Showing the {br} tag in text

Hi,
I have some text that was inserted to database via a form.
the text has chr(10) items( i mean "enter" in the end of the line).
When i present the text on the browser using a dynamic page, the "enters" aren't showed.
Is there a way to replace the "enter" with {br} html tag. maybe create a function that does the replace on a text block from the db.
Thx
Esther

sorry the html did not display properly:
you have to enclose your text between the
"(pre) & (/pre)" tag.
Note: to display it correctly in this forum I have used "(" instead of "<" & ")" instead of ">". You replace it accordingly.
null

Similar Messages

Dropped my iphone in water, it goes on, but shows the apple logo with text and goes out again, what to do?

So, I dropped my iphone into a river and picked it up very quickly, turned it out and put it in rice, after some hours I saw it was on with a blueish screen so I turned it off again and put it back in the rice, then after 6 hours in total from when it fell in the water I charge it and see the start up apple logo but then small text appears in the upper corner and it goes out again, this happened now twice, what is this and what to do?

Try the method of putting it in a bowl of rice. If the issue remains then you would need a replacement.
If you have AppleCare+ then you could get it replaced with one of your 2 incidents.
If you do not have ApplCare+ you would get a replacement as an Out of Warranty Service due to accidental damage. Now based on your country/region you could either get a replacement through postage or at an Apple Retail Store. Follow the link below for a pricing:
http://www.apple.com/support/service/
- select iphone
- select your country
- select warranty and service pricing
Choose the last option and it will give you a price based on your country and iPhone. Remember the cost shown includes a postage fee so look below the prices and how much the postage fee is as this would not be included in the cost if the replacement was done at a store.
Hope this helps

Problem: ()[]{} invisible inside the script-tag

Hi there,
This morning I realised I had some strange problem with my Dreamweaver CS4. The brackets ()[]{} are somehow invisible inside the script-tag. I know they are still there, because they execute correctly and when I copy a codefragment with some (of the now invisible) brackets to another text-editor, they are there again.
Let me give a short example:
// Brackets are visible in DW ()[]{} These are visible, tooI can see the "bla", but NOT the brackets before and after it. ()[]{} These here are visible again.
So you see, brackets are somehow made invisible inside the script-tag, and I'd like to know how to make them visible again.
Here's what I tried so far (everything without success):
- restart Dreamweaver
- restart PC
- check the options menu (didn't find anything for this problem)
- hide/show the script-tag using dreaweaver's feature for this.
Intresting point here: when the part where the brackets are, are collapsed it shows me "()[]{}[..." as a preview. So even Dreamweaver "knows" the brackets are there, but still refuses to show them -_-
- set the gui setting from "coder" to "classic" and back.
Any help is appreciated!
Thanks in advance, really need to solve this, since I am using alot of hardcoded 2-dimensional javascript arrays and therefore alot of []
Best regards
Michael

Sorry for doubleposting, I should have read the manual for posting code :|
here's the code I was giving as an example:
<title>brackets work fine here: ()[]{}</title>
<style type="text/css">
.someclass {background:url(theseBracketsAreVisible.png)}
</style>
</head>
<body>
<div>()[]{} these are visible as well</div>
<script language="javascript">()[]{}[bla]</script> I can see the "bla", but NOT the brackets before and after it.
()[]{} These here are visible again.
</body>
Sorry again..
edit:
I realised it hides words like "function" aswell o_O
<script language="javascript">
function test() {ar = new Array;ar = ["a","b","c"];alert(ar);};
</script>
The code above is visible for me in Dreamweaver like this:
<script language="javascript">
test ar = Array;ar = "a","b","c";alertar;;
</script>
really strange..

When opening the Coloursync utility and pressing the verify button, I received an error message stating that the Tag 'cprt':Text tag has an incorrect length which could not be fixed as the file is locked. Does anyone know how to rectify this?

When opening the Coloursync utility and pressing the verify button, I received an error message (copy below) stating that the Tag 'cprt':Text tag has an incorrect length which could not be fixed as the file is locked. Does anyone know how to rectify this?
Checking 25 profiles...
/Library/ColorSync/Profiles/Displays/iMac-00000610-0000-9C6C-0000-000004271B00.i cc
   Tag 'cprt': Text tag has an incorrect length.
   The file is locked. Could not be fixed.

