Showing Red flag in Message Monitor

Hi All,
I am getting red flags in Message Monitor while send from SAP through RFC.
If i click the flag, showing message "Column status could not process - Transaction Execution Terminated Upon Request"
previously its worked properly. In last process we have send at a time 150 message to message listener, in that it has processed 100 messages successful and rest of them show in red flag.
After that even i send single message also, its getting red flag.
And how can we reprocess those messages
Can anyone please let me know how to solve it.
Thanks,
Kind Regards,
Praveen Reddy M
Edited by: praveen2425 on Mar 7, 2012 8:17 AM

Hi ,
I have found that error where it has been terminating.
I have kept condition action block below the sql insert query in my transaction as i am calling from Message process rule.
Under condition action block, i have kept leftside SAP jco and rightside stop action block
If the query successful execute it will trigger SAP jco, if not it will trigger stop transaction(i.e. In stop configure. link, mapped sql query success to TerminationMessage)
The issues is,
if i send 150 messages, its inserting all records in DB but in the transaction it triggering 100 messages to SAP Jco through condition after that its triggering stop action block. I don't no why its happen.
In condition i have kept
confg. object as 1 and radio button with or
Confg link as sql query success with input1 propertie
Any idea regarding this, why its triggering after sometimes even its successful executed.
Thanks,
Kind Regards,
Praveen Reddy M

Similar Messages

Snapshot agent showing red mark in replication monitor!!!(Merge replication)

few days before snapshot agent showing red mark in replication monitor without any changes...
synchronizing from publisher to subscribe working fine...
and how to clean up snapshot agent job history...
plz give me a solution...
Thanks in advance.......

error:
The replication agent has not logged a progress message in 5 minutes. This might indicate an unresponsive agent or high system activity. Verify that records are being replicated to the destination and that connections to the Subscriber, Publisher, and Distributor
are still active.
snapshot agent showing red mark...
Hi Baraiya Kirit,
According to the error message, the issue could be caused by that the agent is busy or the agent cannot log in to one of the computers in the topology.
To troubleshoot this issue, please perform the following steps. For more details, please review this article:
MSSQL_ENG020554.
• If the agent has stopped, please restart it and check if the error still occurs.
• If this error is raised frequently because the agent is busy:
You might need to redesign your application so that the agent spends less time processing.
You can increase the interval at which agent status is checked using the Job Properties dialog box.
• If an agent cannot log in to one of the computers in the topology:
We recommend that the -LoginTimeOut value be set lower than the interval at which the replication agent checkup job runs.
There is also a similar blog for your reference.
http://maginaumova.com/the-replication-agent-has-not-logged-a-progress-message-in-10-minutes/
Thanks,
Lydia Zhang

Solution Manager - EarlyWatch Alert shows red flag for managed system.

Hi Guys,
I tried to fix EarlyWatch alert report for Managed systems of QA and Dev which showed red flag on SolMan in DSWP. While trying to generate BACK RFC Destination to SolMan for QA and Dev, it messed up the EarlyWatch alert reports of Prod which was successfully working upto this point. And now the red flag appears for Prod system on SolMan in DSWP instead of two bottle sign.
As for why Dev and QA did not work, I found out it was NONE internal RFC popped whenever I tried to choose the RFC to connect to SolMan while Prod which was working fine before always showed BACK rfc. That's why I tried to fix BACK rfc for Dev and QA.
Please help me to fix these EWA problems.
Thanks,
Modena

Hi Modena,
Please see the link below for this specific issue:
http://wiki.sdn.sap.com/wiki/pages/viewpage.action?pageId=228262728

How to red flag RFC Receiver errors in SXMB_MONI?

Hi,
I have searched the forum but could not find a complete solution so am asking here.
Interface is File -> PI -> RFC to SAP
The RFC raises an exception if any errors are detected during the posting.
To check error handling I have changed the RFC in SAP to raise an exception. When testing the interface I get a chequered flag in SXMB_MONI though the Adapter Engine shows the RFC exception was raised.
How can the RFC exception be red flagged in SXMB_MONI? I do not wish to use a BPM or alerts, my preference is to red flag in the monitor.
The repository shows that the RFC has message types Response and Fault, can these be used in some way.
Che

Hi Che,
your flow is asynchronous, therefore whenever an asynchronous message is leaving PI it will be successful from a view of PI. PI cant get any information about errors inside SAP ERP.
If you want to have a error flag or an alert you need to design your flow synchronouns: File adapter works by default asysnchronous, therefore you would need to adapt it: Create a synchronous flow (never did that but could be possible) or create a BP receiving the asynchr file message and send synchr the RFC.
Regards,
Udo

