Signature verification registry key
Hello All,
I have been trying to find the registry key that handles the "default method for verifiying signatures". We are trying to apply this user specific key to the local machine; so when any of the users log in, they will not have to navigate to perferences - security - advanced perferences - always use the default method (and manually select the Topaz signature pad) for verification. Any leads would be appreciated.
Use:
-Dweblogic.security.SSL.allowSmallRSAExponent=true
Similar Messages
-
SCUP publishing errors (signature verification fails)
I have been unable to publish updates with full content in SCUP since getting it set up. Here is the environment:
Config Manager 2012 R2 environment
Installed SCUP on CAS (running Server 2008 R2)
Configured SCUP to use proxy
Here are the steps I followed to get it set up:
Used IIS Manager to create a certificate request and got certificate from our vendor.
Imported cert into local computer Personal certificate store.
Following
System Center Updates Publisher Signing Certificate Requirements & Step-by-Step Guide, exported .pfx with private keys for SCUP and exported .cer without keys into the Trusted Publishers and Trusted Root Certificate Authorities on the SCUP/CAS server.
I also configured a GPO to deploy these to clients.
Set up the Adobe catalogs, then tried to publish a reader update. Metadata updates work OK, but a full content publish generates errors.
These are the germane errors I am getting (with server name changed to something generic):
2015-01-07 20:16:04.100 UTC Error
Scup2011.6 Publisher.PublishPackage
PublishPackage(): Operation Failed with Error: Verification of file signature failed for file: \\ServerName\UpdateServicesPackages\9b8d0f21-d926-4a76-b64a-592b36247622\df7bfb6e-6c22-4bb7-9f15-b61ee3e09f96_1.cab
1/1/1601 12:00:00 AM
1997295659 (0x770C502B)
PublishItem: InvalidException occurred during publishing: Verification of file signature failed for file: \\ServerName\UpdateServicesPackages\9b8d0f21-d926-4a76-b64a-592b36247622\df7bfb6e-6c22-4bb7-9f15-b61ee3e09f96_1.cab
Updates Publisher 1/7/2015 3:16:04 PM
6 (0x0006)
Publish: A fatal error occurred during publishing :Signature verification exception during publish, verify the WSUS certificates and advanced timestamp setting are properly configured.
Updates Publisher 1/7/2015 3:16:04 PM
6 (0x0006)
I have a followed or looked at a bunch of potential fixes but no dice. Any ideas?That might be the vendor of the cert but does not tell anything about the type of cert. It has to be a code signing one - otherwise it won't work.
Torsten Meringer | http://www.mssccmfaq.de -
Hi everyone,
I'm trying to get a simple working example of public key signature verification with openssl/java.security, but so far I haven't been able to get it to verify. Can someone please spot what I might of done wrong?
openssl commands:
openssl genrsa -out private_key.pem -3 768
openssl rsa -in private_key.pem -pubout -out public_key.pem
openssl dgst -md5 -sign private_key.pem -out sign.file test.file
openssl dgst -md5 -verify public_key.pem -signature sign.file test.file // verifies OKThe file "test.file" only contains the text "message".
So on to the java side of things. Since openssl encodes the publickey as base64, i used a small utility (http://www.fourmilab.ch/webtools/base64/) to decode it so i could read it in as a byte[]. It says that "-" is an invalid character so I removed the header (-----BEGIN PUBLIC KEY-----) and footer (-----END PUBLIC KEY-----) before i decoded it.
the following is my code to try verify the public key/signature on the message.
