Shuffle problem going between 2000 and XP?

I recently got my girlfriend a shuffle and it worked fine with my computer, which is running 2000 and has the latest iTunes updates and iPod updater. The only problem I have on my computer using her Shuffle or my Nano is the amount of songs I can transfer at once (which is usually 20, 10 on shuffle).
Anyway, I'm not sure if Shuffle was the latest version out of the box or not, but it didn't need updating from my computer, unless it was automatic. She took it home to try it on her computer (running XP) and iTunes wanted to format it. I gave her the updates off the site (since she doesn't have internet) and told her to try them since I didn't think it was needed. She tried that and it still managed to screw it up. So I had her restore it and that worked, but she decided after she got it to work to plug it back in again to play with the songs and it had to be restored again and then restored a few more times after that.
So I was wondering if there was anything I can do to fix it, like uninstall everything that deals with iPod and install the version that came with Shuffle then reinstall the new version over it along with the updater? Take it away because she's apparently bad with technology and have her only deal with my computer for updating her song list? Or was there another way to make it so she won't be restoring shuffle everytime she changes computers? Since I figure it should be compatible enough to go between different versions of windows with different versions of iTunes and still work with no problems.
Windows 2000

That's probably it, since she didn't have any of the music because it was with me. From what I remember, she went around that, and used restore after she backed up all the music. But from what I remember it takes no time at all to a few minutes to restore my Nano, but the Shuffle doesn't have a screen to tell you what's going on (and I find the updater is unreliable with info sometimes).
She has told me she did the same thing about 20 times before it started to work. So she must've been restoring and thinking 'this isn't doing anything' and ripped it out and eventually gave up and let it do it's thing.
But I'll have to deal with it next time when she tries to sync it up with my iTunes, so maybe it won't be a big problem this time around.

Similar Messages

Problem SSO between VPN and NAC

Hello
Description of our problem : SSO doesn't work
-on the first connexion from vpn client we insert two time the login and password :one time for the client vpn and the seconde time for CAA (clean Access agent).
-although for the other connexion that succeed, we insert only one time the login and password (for vpn only) and for CAA the connexion is done automatiquely and a some hours later we reinsert two times login and password for vpn and CAA.
The following steps are done to configure Cisco NAC Appliance to work with a VPN concentrator:
Step 1 Add Default Login Page =ok
Step 2 Configure User Roles and Clean Access Requirements for your VPN users =ok
Step 3 Enable L3 Support on the CAS = ok
Step 4 Verify Discovery Host =ok (CAS IP ADDRESS 192.168.2.11)
Step 5 Add VPN Concentrator to Clean Access Server =ok (ASA IP ADDRESS 192.168.2.1)
Step 6 Make CAS the RADIUS Accounting Server for VPN Concentrator =ok
Step 7 Add Accounting Servers to the CAS (accounting server is CAM IP ADDRESS 192.168.20.10)
Step 8 Map VPN Concentrator(s) to Accounting Server(s)=ok
Step 9 Add VPN Concentrator as a Floating Device =ok
Step 10 Configure Single Sign-On (SSO) on the CAS/CAM =ok
the database for vpn authentication is cisco secure acs(192.168.1.30).
Tanks to any anybody to give us a possible solution.
FILALI Saad
Ares Maroc