System Error in Message Monitoring -Proxy to SOAP async scenario

Hi All,
My scenario is ABAP Proxy---> SAP PI 7.1 ---> WEbService(Asynchronous SOAP ).
In Moni message is showing successful Flag, but message has got stuck in "system Error" at message monitoring.I can't see any Audit log in Message monitoring .
but in related Soap Receiver communication channel i can see the below Error
"2010-08-11 09:54:15 Error SOAP: response message contains an error XIAdapter/PARSING/ADAPTER.SOAP_EXCEPTION - soap fault: Server was unable to process request. ---> Retrieving the COM class factory for component with CLSID {00226D6E-6A57-44DB-9DDC-66FDCB2869B3} failed due to the following error: 80070005.
2010-08-11 09:54:15 Information SOAP: sending a delivery error ack ...
2010-08-11 09:54:15 Information SOAP: sent a delivery error ack
2010-08-11 09:54:15 Error Adapter Framework caught exception: SOAP: response message contains an error XIAdapter/PARSING/ADAPTER.SOAP_EXCEPTION - soap fault: Server was unable to process request. ---> Retrieving the COM class factory for component with CLSID {00226D6E-6A57-44DB-9DDC-66FDCB2869B3} failed due to the following error: 80070005.
2010-08-11 09:54:15 Error Delivering the message to the application using connection SOAP_http://sap.com/xi/XI/System failed, due to: com.sap.engine.interfaces.messaging.api.exception.MessagingException: SOAP: response message contains an error XIAdapter/PARSING/ADAPTER.SOAP_EXCEPTION - soap fault: Server was unable to process request. ---> Retrieving the COM class factory for component with CLSID {00226D6E-6A57-44DB-9DDC-66FDCB2869B3} failed due to the following error: 80070005. "
Please help , what could be the problem.
Thanks in Advance.
Jyoti

Hi Jyoti,
>Is there any specific setup required at Provide side while moving to Acceptance system
I dont think so.
Please compare EXACTLY the settings of the two Comunication Channels, especially the server path. Please assure that you ve sent exactly the same message content from Acceptance system.
Regards,
Udo

BPE in RWB is showing Red LED.

Hello Experts,
In RWB --> Component Monitoring --> Display -- Business process engine is showing RED LED.The message
"Schedule background job for clearing report" is in Yellow.
In transaction swf_xi_customizing all the nodes are green under "Maintain Runtime Environment" and "Maintain Definition Environment".
I cannot change the "Schedule background job for clearing report". It gives message "Customizing Already Carried Out"
Please help.
Thanks in advance,
Regards,
Suraj

Hi Suraj,
Is this hindering the execution of your BPM. I dont think it should create any problems. I have often seen the adapter engine and integration engine showing Red LED but that does not hinder the execution of messages.
Regards,
Sarvesh

Jdbc adapter error on confirmation message in message monitor (rwb)

I have the scenario iDoc -> PI 7 - > jdbc (AS400 odbc driver).
When I do INSERT statements, the data is stored in the Database and the RWB message monitoring shows status Successfull.
However, for every insert, an other message shows up in the message monitoring with reversed Sender and Receiver (so it looks like a confirmation message is trying to find its way back to XI). This message first is is Status "Waiting", and after some time gets in Status "System Error".
As I am not expecting any responses in my XI configuration (as I have no place to send them to), I want to stop these messages showing up in the Adapter Engine (as there will be many Error Status messages that are of no interest to me).
How can I stop these messages, or what should I do in XI to process them (and dump them in my receiver determination). I have NO BPM involved .

Hi,
For each open connection a entry is made j2ee stack.So when the it reaches to max and execption is thrown.
In Jdbc adapter configuration -> advance mode -> Set -> Disconnect from the database after processing each message.
Should solve the prob
Cheers,
*RAJ*
*REWARD POINTS IF FOUND USEFULL*

System Error in Message Monitoring while it shows checked flag in SXMB_MONI

Hia,
We are working on ABAP Proxy --> SAP PI 7.1 --> SOAP (Asynchronous Scenario).
(ECC -> PI -> Legacy CRM)
I have following queries:
1. While sending messge across to Legacy system, we can see CHECKED flag in SXMB_MONI but there is System Error in Message Monitoring. When checked legacy system is unable to receive any message. Cannot understand the issue.
2. Is there any way to check in PI system whether the message has reached Legacy System other than making scneario synchronous?
Regards

