SCUP publishing errors (signature verification fails)
I have been unable to publish updates with full content in SCUP since getting it set up. Here is the environment:
Config Manager 2012 R2 environment
Installed SCUP on CAS (running Server 2008 R2)
Configured SCUP to use proxy
Here are the steps I followed to get it set up:
Used IIS Manager to create a certificate request and got certificate from our vendor.
Imported cert into local computer Personal certificate store.
Following
System Center Updates Publisher Signing Certificate Requirements & Step-by-Step Guide, exported .pfx with private keys for SCUP and exported .cer without keys into the Trusted Publishers and Trusted Root Certificate Authorities on the SCUP/CAS server.
I also configured a GPO to deploy these to clients.
Set up the Adobe catalogs, then tried to publish a reader update. Metadata updates work OK, but a full content publish generates errors.
These are the germane errors I am getting (with server name changed to something generic):
2015-01-07 20:16:04.100 UTC Error
Scup2011.6 Publisher.PublishPackage
PublishPackage(): Operation Failed with Error: Verification of file signature failed for file: \\ServerName\UpdateServicesPackages\9b8d0f21-d926-4a76-b64a-592b36247622\df7bfb6e-6c22-4bb7-9f15-b61ee3e09f96_1.cab
1/1/1601 12:00:00 AM
1997295659 (0x770C502B)
PublishItem: InvalidException occurred during publishing: Verification of file signature failed for file: \\ServerName\UpdateServicesPackages\9b8d0f21-d926-4a76-b64a-592b36247622\df7bfb6e-6c22-4bb7-9f15-b61ee3e09f96_1.cab
Updates Publisher 1/7/2015 3:16:04 PM
6 (0x0006)
Publish: A fatal error occurred during publishing :Signature verification exception during publish, verify the WSUS certificates and advanced timestamp setting are properly configured.
Updates Publisher 1/7/2015 3:16:04 PM
6 (0x0006)
I have a followed or looked at a bunch of potential fixes but no dice. Any ideas?
That might be the vendor of the cert but does not tell anything about the type of cert. It has to be a code signing one - otherwise it won't work.
Torsten Meringer | http://www.mssccmfaq.de
Similar Messages
-
Hi all,
I've been seeing a really weird problem with signing my HTML5 extension for Illustrator. I'm using the ZXPSignCmd tool to create a .zxp bundle and sign my extension from the command line. I'm able to install the extension using the Extension Manager, and I've also been able to distribute it to a private group through Adobe Exchange. It installs just fine, and runs great the first time, but after closing Illustrator and reopening it the extension often fails to load and just shows a blank window. I'm on a Mac, and looking at the log file here shows the following error when it happens:
/Users/<<userName>>/Library/Logs/CSXS/csxs-ILST.log
2014-12-17 10:18:02 : ERROR Signature verification failed for <<extensionID>>
This is the only indication I have that it is a problem with the certificate. It seems really strange that it installs without errors and works once, but then fails when trying to load again. I was using a self-signed certificate, but I just bought a certificate from DigiCert to see if that would help, but I'm still having the same problem.
This actually happens very rarely on my machine, but happens frequently to my other users. I assume this is somehow because I have been doing the development on this computer, so something is different about my extension environment.
Has anyone else seen this issue at all? Does anyone have any tips that might help me to debug this? Other log files to look at, potential problems with the certificate or manifest file? I've tried about everything I could think of, so any help would be greatly appreciated!
Thanks,
JamesNailed :-)
For the folder you might save files into, there are few tokens in CEP:
/* Identifies the path to user data. */
SystemPath.USER_DATA = "userData";
/* Identifies the path to common files for Adobe applications. */
SystemPath.COMMON_FILES = "commonFiles";
/* Identifies the path to the user's default document folder. */
SystemPath.MY_DOCUMENTS = "myDocuments";
/* Identifies the path to current extension. */
/* DEPRECATED, PLEASE USE EXTENSION INSTEAD. */
SystemPath.APPLICATION = "application";
/* Identifies the path to current extension. */
SystemPath.EXTENSION = "extension";
/* Identifies the path to hosting application's executable. */
SystemPath.HOST_APPLICATION = "hostApplication";
Otherwise you can rely on JSX folder tokens such as Folder.appData, Folder.userData etc (see a complete list on pages 56-57 of the JavaScript Tools Guide pdf) and create your extension's own folder.