Hi guys,
I followed the steps to unlock the .icc file in the "getinfo" screen then went on clicking repair in colorsync utility.
This is the message i got:
Searching for profiles...
Checking 17 profiles...
/Library/ColorSync/Profiles/Displays/Color LCD-00000610-0000-9CF3-0000-000004273CC0.icc
   Tag 'cprt': Text tag has an incorrect length. Fixed.
Repair done - 1 profiles fixed.
However, when i hit verify again it shows up like this:
Searching for profiles...
Checking 17 profiles...
/Library/ColorSync/Profiles/Displays/Color LCD-00000610-0000-9CF3-0000-000004273CC0.icc
   Tag 'cprt': Text tag has an incorrect length.
Verify done - found 1 bad profile.
... and it keeps like this sine die.
when i open the .icc file it shows up like this:
3     'cprt'     'text'     35     Copyright ASCII Text String
New to mac so I really don't know what to do.
I didn't get this message so far. What i did before getting this message was to open a jpeg file. I wanted to edit it so when i did right click on the file i went to open with, and colorsync came as an option; so i chose it.
Then this message started comming up.
Is there anything i can do?
Thabks for the support.

I deleted a contact, but they still show up in my text options to send. I would like to delete the contact from my texts too.

I deleted a contact, but they still show up in my text options to send. I would like to delete the contact from my texts too.

No don't restore your iphone. I've done that several times & it has never worked. -I still have deleted contacts in my iphone texts. *However if you do restore it you will not lose all your data, pics, text messages etc if you backup in iCloud. It restores back to original phone. Very nice :). Anyhowwww....
I JUST figured it out!! :))). Remove the contact from recents.
Start a text. You should see the deleted contact. All the way to the right of the name is a symbol. The symbol is a circle with "i" in the middle. Click that symbol then in red lettering click "remove from recents".

How to customize the content set in text as part of tag cq:text property="text"/

We use the tag <cq:text property="text"/> to get the content, which is set in the jcr property "text". Text was set in Richtext component and it has hyper link.
Now, we have to customize the text.
Example:-
Actual Text in 'text' property:-
<p>Click <a data-action="Hyperlink" data-upc-tooltip-type="none" href="/content/www-abc-healthcare-ch/en/offer.html">here</a> for the link</p> <p></p>
After customization in 'text' property:-
<p>Click <a data-action="Hyperlink" data-upc-tooltip-type="none" href="/content/www-abc-healthcare-ch/en/offer">here</a> for the link</p> <p></p>
i.e .html has been removed.
I tried customizing and set back to text attribute using <c:set var="text" value="<CustomizedText>" /> but even after that tag <cq:text property="text"/> retrieves the old content i.e with .html
Please suggest how to override text content, so that the tag <cq:text property="text"/> will print customized text.

Which version of cq? Is Strict Extension Check enabled at http://<host>:<port>/system/console/configMgr/com.day.cq.rewriter.linkchecker.impl.LinkCheckerTra nsformerFactory
Thanks,
Sham

Need to show the text as 2009 - 10

HI,
I am enter the fiscal year value as 2009 at the run time. how to show the text value as 2009 - 10 on the same report.
Is it possible without creating "Customer Exit" ?
Please help me ..
Thanks and Regards
Rajesh

HI ,
I created 2 text variable for 2009 - 2010. 2009 (ZYEAR1- Replacement path) is populating from the year variable (ZFY) which I resticted. For pupulating 2010 (ZYEAR2 - Customer exit) I wrote a customer exit. I checked in the customer exit it is showing 2010, but it is not populating in the variable screen...
WHEN 'ZYEAR2'.
DATA: LOC_VAR_RANGE LIKE RRRANGEEXIT.
DATA: ZNUM(4) TYPE N.
     IF I_STEP = 2.
       LOOP AT I_T_VAR_RANGE INTO LOC_VAR_RANGE WHERE VNAM = 'ZFY'.
          CLEAR L_S_RANGE.
          L_S_RANGE-LOW = LOC_VAR_RANGE-LOW(4).
          ZNUM = L_S_RANGE-LOW.
          ZNUM = ZNUM + 1.
          L_S_RANGE-HIGH = ZNUM.
          L_S_RANGE-SIGN = 'I'.
          L_S_RANGE-OPT = 'BT'.
          APPEND L_S_RANGE TO E_T_RANGE.
          EXIT.
        ENDLOOP.
     ENDIF.
I placed in the text as &ZYEAR1& - &ZYEAR2&.
Plz suggest me..
Thanks and Regards
Rajesh

How do I make dynamic text look static while the HMTL tagging is enabled?

Hi all,
I am using flash 8 with AS 2.0.
I have a dynamic text field where I am setting it's text value through a variable. Now, I need this dynamic text field content to look like static font on runtime. I tried embedding the text field but that makes my file so heavy and most importantly, it disables the HTML tagging on the text field.
Please suggest me on how to make a dynamic text field content look static on runtime while the HTML tagging is enabled and working fine.
Thanks.