Hi
I have just gone the the same issues with SSO VPN with my CAS in real-ip mode.
First thing to consider, when your testing, every time you test a user, make sure you go into the CAS or CAM and remove them as a certified device or active user before you perform your next test. I found that while I was testing that it would sometimes cache the user and I was getting successful auth attempts but due to their device being already accepted on a previous connection because the CAS was not made aware that the user had logged out correctly.
1. Make sure you have a fully functional DNS system on the inside network, I didnt realize how important it was to have forward and reverse look ups for your CAS and CAM. Make sure that all CAS and cams are listed in dns with correct domain names.
This in very important if your running your own CA certificates on cas and cam. Make sure that the CAM and CAS can resolve each other via dns. Make sure the CAM and CAS can perform reverse lookups of each other. Also make sure that when the user VPN's into your ASA that they can also perform DNS lookups and reverse lookups. If they cant perform dns look ups, you may need to temporarily allow the untrusted network full access while you resolve the DNS lookup problem on the client computer. One of the issues I had was that the VPN clients couldnt resolve internal DNS names and so the CCA agent would never auto pop-up and start the auto login process because it was trying to resolve the CAM name and also check that the CA certificate I had on the CAS was legitimate as I had used names in my certs and not IP addresses.
2. Make sure your VPN group settings on the IPSEC policy of the ASA has DNS pointing to your internal DNS server.
3. I know you already said you have done this but check to make sure that the VPN group setup on your ASA for your remote access users, has been setup with the radius accounting being directed the INSIDE interface IP address of your CAS, (if you are running your CAS in real-ip, I found that the inside interface was the only interface listening on 1813, do a 'netstat -an' on the cas to check) if your running in VGW mode then you only have 1 ip address to direct it to anyway.
Follow from step 15 in following link
http://www.cisco.com/en/US/products/ps6128/products_configuration_example09186a008074d641.shtml
3. Troubleshoot and make sure that the ASA actually sends a radius accounting message to the CAS. I did this by ssh into the CAS and doing a 'tcpdump -i any src and not tcp 22'. I then logged into the VPN client and made sure that once I entered my vpn user and pass, that the ASA authenticates the vpn user and then passes a radius accounting message to the CAS informing the CAS it has allowed a new user. If you dont see this radius accounting message hit the CAS interface go back to my step 3 and resolve.
4. Finally check that you have not mistyped a shared secret somwhere, ie between CAM and ACS, Between ASA and ACS, Between ASA and CAS. I had all my users authenticate though radius on my ACS server, a number of times I got caught out by a simple typo in a shared secret.
Try these things first.
Also someone else here on the forums linked this guide to me that also helped me setup my CAS correctly.
http://www.cisco.com/en/US/docs/security/nac/appliance/configuration_guide/412/cas/s_vpncon.html
You may find it useful too.
Dale

Problem syncing between Itunes and nike plus today, June 3rd?

I normally have no trouble syncing runs between itunes and nikeplus. However, today for some reason, Itunes cannot connect with Nikeplus. I had installed the Itunes update (so now am running itunes 8), and am wondering if this could be the problem?
Has anyone else experienced this today?

Yet again, the same problem here. My Nike+ update has always worked flawlessly. However, I just updated to v8.2 and this was my first upload attempt since updating. Now it no longer works. It just produces this generic error message:
"iTunes could not connect to nikeplus.com. An unknown error occurred (-50). Make sure your network connection is active and try again."
This just looks like a generic error if there is no internet connection. However, the internet connection is fine, and I can login through my browser to nikeplus.com without any issues. It's only when attempting to upload my Nike+ data through iTunes that it doesn't work. And it all happened on my first upload attempt after updating to iTunes v8.2.

Photosmart C4480 - Problems sharing between XP and Vista

I have my Photosmart C4480 connected via USB to my desktop which is running Windows XP. I have a home network set up between this desktop and my laptop which is running Windows Vista 32-bit. File sharing works and the computers can succesfully ping each other so no problem there.
I have the printer set to share in XP, but Vista does not see the printer on the network. I installed the printer drivers on both computers.
I know this isn't where it goes, but perhaps someone will read it. I called tech support and spent 57 minutes on the phone and got nowhere. No less than 40 minutes of the 57 were spent in complete silence. The only step the tech support rep asked me to do was to download the newest drivers on the laptop, but then told me not to install them. After 57 minutes, he sent me an e-mail containing a link to the specs for the printer. He asked me to read to him what it said next to "Connectivity" which was of course USB 2.0. I had already tried to explain once to the gentleman the difference between a wireless printer and a printer being shared over a wireless network. Clearly he never got the picture. After I read the connectivity option of USB 2.0 to the guy, he remarked that the printer could not be used on any wireless network. So frustrating. Very, very dissappointed in HP tech support.Very, very unlikely that I will purchase another HP product.
Someone please help me.
This question was solved.
View Solution.

