Problems matching between original and remastered albums

I purchased "Tusk" by Fleetwood Mac from the iTunes store awhile back. I now have a remastered CD version that is different than the one for sale on iTunes and also has a bonus disc. The bonus disc stuff is syncing and matching just fine on all devices.
However, when I sync the original remastered album to the cloud, I go to my other devices and it's not pulling the new remastered version for what should be that album. It looks like it's matching to the older original master, but only for about 1/3 of the songs on the new version.
Does anybody have a tip to make iTunes match realize that the remastered version should be all separate version from the original version.
I get the right versions on the original comptuer i loaded up the files to, but all my other devices are stuck with some older masters of some of the songs.
I've tried renaming the new version "remastered" and changed the old one to "original master" but it's still having trouble
Any help?
thanks.

Unfortunately there's no known solution yet. Mastering differences are one of the problems that Apple hasn't yet addressed.
And, as far as we can tell, re-tagging your files doesn't make any difference at all -- it seems to be using waveforms only and sometimes it makes the "wrong" decision. Not just for this, but also mono tracks being Matched to stereo and explicit tracks between Matched to clean versions.

Similar Messages

Photo count does not match between iPhone and Aperture Album

I have several Aperture albums synced with my iPhone. In one instance, I have an album that in Aperture has 272 images, and on the iPhone has only 62. The 62 on the iPhone are not the first or last 62, but an assortment over the span of the 272, with no apparent rhyme or reason. All the images in Aperture are in the library (none are missing), they are all the same size, format, etc.
For reference, my iPhone has a total of 680 photos in 13 albums, the largest album is 164 photos. There is almost a gig of space left on the 8GB iPhone, so it is not running out of room.
How can I resolve this, or is there a fix/trouble ticket on the map for this? Help!!

Hi. I had the same problem. It was resolved after I selected the all the photos in that album then go to Aperture Menu > Images > Update Preview.
The photo count shown in iTunes was correct after that. Hope this helps.

TS1925 iPad IOS 7.0.2 and Mountain Lion 10.8.5 Calendar colors do not match between computer and device. Problem did not exist until updated IOS arrived. Colours change of their own free will despite being corrected on both iPAD and MacBook Pro. Any an

iPad IOS 7.0.2 and Mountain Lion 10.8.5 Calendar colors do not match between computer and device. Problem did not exist until updated IOS arrived. Colours change of their own free will despite being corrected on both iPAD and MacBook Pro. Any answers?

Please do not post the entire messages log as it takes up unnecessarily a lot of space. It seems that there is a corrupt/nonfunctional file called
[email protected]nt.plist
Go to your hard drive, enter library, go into users, and go into launch agents and delete the thing above. Empty the trash and restart.

'Info' file count varies between original and copied folders

Unlike Snow Leopard, Lion and Mountain Lion 'Info' counts hidden files in folders (usually .DS files). However copied folders, often to different locations, computers, etc, do not count to the same total as the original folder. How can I stop 'Info' counting hidden files in a folder, so that I can check acturately folder contents between original and copied folders. I do not want to have to open each folder and check the count at the bottom of the window, this is very time consuming when dealing with many folders
I hope there is an easy answer ??

You can do this simply in Terminal with the command
ls [directory] wc -l
This will only count the files and folders at the top level (i.e., not the contents of folders within it) and it won't count hidden files.
Examples:
if you want to count how many files are in your home user folder
ls -1 ~/ | wc -l
If you want to count how many files are in your desktop folder
ls -1 ~/Desktop | wc -l
If you want to count how many files are in a folder called 'Temp' on your Desktop:
ls -1 ~/Desktop/Temp | wc -l
If you want to count how many files are in your Trash:
ls -1 ~/.Trash | wc -l
If you want more sophisticated counts, such as subdirectories, type
man ls
into Terminal to read the manual on the various options you can use with the 'ls' command.

Bigger difference between original and corrected footage than in Fcp?

I have tried asking this on the color forum, but have been very unsuccessful, maybe someone here knows why?
Why is it that when Im color correcting In COLOR and enable and disable the grading I get a bigger difference between the original and corrected footage than when I send it back to final cut and compare the result of the cc with the original footage.
In Final cut sometimes it looks almost the same as the original but when Im in Color the difference is always bigger?
When I send it back to FCP its like I get 80 or 85% percent of what I had in color.
Any ideas???

