SID in Update Table of DSO

Hi,
What is the use of the SID in the update (or new) table of DSO? Anyway the values of the data and key fields are stored in this table. How does the SID entry help here?
Regards,

Hello Suraj
Yes , you are correct why do we need SID for DSO if it supposed to have a Flat Structure like a Db table? Quite surprising really.
But the reason lies as BEx queries are dependent on SIDs, i.e all the BEx queries need SIDs to run. This is common for queries on Cube, DSO , InfoSet of MP. That is how BEx queries have been designed.
You can understand that by running a query and checking the work process detail from SM50. You will see all the joins are based on SID.
In DSO settings you may / may not choose the option of "Generation of SIDs upon Activation". If you do not choose the option, SIDs will not be generated during activation and in BW3.5 you can not report on this DSO. But in BI 7 , you can report in this case also, as system generates SIDs run time. Query response will be slower then.
If you do not generate SIDs during activation, that does not have any impact on DTP loading time. But it has huge impact on DSO activation time. Not generating SIDs will make your DSO activation time 1/3 rd approximately.
Hope , I could make your doubt clear. Let me know if you have any more question.
cheers
Anindya

Similar Messages

How can i update data of DSO and Cube using ABAP??

Hello Experts
I have a requrement in which i need to update/ delete data from DSO and cube based on certain keys using ABAP.
Please let me know how can i modify contets of cube or active table of DSO.
Thanks
Sudeep

Hi
I have requirement such that i need to update certain key figures in DSO after certain time.
for eg. say record with key a is loaded to DSO and currospoding key figure was loaded with value 10
after few days because of certain parameters changing in system i need to modify key figure value.
currently i am doing same using 1 self transformation i.e. by loading same data again in same DSO.
Amount of data is very huge and causing performance issues in system.
now A is not key but i need to modify record for few combinations which apperar multiple times in DSO.
Same DSO data is loaded into Cube regularly.
I may need to update data after gap of few weeks as well.
This design will be used as template and needto keep whole logic generic.
So wring Function module can make it generic.
Thanks
Sudeep

Error while activating data from new table of DSO to active table

HI,
while activating data from new table of DSO to active table i am getting
error message as "Error occurred while deciding partition number".
Plz any idea hoe to resolve this one.
thanks & regards
KPS MOORTHY

Hi
You are trying to update/upload the Records which are already been there in the DSO Active Data Table which has the partition.
Try to see the Record Nos already been activated and update/upload with selective, if possible.
You can trace the changes at Change log table for the same.
Hope it helps
Edited by: Aduri on Jan 21, 2009 10:38 AM

Data is not Loading into Active data table on DSO in BI 7.0

Hi,
Iam loading data from a flat file to ODS in BI 7.0, the data is loading up to PSA and New data table , But the DSO is not activating, after all possible steps like, automatically setting/ manualy doing / through Process Chain....still unable to do it....Cud u pls tell the reason and solution.

Hi Sri,
Did you get any solution for this issue. Your input is highly appreciated.
We are also running on the same boat, I am using the End-Routine to fill up the 2 fields (one is Key figure and Characteristics) from one DSO to the other. In my case along with all other fields this key figure is also populating before and after the Activation of DSO. But the new Characteristics is populating in the update table (/BIC/A***40) before activating the DSO, once I activated the DSO the new characteristics is not filling up in the (/BIC/A***00), rest are coming without issues.
I built the same logic for other current data DSO (write optimized) from other DSO to fill the same fields with the similar logic in the end routine, it is up and running without any issues.
Thanks,
Dileep

Date format accepted in new table but not in active table for DSO, BI 7.0

Hi All,
Need help from the experts, i was trying to load Flate file data in CSV(Coma separated) and cell type general for dates(yyyymmdd). everything was fine i have a routine for new fields in DSO for Fiscal week and Fiscal Quater which is calculating based on my Flate file date i.e delivery date(yyyymmdd).
The New table of DSO means before activation everything was fine and all the logics and mappings working for the Fiscal week and Fiscal Quater and that can be visible, But after activation the same only the Fiscal week and Fiscal Quater is not showing data, its comming as blank and '000000' for all records.
As the Fiscal week and Fiscal Quater is maintained as custmised InfoObject with data type NUM.
Can you tell what i am missing, because i tried with different cell type also in CSV File.
Thanks and Regards,
Taps
Edited by: Taps on Oct 1, 2010 1:21 PM

Resolved...!!!
Follow the link ...
/people/maheshsingh.mony5/blog/2010/09/24/update-behavior-of-end-routine-in-transformations
Regards,
Taps
Edited by: Taps on Oct 1, 2010 2:02 PM

How to transfer data in change log table of dso to z-table using abap code

Hi can you please explain me how to transfer data in change log table of dso to z-table using abap code ,with out using Function module concept

