Siebdev.exe - Can I run this in batch mode?
Just so you are aware, I know nothing about siebel. However, in conjuction with a siebel developer who should know; we are trying to invoke siebdev.exe from a CIB server (jenkins specifically).
However, running the /batchimport option appears to launch a gui; which I'm fairly sure is causing the app to fail via the jenkins batch job on a windows server (we get an event log application fial)
Can anyone tell me iif it is posisble to run siebdev.exe silently? or at least so it doesnt fire up the gui?
Appreciate any help that you can offer.
Many thanks
dD
so, further to this
I setup a windows schedule job, and that appears to run the job fine.
However, this runs as my admin account rather than as the service (which doesnt have admin access rights to the machine).....
Do I need admin rights to run this?
dD
Similar Messages
-
I have an old file that was made by macromedia flash,but I can't run this file in my Windows 7 64-bit ,while I can run it in Windows XP 32-bit
Hi momi macrom,
Have moved your post to the Flash forum. Experts here are better placed to help you.
Thanks,
Preran -
How can i run this code correctly?
hello, everybody:
when i run the code, i found that it dons't work,so ,i hope somebody can help me!
the Ball class is this :
package {
import flash.display.Sprite;
[SWF(width = "550", height = "400")]
public class Ball extends Sprite {
private var radius:Number;
private var color:uint;
private var vx:Number;
private var vy:Number;
public function Ball(radius:Number=40, color:uint=0xff9900,
vx:Number =0, vy:Number =0) {
this.radius= radius;
this.color = color;
this.vx = vx;
this.vy = vy;
init();
private function init():void {
graphics.beginFill(color);
graphics.drawCircle(0,0,radius);
graphics.endFill();
and the Chain class code is :
package {
import flash.display.Sprite;
import flash.events.Event;
[SWF(width = "550", height = "400")]
public class Chain extends Sprite {
private var ball0:Ball;
private var ball1:Ball;
private var ball2:Ball;
private var spring:Number = 0.1;
private var friction:Number = 0.8;
private var gravity:Number = 5;
//private var vx:Number =0;
//private var vy:Number = 0;
public function Chain() {
init();
public function init():void {
ball0 = new Ball(20);
addChild(ball0);
ball1 = new Ball(20);
addChild(ball1);
ball2 = new Ball(20);
addChild(ball2);
addEventListener(Event.ENTER_FRAME, onEnterFrame);
private function onEnterFrame(event:Event):void {
moveBall(ball0, mouseX, mouseY);
moveBall(ball1, ball0.x, ball0.y);
moveBall(ball2, ball1.x, ball1.y);
graphics.clear();
graphics.lineStyle(1);
graphics.moveTo(mouseX, mouseY);
graphics.lineTo(ball0.x, ball0.y);
graphics.lineTo(ball1.x, ball1.y);
graphics.lineTo(ball2.x, ball2.y);
private function moveBall(ball:Ball,
targetX:Number,
targetY:Number):void {
ball.vx += (targetX - ball.x) * spring;
ball.vy += (targetY - ball.y) * spring;
ball.vy += gravity;
ball.vx *= friction;
ball.vy *= friction;
ball.x += vx;
ball.y += vy;
thanks every body's help!ok, thanks for your reply ! I run this code in the Flex builder 3!and the Ball class and the Chain class are all in the same AS project!
and i changed the ball.pv property as public in the Ball class, and the Chain class has no wrong syntactic analysis,but the AS code don't run.so this is the problem.
2010-04-21
Fang
发件人: Ned Murphy <[email protected]>
发送时间: 2010-04-20 23:01
主 题: how can i run this code correctly?
收件人: fang alvin <[email protected]>
I don't see that the Ball class has a pv property, or that you even try to access a pv property in the Chain class. All of the properties in your Ball class are declared as private, so you probably cannot access them directly. They would need to be public. Also, I still don't see where you import Ball in the chain class such that it can use it. -
I keep getting message "This page requires a plugin that can only run in 32 bit mode" what does this mean and how can I fix it? It seems to come up randomly, but I'm fairly ignorant.