System is getting connected and able to send asynchronous messages to legacy system. But getting following error while sending synchronous error:
2010-05-10 13:15:05     Information     Delivering to channel: CC_SOAP_SOReject_Out
2010-05-10 13:15:05     Information     SOAP: request message entering the adapter with user J2EE_GUEST
2010-05-10 13:15:05     Information     SOAP: completed the processing
2010-05-10 13:15:05     Information     SOAP: continuing to response message f33caa90-5c07-11df-c659-96d147c2ff0f
2010-05-10 13:15:05     Error     SOAP: response message contains an error XIAdapter/PARSING/ADAPTER.SOAP_EXCEPTION - soap fault: Server was unable to process request. ---> Object reference not set to an instance of an object.
2010-05-10 13:15:05     Error     Adapter Framework caught exception: SOAP: response message contains an error XIAdapter/PARSING/ADAPTER.SOAP_EXCEPTION - soap fault: Server was unable to process request. ---> Object reference not set to an instance of an object.
2010-05-10 13:15:05     Error     Delivering the message to the application using connection SOAP_http://sap.com/xi/XI/System failed, due to: com.sap.engine.interfaces.messaging.api.exception.MessagingException: SOAP: response message contains an error XIAdapter/PARSING/ADAPTER.SOAP_EXCEPTION - soap fault: Server was unable to process request. ---> Object reference not set to an instance of an object.. Setting message to status failed.
2010-05-10 13:15:06     Error     The message status was set to FAIL.
I have already checked Data Structure and it is fine.
Regards
In this scenarios we are using XSLT mapping using CDATA.
Please suggest solution.

In Message Monitoring Message showing Error:Message

Hi
Can anyone solve this problem.Its urgent for me.
My scenario is IDoc->XI->FILE
The file i am trying to generate is an xml file which i am dropping in XI application server using File system.
The problem is when i am going to see the message using transaction SXMB_MONI the perticular message interface is showing waiting for acknowladgement status .
But in message monitoring in runtime workbench the it is showing following status:
Adapter Engine
Holding
18.11.2005 05:42:09
CORP_SAP_DR2_030 http://limited.com/usa/sap_appl/retail/VendorsSAPAPOToMANU
MIIA_Create
BS_MANU
I am in SP14.
Also the output xml file is not getting created in the XI application server.
Please let me know the solution.
Thanks
Debraj Roy

hi debraj..
is ur mesage ie sxmb_moni in red staus or scheduled status...??
if in scheduled cud be errors with queues ...delete ur queues with tcodes : smq1 and smq2...
and also hopefully u must have configured ur idoc correctly..
https://websmp101.sap-ag.de/~form/sapnet?_SHORTKEY=01200252310000071155&_SCENARIO=01100035870000000202
regards..
vishal

Infopackage monitor shows red in details tab but green every where else

I deleted all the contents of my cube. Then I did an init load from ODS to Cube. The load shows as completed successfully (green) in both the cube (manage) and monitor header and status. But the monitor details screen shows a red in overall status. The error message it shows there is
Databasis (requests): errors occured
Has any one experienced this? I can see the records in the cube for that request, so the data is there.
There is another DSO loading this cube. The first ODS is 3.5 and the 2nd is 7.0 and uses a DTP. Do you think this has any thing to do with it?

Hello Uday,
it happenes because when the data loads happens it will check for all the request which was present in the source and you will see the list of all the request in databasis request.
I would suggest go to the request which is showing red in the list of data basis request and check that request in RSRQ or in the source and see why it has failed...if its not required to correct then you can turn the overall status to green of the loaded request and use it for reporting and it will not be an issue.
Thanks
Ajeet

TS2755 I am getting a red flag when I enter an email address for a text message from my iPad. The same email works from my iPhone.

I am getting a red flag on any email I enter when trying to submit a message. The same email address works on my iPhone.

TestnTag wrote:
When attempting to send text message from iPad I get error message "phone number not registered with iMessage REMOVE" the number is for iPhone an includes area code and country code. How do u register a number with iMessage?.
The iPad is not capable of sending an SMS message so texts, pictures, etc., must go through iMessage. The destination device must be registered with the Apple servers by turning on iMessage. Therefore, the user with the iPhone must enable it for iMessage.