public static void main(String[] args)
byte[] pkbytes = getFileBytes("/home/me/RSA/keys/pubkeybytes.pem"); // base64 decoded publickey
System.out.println("pkbytes: " + new String(pkbytes));
byte[] sigbytes = getFileBytes("/home/me/RSA/keys/sign.file");
System.out.println("sigbytes: " + new String(sigbytes));
try
KeyFactory keyFactory = KeyFactory.getInstance("RSA");
EncodedKeySpec publicKeySpec = new X509EncodedKeySpec(pkbytes);
PublicKey publicKey = keyFactory.generatePublic(publicKeySpec);
//sign
Signature sig = Signature.getInstance("MD5withRSA");
sig.initVerify(publicKey);
// read in message
FileInputStream fis = new FileInputStream("/home/me/RSA/keys/test.file"); // just contains "message"
byte[] dataBytes = new byte[8192];
int nread = fis.read(dataBytes);
while (nread > 0)
sig.update(dataBytes, 0, nread);
nread = fis.read(dataBytes);
// verify
System.out.println ("Verification: " + sig.verify(sigbytes));
catch (Exception e)
System.out.println(e.toString());
e.printStackTrace();
public static byte[] getFileBytes(String filename)
byte[] sigBytes = null;
try
FileInputStream in = new FileInputStream(filename);
sigBytes = new byte[8192];
int count = in.read(sigBytes);
in.close();
catch (Exception e)
System.out.println(e.toString());
e.printStackTrace();
return sigBytes;
}I'm really not sure what is wrong, but it is probably something obvious since I'm fairly new at this.
Any help is really appreciated,
Thanks.You didn't mention what the output was; did it throw exceptions? Instead of using some ad-hoc base64 decoder, just output the public key in the correct form directly from openssl, like the following:
openssl rsa -in private_key.pem -pubout -out public_key.der -outform DER.
NOTE: If you are not going to do something useful with an exception, then DO NOT catch it. -
%IPS-3-Invalid__digital_signature (signature verification fauilure)
hi,
i try to load the IOS-S416-CLI.pkg into my C1841 ISR, using CLI
problem is signature cannot extract and show me this error message %IPS-3-Invalid__digital_signature (signature verification fauilure)
while i am using version 5 realm-cisco.pub signature, download from cisco tools
anyone any idea for this?Hello,
This error message literally means that the crypto signature on your router and the crypto signature in the IPS signature update do not match. This can be the result of an incorrect pubkey in your router configuration or a corrupt signature package. If you transfer the signature update from one computer to another after downloading it from Cisco.com, be sure to do the transfer in binary mode. Transferring the file in ASCII mode will remove various characters from the binary file and make the file unusable. If you have not transferred the file after downloading it from Cisco.com, or you are certain that you have not used ASCII mode to transfer the file, try downloading the file again from Cisco.com. The original download may have been corrupt.
Below is the pubkey to compare with your router configuration:
crypto key pubkey-chain rsa
named-key realm-cisco.pub signature
key-string
30820122 300D0609 2A864886 F70D0101 01050003 82010F00 3082010A 02820101
00C19E93 A8AF124A D6CC7A24 5097A975 206BE3A2 06FBA13F 6F12CB5B 4E441F16
17E630D5 C02AC252 912BE27F 37FDD9C8 11FC7AF7 DCDD81D9 43CDABC3 6007D128
B199ABCB D34ED0F9 085FADC1 359C189E F30AF10A C0EFB624 7E0764BF 3E53053E
5B2146A9 D7A5EDE3 0298AF03 DED7A5B8 9479039D 20F30663 9AC64B93 C0112A35
FE3F0C87 89BCB7BB 994AE74C FA9E481D F65875D6 85EAF974 6D9CC8E3 F0B08B85
50437722 FFBE85B9 5E4189FF CC189CB9 69C46F9C A84DFBA5 7A0AF99E AD768C36
006CF498 079F88F8 A3B3FB1F 9FB7B3CB 5539E1D1 9693CCBB 551F78D2 892356AE
2F56D826 8918EF3C 80CA4F4D 87BFCA3B BFF668E9 689782A5 CF31CB6E B4B094D3
F3020301 0001
Quit
Thank you,
Blayne Dreier
Cisco TAC IDS Team
**Please check out our Podcast**
TAC Security Show: http://www.cisco.com/go/tacsecuritypodcast -
"Error while registering the Java 2 Runtime Environment registry keys"
"Error while registering the Java 2 Runtime Environment registry keys"
I am getting the above error when trying to install the 1.3 JRE (installed with the 1.3 plug in which I need). As part of my development I have been installing and uninstalling the JRE multiple times. Then, I got the above error when trying to install it, and now it appears to be installed but I cannot uninstall it. When I try to uninstall it, it just remains, and when I try to install it again I get the above error. I have tried cleaning up all javasoft registry entries, but it doesnt seem to have helped. Can anyone help me either completely uninstall the JRE so I can do a clean install or help me get rid of the error above when I install. Is there some registry entries I should be looking at? Anything else? this is quite urgent as I need to test my applet with the plugin installed and not installed - and I currently cant uninstall it. Any ideas?