Mind you, CEP extensions should support both indexedDB and localStorage - one of them might fit your needs.
Best
Davide Barranca
www.davidebarranca.com
www.cs-extensions.com -
Digital signature verification failed - Error RTCCTOOL
Hi guys !!!
I am running the report from the SDCCNN - RTCCTOOL, but I get the following error message:
1. Digital signature verification failed
Description - The verification of the recommendation content using digital signatures has failed. Therefore recommendations were suppressed.
Implementation - Consult SAP note 69455 if there is a known issue with content verification. If you do not find a solution open a customer message on SV-SMG-SDD.
When I Goto - Digital signatures Activate button digital content verification is disabled.
Then go to the transaction on the client STRUST 000 and I found the certificate: SSF SAP AGS Online Content View The certificate shows:
Owner: CN=SID SSF SAP AGS Online Content Verification, OU=I0020596183, OU=SAP Web AS, O=SAP Trust Community, C=DE
Certificate List: CN=Online Recommendations, CN=OR-C, CN=V01M, OU=AGS, O=SAP AG, C=DE
CN=Online Recommendations Upd, CN=OR-U, CN=V01M, OU=AGS, O=SAP AG, C=DE
Both certificates will expire on 01.01.2038.
According to the help and OSS note 69455 tell me again that I must create this certificate every year, but I see this current certificate, what is the error?
What is the process because I'm not clear and can not find another OSS note or the SDN forum to tell me what is wrong is happening.
Thanks guys for the help I can provide.
DesiréHi all.
I have the same problem and explore all possible solutions found in this discussion and others without satisfactory result.
Everything points that may be an inconsistency error external certificate which is in the DB. Anyone know how to fix this.
Greetings. -
the device has encountered an unexpected error. Installation error: application verification failed
I have been receiving this message over and over again when trying to publish my iOS app for the app store (I use Flash cc AIR 3.9.1.1080 for iOS and my settings are: "device testing in interpreter mode", as my app uses several swfs).
I have done everything from scratch, as recommended on other sections of the forums: new app ID from my apple developer account, new Distribution Certificates, new Distribution Provisioning Profiles and nothing works.
I can install my app on my iPad if I use the development Certificate and Provisioning Profile and everything seems OK. But as soon as I use the Distribution Certificate and Provisioning Profile get the same message:
the device has encountered an unexpected error. Installation error: application verification failed
I have done everything from the beggining over and over and nothing works. Am I the only one having this issue on Flash cc???Hi Daniel:
I´m far from being an expert on Xcode (or any code) but this is what I did and it worked:
- On Xcode go to Preferences > Accounts > select your App Developer Account, then click "view details" on the lower right corner.
- There you can see which of your "Signing Identities" (Certificates) are "Valid". You should have at least one for Development and one for Distribution.
- Below that window there are two icons which you can use to add, export or revoke a "Signing Identitie" (Certificate).
- Choose the one you want to use (Develop. or Distrib.), export it to the folder of the app you are working on and name it in such a way you can relate it to your app. Before knowing this I was exporting them using Keychain Access and I wasn´t naming them to differentiate each one properly.
- On your Apple Developer account create the Provisioning Profile for your app. I deleted any App IDs or Prov. Profs. which were useless.
- Then on my Apple Developer account I generated a Development Prov. Prof. to install and test my app on my iPad. All went fine.
- Then an Ad Hoc Prov. Prof. again to install and test my app on my iPad. All went fine.
- Then I generated the App Store Prov. Prof. and I was able to install the app on my device without the upsetting error.
- Then I uploaded the app to iTunes Connect with no problem.
These link was useful for me: https://developer.apple.com/library/ios/technotes/tn2318/_index.html#//apple_ref/doc/uid/D TS40013777-CH1-TNTAG0
You can also search for "Certificates" and "Provisioning" on Xcode help.
Good luck! -
Signature verification failed for PolicyAssignmentID
I am in the process of setting up a new SCCM 2012 R2 server. I have just begun to add some test boxes to the environment and every server thus far is registering in SCCM but is not pulling down its policies. When doing a policy retrieval evaluation
cycle the below is
immediately spit out in the PolicyAgent.log file. Any help would be
appreciated!