Maybe if you had read what I wrote to you you would have noticed me saying that this happens independent of infrastructure. I tried several different set ups it happens in all of them
Im telling you its not the setup but here goes, the last one I worked on was a mac pro, inked through Fiber Jet SAN with 14TB of usable storage. fully integrated control surface giving DaVinci type ease of operation and control of multiple parameters simultaneously.
latest eCinema 23" LCD HD Reference Monitor.
Again i tried different configurations (Blackmagic, AJA,) and different monitors
Funny thing I have the same exact problem on my simple Macbook Pro.
I first thought set up, but it wasent
I tought it could be the codecs but it wasent. (or maybe it is the xd cam footage)
Now Im wondering if these two softwares manage color and the color space in a different way?

Colors don't match between PS and AI (CS 3)

CMYK images are displaying differently for me between PS and AI. In PS when they look "good" (and print similarly on my profiled Epson), in AI they look more contrasty and saturated, with a little color shift in the greens (towards blue).
My monitor is calibrated with a Monaco Optix, and I notice the difference between apps both on it and on my MacBook Pro screen.
Image profile is the standard SWOP v2. In AI, the document profile is SWOP v2. "Proof Colors" is unchecked in both apps. (If I check it, by default AI is radically different because it defaults to simulating black ink. Disabling this causes Proof Colors to have no visual effect.)
I asked this already in the AI forum, and the answer I got is basically "they should match, they do for me". I noticed elsewhere on this forum that AI and PS were different in color management, or rendering, or something, but didn't see much info beyond that.
I figured there were enough color hounds on this forum to set me straight.
- Bob

With a properly calibrated and profiled monitor, and with correct color settings in both programs, trust Photoshop's colors over Illustrator's.
This may have changed in CS4, but in CS3 Illustrator hadn't caught up with Photoshop in regard to color management.

Calendar times do not match between iphone and outlook

I have an iPhone 4S, at work I use a PC and Outlook. I have both my PC and my iPhone on the same time zone. If I set an appointment in either calendar the time gets switched in the other. For example: I set an appointment in my iphone calendar for 11am. One my outlook calendar it shows the same appointment at 10am. Both systems are set to the same time zone, what gives? How do I fix this?
Another thing I should add is I am in Saskatchewan Canada. We do not switch time for daylight savings in March an November. So when the time switched in November everthing works great, it is only between March and November whe this problem arrises. Saskatchewan is a setting in timezones for bothe the iphone and outlook so I don't think this should matter. Unless one of the companies does not know Saskatchewan does not change times.
Any suggestions?

Apple puts Saskatchewan into Central Standard Time, which isn't correct. Then when it syncs to Outlook, Outlook puts the appointment into the CST time zone, instead of the Saskatchewan -6 time zone. The problem is Apple's iCloud sending the wrong information to Outlook.
Need a fix for this please.

Problem SSO between VPN and NAC

Hello
Description of our problem : SSO doesn't work
-on the first connexion from vpn client we insert two time the login and password :one time for the client vpn and the seconde time for CAA (clean Access agent).
-although for the other connexion that succeed, we insert only one time the login and password (for vpn only) and for CAA the connexion is done automatiquely and a some hours later we reinsert two times login and password for vpn and CAA.
The following steps are done to configure Cisco NAC Appliance to work with a VPN concentrator:
Step 1 Add Default Login Page =ok
Step 2 Configure User Roles and Clean Access Requirements for your VPN users =ok
Step 3 Enable L3 Support on the CAS = ok
Step 4 Verify Discovery Host =ok (CAS IP ADDRESS 192.168.2.11)
Step 5 Add VPN Concentrator to Clean Access Server =ok (ASA IP ADDRESS 192.168.2.1)
Step 6 Make CAS the RADIUS Accounting Server for VPN Concentrator =ok
Step 7 Add Accounting Servers to the CAS (accounting server is CAM IP ADDRESS 192.168.20.10)
Step 8 Map VPN Concentrator(s) to Accounting Server(s)=ok
Step 9 Add VPN Concentrator as a Floating Device =ok
Step 10 Configure Single Sign-On (SSO) on the CAS/CAM =ok
the database for vpn authentication is cisco secure acs(192.168.1.30).
Tanks to any anybody to give us a possible solution.
FILALI Saad
Ares Maroc