I'm going to go through this very detailed and try to assume that you have no idea what you are doing so that the directions are clear and easy for anyone to understand.
1. You need to first install the printer on the computer that it will be connected to via USB (the Windows XP computer in my example). Follow the exact instructions provided with the printer for best results. The directions are easy and clear and the steps need to be completed in the order they advise for proper installation.
2. After you have the printer installed and working correctly on the computer the printer is directly connected to via USB, use the installation CD to install all the drivers on the computer that you want to access the printer via your home network (the Windows Vista computer in my example). When you put the provided installation CD in this computer click on Install or Setup or whatever similar option you are given on the menu. When you get near the end of the installation process, the setup prompts you to either connect the printer to the computer or to proceed and finish installation without connecting. You want to finish installation without connecting the printer.
3. Now that you have all of the appropriate drivers installed on both computers you want to set up your network. On the computer that has the printer directly connected (the Windows XP computer in my case), you want to run the Network Setup Wizard in order to set up printer sharing. In Windows XP, you want to click Start >> My Network Places. This will open up the My Network Places window. In this window on the left side you should see some options under the heading "Network Tasks". Click on "Set up a home or small office network". This will open the Network Setup Wizard. You will notice that one of the bulleted items listed for what you can do with a network is "Share a printer". Follow and complete all of the steps of the Network Setup Wizard. Once you have completed this, your network should be set up and ready to go.
4. Now you want to turn on sharing for the Photosmart C4480. Once again on the computer that has the printer directly connected via USB (again, Windows XP computer in my example), you want to click Start >> Control Panel >> Printers and Faxes. In this menu you should see your newly installed Photosmart C4480 printer. Right-click on this printer and select "Properties". This will open up the HP Photosmart C4400 series Properties window. You will notice that the window has several tabs at the top. Click on the "Sharing" tab. Select "Share this printer" and give the printer a name in the "Share name:" text box. Don't make the name complicated. I used "HP-C4480" for mine. Click "OK" to close the window and save the changes.
5. You need to find out what the IP address of the computer with the printer directly connected via USB is so that we can make sure your network is set up properly and that the other computer (running Windows Vista in my example) is able to properly communicate with the Windows XP computer. On the Windows XP computer that is connected to the printer, click Start >> All Programs >> Accessories >> Command Prompt. This will open up the Command Prompt window. Type "ipconfig" and press enter. This will show you your IP Address, Subnet Mask, and Default Gateway. Write down your IP address. It will be a series of four number separated by three periods (for example 192.178.1.2). You can close the command prompt window now.
6. Now you need to find out what this computer's name is on the network. Click the Start button and then right-click on "My Computer" and select properties. This will open the "System Properties" window. You will notice that there are several tabs at the top of this window. Select the "Computer Name" tab. The name of this tab can vary from computer to computer, but there will be a tab named "Computer Name" or "Network Name" or something similar. Select that tab. On this tab you will see "Full computer name:" and then to the right of that will be your computer's name on the network (DESKTOP for example). Write this down. Click "OK" to close this window.
7. Now you are done on the computer that has the printer directly connected via USB. Get on your other computer (the Windows Vista computer in my example). In Windows Vista click Start >> Accessories >> Command Prompt. This will open up the Command Prompt window. Type "ping IPaddress" and press enter. Put your IP address (for example 192.178.1.2) where I typed "IPaddress". This tests the communication between the two computers and will display the results after the test is done. Hopefully it will say something like 4 packets sent, 4 packets received, 0% lost. If packets were sent but not received then you have a network problem that must be sorted out before you printer is going to work.
8. Assuming that the ping was successful, you are almost done. Close the Command Prompt window. Still on the Windows Vista computer (the computer not directly connected to the printer via USB), click Start >> Network. This will open up the "Network" window. Now your computer will search and display everything found on your network. This may take a minute or two so be patient if nothing shows up immediately. Eventually the other computer's name should be displayed (DESKTOP for example). Double click the icon above your other computer's name. This should now display a list of everything on the other computer that is shared over the network. Common things to see here are printers and a "SharedDocs" folder. You should see the HP Photosmart C4480 listed here. It will be listed under whatever name you gave to the printer in step 4 above. Right-click on the icon for the printer and select "Connect".
9. This will open up the "Windows Printer Installation" window and will say "Connecting to PRINTERNAME on COMPUTERNAME". I cannot recall exactly what happens the first time you do this, but it may prompt you for some installation and such. If so, just follow whatever steps it gives you and it should successfully connect to the printer.
10. At this point you are ready to go. You should now be able to open up Microsoft Word or any other program and print to the HP Photosmart C4480 printer from the Windows Vista computer over your network. The Photosmart C4480 will most likely not already be set as your default printer so you will have to select it from the menu on the Print window in the "Printer Name" dropdown menu. A window may open up saying that the computer is connecting to the printer when you do this. After this when you click on Print, your document should be sent over the network to the Photosmart C4480.
11. If you want to set your Photosmart C4480 as your default printer on the computer it is not directly connected to (the Windows Vista computer in my example), click on Start >> Control Panel. This will open up the Control Panel Window. Under the "Hardware and Sound" heading, click on "Printer". This will open the Printers window. You should see the "HP Photosmart 4400 series on COMPUTERNAME" icon in this window. Right-click on the icon and select "Set as Default Printer". After you do this you should see a green and white checkmark near the icon for the printer. The Photosmart C4480 is now set as the default printer on the computer and whenever you print from any application it will automatically have the Photosmart C4480 printer selected.
Hope this all made sense and solves your problems. Please post back and let me know if you get it working or if you have any other questions. I'll be more than happy to try and help!

