot see the Show View Options:+
+Some kind of application that you installed, even if you don't know it did it, changed a setting in the finder preference file.+
+The solution: Go to home/library/preferences and open com.apple.finder.plist, then scroll to the bottom of the file and you will see and option named: ViewOptions-inmutable, make sure the checkbox is not selected, or that the boolean value is the opposite of the one it has right now. So if it has TRUE change it to FALSE. Save the document and use the CommandOptionEscape combination to see the Force Quit Apps windows, select the finder and click the Relaunch button.+
+MacBook Pro Mac OS X (10.5)+
Unfortunately, I could not even find "ViewOption-immutable" in the file when opened in Property List Editor.
So, I created a new user to see if the problem was global, and the Show View Options was there for this use. So I copied that users finder.plist into the shared folder, logged back into my user and replaced my finder.plist with the one that was correctly displaying for the new user. Relaunched finder and still nothing.
Any ideas?

Update: I got to the office and decided to check some of the other users in the office. Sure enough, all the other users in the office have the same issue. We use Portable Home Directories as network users. So I checked the Workgroup Manager and I'm still perplexed because none of the users have any preferences being managed. Is this a bug with PHD?

Generic Object Services - View Attachments disabled for non admin user

Hi,
I am using SAP 4.7 and the attachments created using table TOA01 - archive link are visible to an administrator user through Generic Object Services toolbox while same View Attachments option appears disabled for other non admin users.
Kindly help !

Hi Neha,
I'm sorry I don't have answer to your question but I wonder if you could help me.
I'm looking at OSS note 530792 to configure GOS 'create attachment' option to copy the attachments to the archive server. currently, these are written to the SAP office tables SOC3, SOFFCONT1, etc and I want to use the archivelink and SAPHTTP and copy to the archive storage.
Have you successfully managed to configure your system since you mentioned TOA01?
In the same GOS menu I've activated the 'Business document' option and can copy these to the archive server by correctly configuring OAC2 and OAC3.
I'll really appreciate of you could please share your knowledge.
Thanks.
Soyab

IPod disabled for over 23 million minutes

When i turned my iPod on it showed that it is disabled for 23,547,746 minutes. I've tried plugging it into iTunes but it said to respond on my iPod, I can't as it's disabled. What can I do?

Disabled
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Forgot passcode or device disabled
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: Back up and restore your iOS device with iCloud or iTunes
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
If problem what happens or does not happen and when in the instructions? When you successfully get the iPod in recovery mode and connect to computer iTunes should say it found an iPod in recovery mode.

2D stacked column does not show values

Hi Friends,
I am new to Apex. I have a 2D column chart with two columns for every data point. The display value check box is checked and I can see the values on the chart. But now when i to make it a stacked 2 D column, the Show Values checkbox field gets disabled and the values does not appear on the stacked 2D column chart. I tried the same with 3S stacked column chart and even there the show values gets disabled.
Is there any way i can display the values on the chart for a stacked column? I can see the values when i hover on it in case of Stacked column chart but I need to display the values on the chart.
Kindly let me know how i can do this in Apex?

Hi Pradeep,
In earlier releases of Application Express, the supported version of AnyChart Flash charts did not fully support the display of values for Stacked charts. Therefore, the "Show Values" checkbox would be disabled on the Chart Attributes page. Since our 4.0 release, with the integration of AnyChart 5 charts, the option to display values on stacked charts is exposed via the Chart Attributes page. To take advantage of this option, along with many other charting improvements introduced with our 4.0 release, I would recommend that you upgrade to the latest version of Application Express.
Alternatively, you could switch your existing chart to use custom XML, and change the following line of code in the chart XML from:
<names show="no"/> to <names show="yes"/>For further information on customising your chart XML, please refer to the AnyChart 3 documentation: http://3.anychart.com/products/docs/anychart/index.htm.
Regards,
Hilary