Hi
I have just gone the the same issues with SSO VPN with my CAS in real-ip mode.
First thing to consider, when your testing, every time you test a user, make sure you go into the CAS or CAM and remove them as a certified device or active user before you perform your next test. I found that while I was testing that it would sometimes cache the user and I was getting successful auth attempts but due to their device being already accepted on a previous connection because the CAS was not made aware that the user had logged out correctly.
1. Make sure you have a fully functional DNS system on the inside network, I didnt realize how important it was to have forward and reverse look ups for your CAS and CAM. Make sure that all CAS and cams are listed in dns with correct domain names.
This in very important if your running your own CA certificates on cas and cam. Make sure that the CAM and CAS can resolve each other via dns. Make sure the CAM and CAS can perform reverse lookups of each other. Also make sure that when the user VPN's into your ASA that they can also perform DNS lookups and reverse lookups. If they cant perform dns look ups, you may need to temporarily allow the untrusted network full access while you resolve the DNS lookup problem on the client computer. One of the issues I had was that the VPN clients couldnt resolve internal DNS names and so the CCA agent would never auto pop-up and start the auto login process because it was trying to resolve the CAM name and also check that the CA certificate I had on the CAS was legitimate as I had used names in my certs and not IP addresses.
2. Make sure your VPN group settings on the IPSEC policy of the ASA has DNS pointing to your internal DNS server.
3. I know you already said you have done this but check to make sure that the VPN group setup on your ASA for your remote access users, has been setup with the radius accounting being directed the INSIDE interface IP address of your CAS, (if you are running your CAS in real-ip, I found that the inside interface was the only interface listening on 1813, do a 'netstat -an' on the cas to check) if your running in VGW mode then you only have 1 ip address to direct it to anyway.
Follow from step 15 in following link
http://www.cisco.com/en/US/products/ps6128/products_configuration_example09186a008074d641.shtml
3. Troubleshoot and make sure that the ASA actually sends a radius accounting message to the CAS. I did this by ssh into the CAS and doing a 'tcpdump -i any src and not tcp 22'. I then logged into the VPN client and made sure that once I entered my vpn user and pass, that the ASA authenticates the vpn user and then passes a radius accounting message to the CAS informing the CAS it has allowed a new user. If you dont see this radius accounting message hit the CAS interface go back to my step 3 and resolve.
4. Finally check that you have not mistyped a shared secret somwhere, ie between CAM and ACS, Between ASA and ACS, Between ASA and CAS. I had all my users authenticate though radius on my ACS server, a number of times I got caught out by a simple typo in a shared secret.
Try these things first.
Also someone else here on the forums linked this guide to me that also helped me setup my CAS correctly.
http://www.cisco.com/en/US/docs/security/nac/appliance/configuration_guide/412/cas/s_vpncon.html
You may find it useful too.
Dale

Problem syncing between Itunes and nike plus today, June 3rd?

I normally have no trouble syncing runs between itunes and nikeplus. However, today for some reason, Itunes cannot connect with Nikeplus. I had installed the Itunes update (so now am running itunes 8), and am wondering if this could be the problem?
Has anyone else experienced this today?

Yet again, the same problem here. My Nike+ update has always worked flawlessly. However, I just updated to v8.2 and this was my first upload attempt since updating. Now it no longer works. It just produces this generic error message:
"iTunes could not connect to nikeplus.com. An unknown error occurred (-50). Make sure your network connection is active and try again."
This just looks like a generic error if there is no internet connection. However, the internet connection is fine, and I can login through my browser to nikeplus.com without any issues. It's only when attempting to upload my Nike+ data through iTunes that it doesn't work. And it all happened on my first upload attempt after updating to iTunes v8.2.

Withdrawal Qty don't match between ECC and APO

Hi Experts.
I am facing a discrepancy for Withdrawal Qty between ECC and APO before delivery/PGI creation.
In ECC T.code MD63 I am able to see the withdrawal Qty as expected but in APO a duplicated withdrawal Qty is being created. But this is not happening for all materials, only some specifics materials. I did a check in Material Master data and I have no found any difference between a material that is working and one that is not working...
Can please somebody explain me why APO is dobling the Withdrawal Qty.
Thanks a Lot
Daniel Campos.

Please check wthether you have dp index duplication in this problem.
Please follow the process.
For this process , you need to follow these steps .
1. From the table /SAPAPO/MATKEY , find the product id of the product for which you feel there is problem .
2. Find the location id from table /SAPAPO/LOC for the location.
3. Use the above found 'product id' and 'location id' to find the dp index in table "/SAPAPO/DP_HEAD " .
Enter the planning version ' 000 ' in this table . If there is some error you will find multiple entries of the 'dp index ' in this table for the ' 000 ' planning version. If error found use below program to delete the dp index .
4. Precaution should be taken before we delete the 'Dp Index' as the consumption history is lost due to this . In the program 'Z_DEL_WITHDRAWL' there are 2 check boxes " update " and " list ". List will show the DP index and update will delete it. Need to extremely careful in this program as wrong selection will cause problem .