Going between sad and file error icon can't restore....

I've tried resetting, putting in disk mode and everything I can seem to find. I can't get my IPOD recognized by the updater to even attempt a restore. A couple days ago the ipod just froze up no it flips between those error messages while making a clicking noise.
How can I get the updater to even see my ipod to try and do a restore?

First, I have to mention that I am not a techician, I may not understand the reason behind, I could be wrong and my suggestion may not work in your case. But, I must say that all the suggestions I made are basically from my past experienece fixing more than 10 iPods (from my friends and family members). I do not and have no intention to make a suggestion purely from what I heard and read (otherwise I would indicate). These have been tested and proved to work in my cases. I also have to deal with iPod problems such as:-
1. Sad iPod
2. Folder with exclamation mark
3. iPod failed to be recognized by the computer
4. broken iPod with 'clicking' sound
I can simply post a link from the apple article - which would suggest you to do a Reset and Restore actions, however, most of the users would agree with me that the iPod with the aforementioned problems would not able to get mounted with the computer. In that case, how could you do a Restore. Should I just suggest the user to send their iPods for repair?
I have tried myself with different ways, and I discovered a tricks to solve the above problems. First, we must understand what is the problem behind - in my opinion, the problem mainly caused by the head of HD of the iPod getting stuck at a certain point and unable to read the sector properly. If an iPod is an external Hard Disk, how are you going to fix it, I believe that all of us would suggest one to do a Reformat. Right, but unfortunately, the iPod could not be mounted, so what next? I find an interesting way - when the iPod is formatted in PC and connected with a Mac computer, it will "Force" mount, then why not do a Restore there. And once it has been completed, re-connect it with your original PC, and this time with the iPod being formatted to a different format, a window will pop up, indicating that it cant read the iPod and ask whether you would like to do a reformat. Then open the iPod updater and click Restore (back to PC version). Again, interestingly, it works the other way as well i.e. Mac's iPod fixed with a Window based PC.
I understand that there are people who do not agree with my point of views, but I purely do it for the base of trying to give some help. Again, I only make suggestions that have been proved successful in my cases before.