Thanks for your help
AaronI am getting this same error message when trying to upgrade from 1.3.1_03 to 1.3.1_19.
I have multiple versions of jre's and jdks on my machine.
Anyone else seen this problem or know how to resolve it. -
When the updater notified me of an iTunes update, I selected the update option. The update failed and killed the version I was running. I have tried for a year to fix the problem without sucess. I can't completely remove all Apple products. I can not install any apple products especially iTunes which is the only one I am interested in.
When I install iTunes now I get a registry key error similar to this:
I am using a machine where I am the only user and am the Admin. I have looked at the security settings on this key and see nothing wrond with it or the parent keys. I tried removing all apple products but ran into similar problems. At this time I still have Bonjour. Mobile Device Support, Software Update, and Application Support installed.These ones are tricky. But the following instructions are worth a try.
First do a complete uninstall of iTunes and related components (but don't reinstall just yet), as per the following document:
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
a. Launch regedit (Start >> Search Programs and Files >> type Regedit and open the regedit that comes up.)
b. Access the following Location: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Installer\UserData \S-1-5-18\Components
c. Perform the following actions
i. Right Click on Components Folder
ii. Select Permissions
iii. Select Full Control and Read Permissions options
iv. Select Advanced Button
v. Select Owner Tab
vi. Select to Change Owner to the Administrators
vii. Check the option “Replace owner on subcontainers and objects”
viii. Select OK when prompted that it may not change all.
ix. Select Apply
x. Select Apply again
xi. Exit the Registry Editor
Now try reinstalling iTunes again. Does it go in properly this time? -
Java Plug-in not working with WinXP SP2 Registry Key Missing Error Pop-Up
I have WinXp PRO with SP2 and the Oct 12 Security Update Patch for SP2 loaded and I went to my Control Panel and saw that the JavaRuntime Environment 1.4.2_04 icon was missing and when I went to click the Java Plugin icon to Open it, I got the following message in a Error Pop-Up window:
The system cannot find the registry key specified:
HKEY_LOCAL_MACHINE\SOFTWARE\JavaSoft\Java pPlug-in\1.4.2_04\JavaHome
I then went to Chage Access Program Controls and when I clicked on the Change box for the program, it wanted me to re-install the whole environment.
Prior to doing this, and potentially screwing up my MS winXp environment, I went to the Sun support page for Java Plug-in and I did get the dancing elmo appear as they said I would but I noticed that my environment was MS VM, not Java and that I was out of date and a newer update was avaliable.
The downloads page for the plug-in states clearly that it supports WinXp SP1 and NOT SP2.
SO, my question is, do I need to re-install anything or wait till the whole SP2 issue and java with (BITS) issue gets resolved and just use the MS VM engine during my browsing time? Is there a workaround and what impact will this have on my system? I am not developing Java Apps but am a Power user in Windows who is wondering if applets and general browsing might be easier, faster and more fluid if the Java Runtime was enabled as opposed to the MS VM solution?
Any ideas or thoughts on this very timely issue would be greatly appreciated as I see others have tried to post related issues but none that succinctly combines what I have asked for here in this post.
Thanks from NYC -Phildid you know that XP SP2 has so many technical problems? try SP1 or contact the WindowsXP Vendor
-
How to get registry key lastwritetime using batch/powershell
Hello,
I want to get a registry key's LastWriteTime using batch/powershell. These are what i have tried..
1. Launch regedit and manually export the key using the UI, this gives me the lastwritetime, but I need a commandline version of this. regedit /e only exports the key and value data.