PROGRAM NAME:   ZBW_DELTA_TO_GSTAR                                 **
report ZBW_DELTA_TO_GSTAR no standard page heading
                                 line-size 120
                                 line-count 75
                                 message-id ZBW_MSG_CLS.
tables:   ZGIV_DLTA_EBV_BB,
          ZGIV_DLTA_EM2_BL,
          ZGIV_DLTA_EM2_BK.
Selection Screen Definitions
SELECTION-SCREEN: BEGIN OF BLOCK INNER WITH FRAME TITLE TEXT-001.
SELECTION-SCREEN: SKIP 1.
PARAMETERS:       EBVBB RADIOBUTTON GROUP ROLL,
                  EM2BL RADIOBUTTON GROUP ROLL,
                  EM2BK RADIOBUTTON GROUP ROLL.
SELECTION-SCREEN: END OF BLOCK INNER.
Data: WS_UPDATE_FLAG Type C,
       UCounter(9)      Type N,
       ICounter(9)      Type N.
DATA: T_ZGIV_DLTA_EBV_BB Type Standard Table of ZGIV_DLTA_EBV_BB,
       s_ZGIV_DLTA_EBV_BB LIKE line of T_ZGIV_DLTA_EBV_BB.
DATA: T_ZGIV_DLTA_EM2_BK Type Standard Table of ZGIV_DLTA_EM2_BK,
       s_ZGIV_DLTA_EM2_BK LIKE line of T_ZGIV_DLTA_EM2_BK.
DATA: T_ZGIV_DLTA_EM2_BL Type Standard Table of ZGIV_DLTA_EM2_BL,
       s_ZGIV_DLTA_EM2_BL LIKE line of T_ZGIV_DLTA_EM2_BL.
Standard Internal Tables - Describe usage.
data: begin of i_AEPSD_O0140 occurs 0.
        include structure /BIC/AEPSD_O0140.
data: end of i_AEPSD_O0140.
data: begin of i_AEPSD_O0240 occurs 0.
        include structure /BIC/AEPSD_O0240.
data: end of i_AEPSD_O0240.
data: begin of i_AEPSD_O0340 occurs 0.
        include structure /BIC/AEPSD_O0340.
data: end of i_AEPSD_O0340.
data: begin of i_GIV_DLTA_EBV_BB occurs 0.
        include structure ZGIV_DLTA_EBV_BB.
data: end of i_GIV_DLTA_EBV_BB.
data: begin of i_GIV_DLTA_EM2_BK occurs 0.
        include structure ZGIV_DLTA_EM2_BK.
data: end of i_GIV_DLTA_EM2_BK.
data: begin of i_GIV_DLTA_EM2_BL occurs 0.
        include structure ZGIV_DLTA_EM2_BL.
data: end of i_GIV_DLTA_EM2_BL.
Miscellaneous Program Variables and Constants.
TOP-OF-PAGE
top-of-page.
START-OF-SELECTION
start-of-selection.
Clear: i_GIV_DLTA_EBV_BB,
         i_GIV_DLTA_EM2_BK,
         i_GIV_DLTA_EM2_BL,
         UCounter, ICounter.
IF EBVBB = 'X'.
    PERFORM 100_EXTRACT_EBV_BB_DELTA_RECS.
ELSEIF EM2BK = 'X'.
    PERFORM 100_EXTRACT_EM2_BK_DELTA_RECS.
ELSE.
    PERFORM 100_EXTRACT_EM2_BL_DELTA_RECS.
ENDIF.
FORM 100_EXTRACT_EBV_BB_DELTA_RECS
FORM 100_EXTRACT_EBV_BB_DELTA_RECS.
Refresh:   i_AEPSD_O0140,
             i_GIV_DLTA_EBV_BB.
Clear:      UCounter, ICounter, s_ZGIV_DLTA_EBV_BB .
Select * From /BIC/AEPSD_O0140
    Into TABLE i_AEPSD_O0140.
IF SY-Subrc = 0.
    LOOP AT i_AEPSD_O0140.
      MOVE-CORRESPONDING i_AEPSD_O0140 TO s_ZGIV_DLTA_EBV_BB.
      MOVE SY-DATUM to s_ZGIV_DLTA_EBV_BB-create_dt.
      INSERT ZGIV_DLTA_EBV_BB FROM s_ZGIV_DLTA_EBV_BB.
      IF SY-Subrc = 0.
        ICounter = ICounter + 1.
      ELSE.
        UPDATE ZGIV_DLTA_EBV_BB FROM s_ZGIV_DLTA_EBV_BB.
        IF SY-Subrc = 0.
          UCounter = UCounter + 1.
        ELSE.
          Message E067 with SY-DATUM ' ' SY-UZEIT ' '.
        ENDIF.
      ENDIF.
    ENDLOOP.
ENDIF.
ENDFORM.                    "100_EXTRACT_EBV_BB_DELTA_RECS
FORM 100_EXTRACT_EM2_BK_DELTA_RECS
FORM 100_EXTRACT_EM2_BK_DELTA_RECS.
Refresh:   i_AEPSD_O0240,
           i_GIV_DLTA_EM2_BK.
Clear:      UCounter, ICounter, s_ZGIV_DLTA_EM2_BK .
Select * From /BIC/AEPSD_O0240
    Into TABLE i_AEPSD_O0240.
IF SY-Subrc = 0.
    LOOP AT i_AEPSD_O0240.
      MOVE-CORRESPONDING i_AEPSD_O0240 TO s_ZGIV_DLTA_EM2_BK.
      MOVE SY-DATUM to s_ZGIV_DLTA_EM2_BK-create_dt.
        INSERT ZGIV_DLTA_EM2_BK FROM s_ZGIV_DLTA_EM2_BK.
      IF SY-Subrc = 0.
        ICounter = ICounter + 1.
      ELSE.
        UPDATE ZGIV_DLTA_EM2_BK FROM s_ZGIV_DLTA_EM2_BK.
        IF SY-Subrc = 0.
          UCounter = UCounter + 1.
        ELSE.
          Message E067 with SY-DATUM ' ' SY-UZEIT ' '.
        ENDIF.
      ENDIF.
    ENDLOOP.
ENDIF.
ENDFORM.                    "100_EXTRACT_EM2_BK_DELTA_RECS
FORM 100_EXTRACT_EM2_BL_DELTA_RECS
FORM 100_EXTRACT_EM2_BL_DELTA_RECS.
Refresh:   i_AEPSD_O0340,
           i_GIV_DLTA_EM2_BL.
Clear:      UCounter, ICounter, s_ZGIV_DLTA_EM2_BL .
Select * From /BIC/AEPSD_O0340
    Into TABLE i_AEPSD_O0340.
IF SY-Subrc = 0.
    LOOP AT i_AEPSD_O0340.
      MOVE-CORRESPONDING i_AEPSD_O0340 TO s_ZGIV_DLTA_EM2_BL.
      MOVE SY-DATUM to s_ZGIV_DLTA_EM2_BL-create_dt.
        INSERT ZGIV_DLTA_EM2_BL FROM s_ZGIV_DLTA_EM2_BL.
      IF SY-Subrc = 0.
        ICounter = ICounter + 1.
      ELSE.
        UPDATE ZGIV_DLTA_EM2_BL FROM s_ZGIV_DLTA_EM2_BL.
        IF SY-Subrc = 0.
          UCounter = UCounter + 1.
        ELSE.
          Message E067 with SY-DATUM ' ' SY-UZEIT ' '.
        ENDIF.
      ENDIF.
    ENDLOOP.
ENDIF.
ENDFORM.                    "100_EXTRACT_EM2_BL_DELTA_RECS
END-OF-SELECTION
end-of-selection.
perform D1000_REPORT_DATA.
D1000_REPORT_DATA
form D1000_REPORT_DATA.
*Display the title of the program
write: /25 SY-TITLE.
skip.
Diaplay the details of the user and time
write: /1 'Executed by', 15 SY-UNAME, 30 'Date',
38 SY-DATUM, 53 'Time', 60 SY-UZEIT.
skip 2.
write: / 'Delta Records have been extracted ',
         /   'Updates : ', UCounter,
         /   'Inserts : ', ICounter.
skip.
skip 3.
write: /20 'End of the report'.
endform.                                           "D1000_REPORT_DATA
chgeck it out this also may hep you