Communication problem with FP-2000 and Labview 7.1

I am using the FP-2000, DO-403 and TC-120 modules with Labview 7.1, being run on a host computer via an ethernet connection. The setup has operated flawlessly for ~2 years; recently, I have noticed that while a VI is running on my PC, connection to the FP module ceases. There is no pop-up "connection error" in my VI, and the all the power and status LEDs on the FP modules are normal. I can still interact with the VI on the front panel while it is running, but nothing is passed to the FP module. I have tried communicating with MAX when this occurs and receive a "no connection" message. Is there a simple solution here, such as rebooting the FP module? Or is it time to invest in new hardware?
Justin

I am having a very similar problem with my cFP-1804 and Labview 7.0. I have no problem initiating communication over ethernet, and the vi will run perfectly for hours or even days. Inevitably, however, at some point there is no longer communication with the cFP-1804. Data is no longer being passed either to or from the cFP-1804, and MAX will show that the device is not connected. I also will not see any pop-up error message that says the connection has been lost, either from Windows or from Labview. The vi will just continue to run as if nothing has happened. Turning the power to the cFP-1804 off and then on will always resolve this problem. Since I am using the cFP-1804 primarily for data logging, however, this behavior is particularly problematic as the system will record nothing but zeroes until I discover that the communication has been severed and perform the manual power cycling.
I have been unable thus far to determine the cause of this problem. Any help would be greatly appreciated.
Thanks,
Derrick

Report generation toolkit problem with office 2000 and office XP

Hello, I am having a problem with running my vi after it is compiled with application builder. The dev machine is an XP box and the targer is windows 2000. I included _Excel Dynamic VIs.vi and _Word Dynamic VIs.vi from the office 2000 section of the install cd (for the report toolkit) in the compile but did not include those files for XP. When I run the application on the target machine (2000), the reporting functions call Excel just fine and the program does not come up with any errors. The program however, is not loading the approprate template and inserting the approprate data. Did I leave some neccessary files out of the compile? Thanks in advance!
Greg
Gregory Osenbach, CLA
Fluke

Hi Acer,
The recommended procedure in your case is to install Microsoft Office 2000 on the development machine and then reinstall the LabVIEW Report Generation Toolkit. When the toolkit is installed, it will check for the current version of Office and install the corresponding VIs to support it. The VIs include different ActiveX calls according to the version of Office. Therefore it is not enough to change the support manually without having the correct version of Office installed first.
However, I would recommend that you just try to run your executable on a machine that has Office 2000 installed. The difference in the ActiveX API for Office XP and 2000 is not that significant, so your application might work perfectly on an Office 2000 machine. If you try to run the executable on a machine with Office 97 installed I'm willing to bet my right arm that you will experience errors.
Good luck Acer!
- Philip Courtois, Thinkbot Solutions

IPad 1 - safari pulls days old pages when going between pages and sometimes drops out

Does anyone have a problem with Safari whereby, you go from one we page to another and when going back to a previous page, Safari shows a days old page? In addition, Safari will drop out to the 'desktop' at times for apparent reason. Doesn't matter if the we page is a simple page or one with video. This all started with Apple pushing their latest iOS. Apple wants to charge $30 for you to ask about this problem but it's their iOS that pushed on their product. Like I stated, it worked fine before their latest iOS push.

Jesus H Christ this is still driving me up the wall, i can't believe everyone is just accepting this. Isn't there a way to fix this? Can we at least have an option to turn this OFF?? Reloading a page everytime i go back is such a waste of time/bandwidth/my nerves when i am in the middle of a page

I try to go to certain websites that I've had no problem going to before, and suddenly, it says, "Page cannot complete because the server is loading in such a way that it will never complete." I've tried erasing my cookies, and it still persists. Help!

I tried going to a site that I've never had problems loading before, and suddenly it says, "Page cannot load because the server is loading in such a way that it will never complete." or something along those lines. I've tried clearing my cookies, but the problem persists. Help!