Signature verification failed for PolicyAssignmentID {XXXXXXXX-XXXX-XXXX-XXXX-XXXXXXXXXXXX}
Raising event:
instance of CCM_PolicyAgent_PolicyAuthorizationFailure
ClientID = "GUID:F504615C-04F8-462D-B341-265C2FAEE7E7";
DateTime = "20140708132926.819000+000";
PolicyNamespace = "\\\\.\\ROOT\\ccm\\policy\\Machine\\RequestedConfig";
PolicySource = "SMS:RET";
ProcessID = 3532;
ThreadID = 4320;It seems I have resolved my issue. The cause was in the AD publishing. I'm not sure if some parts were corrupt or simply missing but after removing the AD forest from 'Administration\Hierarchy Configuration\Active Directory Forests' in the
SCCM admin console and re-adding it back SCCM was able to republish the needed info. Then after a few minutes to allow for replication I was able to run a machine policy cycle which pulled all of my policies down! -
WSUS Role on Server 2012 R2 fails - SQL Server Error "Schema Verification Failed SUSDB"
Server is Windows Server 2012R2
After installing the WSUS role with WID, when running the post installation task it installs the SUSDB in single user mode, runs all its scripts but then when it tries to set it it MULTI mode it fails with the error:
Schema Verification Failed SUSDB
If I log onto SQL Management Studio and try to set the database SUSDB to MULTI user mode manually it fails with the same error.
Detaching, deleting the susdb.mdf and .ldf files and re-running the post-installation task fails on the same error.
Uninstalling the WSUS and WID roles, deleting the C:\Windows\WID folder and reinstalling everything once again gives the same error during post installation.
Seems like a nasty bug.
Does anyone have any ideas? Perhaps there is a way to debug "Schema Verification Failed" errors in SQL Server?Hi,
If the WID can't access "C:\Windows\WID\Binn\DBVerify\SUSDBVerify.dll", this issue may occur.
Please change the account of WID to local system account in services.msc, then restart the WID service.
Then try to start the post-install again.
If issue persists, please check the detailed information of WID log.
Best Regards.
Steven Lee Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected] -
When I try to set-up iCloud, I get error message "Verification Failed"?
When I try to set-up iCloud, I get error message "Verification Failed - The certificate for this server is invalid. You may be connecting to a server that is pretending to be "setup.icloud.com" which could put your confidential information at risk." How do I get passed this message?
The only messages I'm aware of are the ones that say that you can't move to iCloud right now because servers are too busy and that you can continue using MobileMe. I'd try to go back to iClound in your Settings and give it another try.
-
XML Signature Verification Failing.... Need help
Hi,
I am trying to do signing and encryption at our side and try to decrypt and verify the sign at destination side.
Here i succeeded with signing, encryption and decryption. but failing at verification part. Can any body help me finding what mistake iam doing ?
Here i am copying the encrypted data from one server and giving input to other server to decrypt and verify sign.