Error when assigning SID: Action VAL_SID_CONVERT table 0TYPE

Hi Experts
When I am trying to load the data into DSO the data is scheduling But DSO data is not Activated It Showing Error
messages in Log for request processing in Request tab of DSO Manage.
1.Error when assigning SID: Action VAL_SID_CONVERT table 0TYPE
2.Value 'area' (hex. '61726561') of characteristic 0TYPE contains invalid characters
3.Error when assigning SID: Action VAL_SID_CONVERT table ZCH_O_TYP
4.Value 'area' (hex. '61726561') of characteristic 0TYPE contains invalid characters
5.Error when assigning SID: Action VAL_SID_CONVERT table ZVALUE
6.Value '0000000000000000860452655_PDF_45U x 200' (hex. '30303030303030303030303030303030383630343532363535') of
characteristic ZVALUE contains invalid characters
7.Error when assigning SID: Action VAL_SID_CONVERT table ZVALUE_O .
8.Value '224053 sht 1.pdf##~##000000153363' (hex. '3232343035332073687420312E70646623237E232330303030') of
characteristic ZVALUE_O contains invalid characters.
9.Activation of M records from DataStore object ZCF_O02 terminated
I have tried adding the special character # with transaction rskc but nothing seems to change and
I still get the same error.
DATA: T_ALL(100) type C,
T_VAR1(45) type C value 'ABCDEFGHIJKLMNOPQRSTUVWXYZ abcdefghijklmnopq',
T_VAR2(50) type C Value 'rstuvwxyz 0123456789 @#$%^&*()_-+=:;\/?',
temp(60) type c,
cnt type i,
length type i.
clear : cnt,temp,length.
break-point.
temp = SOURCE_FIELDS-TXZ01.
CONCATENATE T_VAR1 T_VAR2 into T_ALL.
cnt = 0.
length = STRLEN( temp ).
IF NOT temp CO T_ALL.
WHILE cnt < length.
IF NOT temp+cnt(1) CO T_ALL.
CLEAR: temp+cnt(1).
ENDIF.
cnt = cnt + 1.
ENDWHILE.
ENDIF.
translate temp to upper case.
RESULT = temp.
i am getting the above error, one of the expert suggested to implement this code but i am getting some errros when i execute this one please can anyone check this code and correct the errors it would be help ful to me.
Regards
Venu