Wich is table for match between Infoprovider and update with technical name

Thanks in advance!
Bye!
Ferdinando

Hello ,
You can check table --> RSUPDINFO table for Update rules with tech ID between Cube and InfoSources.
and other ref tables are --> RSUPDROUT / RSUPDDAT / RSUPDKEY /
--EnjoySAP
**Award credits if you are done with my answer

Only Smart Playlists match between iPhone and iTunes for songs purchased on iPhone

I purchase an album on my iPhone. The music shows up on my iPhone in its Purchased playlist. I start my computer and the music automatically downloads on my computer and is placed into the Purchased playlist under the iTunes Store on the left panel in iTunes on my computer. I sync the phone to iTunes in which I have this Purchased playlist selected to sync with my iPhone. And here's the rub:
From then on, when I plug in my iPhone to sync, it shows up as a device on the left panel of iTunes. You click on it to show the folders below and, when you click on the phone's Purchased playlist on the computer (left panel under devices), it shows all the new songs I just purchased there in the purchased playlist. But when you open the actual playlist on the iPhone, some of the songs from the new album are missing from the Playlist on the iPhone. Again, ALL of the songs still show on the playlist in iTunes and ALL of the songs STILL show on the playlist in iTunes that is under the device iPhone listing in the left panel of iTunes. So...even iTunes thinks that ALL the songs are still in the Purchased playlist on the iPhone, but when you open the iPhone, some of the songs from the playlist are missing.
I've even tried creating new playlists with different names and dropping all of the new album songs into this different new playlist and syncing this new playlist to the iPhone. Even then, the same songs are STILL missing on the new synced playlist on the iPhone.
There is only way that I can make all the songs show up on an iTunes playlist and on the same iPhone playlist. This only happens if I create and use a Smart Playlist to specifically select those songs. A Smart playlist always shows the correct songs in both iTunes and the iPhone. But, again ONLY if it's a Smart Playlist. If I make any regular playlist and drop the songs into it in iTunes, the playlist shows up on my iPhone but is missing some of the songs.
One other thing...I have no idea how this happens or what is causing it. Sometimes, one or two of the missing songs will show up hours or days later. Not sure if it's because I played them on my phone or on my computer iTunes and that caused some flag to trip that then allowed them to show up in the playlist from which they were missing.
Don't tell me to delete all music and resync all music or to manually manage my songs or to restore my phone. I've done that so many times and it does not work. I've tried unchecking the songs and rechecking the songs between syncs. I've tried deleting the songs from all devices and redownloading. Nothing works. The only way I've been able to fix this is the delete all content from my phone and do a complete restore and NOT restore from my previous backup (treat my iPhone like a new phone with no backup available). With 4000 songs and 100+ apps and podcasts, etc...that is WAY too cumbersome and takes to long to do everytime I purchase a song on my iPhone.
Again, this is NO ISSUE with a Smart Playlist...but only a Smart Playlist. The work around right now is that I have a Smart Playlist that always shows the last 200 songs recently purchased. That playlist is always accurate on both iTunes and the iPhone.

I checked again last night, and now iTunes matched the phone settings, saying zero space was available. I had nearly 20 gigs of "Other" data :/
So I erased all settings/data on the iPhone and restored from an iCloud backup from last week, and now everything seems fine, with over 15 GB of available space.

Shuffle problem going between 2000 and XP?

I recently got my girlfriend a shuffle and it worked fine with my computer, which is running 2000 and has the latest iTunes updates and iPod updater. The only problem I have on my computer using her Shuffle or my Nano is the amount of songs I can transfer at once (which is usually 20, 10 on shuffle).
Anyway, I'm not sure if Shuffle was the latest version out of the box or not, but it didn't need updating from my computer, unless it was automatic. She took it home to try it on her computer (running XP) and iTunes wanted to format it. I gave her the updates off the site (since she doesn't have internet) and told her to try them since I didn't think it was needed. She tried that and it still managed to screw it up. So I had her restore it and that worked, but she decided after she got it to work to plug it back in again to play with the songs and it had to be restored again and then restored a few more times after that.
So I was wondering if there was anything I can do to fix it, like uninstall everything that deals with iPod and install the version that came with Shuffle then reinstall the new version over it along with the updater? Take it away because she's apparently bad with technology and have her only deal with my computer for updating her song list? Or was there another way to make it so she won't be restoring shuffle everytime she changes computers? Since I figure it should be compatible enough to go between different versions of windows with different versions of iTunes and still work with no problems.
Windows 2000

