Siebel and SAP Integration (with appintegrator)

Hello,
I try to integrate Siebel in the Portal (EP6) with appintegrator.
Has someone some documentation on such integration ?
Is there easier way to integrate Siebel in the Portal ?
Thanks,
Fabien

Hi Fabien
You can also make use of the connector framework for your integration scenario. Check out this link.
http://help.sap.com/saphelp_nw04s/helpdata/en/8c/d7d6409ff68631e10000000a1550b0/frameset.htm
The documentation for appintegrator is also available at the same place.
Hope that was helpful.
Best Regards
Priya

Similar Messages

Brief discussion on SAP XI and its' Integration with SAP MDM.

Hi,
I have never worked on SAP XI.
I am discussing it on brief, please give your valuable replies.
SAP XI consists of System Landascape Directory(SLD).
SLD Consists of Business System and Techinical System.
Technical System contains all information about the software
component. The Business System consists of Inbound and Outbound Business
System which are used as logical names for data transfer.
There is communication Channel for Receiver and Sender Business System and n agreement
is signed between Sender and Receiver.
Outbound Interface defined for Business System Outbound and Techical System associated
with the Business System,
Inbound Interface defined for Business System Inbound and Techical System associated
with the Business System.
In SAP NetWeaver XI Integration Directory, we have defined the Integration Scenarios,
Actions, Interface Objects, Mapping Objects, Adapters Objects.
Mapping Object defines the Structure and Value Mapping.
Adapter Objects defines the Adapter program which implements RFC Adapter, FTP Adapter logic.
FTP Adapter is used for XI-MDM Communication.
RFC Adapter is used for XI-ECC Communication.
Integration Repository: Both Outbound and Inbound Interfaces are Mapped with Value mapping and
Structure Mapping inside Integration Repository.
The File Adapter takes the File from the Outbound port of MDM System
and sends it as IDOC to Receiver Business System.
Value Mapping must be done between Sender and Receiver interfaces.
Value Mapping is done by XSLT or Java based program.
SAP NetWeaver XI Integration Server at runtime:
Message Split, Interface Determination, Receiver Identifaction, Mapping, Techincal Routing
and Call Adapter Proccess are done.
In SAP XI 3.0 and MDM 5.5:
Step 1: Create busines system as service.
Step 2: Create communication channel for each business service. If the system can communicate
through different channels, then create all possible channel types if necessary.
Step 3: Create receiver agreement between the systems.
Step 4: Interface determination:
- Here you see for the first time the software component mentioned;
there are some special requirements regarding this software component in relation to the customizing ID mapping.
- To modify this software component, the customer needs to copy the SAP standard delivered software component
into its own namespace. The customer is able to modify to create archives
for the customized ID mapping.
Receiver determination.
Configure an FTP Server on the MDS.
Create a send folder for outbound messages using outbound port(s) for
remote systems(s).
Create receive folder inbound messages using inbound port(s) for remote systems.
This ia all about concept of SAP XI Infractsture and its' Integration with SAP MDM 5.5.
Regards
Kaushik Banerjee

Hi Kaushik,
You must be aware of File types that MDM Import Manager can Import i.e. we have XML, Excel etc. Now there are two transactions to extract data from R3
1. MDMGX -
         - For lookup table extraction
         - Output in XML format which MDM can import without using XI.
          - FTP can be configured to put the file in the desired folder which will be then picked by Import Server.
2. MDM_CLNT_EXTR -
          - For Main table records.
          - Output is in Idoc format which MDM doesn't understand hence we need XI in between which converts Idoc file received from R3 into XML which can then be imported using Import Manager or Import Server. For this we need to implement XI Scenario that consists of Source System, Receiver System, Type of Data etc.
Just a basic understanding...
Regards,
Jitesh Talreja

Business Object and SAP Integration

All,
We've BOJ Data Services XI installed.
Would like to integrate with SAP, does anyone know how or have good information about Business Object and SAP Integration?
Please adivce.