If clearing the cookies doesn't help then it is possible that the file cookies.sqlite that stores the cookies is corrupted.
Rename (or delete) cookies.sqlite (cookies.sqlite.old) and delete cookies.sqlite-journal and cookies.txt, if they exist, in the Firefox Profile Folder in case the file cookies.sqlite got corrupted.
* http://kb.mozillazine.org/Profile_folder_-_Firefox
*Help > Troubleshooting Information > Profile Directory: Open Containing Folder

Basic Deployment problem, SQL Server 2000 and wanna create setup

I have just finished making a small app using Java and using JDBC driver to connect to an SQL Server 2000 that is installed on my PC.
I now want to create a setup (using NSIS) of this app and distribute among friends. But my problem is that I have created the database on my PC on the SQL Server 2000. Do all the people who want to use my app have to have Sql Server 2000 installed ?? How do they get the data from the database if they dont have Sql Server installed??
I really havent tried much of apps that use databases...soo dont know much, but then any help would be appreciated!!

They have to connect to an instance of SQL Server 2000 that has the database and schema that your app requires, so the host machine has to be visible in their network, with SQL Server installed, listening on the port in your URL connection string (default is 1433), with a username and password that you've set up for a user with the appropriate permissions GRANTed.
As you can see, it's not trivial.
If all the people you're distributing the program to can see your machine's IP address, they can simply connect to your database.
If not, you should provide all the scripts necessary to create the database and create the tables, set up the permissions, and populate the data.
%

Going between CS4 and CS3

Greetings,
Once you've created a composition in a CS4 version of a program such as After Effects, are you able to open the comp in the CS3 version?
I know this problem arises with Adobe Audition when going from Audition 3 to any prior version, and I'm looking to go back to CS3 from CS4 (far too many bugs and I'm finding it far too unstable)
Thanks,
Sarah

I work for a production company in Denver. I have CS4 at work and CS3 at home, and I was unable to bring my AE comp from 4 to 3. It said that AE comp was unable to open on 3 due to it being from a newer version. FYI, I had bugs and terrible preview playback and some bugs, Today I updated my NVidia driver, switched the playback quality to draft quality (by right clicking on the preview window), and put the Quality/Performance marker a step closer to performance on my NVidia Control panel, which was under the regular control panel. CS4 seems to be working great now.

Problems matching between original and remastered albums

I purchased "Tusk" by Fleetwood Mac from the iTunes store awhile back. I now have a remastered CD version that is different than the one for sale on iTunes and also has a bonus disc. The bonus disc stuff is syncing and matching just fine on all devices.
However, when I sync the original remastered album to the cloud, I go to my other devices and it's not pulling the new remastered version for what should be that album. It looks like it's matching to the older original master, but only for about 1/3 of the songs on the new version.
Does anybody have a tip to make iTunes match realize that the remastered version should be all separate version from the original version.
I get the right versions on the original comptuer i loaded up the files to, but all my other devices are stuck with some older masters of some of the songs.
I've tried renaming the new version "remastered" and changed the old one to "original master" but it's still having trouble
Any help?
thanks.

Unfortunately there's no known solution yet. Mastering differences are one of the problems that Apple hasn't yet addressed.
And, as far as we can tell, re-tagging your files doesn't make any difference at all -- it seems to be using waveforms only and sometimes it makes the "wrong" decision. Not just for this, but also mono tracks being Matched to stereo and explicit tracks between Matched to clean versions.

IOS7.1 problem switching between iMessage and "send as text" in group thread

Hi I got a 5c a couple days ago, and updated to 7.1 yesterday so not sure which is causing the problem.
I restored my new phone from a backup off my old iPhone 4 and all is working well except this issue.
I have a group thread of 6 friends, who all have iPhones. We have one message thread that has been going on for 18 months or so, all in iMessage. When I first got this new 5c updated with 7.1 and restored from the backup on Sunday, I was sending iMessages normally like I always have.
Today, iMessage stopped working, so I used the option to "send as text message" that comes up when an iMessage fails. But then all my messages on this group thread were going through in green, instead of blue.
Here are the fixes I've tried:
- I followed older forum suggestions to turn off iMessage, reset network settings, and then reboot my phone. This fixed my iMessage problem within other message threads (with single or group recipients), but all my outgoing texts on this particular group thread are still going through in green. My outgoing messages in other threads are now going through in blue.
- I actually iMessage mostly from my computer, so I tried sending an iMessage to the group thread from my Air to "jolt" the thread on the phone back into blue. The message from the computer showed up in blue when it came through on my phone, but did not "jolt" the phone back into sending iMessages. They still send in green.
- one of my friends on the thread sent me a reply, and it came through as a text message although on her end it shows up in blue. this also did not "jolt" the phone back into sending iMessages.
- I also tried sending a FaceTime request to one of the friends on the group thread, in case that might "jolt" the phone back into iMessage. It didn't work. Boo.
So: is there a manual, thread-specific option for turning iMessage back on? It is working just fine in all other threads, single-recipient or group. It's only this one thread, where I used "send as text message" -- and that was before I did the network settings reset -- where this is a problem.
Please don't suggest that I delete the thread! It is valuable friendship history.
Message was edited by: ebh3777 (i forgot that I'd tried the last strategy on the list)