Hi ,
Implement this code to resolve the issue.
You can use the sample code below to choose only the charachters to be allowed in for the field. Using that you can remove all special charachters and # symbols as required
DATA: T_ALL(100) type C,
T_VAR1(45) type C value 'ABCDEFGHIJKLMNOPQRSTUVWXYZ abcdefghijklmnopq',
T_VAR2(50) type C Value 'rstuvwxyz 0123456789 @#$%^&*()_-+=:;\/?',
temp(60) type c,
cnt type i,
length type i.
clear : cnt,temp,length.
break-point.
temp = SOURCE_FIELDS-TXZ01.
CONCATENATE T_VAR1 T_VAR2 into T_ALL.
cnt = 0.
length = STRLEN( temp ).
IF NOT temp CO T_ALL.
WHILE cnt < length.
IF NOT temp+cnt(1) CO T_ALL.
CLEAR: temp+cnt(1).
ENDIF.
cnt = cnt + 1.
ENDWHILE.
ENDIF.
translate temp to upper case.
RESULT = temp.
Regards,
Rahul.

"Error in updating Table J_1iexchdr"

Hi ,
When I am creating the excise invoice, It's terminated the program and gives the following error
"Error in updating Table J_1iexchdr"
What can be the reason?
Regards
Prem

Hi prem
Look if these threads can help
RG23C Update Problem
Problem in SAP Script
billing document not creating
return delivery
************Reward points if usefull**************

Error in updating table J_1PART2

Hi,
I am getting an error while saving the excise invoice as 'error in updating table J_1PART2'.
What would have gone wrong?????? please help!!!
Thanks ,
Ramya

Discussion moved from SAP ERP Sales and Distribution (SAP SD) to Internationalization and Unicode
Please use Internationalization and Unicode for you CIN related queries

Error in updating table J_1IEXCHDR,J_1IEXCDTL in tcode J1IJ

Hi,
while cancelling excise invoice in Tcode J1IJ ,
we are getting 'error in updating table J_1IEXCHDR,J_1IEXCDTL'.
what is missing or tell the procedure to resolve the issue.
Regards,

Discussion moved from SAP ERP Sales and Distribution (SAP SD) to Internationalization and Unicode
Please use Internationalization and Unicode for you CIN related queries

No data in Active table of DSO for fields populated by End Routine

Hi,
I have a Standard DSO where we are populating few fields by using End Routine.
Last week we added 5 more fields to DSO and wrote a logic in End ROutine to populate the DSO. These new fields dont have any mapping and these are just populated by end routine only.
When I loaded the data from Data Source TO DSO, Data is loaded correctly into NEW DATA Table of DSO for all the fields. I could see correct data as per the logic in NEW Table including old and new fields.
However, when I activate the DSO, I could not find the data for new fields which I added last week. Remaining fields are getting data as per the logic. Only these five fields are not having any data.
Can you please let me know if any one had similar issue. I was under impression that all the data in the new table will go to Active table when we activate the DSO.
Your inputs are highly appreciated.
Thanks
Krishna

What version of BW are you using? When editing your end-routine, a pop-up should display saying which fields you want populated/transferred from the end routine. This pop-up will not display if you are using a lower version of BW 7.x. To get around this, make sure that your newly added fields have a transformation rule type set to constant. This will make sure that the fields get populated when transferring from new to active tables.

Bapi : BAPI_ALM_ORDER_MAINTAIN not updating table AFVU-USR08

Hi,
I have a requirement to update table AFVU-USR08.I am actualy dealing with tcode IW32/IW33 where in we need to update operation-->enhancement tab.I am using BAPI : BAPI_ALM_ORDER_MAINTAIN to do this.I am testing the BAPI directly( Not called in any program ),I can see a message like so and so order saved under notification,But there is no entry in table AFVU-USR08.
If any one have come across this prob. and got the sol. Pl. share it with me.
Your solution will be more helpful.
Thanks,
Bharani.