Hi Lynn,
If you need to have Business Objects and SAP work together in conjunction you need to have the Business Objects Integration Kit for SAP. Integration Kit provides the database drivers and other features for reporting off SAP.
Link to download the useru2019s Guide:
- Please go to Http://help.sap.com
- Click on Business Objects tab
- Select the product as Integration Kit for SAP
User guide: Business Objects Integration Kit for SAP Useru2019s Guide.
I hope that helps you.
Regards,
Prashant

OSB and SAP integration using XML web services

Hi Team,
We are designing solution for asynchronous and synchronous scenarios integration between OSB and SAP using web services.
Can you please provide some pointers which tells about how OSB and SAP integration works.
For an example:
If we are designing the above scenario between SAP PI and SAP ECC, we know the below communication protocols are avilable:
1.Proxy
2.RFC
3.IDOCs
And also we know how adapters will get connect.
Now ODB wants to connect to SAP to send and receive data. Please help me with information like:
1. Is Proxy, RFC or IDOCs are applicable for OSB as well?
2. How webservice scenarios can be implemented?
Thanks in Advance.
regards,
Vicky

Hi,
>>>and what are the Forms ? for SAP Business Connector Related Postings ??
try WM (webmethods forums) or here since this is the only middleware related forum on SDN
>>> I have a requirement to integrate sap to non-sap with Business Connector !!
excellent
>>>We need to Generate the SAP Data In xml Format ? and the Non-sap System can Understand Only XML Formated data.
fairly easy
>>>>Is there any way Business Connector Box can Pull the XML file from R/3 Application Server and store the file in the Business Connector Server. from that How do we Sent XML file to Non-sap. How do we Integrate ??
business connector has both IDOC and RFC adapters so it can
receive data from SAP (IDOC, RFC), send data to SAP (IDOC, RFC)
and pull data from SAP (RFC only)
>>>>what transaction code will trigger this event ? I mean is ther any SAP Transaction Code to Integrate Business Connector?
either transaction from SAP (for sending IDOCs for example) or you can schedule (via BC scheduler)
an RFC call to SAP that will fetch the data and put it in an XML file
good luck,
Regards,
Michal Krawczyk

Connection between SAP R/3 and SAP XI with RFC

Hi Experts,
I am beginner in SAP XI.
We are using SAP XI 3.0 SP 9 and SAP R/3 4.6 C
I am trying to validate a connection between SAP R/3 and SAP XI with RFC.
I followed all the weblogs ,and i did exactly the same way, but I am unsucessful...
Schema not available Exception
com.sap.aii.af.service.cpa.CPAException: Schema not available for RFC|3b787a8035c111d6bbe0efe50a1145a5|http://sap.com/xi/XI/System.
at com.sap.aii.af.service.cpa.impl.cache.directory.DirectoryDataSAXHandler.endElement(DirectoryDataSAXHandler.java:262)
at com.sap.engine.lib.xml.parser.handlers.SAXDocHandler.endElement(SAXDocHandler.java:154)
at com.sap.engine.lib.xml.parser.XMLParser.scanEndTag(XMLParser.java:1826)
at com.sap.engine.lib.xml.parser.XMLParser.scanElement(XMLParser.java:1722)
at com.sap.engine.lib.xml.parser.XMLParser.scanContent(XMLParser.java:2298)
at com.sap.engine.lib.xml.parser.XMLParser.scanElement(XMLParser.java:1719)
at com.sap.engine.lib.xml.parser.XMLParser.scanDocument(XMLParser.java:2701)
at com.sap.engine.lib.xml.parser.XMLParser.parse0(XMLParser.java:162)
at com.sap.engine.lib.xml.parser.AbstractXMLParser.parseAndCatchException(AbstractXMLParser.java:126)
at com.sap.engine.lib.xml.parser.AbstractXMLParser.parse(AbstractXMLParser.java:136)
at com.sap.engine.lib.xml.parser.AbstractXMLParser.parse(AbstractXMLParser.java:209)
at com.sap.engine.lib.xml.parser.Parser.parseWithoutSchemaValidationProcessing(Parser.java:270)
at com.sap.engine.lib.xml.parser.Parser.parse(Parser.java:331)
at com.sap.engine.lib.xml.parser.SAXParser.parse(SAXParser.java:125)
at javax.xml.parsers.SAXParser.parse(SAXParser.java:345)
at javax.xml.parsers.SAXParser.parse(SAXParser.java:143)
at com.sap.aii.af.service.cpa.impl.cache.directory.DirectoryDataParser.updateCentralCache(DirectoryDataParser.java:54)
at com.sap.aii.af.service.cpa.impl.cache.CacheManager.updateCacheWithDirectoryData(CacheManager.java:713)
at com.sap.aii.af.service.cpa.impl.cache.CacheManager.performCacheUpdate(CacheManager.java:595)
at com.sap.aii.af.service.cpa.impl.cache.CacheManager$CacheUpdateRunnable.run(CacheManager.java:440)
at com.sap.engine.frame.core.thread.Task.run(Task.java:60)
at com.sap.engine.core.thread.impl5.SingleThread.execute(SingleThread.java:73)
at com.sap.engine.core.thread.impl5.SingleThread.run(SingleThread.java:145)
Please help me out on this
Thanks in advance
Raju

hi,
try refreshing you CAP cache:
741214 (check this note)
and check if the refresh was successful
(CPA history)
Regards,
michal