Previous versions of Firefox were only 32 bit, Firefox 4 for the Mac contains 32 and 64 bit versions. If you want to always start Firefox in 32 bit mode, open up Finder and go to the Applications folder. Control-click the Firefox app and click "Get Info", then select the "Open in 32-bit mode" option.
-
I developed app in mac 10.6.8 with xcode 3.2.6.how can i run this app in ipad device
i developed app in mac 10.6.8 with xcode 3.2.6.how can i run this app in ipad device
actually i planned to get provisioning profiles from apple by paying 99$ in following website
https://developer.apple.com/programs/start/ios/ and followed by
https://developer.apple.com/programs/start/standard/.
but in last link,following thing were mentioned at bottom -
Technical Requirements
You must have an Intel-based Mac running OS X 10.8 Mountain Lion or later to develop and distribute iOS apps and Mac apps.
but i\m using mac running OS X 10.6.8 snow leopard.
Doubt:can't i run my app in ipad device?\
Thank's in advance.. -
How can i run this query in BI Answers
Hi,
pls tell me how can i run this sql statement in BI Answers....???
select abc_date,abc_asset_desc,sum(nvl(abc_market_val_lcy,0)+nvl(abc_accr_lcy,0)) "total balance" from abc
group by abc_date,abc_asset_desc;any help would be appriciated.... :-)
RegardsStrange question this one.
normally with Answers you pick the columns you want to report on and the BI server will construct the SQL for you.
In this example you would need a star with the abc dimension logical table and a logical fact for abc (these can be in the same table), which has a calculated field for 'Total Balance'.
You then pick the columns you require and Answer and the BI will automatically add the group by.
Adrian
Majendi -
In the development center we use Labview 6.01, in the testcenter we use labview 5.
Additionally, in the development center we use a unix version of Labview and in the testcenter a Windows version.You can Save with Option to save VIs as version 5.
Unless your VIs deal with system files in UNIX or Windows (ie. Registry...)
then you have to develop your VI specificly on that OS, since UNIX and
Windows have different ways to deal with system files. Mostly, LabVIEW is OS
independent. I used to have VIs developed from LabVIEW v.3 on UNIX, I can
still open these files from LV v.4 on Windows. Now I can still work with
these VIs on LV 6 on Windows.
Good luck,
Nam.
roybra wrote in message
news:[email protected]..
> I created an application on a machine with Labview 6.01, can I run
> this application on another machine that has labview 5?
>
> In the development center we use Labview 6.01, in the testcenter we
> use l
abview 5.
>
> Additionally, in the development center we use a unix version of
> Labview and in the testcenter a Windows version. -
getting a message that I can't run this app on my PC and to contact the pulisher to get a version that I can ru
Which Adobe product?
Which operating system? -
Error message says "This page requires a plugin that can only run in 32-bit mode"
When I try to write an email from my BT site I get the following message
"This page requires a plugin that can only run in 32-bit mode"
Then there's a link to restart the page in 32-bit mode. However, it resets to whole page, drags things back out the trash.
I have only had this problem since updating to the latest FirefoxPrevious versions of Firefox were only 32 bit, Firefox 4 for the Mac contains 32 and 64 bit versions. If you want to always start Firefox in 32 bit mode, open up Finder and go to the Applications folder. Control-click the Firefox app and click "Get Info", then select the "Open in 32-bit mode" option.
-
Can't Run program in Debug Mode
To: [email protected]
cc:
Subject: Can't Run program in Debug Mode
Has anyone else experienced this problem? We have written a non-express
program that uses the Express generated services project as a supplier
plan. However, when we try running this program in debug mode about 50%
(or more) of the time we abend while Forte is trying to partition the
application. Since we have many database classes in our Business Model we
are wondering if Forte is timing out during the partition phase or if the
server partition is running out of memory . The following error messages
are produced by Forte. Any suggestions???