2. dir HKLM:\software\mykey
nothing returned
3. Get-ChildItem HKLM:\software\mykey | Select-Object *
nothing returned
4. Get-ItemProperty HKLM:\software\mykey | Select-Object *
LastWriteTime not returned; other values are returned
5. (Get-Item HKLM:\software\mykey).LastWriteTime
Nothing is returned
Is the only way to do this by using pinvoke with RegQueryInfoKey?
Thanks in advance
ss883rThe
.zip on the repository will still work for version 2. Basically, you'll get a definition for a function called 'Add-RegKeyMember'. You can dot source the provided script, or you can copy the function definition into your own script. You would use it like
this:
# Using Get-Item:
PS> Get-Item HKLM:\SOFTWARE | Add-RegKeyMember | select Name, LastWriteTime, ClassName
# Using Get-ChildItem:
PS> Get-ChildItem HKLM:\SOFTWARE | Add-RegKeyMember | select Name, LastWriteTime, ClassName
# Passing a path:
PS> Add-RegKeyMember HKLM:\SOFTWARE | select Name, LastWriteTime, ClassName
There's also a proxy function for Get-ChildItem that will automatically add the property anytime you use Get-ChildItem (dir, ls, gci) on a registry path. The PSv3 only method I was talking about simply updates the type data to automatically call the function
on any RegistryKey object. You can actually set version 2 up to do that, but it requires an XML file. -
When Installing iTunes I get an Error Message About A Registry Key
It gives me this error message:
Could not open key:
HKEYLOCALMACHINE\Software\Classes\QuickTimePlayerLib.QuickTimePlayerApp\CLSID. Verify that you have sufficient access to that key, or contact your support personnel.
I can't find that error listed anywhere on the iTunes support site. How can I fix this?
Windows XP Pro
Windows XP ProCould not open key:
HKEYLOCALMACHINE\Software\Classes\
QuickTimePlayerLib.QuickTimePlayerApp\CLSID
some folks have been having some success with pgfpdwife's technique in the following post:
pgfpdwife: Re: Could not open key HKEYLOCALMACHINE\Software\Classic\Quicktime.Quicktime\
note carefully that the technique involves a registry edit. be sure to make a backup of any keys you edit. if you're unfamiliar with your registry or registry editing, head to your XP help and support, do a search on registry, and read through the articles that come up.
There are also some instructions on how to back up registry keys in the following document:
Error 1406 or 1402 appears when you install iTunes or QuickTime for Windows -
When I first tried itunes with my new hard drive there was the problem with the registry keys but something also flagged up about needing a signed driver. Is this anything to do with why Itunes and my computer no longer recognises when my ipod is linked up? Whatever i try under 'devices' my ipod is never available to sync up. If anyone can help I would be most grateful.
Thanks for your reply. Unfortunately this has not worked. I didn't have quicktime to begin with so I don't know if that makes a difference? After following the instructions, I get the "registry keys missing" problem appear again (which I've subsequently fixed again) and then when I connected the ipod I got the following message - 'Device driver software was not successfully installed'.
I've tried windows update but this doesn't do anything as '...the service is not running'.
Any suggestions? -
Failed to set security on SQL Server registry key. Error: 2
Hi,
I have a Primary site (mixed mode) running SCCM 2007 SP1 for many months now with no issues.
This site is made up of two Win 2008 sp2 servers sharing the SCCM roles:-
SCCM01 - Site server, DP, RP, PXE and SQL2005 hosting the SCCM database
SCCM02 – SUP, MP, FSP, SLP
The SQL2005 on SCCM01 is running under a domain service account called
domain\service_sccm which is also a sysadmin in SQL as is the SCCM02 server.
In an effort to resolve the isse I have made this account a Domain Admin.
I have also used this account to log onto SEC01 to run the Secondary Site installation and to be the SQL Service account.
I'm now trying to add a Secondary Site on a Domain Controller called SEC01 (also Win2008 sp2) and on the same LAN as the SCCM01/02.
This is where I get problems.
I run the installation locally on the Sec Site server (DC) as a Domain Admin and the installation completes OK (all green ticks),
the ComponentSetup.log and Pre-Reqs are all good as well however when I check the ConfigMgrSetup.log I see the below -
Failed to set security on SQL Server registry key. Error: 2.