That's probably it, since she didn't have any of the music because it was with me. From what I remember, she went around that, and used restore after she backed up all the music. But from what I remember it takes no time at all to a few minutes to restore my Nano, but the Shuffle doesn't have a screen to tell you what's going on (and I find the updater is unreliable with info sometimes).
She has told me she did the same thing about 20 times before it started to work. So she must've been restoring and thinking 'this isn't doing anything' and ripped it out and eventually gave up and let it do it's thing.
But I'll have to deal with it next time when she tries to sync it up with my iTunes, so maybe it won't be a big problem this time around.

Calendar times do not match between iPhone and Outlook 2013

I have Outlook 2013 sycing with iCloud (poorly but it works).
There is a time zone issue between these two programs. I live in Saskatchewan (-6) where we don't have daylight savings time. I have Time Zone Support turned off on my phone, and the time zone is automatically being detected.
My computer is set to Saskatchewan (-6) and if I create an event on my iPhone 5 at 9am, it will sync to my Outlook calendar for 8am in the Central Standard Time Zone instead of the Sask Time Zone. So I change it to Sask in Outlook and it now shows up in Outlook at 9am, but it is on my phone for 10am. I believe there is an issue where iCloud is sending the wrong time zone information to Outlook. I have read in other forums that everything works fine between the months of November and March, so it is definitely a time zone issue.
Hope this gets fixed.

Apple puts Saskatchewan into Central Standard Time, which isn't correct. Then when it syncs to Outlook, Outlook puts the appointment into the CST time zone, instead of the Saskatchewan -6 time zone. The problem is Apple's iCloud sending the wrong information to Outlook.
Need a fix for this please.

Playback is inconsistent between original and test disc

I have created a DVD and just received the test disc. Before we sent it off to replication when we tested the DVD both in the simulator and the Apple DVD player everything worked as it should. We couldn't burn a disc ourselves because it was a DVD-9.
So we have set button highlight markers so that when a commercial is playing you can hit enter and then jump to a longer commercial and then jump back to the original program.
The problem is we can't pause the video in either one of those sections. The first commercial is on the main track and no user functions are disabled. The second part that you jump to is on another track where the ability to scan and chapter both forwards and backwards IS disabled... Nothing else.
Well when we watch the test disc from replication we can't pause in either of those sections.
I checked the project in DVDSP and everything is as it should be. When I simulate it I can pause. When I play the Video TS folder on the DVD player I can pause. SO why is the test disc different?
I am assuming this is a problem on the DVDSP end and not on the replicator's part. So what do I do?

I basically set up 1 track which is all of the main "play all" content. There's 3 stories set up for that track. So if you hit play all or either of the variations of the Play All we have created those are covered.
The commercials are set up within those with their buttons. Now if you press enter while the button over video is there the pieces you jump to are on another track. There are also stories set up for that track that coincide with the stories on the main track.
The only UOP that's disabled is on that second track. I disabled the scan forward/backward and the chapter forward/back. If I hadn't disabled them then you could scan forward to the next piece of video, which I did not want.
I used no scripting.
We have contacted another 3rd party replicator which backed up what our replicator said... That its an authoring issue.
So we made some calls and found a professional authoring house. They seemed to feel that perhaps we hit the wall with what DVDSP can do with regards to the functionality we are looking for. They said that DVDSP basically over simplifies certain commands which require more in depth scripting and what not. They said we would need a program like Sonic to do what we needed. So that is where we are with that.
On a side note I cut out half of our content and burned a disc to test on various players. And that disc was buggy as well, working on some players while not working on others.
Some of the buttons over video worked for about half of the time while others didn't. Also, Some of the buttons which did work only worked for about 3/4 of the button. Meaning, if I had a 2 minute chapter with a button over video over the entire 2 minutes, the button only worked for the first minute and a half and for the last 30 seconds nothing happened when you activated the button.
So the only progress I have made is that the problems lies on our end.

Problems matching between original and remastered albums

Similar Messages

Maybe you are looking for