=======================
Error messages on client:
=======================
SYSTEM ERROR: Unable to start the partition testacadprogoffer_CL0_Part1 on
any
of the nodes to which it has been assigned. See the remainder of the
error
stack for more information.
Class: qqsp_ResourceException
Error #: [1602, 593]
Detected at: qqcf_StandardConfig::LoadRemotePartition at 5
Last TOOL statement: method overview.StartApplication
Error Time: Tue Dec 02 12:56:01
Exception occurred (locally) on partition "Express_cl7_Client",
(partitionId = F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3,
taskId =
[F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3.226]) in application
"FTLaunch_cl0", pid 65 on node DWILBUR_NTWS in environment
CentralEnv.
SYSTEM ERROR: Unable to start partition testacadprogoffer_CL0_Part1 on node
admin2.
Class: qqsp_ErrorDescriptor
Error #: [1602, 592]
Detected at: qqcf_StandardConfig::LoadRemotePartition at 3
Error Time: Tue Dec 02 12:56:01
Exception occurred (locally) on partition "Express_cl7_Client",
(partitionId = F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3,
taskId =
[F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3.226]) in application
"FTLaunch_cl0", pid 65 on node DWILBUR_NTWS in environment
CentralEnv.
SYSTEM ERROR: Lost contact with remote server while trying to load
partition
testacadprogoffer_CL0_Part1. Check server log file for more information
about
the specific problem.
Class: qqsp_ResourceException
Error #: [1301, 102]
Detected at: qqem_IPartitionAgent::Startup at 5
Error Time: Tue Dec 02 12:56:01
Exception occurred (locally) on partition "Express_cl7_Client",
(partitionId = F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3,
taskId =
[F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3.226]) in application
"FTLaunch_cl0", pid 65 on node DWILBUR_NTWS in environment
CentralEnv.
INFORMATION: The connection to the partner was terminated by the
Communication
Manager for the reasons below.
Class: qqsp_DistAccessException
Detected at: qqdo_PartitionMgr::StopLocation at 1
Error Time: Tue Dec 02 12:56:00
Distributed method called: qqrt_ForteExecAgentProxy.LoadPartition!6
(object name Unnamed) from partition "Forte_Executor", (partitionId =
F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9, taskId =
[F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9.229]) in application
"FTLaunch_cl0", pid 65 on node DWILBUR_NTWS in environment CentralEnv
Exception occurred (locally) on partition "Express_cl7_Client",
(partitionId = F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3,
taskId =
[F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3.226]) in application
"FTLaunch_cl0", pid 65 on node DWILBUR_NTWS in environment
CentralEnv.
INFORMATION: Network partner closed connection. This usually means the
process at the other end of the wire failed. Please go look there and
find
out why.
Class: qqsp_DistAccessException
Detected at: qqcm_HoseFSM::ReceivedClose at 2
Error Time: Tue Dec 02 12:56:00
Exception occurred (locally) on partition "Express_cl7_Client",
(partitionId = F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3,
taskId =
[F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3.226]) in application
"FTLaunch_cl0", pid 65 on node DWILBUR_NTWS in environment
CentralEnv.
INFORMATION: Received close: Connection aborted (10053).
Class: qqsp_DistAccessException
Detected at: qqcm_HoseFSM::ReceivedClose at 1
Error Time: Tue Dec 02 12:56:00
Exception occurred (locally) on partition "Express_cl7_Client",
(partitionId = F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3,
taskId =
[F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3.226]) in application
"FTLaunch_cl0", pid 65 on node DWILBUR_NTWS in environment
CentralEnv.
=======================
Log messages on server:
=======================
Attached to manager for node admin2.
aud Tue Dec 2 09:34:36 : Loading partition testacadprogoffer_cl0_Part2
built on <unknown>.
Attached to manager for node admin2.
aud Tue Dec 2 09:41:58 : Shutting down partition as requested.
aud Tue Dec 2 09:41:59 : Unloaded partition testacadprogoffer_cl0_Part2.
aud Tue Dec 2 09:49:44 : Loading partition testacadprogoffer_cl0_Part2
built on <unknown>.