<11-09-2010 22:46:59> SMS Setup full version is 4.00.6221.1000
<11-09-2010 22:46:59> Successfully set security on Setup registry key.
<11-09-2010 22:46:59> Failed to set security on SQL Server registry key. Error: 2
<11-09-2010 22:46:59> Successfully set security on Identification registry key.
<11-09-2010 22:46:59> Creating SMS Inbox Source registry key ...
<11-09-2010 22:46:59> Installing SMS Site Component Manager ...
<11-09-2010 22:46:59> Installing Site Component Manager under acct <NT AUTHORITY\SYSTEM> path <C:\Program Files (x86)\Microsoft
Configuration Manager\bin\i386\sitecomp.exe>
<11-09-2010 22:47:01> Started Site Component Manager service
<11-09-2010 22:47:01> SMS Site Component Manager installation completed.
<11-09-2010 22:47:01> Done with service installation
Adding the PMP role to SEC01 also fails to install and no MPSetup or MPControl logs are created.
WebDav and win2008 roles, features all added and server fully patched.
Despooler.log on SCCM01 seems good and passing keys.
Tried installing to default path and to shortened path such as C:\SCCM
The new secondary site is listed in the console and an address can be added for the Secondary Site
BITS Server Extensions and Remote Differential Compression Features are enabled.
The Group memberships all appear ok:-
SCCM01
Local Admins
contains the sec site server SEC01, SCCM01, installation accounts
SMS_SiteToSiteConnection_001
SEC01 (the sec site server)
SMS_SiteSystemToSiteServerConnection_001
SCCM02
SEC01
No Local Admins as a DC
SMS_SiteToSiteConnection_002
SCCM01
SMS_SiteSystemToSiteServerConnection_002
empty
SQL 2005
This has the account logged in during installation as a sysadmin
SCCM02 is also sysadmin
The fundamental issue appears to be that the SEC01$ server account is not being added to SQL Logins (and therefore SCCM database Roles)
therefore the installation cannot complete.
I have tried to manually add the SEC01 account to SQL Logins before installation of Sec Site but this did not work.
Not sure if the fact that SEC01 is a DC may be a factor.
Appreciate any help if anyone has seen this before or can suggest a resolution.
ThanksAfter a lot of digging around and head scratching I eventually found the resolution.
The original thread title Error turned out to be a bit of a red herring in that my failure to deploy Sec Sites came down to two separate issues seemingly unrelated to the error message of the thread title.
The first part of the resolution was to manually create the SQL Server accounts for the Sec Site Servers and assign them to the smsdbrole_MP DB role to
let the SQL side of the SCCM install complete a s these were not being created automatically.
This then left the fact that that the installation of the Sec Site completed successfully according to the install logs in C:\ however the DP and MP would
never install.
The big clue was eventually contained in the mpfdm.log errors relating to
**ERROR: Cannot find path for destination inbox SMS_AMT_PROXY_COMPONENT on server REGISTRY SMS_MP_FILE_DISPATCH_MANAGER
and
**ERROR: Cannot find path for destination inbox Asset Intelligence KB Manager on server REGISTRY SMS_MP_FILE_DISPATCH_MANAGER
Thankfully the errors led me to these two blogs:
http://myitforum.com/cs2/blogs/scassells/archive/2009/07/20/error-cannot-find-path-for-destination-inbox-sms-amt-proxy-component-on-server-registry.aspx
and
http://social.technet.microsoft.com/Forums/en-US/configmgrsetup/thread/5fcc53d4-8629-4b34-9eaa-6cb020eedc13/
As it turned out the SCCM installation registry and folder creation does not complete and I had to manually enter the reg settings as detailed in the
links above to complete the installation. Once I did as described everything worked a treat – all my MPs and DPs are 100% now.
Solutions
Add the following reg keys to each of your effected secondary sites.