How to monitory Siebel and E-business with Oracle Grid Control 12c

Hi All,
Please i need any documents for Monitoring Siebel and E-business with Oracle Grid Control 12c.
Thanks in advance,
Mostafa

I would think this is indeed the only way to monitor the URL.
Perhaps you could try a solution in creating your own plug-in.
Check http://www.oracle.com/technetwork/oem/extensions/index.html for this.
Regards
Rob
http://oemgc.wordpress.com

Error using CR 11.5 with dynamic cascading prompts and SAP Integr.Kit XI R2

Hi,
we are using the SAP Integration Kit XI R2 (patched up to FP4.3) in order to report SAP BW data (BW 3.5) in Crystal Reports 11.5 (SP 4). In order to access the stored BEx Queries we use either the SAP BW Query or the SAP BW MDX Query Driver (_we DO NOT use any universes_). Everything seems to work fine ex cept when we want to use dynamic cascading LOVs within CR. For example when a user runs a report she/he should select first a customer group (0CUST_GROUP prompt) and then the customer (0DEBITOR). Defining the cascading prompts with dynamic LOVs is no problem in CR and when the report runs (either in CR Designer or in InfoView) both prompts appear. Still when we do a selection for the first prompt (0CUST_GROUP) we get a 0x8004380D error with the text message stating that the system is not able to retrieve the LOV data (I guess for the 0DEBITOR prompt). Please note that we do not get a corba error and no firewalls are activated. We checked the trace files of the page server and found out that there was an error calling the createRowsetCursor function within enginekernel.cpp.
Any hints on our case will be mostly appreciated. We have the feeling that we are hitting a bug here but maybe we are overseeing something.
Cheers
Stratos
PS: Please note that if we access directly the ODS Object (SAP ODS driver) the dynamic cascading prompts on exactly the same InfoObject (or better their keys in the ODS) work without a problem.

Hi Stratos
You can define LOV's in universes but unfortunately you can not use universes based on SAP in Crystal Reports.
You can define parameters in the Bex query which are passed on to Crystal Reports, so you don't need to define them in the Business Objects tools. Please have a look at the SAP Integration Kit user's guide
Roland

SAP BI and SAP ECC6 with 2 production clients

Dear Expert,
Can you advise us in an orientation to be taken for SAP BI?
In term of SAP ECC6 architecture, we have two clients in production: client 100 (A) and client 400 (B). Within client 100, there is a company code 1000 with designation A and wthin client 400, there will be also a company 1000 with the designation B. SAP ECC6 manages without problem this architecture.
It was stated to me that the standard SAP BI, does not take account in its output program of the concept of client. For SAP BI, the two clients are systems sources. For infocubes, it is possible to differentiate the client but not for the infoobjects. The consequence, it is at the time as of updates of the data it would seem that for example the designation of the company 1000 will be that of the last upgrade. (1000 - designation A -> 1000 designation B)
Thank you.
Fabian

what CRM do they use?
if they use Siebel CRM ( Which is the case 60% of the time ) then tell them tht since Siebel wa brought by oracle, OBIEE has seamless integration with Siebel CRM.
I dont have much idea about SAP BI, but OBIEE has certain features like iBots, publisher etc, which are tough to match.
refer Oracle website.. I am sure they must be having good points because of marketing.

Crystal Reports and SAP Integration Issue

Gurus,
I am in the process of reinstalling my SAP B-One(2007 A) Server, after SQL Server and SAP Server and Client installtions and its related patch PL10. My machine is fully loaded and to go, but I am stuck with Crystal Reports Basic 2008 installtion.
After installting the below for Crystal Reports:
1) .NetPlatform SP1 setup (dotnetfx35sp1)
3) Crytatl Runtime
4) Crystal Setup
5) Crystal SAP Viewer
6) CR2008_SP3
My integration between SAP and CR are fine but after first log off and log on of SAP B-One.
Shows the below messages:
- "The new version of Add-on Crystal Reports for SAP Business One is
installed. Upgrade the Add-on in the current Common DB."
followed by the below one.
"Wrong Executable digital signature for Add-On".
Any advices on how can I upgrade the Common DB.
Faisal