Hi Ferry,
1. I have also tried ur given code before BAPI_TRANSACTION_COMMIT.
    l_fname = 'SOBKZ'.
    l_fvalue = 'U'.
    CALL FUNCTION 'CO_BH_MOD_SINGLE_FIELDS'
      EXPORTING
        aufnr_imp = wa_meth-objectkey(12)
        field1    = l_fname
        value1    = l_fvalue.
but this program is giving dump for only this particular Value saying that This is PROTECTED field.
Can anyone help me out on How to Update Special Stock Indicator on Components Tab of Maintenance Order (IW32).
If anyone has faced such type of problem & solved it then please let me also.
2. Which BADI to use for Updating Special Stock Indicator when we press enter on Components tab in Transaction IW32 ?..
Thanks in advance,
Hope to get the solution soon from all SAP gurus.
and help will be appriciated .
Gaurav.

Creating a better update table statement

Hello,
I have the following update table statement that I would like to make more effecient. This thing is taking forever. A little background. The source table/views are not indexed and the larger of the two only has 150k records. Any ideas on making more effecient would be appreciate.
Thanks.
Ryan
Script:
DECLARE
V_EID_CIV_ID SBI_EID_W_VALID_ANUM_V.SUBJECT_KEY%TYPE;
V_EID_DOE     DATE;
V_EID_POE     SBI_EID_W_VALID_ANUM_V.POINT_OF_ENTRY%TYPE;
V_EID_APPR_DATE DATE;
V_CASE_CIV_ID     SBI_DACS_CASE_RECORDS.CASE_EID_CIV_ID%TYPE;
V_CASE_DOE     DATE;
V_CASE_POE SBI_DACS_CASE_RECORDS.CASE_CODE_ENTRY_PLACE%TYPE;
V_CASE_APPR_DATE           DATE;
V_CASE_DEPART_DATE           DATE;
V_SBI_UPDATE_STEP SBI_DACS_CASE_RECORDS.SBI_UPDATE_STEP%TYPE;
V_SBI_CIV_ID SBI_DACS_CASE_RECORDS.SBI_CIV_ID%TYPE;
CURSOR VALID_CIV_ID_FROM_EID IS
     SELECT EID.SUBJECT_KEY,
          TO_DATE(EID.PROCESS_ENTRY_DATE),
          EID.POINT_OF_ENTRY,
          TO_DATE(EID.APPREHENSION_DATE),
          DACS.CASE_EID_CIV_ID,
          TO_DATE(DACS.CASE_DATE_OF_ENTRY,'YYYYMMDD'),
          DACS.CASE_CODE_ENTRY_PLACE,
          TO_DATE(DACS.CASE_DATE_APPR,'YYYYMMDD'),
          TO_DATE(DACS.CASE_DATE_DEPARTED,'YYYYMMDD'),
          DACS.SBI_UPDATE_STEP,
          DACS.SBI_CIV_ID
     FROM SBI_EID_W_VALID_ANUM_V EID,
SBI_DACS_CASE_RECORDS DACS
WHERE DACS.CASE_NBR_A = EID.ALIEN_FILE_NUMBER;
     BEGIN
          OPEN VALID_CIV_ID_FROM_EID;
SAVEPOINT A;
          LOOP
               FETCH VALID_CIV_ID_FROM_EID INTO V_EID_CIV_ID, V_EID_DOE, V_EID_POE,V_EID_APPR_DATE,V_CASE_CIV_ID, V_CASE_DOE,V_CASE_POE,V_CASE_APPR_DATE,V_CASE_DEPART_DATE,V_SBI_UPDATE_STEP,V_SBI_CIV_ID;
DBMS_OUTPUT.PUT_LINE('BEFORE');
               EXIT WHEN VALID_CIV_ID_FROM_EID%FOUND;
DBMS_OUTPUT.PUT_LINE('AFTER');
          UPDATE SBI_DACS_CASE_RECORDS
SET SBI_DACS_CASE_RECORDS.SBI_CIV_ID = V_CASE_CIV_ID,
               SBI_DACS_CASE_RECORDS.SBI_UPDATE_STEP = 1
WHERE V_CASE_CIV_ID IS NOT NULL
AND V_CASE_CIV_ID <> 0;
UPDATE SBI_DACS_CASE_RECORDS
          SET SBI_DACS_CASE_RECORDS.SBI_CIV_ID = V_EID_CIV_ID,