I am sorry. But the attachment was not intended for what you
thought my friend.
It was there so that there are no confusions for what I mean by look of dynamic and static text fields.

The names of my contacts are not showing up when I receive text messages

The names of my contacts are not showing up when I receive text messages, only the number is showing up. How can I fix this?

This is a HUGE iOS bug.. Following a tip from another poster, I was able to fix the issue (temporarily).
This worked for me on Verizon.
I dialed *228 on my Verizon phone. I pressed "1" to activate it over the air. I then went into task manager and killed all the running apps.. Waited a few minutes.
The next text I got displayed the number correctly!.. Until I rebooted, that is.
PLEASE, call Apple and speak with a senior engineer on this. They can't fix it if they don't know it's a problem! (800) MY-IPHONE

How to use a Text View to show the current user

Hi Experts,
I am using a Text View to show the current logged on user.
Also i need to retrieve the date of creation of proposal and show it as output parameter.
I am using the following code but it is not working properly.
Please help me out regarding the same.
Method technicalDescription()
//Attribute User to store user name
IGPAttributeInfo user = output.addAttribute("USER", IGPAttributeInfo.BASE_STRING);
            user.setMultiplicity(IGPAttributeInfo.MULITIPLICITY_1_1);
//Attribute date to store current system date
IGPAttributeInfo date = output.addAttribute("DATE", IGPAttributeInfo.BASE_DATE);
            date.setMultiplicity(IGPAttributeInfo.MULITIPLICITY_1_1);
Method execute()
//getting current system date
Date currDate = new Date(System.currentTimeMillis());
          contextElement.setDate(currDate);
//Retrieve Current User Details
try {
IWDClientUser user = WDClientUser.getCurrentUser();
String firstName = user.getFirstName();
String lastName = user.getLastName();
String userName = lastName + " " + firstName;
contextElement.setUserName(userName);
} catch (WDUMException e1) {
// TODO Auto-generated catch block
e1.printStackTrace();
Method complete()
output.setAttributeValue("USER", wdContext.currentContextElement().getUserName());
output.setAttributeValue("Date", wdContext.currentContextElement().getDate());
Thanks a lot.
Cheers
Gaurav Raghav

There are a few ways, for example declare an IBOutlet for the text field and then use it with NSControl's stringValue: method (inherited by the NSTextField), or bind the value of the text field to a property, etc. What have you got so far?

How to use a Text View to show the current user in WDJ

Hi Experts,
I am using a Text View to show the current logged on user.
Also i need to retrieve the date of creation of proposal and show it as output parameter.
I am using the following code but it is not working properly.
Please help me out regarding the same.
Method technicalDescription()
//Attribute User to store user name
IGPAttributeInfo user = output.addAttribute("USER", IGPAttributeInfo.BASE_STRING);
user.setMultiplicity(IGPAttributeInfo.MULITIPLICITY_1_1);
//Attribute date to store current system date
IGPAttributeInfo date = output.addAttribute("DATE", IGPAttributeInfo.BASE_DATE);
date.setMultiplicity(IGPAttributeInfo.MULITIPLICITY_1_1);
Method execute()
//getting current system date
Date currDate = new Date(System.currentTimeMillis());
contextElement.setDate(currDate);
//Retrieve Current User Details
try {
IWDClientUser user = WDClientUser.getCurrentUser();
String firstName = user.getFirstName();
String lastName = user.getLastName();
String userName = lastName + " " + firstName;
contextElement.setUserName(userName);
} catch (WDUMException e1) {
// TODO Auto-generated catch block
e1.printStackTrace();
Method complete()
output.setAttributeValue("USER", wdContext.currentContextElement().getUserName());
output.setAttributeValue("Date", wdContext.currentContextElement().getDate());
Thanks a lot.
Cheers
Gaurav Raghav

You can use a text string as the reference.
If you use the VISA Find Resource function, it will return an array of strings which you can index in your code, and store either the index, or store the string itself. You can even use strings like COM1 and COM2, assuming those ports are available.
The challenge is when you move from one machine to another, where the serial ports may be different on the other machine.
Message Edited by LabViewGuruWannabe on 01-07-2008 06:33 AM
Message Edited by LabViewGuruWannabe on 01-07-2008 06:37 AM
Attachments:
VISA find.png ‏5 KB

When I create a text message from my contact on my iphone 5, the contacts mobile number appears and not there name. But when they respond to my text, is shows up as a new text message with there name. How do I fix this?

When I create a text message from my contact on my iphone 5, the contacts mobile number appears and not there name. But when they respond to my text, is shows up as a new text message with there name. How do I fix this?