Hide values in Stacked Horizontal 2D Column chart

Hello. I have created a stacked flash chart, and everything is good except one thing. The values and name of each stacked column is written within the bars of the graph. I have played with all of the variables and can't seem to remove them. I have a legend so I know what the colors are, and the values are listed on the axis, so I don't need the text on top of the actual columns. Plus, they overlap eachother. Any ideas on how to remove this?
Thanks.
Attached below is the custom XML
<?xml version = "1.0" encoding="utf-8" standalone = "yes"?>
<root>
<type>
<chart type="Stacked Horizontal 2DColumn" minimum_value="0" maximum_value="100">
<animation enabled="yes" appearance="alpha" speed="10" />
<hints enabled="no"/>
<names show="no"/>
<values show="no" prefix="" postfix="%" decimal_separator="." decimal_places="0" />
<arguments show="no" />
<column_chart column_space="3" block_space="12">
<border enabled="no" />
<block_names enabled="yes" placement="chart" position="left" >
<**font type**="Verdana" size="10" color="0x000000" />
</block_names>
<background type="gradient" rotation="1.6">
<alphas>
<alpha>100</alpha>
<alpha>100</alpha>
<alpha>100</alpha>
</alphas>
<ratios>
<ratio>0</ratio>
<ratio>120</ratio>
<ratio>0xFF</ratio>
</ratios>
</background>
</column_chart>
</chart>
<workspace>
<background enabled="yes" type="solid" color="0xffffff" alpha="0" />
<base_area enabled="no" />
<chart_area enabled="yes" x="200" y="50" width="250" height="150" deep="0">
<background enabled="no"/>
<border enabled="yes" size="1"/>
</chart_area>
<grid>
<**values lines_step**="20">
<captions>
<**font type**="Verdana" size="10" color="0x000000" />
</captions>
</values>
</grid>
</workspace>
<legend enabled="yes" x="20" y="50">
<names enabled="yes">
<**font type**="Verdana" size="10" color="0x000000" />
</names>
<values enabled="no"/>
<scroller enabled="no"/>
<header enabled="no"/>
<background alpha="0"/>
</legend>
</type>
#DATA#
</root>
*Ignore the astrix's in the code. I had to enter that so the text wasn't formatted in OTN.

I created a stacked vertical chart, and it doesn't superimpose text over the bars, which is good... but if the values exceed the axis max val that I defined, the chart changes size (which the horizontal chart doesn't do). It looks like depending on which one you choose, you simply have differing uneditable options.

Stacked 100% bar chart - Problem with datatips for zero value data points

I have a stacked 100% bar chart that shows datatips in Flex 4.   However, I don't want it to show datatips for
data points with zero values.   Flex 4 shows the datatip for a zero value data point on the left side of a bar if the data point is not the first in the series.
Here's the code that illustrates this problem.    Of particular concern is the July bar.    Because of the zero value data point problem, it's not possible to see the datatip for "aaa".
Any ideas on how we can hide/remove the datatips for zero value data points ?        Thanks.
<?xml version="1.0"?>
<s:Application
xmlns:fx="
http://ns.adobe.com/mxml/2009"xmlns:mx="
library://ns.adobe.com/flex/mx"xmlns:s="
library://ns.adobe.com/flex/spark"creationComplete="initApp()"
height="
1050" width="600">
<s:layout>
<s:VerticalLayout/>
</s:layout>
<fx:Script><![CDATA[
import mx.collections.ArrayCollection;[
Bindable]
private var yearlyData:ArrayCollection = new ArrayCollection([{month:
"Aug", a:1, b:10, c:1, d:10, e:0},{month:
"July", a:1, b:10, c:10, d:10, e:0},{month:
"June", a:10, b:10, c:10, d:10, e:0},{month:
"May", a:10, b:10, c:10, d:0, e:10},{month:
"April", a:10, b:10, c:0, d:10, e:10},{month:
"March", a:10, b:0, c:10, d:10, e:10},{month:
"February", a:0, b:10, c:10, d:10, e:10},{month:
"January", a:10, b:10, c:10, d:10, e:10}]);
private function initApp():void {}
]]>
</fx:Script>
<s:Panel title="Stacked Bar Chart - Problems with DataTips for Zero Value Items" id="panel1">
<s:layout>
<s:HorizontalLayout/>
</s:layout>
<mx:BarChart id="myChart" type="stacked"dataProvider="
{yearlyData}" showDataTips="true">
<mx:verticalAxis>
<mx:CategoryAxis categoryField="month"/>
</mx:verticalAxis>
<mx:series>
<mx:BarSeries
xField="a"displayName="
aaa"/>
<mx:BarSeries
xField="b"displayName="
bbb"/>
<mx:BarSeries
xField="c"displayName="
ccc"/>
<mx:BarSeries
xField="d"displayName="
ddd"/>
<mx:BarSeries
xField="e"displayName="
eee"/>
</mx:series>
</mx:BarChart>
<mx:Legend dataProvider="{myChart}"/>
</s:Panel>
<s:RichText width="700">
<s:br></s:br>
<s:p fontWeight="bold">The problem:</s:p>
<s:p>Datatips for zero value data points appear on left side of bar (if data point is not the first point in series).</s:p>
<s:br></s:br>
<s:p fontWeight="bold">For example:</s:p>
<s:p>1) For "June", eee = 0, mouse over the left side of the bar to see a datatip for "eee". Not good.</s:p>
<s:br></s:br>
<s:p>2) For "July", eee = 0 and aaa = 1, can't see the datatip for "aaa", instead "eee" shows. Real bad.</s:p>
<s:br></s:br>
<s:p>3) For "Feb", aaa = 0, datatip for "aaa" (first point) does not show. This is good.</s:p>
<s:br></s:br>
<s:p>4) For "Mar", bbb = 0, datatip for "bbb" shows on the left side of the bar. Not good.</s:p>
<s:br></s:br>
<s:p fontWeight="bold">Challenge:</s:p>
<s:p>How can we hide/remove datatips for zero value data points?</s:p>
<s:br></s:br>
</s:RichText></s:Application>