Attached to manager for node admin2.
aud Tue Dec 2 10:00:11 : Shutting down partition as requested.
aud Tue Dec 2 10:00:12 : Unloaded partition testacadprogoffer_cl0_Part2.
aud Tue Dec 2 10:18:34 : Loading partition testacadprogoffer_cl0_Part3
built on <unknown>.
Attached to manager for node admin2.
aud Tue Dec 2 10:27:00 : Shutting down partition as requested.
aud Tue Dec 2 10:27:00 : Unloaded partition testacadprogoffer_cl0_Part3.
aud Tue Dec 2 10:47:03 : Loading partition
EvaluateApplRequirementsBO_CL0_Part1 built on <unknown>.
Attached to manager for node admin2.
aud Tue Dec 2 11:09:26 : Shutting down partition due to failure of agent
owner's partition.
aud Tue Dec 2 11:09:26 : Shutting down partition as requested.
aud Tue Dec 2 11:09:26 : Unloaded partition
EvaluateApplRequirementsBO_CL0_Part1.
aud Tue Dec 2 12:36:14 : Loading partition testacadprogoffer_CL0_Part1
built on <unknown>.
Attached to manager for node admin2.
aud Tue Dec 2 12:45:17 : Shutting down partition as requested.
aud Tue Dec 2 12:45:17 : Unloaded partition testacadprogoffer_CL0_Part1.
FATAL ERROR: Out of Memory (reason = qqOS_MM_EX_OUT_OF_MEMORY)
FATAL ERROR: Out of Memory (reason = qqOS_MM_EX_OUT_OF_MEMORY)
Task 11: qqcm_HoseRecvServiceTask::Run: Caught unexpected exception
FATAL ERROR: ************* Out of Memory, requested (1K) available (0K)
Class: qqsp_ResourceException with ReasonCode: SP_ER_OUTOFMEMORY
Detected at: qqos_MemoryManager
Error Time: Tue Dec 2 12:49:01
Exception occurred (locally) on partition "Forte_Executor",
(partitionId = F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10f3, t
askId = [F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10f3.11]) in application
"Forte Runtime", pid 14020 on node admin2 in environ
ment CentralEnv.
FATAL ERROR: ************* Out of Memory, requested (1K) available (0K)
Class: qqsp_ResourceException with ReasonCode: SP_ER_OUTOFMEMORY
Detected at: qqos_MemoryManager
Error Time: Tue Dec 2 12:48:57
FATAL ERROR: Out of Memory (reason = qqOS_MM_EX_OUT_OF_MEMORY)
FATAL ERROR: Out of Memory (reason = qqOS_MM_EX_OUT_OF_MEMORY)
ERROR: TMgr.RunThread: task cm.Recv failed terminating.
Probably caused by a FATAL exception.
David Wilbur email: [email protected]
University of Windsor phone: 519-253-3000 ext. 2779
Windsor, Ontario Canada
-----------------------------------------------Hi,
We have had the same problem in a non-express application
with a heavy server partition. In our case, the error was not
systematic, depending on the server workload at the time we
tried to partition and run.
The work-around we're using is to put the -fm flags (increasing the x
parameter to say 30000) in the 'server arguments' of your server
partition
properties in the partition workshop. Note that if your server is a Unix
platform,
you need to put double-quotes before and after the parenthesis in the -fm
syntax.
Hope this helps,
Vincent Figari
BTW, what Forte version are you using ?
On Tue, 2 Dec 1997 13:44:24 -0500 "David Wilbur"<[email protected]>
writes:
>
>
>
>
>
To: [email protected]
cc:
Subject: Can't Run program in Debug Mode
Has anyone else experienced this problem? We have written a
non-express
program that uses the Express generated services project as a supplier
plan. However, when we try running this program in debug mode about
50%
(or more) of the time we abend while Forte is trying to partition the
application. Since we have many database classes in our Business
Model we
are wondering if Forte is timing out during the partition phase or if
the
server partition is running out of memory . The following error
messages
are produced by Forte. Any suggestions???