Double click the home button and swipe up the messages app to stop it, then open the app again. This pretty much completely stops the process and freshly opens it again, resolving problems at times. I have had this happen before as well on my iPad, I get a banner, check messages, and nothing new is there.
If that doesn't work, close the app like suggested above, but then restart the phone by holding down the home and lock button for 10-15 seconds until the apple logo appears.

How to show the content of a table (long text) in a scrollable textbox?

Hi,
I have to say first, many thanks to the ones who answers to threads in this forum, it's very helpfull when we're learning web dynpro!
I have a RFC function that return a table containing a long text (node "it_text", with elements "Tdformat" and "Tdline").
1) I want first to copy all the Tdlines in a new node "text_box" (that I made specially for the screen, it contains only the element "Tdline" [the text itself]);
2) Then I want to show the content of the node "text_box" in a scrollable textbox on the screen (to show 8 lines of text, for example).
How to do that easily? What is the UI Element needed to show that?
Thanks!

If you want to display as it is then you can use Table UI element. You can change the design property to 'transparent' and set column header visibility property to none. Then you need not to write any code simple you can map the node to table field.
Even with TextEdit you can achieve what you want. Try this code...
     StringBuffer tmpBuffer = new StringBuffer();
     for(int index=0;index<wdContext.nodeLines().size();index++)
          wdContext.nodeLines().setLeadSelection(index);
          tmpBuffer.append(wdContext.currentLinesElement().getLine()+"n");
     wdContext.currentContextElement().setData(tmpBuffer.toString());
Regards
Abhilash

Show the period value in column header using Text Variable

We are using Posting Period & Financial Year to calculate YTD & MTD, for current year and previous years. These posting period and financial year characteristics are custom created characteristics we are using due to customer specific requirement.
Input values are posting period, financial year and numeric value. To calculate previous year, I need to subtract numeric value from the input financial year. Every thing is working fine up to this.
In the report I need to show the posting period and financial year values dynamically in each column header of the report for MTD, YTD for current year & previous year. I tried to achieve this using Text Variables, but I didnt succeed. If some one can give me some idea to resolve this, it would be very helpful.
I am excellent in ABAP coding. If you can specify me to code in User Exit, I can do it.
Column headers should be 08.1999 Sales Qty, 08.2008 Sales Qty, 1999 Sales Qty, 2008 Sales Qty.

Hi Abhinav,
Try using the content text variables 0T_FYEAR and 0T_FPER3, when used in the head these variable should display the year and period specified in the RKF.
e.g
&0T_FPER3&. &0T_FYEAR& Sales Qty = 08.1999 Sales Qty
If that doesnt work, try creating text replacement path variables referencing the variables you created for the year and period input. To do this click on the RKF and click on the dropdown by the yellow box next to the description on the general tab and select New Variable, enter the description, tech name and set processng by to Replacment Path, then select period as the ref. characteristic, then on the replacement path tab change replace variable with to variable and then select the variable you are using for the period input, save then hit ok, this is now a text representation of the variable your are inputing for period and can be used in the column headers, you will need to repeat the process for the fiscal year.
Hope this helps
Josh

Spry Validation-text field shows the "required" text even in initial state

Hi,
I'm having trouble with spry validation.
I insert my spry textfied and go to the properties inspector where I choose validate on "Blur" and "submit" for the Required state. I check the required box for the "required state" but the initial state will also have the "a value is required" text. If I try to delete the "a value is required" text from the initial state, the required state won't show this error.
What should I do?
Any help is much appreciated.
Thank you.

Hi, thanks so much for the reply
Well the javascript came with the spry file that I downloaded from the adobe site.
Here is my statement:
<label for="name"><span class="style87">Name:</span></label>
                  <span id="sprytextfield1">
                  <input name="name" type="text" class="textInput" id="name" />
                  <span class="textfieldRequiredMsg">A value is required.</span>                  </span></p>
              <p> <span class="style87">
                  <label for="email">Email:</label>
                  </span><span id="sprytextfield2">
                  <input name="email" type="text" class="textInput" id="email" />
                  <span class="textfieldRequiredMsg">A value is required.</span></span></p>
This is the statement for the submit button:
<span class="clearIt">
                  <input name="send" type="submit" id="send" onclick="MM_validateForm('username','','R','password','','R','name','','R','email','','R' ,'comments','','R');return document.MM_returnValue" value="Send comments" />
                </span><span class="clearIt">
                <input type="hidden" name="MM_insert" value="form1" />
This is the javascript
<script type="text/javascript">

</script>
This is at the bottom of the page:
<script type="text/javascript">

</script>
Thank you for your help.

Showing the {br} tag in text

Similar Messages

Maybe you are looking for