Hi Faisal,
Is this issue realted to the previous thread you have posted. It looks similiar.
Re-installation meaning that you had installed aprevious version and now upgrading or is it a full installation.
Regards,
Rakesh N

LDAP and SAP integration

Hi,
As a part of a project requirement, we are trying to integrate Solution manager with LDAP (Lightweight Directory Access Protocol).
Using the directory service, we are trying to synchronize the CUA (Central user administration within Solution manager) with Active directory of LDAP so that we can maintain the User data centrally from a single point in LDAP.
Problem description:
Currently, Client has implemented the LDAP and CUA integration and when a new user is added in LDAP, it is automatically getting copied in all SAP systems and at real time, when the useru2019s u201CLASTNAMEu201D field is updated in LDAP, it is automatically getting synchronized in all SAP systems.
But, If any attribute other than u201CLASTNAMEu201D is changed (i.e. The expiry /validity date of the User in LDAP, GLTGB in SAP), then the field value is not getting synchronized in the SAP Central User Adm.
Our Findings:
We have checked the configurations and imported mappings in SAP Solution Manager and everything looks fine. We have debugged the standard program RSLDAPSYNC_USER extensively and found out that an RFC call to function module LDAPRFC_SEARCH is not returning the expected values.
Thanks
Deb

Hi Deb,
It would be really nice if you can elaborate on the configurations that need to be done as part of this integration. I hope, you have been successfull by now.
Actually, I too need to perform the same as part of a project.
Thanks in advance.

Informatica and SAP integration

Hi,
I have user manual how to connect Informatica and SAP. There are some examples, like.
1. an ABAP program - generated by Informaticas tool, deployed to SAP, runs on SAP, result is dumped into some file, and then imported to informatica over NFS or FTP
2. by running a BAPI or RFC
3. ALE, receiving or sending IDOCs directly from/to SAP.
And that all is OK, but I'm curious how to connect Informatica with XI/PI? Is there some blog or user-manual, is there some specific adapter?
thx
Mario

Hey,
>how to connect Informatica and SAP
Data integration using the ABAP program
IDoc integration using ALE
Data integration using RFC/BAPI functions
Data migration integration
Business content integration
If you wann to use PI in between SAP & Informatica as Prateek & Shaba mentioned you can use File to connect Informatica & PI.
Cheers
Agasthuri

Salesforce CRM and SAP Integration

Hello Experts,
I am supposed to come up with salesforce integration with SAP. Can you please let me know how do I start? What is that I can pick up from SAP to integrate this with salesforce and what are the hardware details required?
If somebody has worked on this please do let me know.
Thank you in advance,
Cheers,
Deepak

salesforce integration with SAP
salesforce->XI->SAP
1) send salesforce data through webservice to SAP XI. it will be done by using SOAP adapter.
2) XI will send data to SAP by idoc/rfc/proxy,depending on scenario.
this thread ll bring clarity on the same :
Salesforce.com integration with XI

Siebel 8.1 integration with BI Publisher 11g

Hello,
I'm currently trying to integrate BI Publisher reporting with Siebel 8.1 at work. We've followed the guide named " [BI Publisher for Siebel Applications Guide|http://download.oracle.com/docs/cd/E14004_01/books/Reports/ReportsTOC.html] ", which you can find in the Oracle BI Publisher documentation website: [http://www.oracle.com/technetwork/middleware/bi-publisher/documentation/index.html].
The problem is that this guide is meant to be used with the Oracle 10g version and we are using BI Publisher 11.1.1.5.0 (client's request).
We installed the new version without problems and reached the step "[Copying JAR Files to the Oracle BI Publisher Server|http://download.oracle.com/docs/cd/E14004_01/books/Reports/ReportsIntegrate11.html#wp551748]".
But since BI Publisher 11g runs on a Web Logic Server, instead of an Oracle Application Server (correct me if I'm wrong, I'm kind of new to the whole Oracle world), the file structures have changed and we cannot find the directory where we're supposed to copy those JAR files.
I kept reading the guide, in case we could skip this step and maybe find where those files are supposed to be later... but then again I found myself in a similar problem, since I need to place a Siebel WSDL file in a BI Publisher directory for importing, which I cannot find either.
Does anybody know how to accomplish this task or if it is even possible to use these software versions together? Could anyone at least point us to the right direction on where to look for this information?
Thank you in advance.