=======================
Error messages on client:
=======================
SYSTEM ERROR: Unable to start the partition
testacadprogoffer_CL0_Part1 on
any
of the nodes to which it has been assigned. See the remainder of
the
error
stack for more information.
Class: qqsp_ResourceException
Error #: [1602, 593]
Detected at: qqcf_StandardConfig::LoadRemotePartition at 5
Last TOOL statement: method overview.StartApplication
Error Time: Tue Dec 02 12:56:01
Exception occurred (locally) on partition "Express_cl7_Client",
(partitionId = F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3,
taskId =
[F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3.226]) in
application
"FTLaunch_cl0", pid 65 on node DWILBUR_NTWS in environment
CentralEnv.
SYSTEM ERROR: Unable to start partition testacadprogoffer_CL0_Part1 on
node
admin2.
Class: qqsp_ErrorDescriptor
Error #: [1602, 592]
Detected at: qqcf_StandardConfig::LoadRemotePartition at 3
Error Time: Tue Dec 02 12:56:01
Exception occurred (locally) on partition "Express_cl7_Client",
(partitionId = F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3,
taskId =
[F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3.226]) in
application
"FTLaunch_cl0", pid 65 on node DWILBUR_NTWS in environment
CentralEnv.
SYSTEM ERROR: Lost contact with remote server while trying to load
partition
testacadprogoffer_CL0_Part1. Check server log file for more
information
about
the specific problem.
Class: qqsp_ResourceException
Error #: [1301, 102]
Detected at: qqem_IPartitionAgent::Startup at 5
Error Time: Tue Dec 02 12:56:01
Exception occurred (locally) on partition "Express_cl7_Client",
(partitionId = F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3,
taskId =
[F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3.226]) in
application
"FTLaunch_cl0", pid 65 on node DWILBUR_NTWS in environment
CentralEnv.
INFORMATION: The connection to the partner was terminated by the
Communication
Manager for the reasons below.
Class: qqsp_DistAccessException
Detected at: qqdo_PartitionMgr::StopLocation at 1
Error Time: Tue Dec 02 12:56:00
Distributed method called:
qqrt_ForteExecAgentProxy.LoadPartition!6
(object name Unnamed) from partition "Forte_Executor",
(partitionId =
F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9, taskId =
[F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9.229]) in
application
"FTLaunch_cl0", pid 65 on node DWILBUR_NTWS in environment
CentralEnv
Exception occurred (locally) on partition "Express_cl7_Client",
(partitionId = F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3,
taskId =
[F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3.226]) in
application
"FTLaunch_cl0", pid 65 on node DWILBUR_NTWS in environment
CentralEnv.
INFORMATION: Network partner closed connection. This usually means
the
process at the other end of the wire failed. Please go look there
and
find
out why.
Class: qqsp_DistAccessException
Detected at: qqcm_HoseFSM::ReceivedClose at 2
Error Time: Tue Dec 02 12:56:00
Exception occurred (locally) on partition "Express_cl7_Client",
(partitionId = F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3,
taskId =
[F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3.226]) in
application
"FTLaunch_cl0", pid 65 on node DWILBUR_NTWS in environment
CentralEnv.
INFORMATION: Received close: Connection aborted (10053).
Class: qqsp_DistAccessException
Detected at: qqcm_HoseFSM::ReceivedClose at 1
Error Time: Tue Dec 02 12:56:00
Exception occurred (locally) on partition "Express_cl7_Client",
(partitionId = F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3,
taskId =
[F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3.226]) in
application
"FTLaunch_cl0", pid 65 on node DWILBUR_NTWS in environment
CentralEnv.
=======================
Log messages on server:
=======================
Attached to manager for node admin2.
aud Tue Dec 2 09:34:36 : Loading partition
testacadprogoffer_cl0_Part2
built on <unknown>.