I have tried to view videos created in premiere elements 10 and I get the following message: "this file type is not supported, or the required codec is not installed. When it opens there is a red screen in the monitor panel with Korean writing which als

I have tried to view videos created in premiere elements 10 and I get the following message: "this file type is not supported, or the required codec is not installed. When it opens there is a red screen in the monitor panel with Korean writing which also appears in the place of each clip in the video. I tried uninstalling and reinstalling premiere elements 10, but that did not have any effect on the video. Do you have any suggestions? I researched codec, but do not understand them at all.

gloucester
In case you did not find it, the following is a copy/paste of the Announcement on Premiere Elements 19/NVIDIA GeForce
that appears at the top of this forum.
Premiere Elements 10 NVIDIA Video Card Driver Roll Back
If you are a Premiere Elements 10 user whose Windows computer uses a NVIDIA GeForce video card and you are experiencing
Premiere Elements 10 display and/or unexplained program behavior, then your first line of troubleshooting needs to be rolling
back the video card driver version instead of assuring that it is up to date.
Since October 2013 to the present, there have been a growing number of reports about display and unexplained workflow
glitches specific to the Premiere Elements 10 user whose Windows computer has a NVIDIA GeForce video card. If this applies
to you, then the “user to user” remedy is to roll back the NVIDIA GeForce video card driver as far as is necessary to get rid of
the problems. The typical driver roll back has gone back as far as March – July 2013 in order to get a working Premiere
Elements 10. Neither NVIDIA nor Adobe has taken any corrective action in this regard to date, and none is expected moving forward.
Since October 2013, the following thread has tried to keep up with the Premiere Elements 10 NVIDIA reports
http://forums.adobe.com/thread/1317675
Older NVIDIA GeForce drivers can be found
http://www.nvidia.com/Download/Find.aspx?lang=en-us
A February 2014 overview of the situation as well as how to use the older NVIDIA GeForce drivers for the driver roll back can be found
http://atr935.blogspot.com/2014/02/pe10-nvidia-video-card-roll-back.html
ATR

In Message Monitoring Message showing holding status

Hi
Can anyone solve this problem.Its urgent for me.
My scenario is IDoc->XI->FILE
The file i am trying to generate is an xml file which i am dropping in XI application server using File system.
The problem is when i am going to see the message using transaction SXMB_MONI the perticular message interface is showing waiting for acknowladgement status .
But in message monitoring in runtime workbench the it is showing following status:
Adapter Engine
Holding
18.11.2005 05:42:09
CORP_SAP_DR2_030 http://limited.com/usa/sap_appl/retail/VendorsSAPAPOToMANU
MIIA_Create
BS_MANU
I am in SP14.
Also the output xml file is not getting created in the XI application server.
Please let me know the solution.
Thanks
Debraj Roy

Hi Debraj
HOLDING is a status which occurs normally for EOIO (Exactly Once In Order), so your message is set to Holding means some earlier message has not gone through. So until those messages are through this message will be in HOLDING state.
Have a look at this link which explains how to handle such scenarios.
http://help.sap.com/saphelp_nw04/helpdata/en/49/e3fb40ef74f823e10000000a155106/content.htm
cheers
Sameer
Assign points if it helped you

Text messages don't always send; I get a red flag message. How can I make them re-send automatically?

This drives me nuts: Occassionally, but not often, I will send a text message and it does not go through. This happens both when I am using iMessage or regular text messages. It gets me into a lot of trouble: I assume my text message has gone through, then check my phone half an hour later and realize the message has not been sent. I don't even get a vibration or a notice that it hasn't sent; it's only when I check my messages that I see the red flag but my undelivered message.
How can I get the iPhone to just automatically keep trying to re-send these messages until it goes through, or at the very least to give me a notification buzz when the message doesn't go through so I know to manually re-send it myself?

At this time that option does not exist. The only workaround that I can think of is to watch and make sure the text sends before closing the app.
You may send feedback to Apple asking for a feature using this link www.apple.com/feedback/iphone.html

Split mapping created no message-how to avoid red flag message in SXMB_MONI

Hi,
In my scenario I'm putting files in an external server with multi mapping and a condition in graphic mapping in MM, when condition is not true and no files are generated I see a red flag message in XIP MONI, "split mapping created no message".
I do not want this red flag message to come.
I see this thread:
Split mapping created.. No message exists
My problem is the same, "nikhil a " said that he solved the problem creating a dummy message in Message Mapping, but I don't know how to do that. Someone could explain to me?
I do not want to use BPM.
Thanks
Fabio Boni

when condition is not true and no files are generated I see a red flag message in XIP MONI, "split mapping created no
message".
This is correct behavior i suppose.
Check if you can verify the condition in the Receiver Determination itself so that the process will stop in the first step itself if Condition = false
Even when you say that a dummy message is created, it is to be sent somewhere or if not send then again it may give an error.
Lets see what experts have to suggest here.

Showing Red flag in Message Monitor

Similar Messages

Maybe you are looking for