FYI.
Still have the issue after upgrading to the latest Flex Builder 4.0.1 with SDK 4.1.0 build 16076.
Posted this as a bug in the Adobe Flex Bug and Issue Management system.     JIRA
http://bugs.adobe.com/jira/browse/FLEXDMV-2478
Which is a clone of a similar issue with Flex 3 ...
http://bugs.adobe.com/jira/browse/FLEXDMV-1984

Trouble with Parameter Option - Show Value or Description

First off we are on BI 4.1 SP01 Patch 6. I have a Crystal Reports 2013 report with a lot of optional parameters some of which are based on dynamic lists of values which I created using Business View Manager.
My hope would be that whatever values I select would be shown in the Prompt Panel on the left side of the screen.
Rather than displaying the value of "Limited Liability Company" for the Organization Type I get the code of "06".
That is the correct code and it works from a functional perspective, but I want to see the description. To get to this point in my Crystal Report I created a parameter based on a Dynamic List of Values created in Business View Manager called OrganizationType with the following settings...
That in turn creates something in Business View Manager called "OrganizationType - Prompt Group". If I edit my Organization Type paramter in Crystal Reports I see that it is now based on that OrganizationType - Prompt Group and not Organization Type LOV I had just selected. When I look at the OrganizationType - Prompt Group in Business View Manager the Show on (Viewer) Panel and Show Value or Description options are not what I set them to be in Crystal Reports.
My expectation when choosing the "Show Description" setting for the Show Value or Description option would cause the Description to be shown in the prompt panel. Is that correct? If so, then why isn't this setting sticking. If not, how do I do that?
I realize that I could create my LOVs based on just the Description rather than the ID and Description and filter on the Description rather than the ID, but I shouldn't have to. This should work shouldn't it? What I am doing wrong?
Thanks,
Noel

I now understand that the "Show Value or Description" option will have no impact on my situation.
As you can see in my screenshots I have the "Prompt With Description Only" option set to "True". Within Crystal Report I am seeing the Description as expected in the Parameters panel...
However, when I run the report from the BI Launchpad I see the code ("06") rather than the description ("Limited Liability Company")...
Is this a bug?
Noel

How to disable/delete replace option in FDM For 11.1.2

Hi
With reference to the post below i need to confirm that "will the disabling replace option will work for FDM 11.1.2"
EXPORT: Hide replace option (essbase as target)
Thanks In Advance.
Edited by: ar_aff on Sep 26, 2011 11:17 PM

Expand Target System Adapters > FM11x-G5-E > Options > FM11X-G5-ELoadOptMethodVal > Double-click to open the option properties page
Click on "Control Properties" and you will see the Value List:
Remove the "0-Replace" option from the list and click OK

Disable auto show tool options

Hi -
I'm a new user of PE11, just upgraded from PE7. I've read in the forum where users say they've disabled Auto Show Tool Options (Keyboard Shortcuts post on 10/15/12). I would like to disable auto show but haven't been able to figure out how. Can someone please enlighten me? Sorry if this question has been asked before, but there were no results when I did a forum search for "Disable Auto Show Tool Options."
I also read in that same post that users who disabled auto show use the F4 key to open Tool Options and F5 to open Photo Bin. That leads me to believe that the window at the bottom of the screen - the one with icons for Photo Bin, Tool Options, Undo, Redo, etc - no longer appears at the bottom of the screen after auto show is disabled. But if that window doesn't disappear, then why press F4 to open Tool Options or F5 to open the Photo Bin when you can just click on the appropriate icon at the bottom of the screen?
Finally, if the window at the bottom of the screen does disappear when auto show is disabled, how does one engage Undo and Redo?
Thanks very much.

When the tool options panel is visible click the four-lined square at the far right and choose it from the menu there:

F4 not showing values for Variable

Hi Everyone,
In BEx Web analyzer, the one of variable not showing values after pressing F4 but for the same query if we execute in BEx analyzer it shows the variable values.
How we can rectify this issue for BEx Web Analyzer?
Please suggest..
Thanks
Kind Regards
Anukul

Hi,
Just check following setting are also done.
transaction RSA1 -> Query-infoprovider -> "display" -> look for the relevant infoobject -> right-mouse-click -> "provider-specific Properties" -> "Query Exec. FilterVal"
Set this option to "Master Data" and recheck the behaviour.
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/20ecb78c-374a-2d10-c6af-f024f19b785d?QuickLink=index&overridelayout=true
If above doesn't help pl check for sap note.
Thanks and regards

Show Values option is disabled for Stacked Horizontal 3D Chart

Similar Messages

Maybe you are looking for