Attached to manager for node admin2.
aud Tue Dec 2 09:41:58 : Shutting down partition as requested.
aud Tue Dec 2 09:41:59 : Unloaded partition
testacadprogoffer_cl0_Part2.
aud Tue Dec 2 09:49:44 : Loading partition
testacadprogoffer_cl0_Part2
built on <unknown>.
Attached to manager for node admin2.
aud Tue Dec 2 10:00:11 : Shutting down partition as requested.
aud Tue Dec 2 10:00:12 : Unloaded partition
testacadprogoffer_cl0_Part2.
aud Tue Dec 2 10:18:34 : Loading partition
testacadprogoffer_cl0_Part3
built on <unknown>.
Attached to manager for node admin2.
aud Tue Dec 2 10:27:00 : Shutting down partition as requested.
aud Tue Dec 2 10:27:00 : Unloaded partition
testacadprogoffer_cl0_Part3.
aud Tue Dec 2 10:47:03 : Loading partition
EvaluateApplRequirementsBO_CL0_Part1 built on <unknown>.
Attached to manager for node admin2.
aud Tue Dec 2 11:09:26 : Shutting down partition due to failure of
agent
owner's partition.
aud Tue Dec 2 11:09:26 : Shutting down partition as requested.
aud Tue Dec 2 11:09:26 : Unloaded partition
EvaluateApplRequirementsBO_CL0_Part1.
aud Tue Dec 2 12:36:14 : Loading partition
testacadprogoffer_CL0_Part1
built on <unknown>.
Attached to manager for node admin2.
aud Tue Dec 2 12:45:17 : Shutting down partition as requested.
aud Tue Dec 2 12:45:17 : Unloaded partition
testacadprogoffer_CL0_Part1.
FATAL ERROR: Out of Memory (reason = qqOS_MM_EX_OUT_OF_MEMORY)
FATAL ERROR: Out of Memory (reason = qqOS_MM_EX_OUT_OF_MEMORY)
Task 11: qqcm_HoseRecvServiceTask::Run: Caught unexpected exception
FATAL ERROR: ************* Out of Memory, requested (1K) available
(0K)
Class: qqsp_ResourceException with ReasonCode: SP_ER_OUTOFMEMORY
Detected at: qqos_MemoryManager
Error Time: Tue Dec 2 12:49:01
Exception occurred (locally) on partition "Forte_Executor",
(partitionId = F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10f3, t
askId = [F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10f3.11]) in
application
"Forte Runtime", pid 14020 on node admin2 in environ
ment CentralEnv.
FATAL ERROR: ************* Out of Memory, requested (1K) available
(0K)
Class: qqsp_ResourceException with ReasonCode:
SP_ER_OUTOFMEMORY
Detected at: qqos_MemoryManager
Error Time: Tue Dec 2 12:48:57
FATAL ERROR: Out of Memory (reason = qqOS_MM_EX_OUT_OF_MEMORY)
FATAL ERROR: Out of Memory (reason = qqOS_MM_EX_OUT_OF_MEMORY)
ERROR: TMgr.RunThread: task cm.Recv failed terminating.
Probably caused by a FATAL exception.
David Wilbur email: [email protected]
University of Windsor phone: 519-253-3000 ext. 2779
Windsor, Ontario Canada -
Satellite L300D-11V: can I run SSD in AHCI mode?
Hi,
I've just installed an SSD and Win7 64bit on a L300D-11V laptop.
Does anyone know if it is possible to run this in AHCI mode as I can't see the option in the BIOS?
I see there is a BIOS update but if this doesn't update to enable AHCI I'd rather not bother...Hi
I presume it should be possible to use the SSD drive with AHCI enabled mode.
The AHCI means that the HDD or SSD would run with SATA performance but for that you will need to install the SATA driver firstly.
If SATA mode would be set to compatible mode then a SATA driver is not necessary to install the Windows OS.
Simply said;
- you dont need SATA drivers using compatible mode
- you need SATA drivers using AHCI mode
The SATA drivers are a part of the Intel Storage Manager and you could download this from Toshiba European driver or Intel page -
Mountain Lion broke vectordesigner 1.7.0. Can I run it in compatibility mode to Lion?