We actually ran into a similar problem where I work. I created a support web ticket for our issue and the response is that BIP 11G is not supported for integration with Siebel 8.1, or any other version for that matter. Oracle is currently working on a fix to integrated the latest version of Siebel with BIP.
There advice to me was to downgrade to BIP 10G for the time being.

User manual SAP integration with BO

Hi
Can i get user manual with SAP-BI with BO
for web intelligence
query as web servive
xcelsius
voyager
crystal reports?
authorizations

Hi Suneel,
you can download all documentation from help.sap.com and you can take a look here from a TechEd Session:
/people/ingo.hilgefort/blog/2008/11/19/businessobjects-integration-with-sap-netweaver-bi--technical-material
Ingo

XMII and BW Integration with OLAP connector

Hello Colleague,
Need your help in one of our xMII and BW integration. We have created all the config step as indicated in the How Tou2026 Integrate xMII with the Business Information Warehouse guide in SDN.
But when I tried created an OLAP query in xMII work bench it is giving following error. And the default Trace indicate the below detail.
36##0#0#Error#1#/Applications/XMII#Java###org.apache.commons.httpclient.HttpRecoverableException: org.apache.commons.httpclient.HttpRecoverableException: Error in parsing the status line from the response: unable to find line starting with "HTTP"
[EXCEPTION]
#1#com.sap.xmii.Illuminator.system.CommunicationException: org.apache.commons.httpclient.HttpRecoverableException: org.apache.commons.httpclient.HttpRecoverableException: Error in parsing the status line from the response: unable to find line starting with "HTTP"
     at com.sap.xmii.Illuminator.connectors.OLAP.XMLARequestHandler.discoverRequest(XMLARequestHandler.java:129)
     at com.sap.xmii.Illuminator.connectors.OLAP.OLAP.doProcessRequest(OLAP.java:91)
     at com.sap.xmii.Illuminator.connectors.AbstractConnector.processRequest(AbstractConnector.java:97)
     at com.sap.xmii.Illuminator.services.handlers.IlluminatorService.processRequest(IlluminatorService.java:56)
     at com.sap.xmii.Illuminator.services.ServiceManager.runQuery(ServiceManager.java:49)
     at com.sap.xmii.servlet.Illuminator.service(Illuminator.java:63)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.sap.engine.services.servlets_jsp.server.runtime.FilterChainImpl.runServlet(FilterChainImpl.java:117)
     at com.sap.engine.services.servlets_jsp.server.runtime.FilterChainImpl.doFilter(FilterChainImpl.java:62)
     at com.sap.xmii.system.SecurityFilter.doFilter(SecurityFilter.java:100)
     at com.sap.engine.services.servlets_jsp.server.runtime.FilterChainImpl.doFilter(FilterChainImpl.java:58)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:384)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
     at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
     at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
     at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
     at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
     at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
     at java.security.AccessController.doPrivileged(Native Method)
     at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:102)
     at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:172)
Caused by: org.apache.commons.httpclient.HttpRecoverableException: org.apache.commons.httpclient.HttpRecoverableException: Error in parsing the status line from the response: unable to find line starting with "HTTP"
     at org.apache.commons.httpclient.HttpMethodBase.readResponse(HttpMethodBase.java:1962)
     at org.apache.commons.httpclient.HttpMethodBase.processRequest(HttpMethodBase.java:2653)
     at org.apache.commons.httpclient.HttpMethodBase.execute(HttpMethodBase.java:1087)
     at org.apache.commons.httpclient.HttpClient.executeMethod(HttpClient.java:643)
     at org.apache.commons.httpclient.HttpClient.executeMethod(HttpClient.java:497)
     at com.sap.lhcommon.xml.XMLHandler.getDocumentWithPost(XMLHandler.java:502)
     at com.sap.xmii.Illuminator.connectors.OLAP.XMLARequestHandler.discoverRequest(XMLARequestHandler.java:126)
Kindly Help.
Best Regards,
Biswa

Hi Biswa,
you go through the following threads which is regarding OLAP connector:
https://forums.sdn.sap.com/click.jspa?searchID=14697177&messageID=5530170
https://forums.sdn.sap.com/click.jspa?searchID=14697177&messageID=5636842
Hope this will help you.
Thanks,
Manisha

Siebel and SAP Integration (with appintegrator)

Similar Messages

Maybe you are looking for