Any help is greatly appreciated
Here is the log :
I am not requested to follow nested Manifests
2005-07-20 18:34:34,546 DEBUG [Thread-593] [org.apache.xml.security.utils.ElementProxy] [] setElement("ds:Reference", "thismessage:/")
2005-07-20 18:34:34,546 DEBUG [Thread-593] [org.apache.xml.security.utils.Base64] [] I was asked to decode "hfHBf9N+SL3lU9Tz8qYcR5Gz48E="
2005-07-20 18:34:34,546 DEBUG [Thread-593] [org.apache.xml.security.utils.resolver.ResourceResolver] [] I was asked to create a ResourceResolver and got 0
2005-07-20 18:34:34,546 DEBUG [Thread-593] [org.apache.xml.security.utils.resolver.ResourceResolver] [] extra resolvers to my existing 5 system-wide resolvers
2005-07-20 18:34:34,609 DEBUG [Thread-593] [org.apache.xml.security.utils.resolver.ResourceResolver] [] check resolvability by class org.apache.xml.security.utils.resolver.implementations.ResolverDirectHTTP
2005-07-20 18:34:34,609 DEBUG [Thread-593] [org.apache.xml.security.utils.resolver.ResourceResolver] [] check resolvability by class org.apache.xml.security.utils.resolver.implementations.ResolverLocalFilesystem
2005-07-20 18:34:34,609 DEBUG [Thread-593] [org.apache.xml.security.utils.resolver.ResourceResolver] [] check resolvability by class org.apache.xml.security.utils.resolver.implementations.ResolverFragment
2005-07-20 18:34:34,937 DEBUG [Thread-593] [org.apache.xml.security.utils.ElementProxy] [] setElement("ds:Transforms", "thismessage:/")
2005-07-20 18:34:34,968 DEBUG [Thread-593] [org.apache.xml.security.utils.ElementProxy] [] setElement("ds:Transform", "thismessage:/")
2005-07-20 18:34:34,968 DEBUG [Thread-593] [org.apache.xml.security.transforms.Transforms] [] Preform the (0)th http://www.w3.org/TR/2001/REC-xml-c14n-20010315 transform
2005-07-20 18:34:35,000 DEBUG [Thread-593] [org.apache.xml.security.algorithms.JCEMapper] [] Request for URI http://www.w3.org/2000/09/xmldsig#sha1
2005-07-20 18:34:35,015 DEBUG [Thread-593] [org.apache.xml.security.algorithms.JCEMapper] [] Found SHA-1 from provider BC
2005-07-20 18:34:35,078 DEBUG [Thread-593] [org.apache.xml.security.signature.Reference] [] <OrderCreate Version ...
2005-07-20 18:34:35,078 WARN [Thread-593] [org.apache.xml.security.signature.Reference] [] Verification failed for URI ""
2005-07-20 18:34:35,078 DEBUG [Thread-593] [org.apache.xml.security.signature.Reference] [] unverifiedDigestValue= hfHBf9N+SL3lU9Tz8qYcR5Gz48E=
2005-07-20 18:34:35,078 DEBUG [Thread-593] [org.apache.xml.security.signature.Reference] [] calculatedDigestValue= XBKGSvU5kiErHoBXSEeqJ8JUgZU=
2005-07-20 18:34:35,078 DEBUG [Thread-593] [org.apache.xml.security.signature.Manifest] [] The Reference has Type
2005-07-20 18:34:35,078 INFO [Thread-593] Signature Validation Result ----------- = false
Thanks in Advance.
-AnamSHi got the problem. Its rectified.
-Surendra -
Import cert in Cisco 7921 with error "certificate verification failed"
Hi everyone
I am trying to install a digit cert on a 7921 and I get the message on import of "certificate verification failed".
I have tried a number of time, create CSR file then login to certificate web site and get file assigned then import it back to the phone. I used the DER format
Many thx indeed,
RoyHi,
Referencing: https://supportforums.cisco.com/thread/2095711
Have you followed the steps outlined in page 72 of this guide? This should be applicable to 792x.
http://www.cisco.com/en/US/docs/voice_ip_comm/cuipph/7925g/7_0/english/deployment/guide/7925dply.pdf
Do you have any trace logs from the phone you can post after your attempt to import the cert? -
Adobe Acrobat X Pro: signature verification failing on 64bit Windows 7
Hi,
I have developed a plug-in for digital signing, creating standard PKCS#7. For verification, using default "Adobe Default Security" plug-in.
"Adobe Default Security" verifying my created signatures successfully on Windows 7 32bit machine but failing to verify signature created on Windows 7 64bit machine.
Message shown on 64bit machine is below:
Why only on 64bit machine document tampering check failing but the procedure of creating PKCS#7 is same?
So kindly do help me in this regard ASAP. What could be the reason there?
Regards,
Jhan ZaibIs a hardware token involved at all? Do you not have a 64bit driver for it?
-
The verification fails everytime I download Firefox to my mac. How can I fix?