               SBI_DACS_CASE_RECORDS.SBI_UPDATE_STEP = 2
WHERE V_SBI_CIV_ID IS NULL AND V_SBI_UPDATE_STEP = 0
               AND V_EID_DOE = V_CASE_DOE
               AND V_EID_POE = V_CASE_POE
               AND V_EID_APPR_DATE = V_CASE_APPR_DATE
               AND V_EID_APPR_DATE = V_CASE_DEPART_DATE;
               UPDATE SBI_DACS_CASE_RECORDS
          SET SBI_DACS_CASE_RECORDS.SBI_CIV_ID = V_EID_CIV_ID,
               SBI_DACS_CASE_RECORDS.SBI_UPDATE_STEP = 3
WHERE V_SBI_UPDATE_STEP = 0
               AND V_EID_DOE = V_CASE_DOE
               AND V_EID_POE = V_CASE_POE
               AND V_EID_APPR_DATE = V_CASE_APPR_DATE;
UPDATE SBI_DACS_CASE_RECORDS
          SET SBI_DACS_CASE_RECORDS.SBI_CIV_ID = V_EID_CIV_ID,
               SBI_DACS_CASE_RECORDS.SBI_UPDATE_STEP = 4
WHERE V_SBI_UPDATE_STEP = 0
               AND V_EID_DOE = V_CASE_DOE
               AND V_EID_POE = V_CASE_POE
               AND (V_EID_APPR_DATE - V_CASE_APPR_DATE) > -4
               AND (V_EID_APPR_DATE - V_CASE_APPR_DATE) < 4 ;
     UPDATE SBI_DACS_CASE_RECORDS
          SET SBI_DACS_CASE_RECORDS.SBI_CIV_ID = V_EID_CIV_ID,
               SBI_DACS_CASE_RECORDS.SBI_UPDATE_STEP = 5
WHERE V_SBI_UPDATE_STEP = 0
               AND V_EID_DOE = V_CASE_DOE
               AND V_EID_POE <> V_CASE_POE
               AND V_EID_APPR_DATE = V_CASE_APPR_DATE;
UPDATE SBI_DACS_CASE_RECORDS
          SET SBI_DACS_CASE_RECORDS.SBI_CIV_ID = V_EID_CIV_ID,
               SBI_DACS_CASE_RECORDS.SBI_UPDATE_STEP = 6
WHERE V_SBI_UPDATE_STEP = 0
               AND V_EID_POE = V_CASE_POE
               AND V_EID_APPR_DATE = V_CASE_APPR_DATE;
UPDATE SBI_DACS_CASE_RECORDS
          SET SBI_DACS_CASE_RECORDS.SBI_CIV_ID = V_EID_CIV_ID,
               SBI_DACS_CASE_RECORDS.SBI_UPDATE_STEP = 7
WHERE V_SBI_UPDATE_STEP = 0
     AND V_EID_APPR_DATE = V_CASE_APPR_DATE;
          UPDATE SBI_DACS_CASE_RECORDS
          SET SBI_DACS_CASE_RECORDS.SBI_CIV_ID = V_EID_CIV_ID,
               SBI_DACS_CASE_RECORDS.SBI_UPDATE_STEP = 8
WHERE V_SBI_UPDATE_STEP = 0
AND V_EID_DOE = V_CASE_DOE
               AND (V_EID_APPR_DATE - V_CASE_APPR_DATE) > -4
               AND (V_EID_APPR_DATE - V_CASE_APPR_DATE) < 4;
               UPDATE SBI_DACS_CASE_RECORDS
          SET SBI_DACS_CASE_RECORDS.SBI_CIV_ID = V_EID_CIV_ID,
               SBI_DACS_CASE_RECORDS.SBI_UPDATE_STEP = 9
WHERE V_SBI_UPDATE_STEP = 0
AND V_EID_DOE = V_CASE_DOE
               AND V_EID_POE = V_CASE_POE;
          UPDATE SBI_DACS_CASE_RECORDS
          SET SBI_DACS_CASE_RECORDS.SBI_CIV_ID = V_EID_CIV_ID,
               SBI_DACS_CASE_RECORDS.SBI_UPDATE_STEP = 10
WHERE V_SBI_UPDATE_STEP = 0
AND (V_EID_APPR_DATE - V_CASE_APPR_DATE) > -4
               AND (V_EID_APPR_DATE - V_CASE_APPR_DATE) < 4;
          END LOOP;
          CLOSE VALID_CIV_ID_FROM_EID;
     COMMIT;
     END;
-----Thats it. Thanks for your help.
Ryan