Hi,
if anyone could help? Mountain Lion broke vectordesigner 1.7.0. Can I run it in compatibility mode to Lion?
I can not update to version 1.7.3 because it has been removed from the app store.
Regards
SteffanThere isn't a "compatibility" mode.
According to Roaring Apps compatibility table, neither version works with Mountaion Lion.
http://roaringapps.com/apps:table/tags/_v/index_tags/_v -
How many computers can I run this software on?
The laptop I am currently using is dying. Can I install this on a new computer?
Thanks for your help, but the drop down window you posted is nothing like mine. I am running windows 7, 64 bit. I am calling Adobe support tomorrow. My desktop dies completely and I lost Adobe Pro 9 and CS4 before I could deactivate them. I've read that Adobe will deactivate them for me when this happens. I'll ask about the Elements 10 too when I talk to them.
My laptop is experiencing the same problems as my desktop was, so I know it is only a matter of time before it's gone too. I have Acrobat pro 10 on it, which I can deactivate. If Adobe deactivates Pro 9 and CS4, they'll go on another desktop, which is my workstation, when I get one . BTW, I tried to take a screen shot of my menu, but Adobe will not allow me to, so I can't show you what I was seeing.
Again, thanks for everything. -
I can't run this example in flashbuilder4
hello. i'm newbie so i read some example flex, but i'm usually meet error. for example this:
http://share.megaplus.vn/dl.php/2062988. i know it is flex3 file,but in flashbuilder 4 have support trasition automatic flex3 to flashbuilder4
i can't run it in flashbuilder4 and if i want it run , how do i make?
please help me. ThanksHi Phuong,
Have you tried the horizontal scrollbar at the bottom of the sample. If you slide that back and forth, the carousel will spin around. You can also click on any thumbnail in the carousel to spin it to make that the active selection.
Cheers,
Maile -
Enable-MSDSMAutomaticClaim can't run this silently?
Hi,
I am trying to run the following command however, it always asks for a confirmation, but I am trying to run this in a script for automated configuration. is there any way i can run this "silently" which will accept the Yes or All confirmation?
Enable-MSDSMAutomaticClaim –BusType iSCSI
thanks
SteveHi,
This appeared to work when I ran it as a command (both approaches whether it be separate lines or all in one) however, when i ran it as part of a script it still prompted me for an answer. I am therefore rather confused as to why it would work as a command
but not in a script. You would have thought all commands which require an answer would include a -Confirm parameter but this appears to not have one.
Steve
It appears the documentation is a little sloppy.
According to this:
http://chinnychukwudozie.com/2013/11/11/configuring-multipath-io-with-multiple-iscsi-connections-using-powershell/
That's actually a function, not a cmdlet. And it appears they've not provided a parameter for Confirm.
[string](0..33|%{[char][int](46+("686552495351636652556262185355647068516270555358646562655775 0645570").substring(($_*2),2))})-replace " "
Maybe you are looking for
-
Update of write optimized DSO by csv file
Hi Gurus, I have observed few things while trying to upload a write optimized (WO) DSO from a flat file in BI 7.0. The data flow is as follows: data source -> transformation -> data target (DSO - WO). from a test perspective, i have updated 5 records
-
WRT54GS Changeover from Wired to Wireless (Vista): Duck Soup!
I've owned my WRT54GS router for nearly three years and had initially bought it as a wired router (with an option to go secured wireless later), but I'm used to thinking that wireless was primarily for laptops and notebooks (even though I've actually
-
How do I speed up searching in itunes 11?
I have 90,000+ songs and it took almost 4 minutes to type the word 'the' in the search window. How do I speed up the search because I can't browse 90k tracks.
-
How to grant user permission to create "Credential" and "Proxies"
Hi Team, Kindly let me know how to grant permission for user to create "Credential" and "Proxies" on server: Thanks in advance Santosh
-
Where we can see Sale order Number in the project which is asigned to it.
Hi, Where we can see Sale order Number in the project which is asigned to it. Regards, somiraghu