I've tried to download Firefox twice and I keep getting the error message "verification failed". Same thing with Thunderbird. I have Mac osx
You can find the latest Firefox release in all languages and for all Operating Systems here:
*Firefox 19.0.x: http://www.mozilla.org/en-US/firefox/all.html
Try to repair the disk permissions:
*http://thexlab.com/faqs/repairprocess.html -
Connection verification failed for data source using mySQL
Hi,
I having problem with mySQL datasource and getting the above error. This is only happening in our staging server. We are using ColdFusion 8 running JRUN4 and trying to connect to mySQL v 5.1.41. I tried adding DSN from my localhost using ColdFusion 9 developer edition and I am able to connect without error.I know that mysql server, username & password is valid. I can access the mysql also using mySQL gui tool from different pc and it works fine. I'm believe that this has something to do with mySQL driver? Can somebody shed some light on how can I fix my DSN connection problem? Thank you.
here's the error:
Connection verification failed for data source: forum
com.mysql.jdbc.CommunicationsException: Communications link failure due to underlying exception: ** BEGIN NESTED EXCEPTION ** java.net.ConnectException MESSAGE: Connection timed out: connect STACKTRACE: java.net.ConnectException: Connection timed out: connect at java.net.PlainSocketImpl.socketConnect(Native Method) at java.net.PlainSocketImpl.doConnect(PlainSocketImpl.java:333) at java.net.PlainSocketImpl.connectToAddress(PlainSocketImpl.java:195) at java.net.PlainSocketImpl.connect(PlainSocketImpl.java:182) at java.net.SocksSocketImpl.connect(SocksSocketImpl.java:366) at java.net.Socket.connect(Socket.java:519) at java.net.Socket.connect(Socket.java:469) at java.net.Socket.(Socket.java:366) at java.net.Socket.(Socket.java:208) at com.mysql.jdbc.StandardSocketFactory.connect(StandardSocketFactory.java:173) at com.mysql.jdbc.MysqlIO.(MysqlIO.java:267) at com.mysql.jdbc.Connection.createNewIO(Connection.java:2739) at com.mysql.jdbc.Connection.(Connection.java:1553) at com.mysql.jdbc.NonRegisteringDriver.connect(NonRegisteringDriver.java:266) at coldfusion.server.j2ee.sql.pool.JDBCPool.createPhysicalConnection(JDBCPool.java:589) at coldfusion.server.j2ee.sql.pool.ConnectionRunner$RunnableConnection.run(ConnectionRunner. java:67) at java.lang.Thread.run(Thread.java:619) ** END NESTED EXCEPTION ** Last packet sent to the server was 0 ms ago.http://www.adobe.com/cfusion/knowledgebase/index.cfm?id=6ef0253
HTH
Tim Carley
www.recfusion.com
[email protected] -
Connection verification failed for data source:
Hi,
I having problem with mySQL datasource and getting the above error. This is only happening in our staging server. We are using ColdFusion 8 running JRUN4 and trying to connect to mySQL v 5.1.41. I tried adding DSN from my localhost using ColdFusion 9 developer edition and I am able to connect without error.I know that mysql server, username & password is valid. I can access the mysql also using mySQL gui tool from different pc and it works fine. I'm believe that this has something to do with mySQL driver? Can somebody shed some light on how can I fix my DSN connection problem? Thank you.
here's the error:
Connection verification failed for data source: forum
com.mysql.jdbc.CommunicationsException: Communications link failure due to underlying exception: ** BEGIN NESTED EXCEPTION ** java.net.ConnectException MESSAGE: Connection timed out: connect STACKTRACE: java.net.ConnectException: Connection timed out: connect at java.net.PlainSocketImpl.socketConnect(Native Method) at java.net.PlainSocketImpl.doConnect(PlainSocketImpl.java:333) at java.net.PlainSocketImpl.connectToAddress(PlainSocketImpl.java:195) at java.net.PlainSocketImpl.connect(PlainSocketImpl.java:182) at java.net.SocksSocketImpl.connect(SocksSocketImpl.java:366) at java.net.Socket.connect(Socket.java:519) at java.net.Socket.connect(Socket.java:469) at java.net.Socket.(Socket.java:366) at java.net.Socket.(Socket.java:208) at com.mysql.jdbc.StandardSocketFactory.connect(StandardSocketFactory.java:173) at com.mysql.jdbc.MysqlIO.(MysqlIO.java:267) at com.mysql.jdbc.Connection.createNewIO(Connection.java:2739) at com.mysql.jdbc.Connection.(Connection.java:1553) at com.mysql.jdbc.NonRegisteringDriver.connect(NonRegisteringDriver.java:266) at coldfusion.server.j2ee.sql.pool.JDBCPool.createPhysicalConnection(JDBCPool.java :589) at coldfusion.server.j2ee.sql.pool.ConnectionRunner$RunnableConnection.run(Connect ionRunner.java:67) at java.lang.Thread.run(Thread.java:619) ** END NESTED EXCEPTION ** Last packet sent to the server was 0 ms ago.Also make sure your firewall has the required port open (1433
default) and if you are running 2003 on the SQL box, especially if
you ran the security Wizard, make sure the IPSec is allowing the CF
box to communicate with it, and vise verse. -
Verification failed! codec overrun!