Please use [ code] or [ pre] tags to format code before posing:
DECLARE
     V_EID_CIV_ID SBI_EID_W_VALID_ANUM_V.SUBJECT_KEY%TYPE;
     V_EID_DOE DATE;
     V_EID_POE SBI_EID_W_VALID_ANUM_V.POINT_OF_ENTRY%TYPE;
     V_EID_APPR_DATE DATE;
     V_CASE_CIV_ID SBI_DACS_CASE_RECORDS.CASE_EID_CIV_ID%TYPE;
     V_CASE_DOE DATE;
     V_CASE_POE SBI_DACS_CASE_RECORDS.CASE_CODE_ENTRY_PLACE%TYPE;
     V_CASE_APPR_DATE DATE;
     V_CASE_DEPART_DATE DATE;
     V_SBI_UPDATE_STEP SBI_DACS_CASE_RECORDS.SBI_UPDATE_STEP%TYPE;
     V_SBI_CIV_ID SBI_DACS_CASE_RECORDS.SBI_CIV_ID%TYPE;
     CURSOR VALID_CIV_ID_FROM_EID IS
          SELECT EID.SUBJECT_KEY,
           TO_DATE(EID.PROCESS_ENTRY_DATE),
           EID.POINT_OF_ENTRY,
           TO_DATE(EID.APPREHENSION_DATE),
           DACS.CASE_EID_CIV_ID,
           TO_DATE(DACS.CASE_DATE_OF_ENTRY,'YYYYMMDD'),
           DACS.CASE_CODE_ENTRY_PLACE,
           TO_DATE(DACS.CASE_DATE_APPR,'YYYYMMDD'),
           TO_DATE(DACS.CASE_DATE_DEPARTED,'YYYYMMDD'),
           DACS.SBI_UPDATE_STEP,
           DACS.SBI_CIV_ID
          FROM SBI_EID_W_VALID_ANUM_V EID,
           SBI_DACS_CASE_RECORDS DACS
          WHERE DACS.CASE_NBR_A = EID.ALIEN_FILE_NUMBER;
BEGIN
     OPEN VALID_CIV_ID_FROM_EID;
     SAVEPOINT A;
LOOP
     FETCH VALID_CIV_ID_FROM_EID INTO V_EID_CIV_ID, V_EID_DOE,
          V_EID_POE,V_EID_APPR_DATE,V_CASE_CIV_ID, V_CASE_DOE,
               V_CASE_POE,V_CASE_APPR_DATE,V_CASE_DEPART_DATE,V_SBI_UPDATE_STEP,V_SBI_CIV_ID;
     DBMS_OUTPUT.PUT_LINE('BEFORE');
     EXIT WHEN VALID_CIV_ID_FROM_EID%FOUND;
     DBMS_OUTPUT.PUT_LINE('AFTER');
     UPDATE SBI_DACS_CASE_RECORDS
      SET SBI_DACS_CASE_RECORDS.SBI_CIV_ID = V_CASE_CIV_ID,
       SBI_DACS_CASE_RECORDS.SBI_UPDATE_STEP = 1
     WHERE V_CASE_CIV_ID IS NOT NULL
      AND V_CASE_CIV_ID <> 0;
     UPDATE SBI_DACS_CASE_RECORDS
      SET SBI_DACS_CASE_RECORDS.SBI_CIV_ID = V_EID_CIV_ID,
       SBI_DACS_CASE_RECORDS.SBI_UPDATE_STEP = 2
     WHERE V_SBI_CIV_ID IS NULL AND V_SBI_UPDATE_STEP = 0
      AND V_EID_DOE = V_CASE_DOE
       AND V_EID_POE = V_CASE_POE
        AND V_EID_APPR_DATE = V_CASE_APPR_DATE
         AND V_EID_APPR_DATE = V_CASE_DEPART_DATE;
     UPDATE SBI_DACS_CASE_RECORDS
      SET SBI_DACS_CASE_RECORDS.SBI_CIV_ID = V_EID_CIV_ID,
       SBI_DACS_CASE_RECORDS.SBI_UPDATE_STEP = 3
     WHERE V_SBI_UPDATE_STEP = 0
      AND V_EID_DOE = V_CASE_DOE
       AND V_EID_POE = V_CASE_POE
        AND V_EID_APPR_DATE = V_CASE_APPR_DATE;
     UPDATE SBI_DACS_CASE_RECORDS
      SET SBI_DACS_CASE_RECORDS.SBI_CIV_ID = V_EID_CIV_ID,
       SBI_DACS_CASE_RECORDS.SBI_UPDATE_STEP = 4
     WHERE V_SBI_UPDATE_STEP = 0
      AND V_EID_DOE = V_CASE_DOE
       AND V_EID_POE = V_CASE_POE
        AND (V_EID_APPR_DATE - V_CASE_APPR_DATE) > -4
         AND (V_EID_APPR_DATE - V_CASE_APPR_DATE) < 4 ;
     UPDATE SBI_DACS_CASE_RECORDS
      SET SBI_DACS_CASE_RECORDS.SBI_CIV_ID = V_EID_CIV_ID,
       SBI_DACS_CASE_RECORDS.SBI_UPDATE_STEP = 5
     WHERE V_SBI_UPDATE_STEP = 0
      AND V_EID_DOE = V_CASE_DOE
       AND V_EID_POE <> V_CASE_POE
        AND V_EID_APPR_DATE = V_CASE_APPR_DATE;
     UPDATE SBI_DACS_CASE_RECORDS
      SET SBI_DACS_CASE_RECORDS.SBI_CIV_ID = V_EID_CIV_ID,
       SBI_DACS_CASE_RECORDS.SBI_UPDATE_STEP = 6
     WHERE V_SBI_UPDATE_STEP = 0
      AND V_EID_POE = V_CASE_POE
       AND V_EID_APPR_DATE = V_CASE_APPR_DATE;
     UPDATE SBI_DACS_CASE_RECORDS
      SET SBI_DACS_CASE_RECORDS.SBI_CIV_ID = V_EID_CIV_ID,
       SBI_DACS_CASE_RECORDS.SBI_UPDATE_STEP = 7
     WHERE V_SBI_UPDATE_STEP = 0
      AND V_EID_APPR_DATE = V_CASE_APPR_DATE;
     UPDATE SBI_DACS_CASE_RECORDS
      SET SBI_DACS_CASE_RECORDS.SBI_CIV_ID = V_EID_CIV_ID,
       SBI_DACS_CASE_RECORDS.SBI_UPDATE_STEP = 8
     WHERE V_SBI_UPDATE_STEP = 0
      AND V_EID_DOE = V_CASE_DOE
       AND (V_EID_APPR_DATE - V_CASE_APPR_DATE) > -4
        AND (V_EID_APPR_DATE - V_CASE_APPR_DATE) < 4;
     UPDATE SBI_DACS_CASE_RECORDS
      SET SBI_DACS_CASE_RECORDS.SBI_CIV_ID = V_EID_CIV_ID,
       SBI_DACS_CASE_RECORDS.SBI_UPDATE_STEP = 9
     WHERE V_SBI_UPDATE_STEP = 0
      AND V_EID_DOE = V_CASE_DOE
       AND V_EID_POE = V_CASE_POE;
     UPDATE SBI_DACS_CASE_RECORDS
      SET SBI_DACS_CASE_RECORDS.SBI_CIV_ID = V_EID_CIV_ID,
       SBI_DACS_CASE_RECORDS.SBI_UPDATE_STEP = 10
     WHERE V_SBI_UPDATE_STEP = 0
      AND (V_EID_APPR_DATE - V_CASE_APPR_DATE) > -4
       AND (V_EID_APPR_DATE - V_CASE_APPR_DATE) < 4;
END LOOP;
CLOSE VALID_CIV_ID_FROM_EID;
COMMIT;
END;Peter D.