iMessage will autmoatically turn on if the other person is using ios5 and you have a internet connection when these are not available the message would be sent as normal so it must be a problem with ytour network try settings > general > reset > network

Problem going between wide screen/full screen

I have a widescreen movie edited in iMovie. It contains a ton of files, so I wanted to make it into a quicktime movie (it runs slow with too many files). I dropped the quicktime movie into iMovie in a widescreen formatted project and it came in with black bars on the sides. I dont know what to do! I have the auto adkust/crop/blackbar thing off but it still does it!

Clifton, I just tried to force iMovie HD to export
clips from a widescreen project to QuickTime, then
import them to a widescreen project. No luck at all
exporting as DV streams. When re-imported to iMovie,
they always arrive pillarboxed. It's as if iMovie HD
doesn't recognize the widescreen format no matter how
you create the DV stream in QuickTime. (I tried
exporting the DV as 16:9, adjusting the window size,
lots of things.)
It doesn't even work to import the widescreen
Timeline.mov from a widescreen project! iMovie HD
pillarboxes its own reference movie!
You beutys!
One saving me from irritating everybody again with questions about this thing!
The other handing me the answer on a silver platter, I am lucky!
However I am not going to redo my small clips this time,I am using them as a extra in my new dvd as "bloopers" it gives my movie a new dimension....
This movie is only 13 min long and also includes a slideshow made in iphoto then xported to fullquality. Murphys law say it will probably crash during multiplexing or encoding!!!!!? That can happen when you get lucky.
Go with tiger! Ivar.......

Unload problem: Difference between Project and Authoring

I was wondering if anyone encountered the following problem
and knows how to
solve it. It's quite basic what i'm doing. I'm trying to show
a serie of
bitmap images (prefferably png's) Before i start showing them
i use repeat
loop to preload them :
repeat with i = 1 to 10
member(i,"test").preload
end repeat
(I also tried preloadmember member(1,"test"),
member(10,"test") )
And after displaying it, i jump to another frame and use a
repeat loop to
unload the members. (Note at that point there are no
references in memory or
stage to those members.)
repeat with i = 1 to 10
member(i,"test").unload
end repeat
(I also tried unloadmember member(1,"test"),
member(10,"test") )
In authoring mode it does exactly what is supposed to do. But
in projector
mode, it will not unload. It unloads only a small portion,
about 1 mb. The
total amount needed doesn't matter is seems to stop after
unloading
approxmately 1mb. I tried unloading in idle time, unloading
at intervals of
5 sec and more, it will not work.
When monitoring the process in xp it, the memory usage keeps
climbing. The
odd part is, when preloading a second time, the projector
will not recognize
the bitmap data is already stored in memory and the same
amount of memory
needed again, so it keeps adding more and more memory to the
projector.
Please Help, all suggestions are appreciated.
Thanks,
Mike

I always use the try cath statement...
I think i found the problem.. I still used the sapbobscom 6.7 in place of the 2005 version...
No the addon doesn't dump anymore!
Very strange cause I don't use any object of the 2005 version or something.
Normally it should be backward compatible.. I guess not!!!
Regards,
Steven

Shuffle problem going between 2000 and XP?

Similar Messages

Maybe you are looking for