So this is a brand new MacBook given to me yesterday as a Graduation present. I haven't been able to download anything (such as MSN messenger for Mac and Firefox for MAC, both of which have been downloaded from Apple website). I have tried probably fifty times. Each time I get the same error message 'verification failed' and then 'codec overrun'. I've called Apple three times today, and had to reinstall my software three times. Nothing has worked.
The Mac people don't know how to fix it.
Help anyone???I'm getting this same error, from Firefox AND Safari. I'm using a TiPB/867MHz with a gig of RAM. I did the archive install (which mucked up my Apache2/PHP install, but that's another story), I did AppleJack.
Once I did the "downgrade" from 10.4.11 to 10.4.6, I was able to download the two Java updates (20 and 36MB - ????) but I can't download the 10.4.11 update at 186MB.
I also can't download things like Plone, iWork '08 demo, and a lot of other things. BUT I went to my Intel Macbook and the same links download fine.
I thought it was bad RAM, but I ran Techtool and everything checked out OK. Applejack didn't find any problems either. -
Connection verification failed for data source on port 1433
Trying to set up a DSN for a SQL Server database on a new computer and it's failing every time.
Connection verification failed for data source: csf
java.sql.SQLNonTransientConnectionException: [Macromedia][SQLServer JDBC Driver]Error establishing socket to host and port: SANDYPC:1433. Reason: Connection refused: connect
The root cause was that: java.sql.SQLNonTransientConnectionException: [Macromedia][SQLServer JDBC Driver]Error establishing socket to host and port: SANDYPC:1433. Reason: Connection refused: connect
Now, when I installed CF 11, it installed on port 8500. However, when I try changing the port in the setup to 8500, I get this error:
Connection verification failed for data source: csf
java.sql.SQLException: Timed out trying to establish connection
The root cause was that: java.sql.SQLException: Timed out trying to establish connection
I cannot find anything online on how to fix this! HELP!!!Hi,
Is that SQL Express edition? If so perhaps TCP protocol is not enabled. Is Windows firewall turned on? Check port 1433 is open.
Normally you would not create a datasource to apache port 8500, that is a web server not database server port.
HTH, Carl.
Maybe you are looking for
-
I have two printers on my network. Does anyone know how to change the printer nomenclature - Officejet Pro 8600 (0B54AF) to a recognizable name...like Brad's Office when you use Airprint?
-
Revision: 3580 Author: [email protected] Date: 2008-10-10 16:24:50 -0700 (Fri, 10 Oct 2008) Log Message: MXMLG-243 - Path does not draw in the correct location when width and height are set Fixed MatrixUtil.transformBounds to offset the four bound po
-
Preservation of connections prior to upgrade from v9.3.x to v11.1.2
Hello again SV Gurus out there!! I am contemplating upgrading the Smart View add-in on my PC from v9.3.1.6 to v11.1.2 and since I have quite a few connections already set up against our Prod and Non Prod environments, I would like to know whether it
-
Different margins on 'Show layout'
When I go to View/Show Layout in Pages '09, the grey area around the page shows a shorter top margin than bottom. This means that when I try to make a poster, it prints with uneven white space around it.. Changing the document margins has no effect o
-
Converting application SQL code
I see that the migration workbench will convert stored procedures. Are there any tools that will help to sniff out or convert application SQL code for MS SQL into SQL supported by Oracle. I am converting from SQL Server 7 to Oracle 8i. Any help would