Inbox Fix
Windows Registry Editor Version 5.00
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\SMS\MPFDM\Inboxes]
"Asset Intelligence KB Manager"="E:\\Program Files\\Microsoft Configuration Manager\\inboxes\\AIKbMgr.box"
"SMS_AMT_PROXY_COMPONENT"="E:\\Program Files\\Microsoft Configuration Manager\\inboxes\\amtproxy.box"
Asset Intelligence fix:
Note: you will need to identify the next largest key value.
In my example it was key 49
Windows Registry Editor Version 5.00
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\SMS\Inbox Source\Inbox Definitions\49]
"Inbox Name"="Asset Intelligence KB Manager"
"Relative Path"="inboxes\\AIKbMgr.box"
"NAL Path"=""
"User Rights"=dword:00000000
"Service Rights"=dword:00000004
"Monitoring Enabled"=dword:00000001
"Location Type"=dword:00000001
"Guest Rights"=dword:00000001
AMT registry Fix.
Note: you will need to identify the next largest key value.
In my example it was key 50
Windows Registry Editor Version 5.00
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\SMS\Inbox Source\Inbox Definitions\50]
"Inbox Name"="SMS_AMT_PROXY_COMPONENT"
"Relative Path"="inboxes\\amtproxy.box"
"NAL Path"=""
"User Rights"=dword:00000000
"Service Rights"=dword:00000004
"Monitoring Enabled"=dword:00000001
"Location Type"=dword:00000001
"Guest Rights"=dword:00000001
Big thanks to Shaun Cassells and John Marcum for these blogs -
Notification Server error 2, Registry Key not found?
Hello everyone,
I've got more of a cosmetic problem as it seems atm. When checking the Component Status, I see some red crosses in a couple of components. Two being SMS_SITE_COMPONENT_MANAGER and SMS_NOTIFICATION_SERVER. The site itself seems to be working okay, although
it has some problems here and there, but nothing too troubling.
The first error, located in SMS_SITE_COMPONENT_MANAGER, states that a the registry key HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\SMS\NotificationServer cannot be written and returns error code 6 - handle invalid.
The second error, located in SMS_NOTIFICATION_SERVER, states that the above mentioned key cannot be found and returns error 2 - cannot find file specified.
I've checked the registry and the key is definitely there. I also checked the permissions and local service, system and the Primary Sites computer account have full permissions.
The Key contains three values:
- Default - REG_SZ - No Data
- Reserved 1 - REG_SZ - No Data
- Reserved 2 - REG_SZ - No Data
I've found this
thread that suggests a site reset as the solution, but that was already done two weeks ago and it's currently not an option as this is a live production system.
Any suggestions?
Best Regards,
FredHi Torsten,
I'm getting the following entries in sitecomp.log:
Component SMS_NOTIFICATION_MANAGER is running.
Writing component specific registry values.
Cannot get copy of HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\SMS\NotificationServer registry key on server V000C00001.ODIE.CORP.DIR. The operating system reported error 6: The system cannot find the file specified.
STATMSG: ID=579 SEV=E LEV=M SOURCE="SMS Server" COMP="SMS_SITE_COMPONENT_MANAGER" SYS=site.domain.com SITE=P00 PID=12940 TID=4816 GMTDATE=Mon May 05 07:35:25.898 2014 ISTR0="HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\SMS\NotificationServer" ISTR1="site.domain.com" ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=0
Component SMS_NOTIFICATION_SERVER is running.
I've also checked bgbserver.log and I'm getting the following entries there:
Register a DB connection...
BgbServerController COM wrapper object 59429902 is successfully initialized
Error: CBgbServer::ReadRegistrySettings - Could not read registry key HKEY_LOCAL_MACHINE\Software\Microsoft\SMS\NotificationServer on the server. The operating system reported error 2:
STATMSG: ID=578 SEV=E LEV=M SOURCE="SMS Server" COMP="SMS_NOTIFICATION_SERVER" SYS=site.domain.com SITE=P00 PID=8440 TID=11628 GMTDATE=Mo Mai 05 09:11:07.219 2014 ISTR0="HKEY_LOCAL_MACHINE\Software\Microsoft\SMS\NotificationServer" ISTR1="site.domain.com" ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=0
Error: Failed to read settings from registry
Failed to initialize BGB server. Wait 300 seconds to do initialization again
Hope this helps somehow. -
what is the registry key in Adobe Acrobat v9 which turns the dialog off: any form fields that have the same name in the merged documents are now...