Update table a columns using columns from table b (values of 2 columns of table b need to taken from table c)

Guys,
I need to update table A columns col3, col4, col5 and col6 by table b columns col3, col4, col5 and col6 however table b col5 and col6 values need to come from table c col1.
Means table b col5 and col6 have values in it however i need to replace them with value from table c col1 and need to update table a col5 and col6 accordingly.
table a and table b has col1 and col2 in common.
i am trying something like this.
Update a
a.col3 = b.col3,
a.col4 = b.col4,
a.col5 = (select col1 from table_c c where c.col2=b.col5),
a.col6 = (select col1 from table_c c where c.col2=b.col6)
from table_A a inner join table_b
on a.col1=b.col1 and a.col2=b.col2
can someone help me reframe above update query?
thanks in advance for your help.

Try the below:(If you have multiple values, then you may need to use TOP 1 as commented code in the below script)
create Table tableA(Col1 int,Col2 int,Col3 int,Col4 int,Col5 int,Col6 int)
Insert into tableA values(1,2,3,4,5,6)
create Table tableB(Col1 int,Col2 int,Col3 int,Col4 int,Col5 int,Col6 int)
Insert into tableB values(1,2,30,40,50,60)
create Table tableC(Col1 int,Col2 int,Col3 int,Col4 int,Col5 int,Col6 int)
Insert into tableC values(100,50,30,40,2,2)
--Insert into tableC values(200,50,30,40,2,2)
Insert into tableC values(100,60,30,40,2,2)
Select * From tablea
Update a Set
a.col3 = b.col3,
a.col4 = b.col4,
a.col5 = (select col1 from tablec c where c.col2=b.col5 ),
a.col6 = (select col1 from tablec c where c.col2=b.col6 )
from tableA a inner join tableb b
on a.col1=b.col1 and a.col2=b.col2
--Update a Set
--a.col3 = b.col3,
--a.col4 = b.col4,
--a.col5 = (select Top 1 col1 from tablec c where c.col2=b.col5 Order by c.Col1 asc),
--a.col6 = (select Top 1 col1 from tablec c where c.col2=b.col6 Order by c.Col1 asc)
--from tableA a inner join tableb b
--on a.col1=b.col1 and a.col2=b.col2
Select * From tablea
Drop table tablea,Tableb,TableC

How to align a String value to the right side inside a table column?

Hi,
I have a text view inside a table column which is mapped to a string attribute. I need to align the text in the text view to the right hand inside the table column. But its always getting aligned towards the left side. I have tried by setting the <b>hAlign</b> property of Element properties of Text View to <b>right / forced right</b> but still the text is getting aligned to the left side.
How do I align the String values in Text View towards the right hand side inside a Table Column?
Thanks and Regards,
Sayan Ghosh

Hello Sayan,
if i do get it right, you are adding an TextView element to a Table Cell. Then you should consider setting aligment within the particular cell. By calling:
YourCell.setHorizontalAlignment(CellHAlign.RIGHT)
regards.
mz

SID in Update Table of DSO

Similar Messages

Maybe you are looking for