There is no key because that is an important dialog. Why would you want it to go away?
-
Hello,
Title pretty much states it all. I initially set out (as part of a Security Forensics initiative) to identify the most recently installed applications, modified files, and registry key changes using PowerShell. I attempted to pull this information and sort
them by date installed/last modified, but it was brought to my attention this information isn't always present and can be modified - so it's not accurate.
At that time it was suggested we use Group Policy auditing for Registry and File System - but I'm not sure how I'm going to use/pull these in PowerShell? This will be used on remote host all over the world so local physical access isn't an option.
My question is:
Once Group Policy Auditing for Registry and File System has been enabled, how would I go about pulling those audit logs for review once a system has been identified as compromised? I'm brand new to this GP Auditing (we have a separate team for that) so feel
free to take it from the beginning. :)
Thanks in advance!Hi,
Here are a few suggestions for you:
Ensure Remote Registry service is started on local and remote machines.
Add the – Credential option and supply administrative credentials within the command.
More information for you:
Get-Eventlog doesn't work against Vista/W7 clients
https://social.technet.microsoft.com/Forums/en-US/c5185a01-b0d2-49a7-9aa7-52e6534ada04/geteventlog-doesnt-work-against-vistaw7-clients?forum=winserverpowershell
PowerShell - How to Get XML EventData - Remote Eventlogs - Exchange Events
https://social.technet.microsoft.com/Forums/scriptcenter/en-US/382b10c9-d740-46b1-b81c-b24de911eb14/powershell-how-to-get-xml-eventdata-remote-eventlogs-exchange-events-?forum=ITCG
Powershell script to gather failed logon attempts by event id and type from the security events log
https://social.technet.microsoft.com/Forums/scriptcenter/es-ES/00a62492-c63a-4c8b-92f9-1cc857223a00/powershell-script-to-gather-failed-logon-attempts-by-event-id-and-type-from-the-security-events-log?forum=ITCG
Best Regards,
Amy
Please remember to mark the replies as answers if they help and un-mark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected] -
Acrobat registry keys to create file name and path
Hi,
I need to find a way to get my Acrobat to create a pdf with the same name as the drawing file it's created from and in the same folder as the drawing file. The folder path will vary from drawing to drawing.
I need this to happen automatically, without prompting for the file name or the destination.
I see there is a way to set a pre-defined path using registry keys but is there a way to use registry keys to set the filename and path of the drawing, please?
I would rather not use scripting as I don't really know how to do it.
Thanks,
BarnabyI think it will use the path and name of the original file if you do not prompt for a file name. I always ask, so I am not sure.
Maybe you are looking for
-
Where do I download bonjour? Will it help me with my apple tv?
Is it correct that bonjour can help me manage my apple tvs? I am having problems with my itunes library recognizing 2 of my 5 apple tvs. Where do I get bonjour if this will help? thank you I have a Mac Message was edited by: tuffntiny
-
I had just imported the contents of my SD card into iPhoto (7.1.5). It got to the part where it asked if I wanted to delete the originals and, because I've done this enough to trust iphoto, I clicked on "Yes". ***Crash*** iPhoto unexpectedly quit. I
-
Local storage with Content viewer
I have a problem with local storage since last update of the content viewer. We create a folio with exclusive HTML5 files using some data that have to be saved on the iPad (User ID). It works very well during one month but since the last update, we h
-
Validated comments doesn't show in windows
i've validated some comments in a mac in Adobe Reader XI. When i've opened the file in a windows with Adobe Reader X, the validated comments aren't validated. All the checkbox isn't active.
-
New installation. XE 11.2 Passwords don't work.
This is my first attempt at Oracle Database. OS: Windows XP Pro sp3 Install went ok. Specified a database Username and Application Express Username. Same password for both. Initially I was able to log in no problem. But have not been able to log in a