Silverlight video playback in SP 2013

Hi,
I have uploaded MP4 videos to SP 2013 in a Asset Library I created. Although the video is MP4 format, SharePoint will play it back in Silverlight rather than HTML5. I will appreciate any help in what I need to do in order to ensure that playback
is via HTML5.
Thanks

Hi GuYuming,
Document mode change worked for me perfectly and i am able to load MP4 video using HTML5.
But when I tried to embed Video on page using "Embed Code" section, My code does not worked in IE9 (doc mode IE9) but it worked in Chrome. Here is the code i have used
<div>
<video>
<source src="/SiteAssets/movie.mp4" type="video/mp4">
</video>
</div>
Do I need to add any attributes to video tag to make it word in IE9? when I saw the Video tag generated by Media web part it has following code
<video width="640" height="360" id="ctl00_ctl43_g_1f112b5e_6c19_40ed_ab12_8889afe2f33d" onloadstart="" src="/_layouts/15/clientbin/mediaplaceholder.mp4" poster="/Style Library/Media Player/VideoPreview.png" data-mediaTitle="Media Web Part" data-init="1">
<source src="/SiteAssets/movie.mp4" type="video/mp4">
</video>
looking for some help.
-Amol Meshe

Similar Messages

Poor quality HD video playback when in full screen?

I've recently purchased a late 2013 iMac 21.5" mid-range model and finding the video playback quality poor when opening it up to full screen. Does anyone else have this issue?? I was expecting similar quality to my HD tv when using the iPlayer app, but i@m even finding it poor when watching the HBO trailer on the Apple website for Game of Thrones. I have also been into my local Stormfront and found the same issue on both their 21.5 and 27" models on the shop floor.
Am I being too picky? The quality when it is in the small window is amazing.

The quality when it is in the small window is amazing.
One thing that pops into my mind is: what is the resolution/size/quality of the video you are watching? If it was created in a smaller size, then forcing it into showing on a bigger screen will always impact the quality significantly. You cannot enlarge a picture or video without significant quality loss (fuzzy/pixelation).

No video playback in premiere CS6 trial

Hi,
I am trying to use the Adobe Premiere CS6 trial on my laptop but I can't get the video playback to display at all. There is audio playback, just no video. I can get a paused frame to show if I double-click on the playback area but pressing play does not make the video play, only the audio. Stopping the playback displays the latest current frame again.
My laptop's specs are as follows:
Toshiba notebook
Intel i7 2.40GHz
8gb RAM
500+ gb free space
Windows 8 64
Latest Intel display drivers installed
The video files I am importing in my sequence are .mov files, 1920x1088 @ 23 FPS.
Any help will be appreciated!
Thanks for your time,
- Benjamin

thank you. I was crazy trying to solve the problem. I install the drivers
and ..... like magic .... all the problems solve.
Thank you
Oren
2013/5/7 bdestrempes <[email protected]>
Re: No video playback in premiere CS6 trial created by bdestrempes<http://forums.adobe.com/people/bdestrempes>in
Premiere Pro - View the full discussion<http://forums.adobe.com/message/5295140#5295140

2014.0.1 Update freezes video playback

Since downloading the 2014.0.1 update, my video playback will work for about 30 seconds and then will consistently freeze the frame right before moving onto the next clip. The audio continues to play from the next clip while the frozen frame is on screen.
Yesterday an Adobe helpdesk team member did the following:
-upped the ram available to premiere to 13gb instead of 11
-changed my Renderer to: Mercury Playback Engine GPU Accelerator (OpenCL) instead of Mercury Playback Software only
However, this has not stopped the problem from happening.
Changing the resolution in the playback monitor from Full, to 1/2, or 1/4 does not fix the problem either.
Is anyone else having this problem? Any suggestions?
Thanks.
System Specs:
Apple iMac 27" (Mid 2011)
3.4GHz Intel Core i7
16 GB 1333 MHz DDR3
AMD Radeon HD 6970M 1024 MB
1 TB SATA Disk (Local)
4TB Lacie Thunderbolt RAID (External)
OSX 10.7.5 (11G63b)
Software Specs:
Adobe Premiere Pro CC 2014.0.1
8.0.1 (21) Build

Same, thought for sure the latest Pr update was going to fix it. Have had to resort to GPU Software mode which is spotty at best, but seems to work the longest in that setting before freezing. Now wasting time rendering, its like being back in FC7 with rending. What a waste of money and time. Will keep checking back to see if anyone has a figured this out. FYI: My MacPro Laptop 2013 with Nvidia graphics card with 16Gs memory has no problems with any of this, but it kind of defeats the purpose, since I thought I was upgrading to a faster better more powerful system.
MacPro 6 core, 65 GB, FirePro 500

IPhoto video playback issues

Has anyone had issues after upgrading to iOS Yosemite? In iPhoto ver 9.6 when attempting to play high-res videos taken on a gopro the video playback is very choppy. The audio seems to be fine, but the video is quite bad. Looking at 1920x1080 res @60 fps. For those familiar with gopro these were taken while protune was enabled. Never had an issue while using Maverick.
MacBook Pro (Retina, 13-inch, Late 2013)
Processor 2.4 GHz Intel Core i5
Memory 4 GB 1600 MHz DDR3
Graphics Intel Iris 1536 MB

Hi lksdjfl,
Thanks for the question. Based on what you stated, it seems like you want to install a prior version of OS X because of choppy video playback. I would recommend that you read this article, it may be able to help you isolate or resolve the issue.
Mac OS X: How to reinstall a prior version - Apple Support
Thanks for using Apple Support Communities.
Cheers,
Mario

Premier Elements 10. No video playback.

Hi,
I have just started to use Premier Elements 10 after purchasing a couple of years ago. I can import videos of most formats. But when brought into edit I get sound but no video playback. it's a blank screen. Sometimes I can get it to work sporadically if, for example, I try motion tracking. But it will only work once. If I try and go back then its back to sound only. This is my first play around with premier and I have not tried changing any settings. The PC is brand new with I5 processor and 16GB mem. Any ideas please?
Many thanks.

flowerofthesevem
On what computer operating system is your Premiere Elements 10 running and what video card/graphics card does the computer use.
If a NVIDIA GeForce card, then that is likely the cause of your problem. This is a known Premiere Elements/NVIDIA GeForce issue which
forces the user to roll back the driver version to May 2013 in order to use Premiere Elements 10 on that computer.
ATR Premiere Elements Troubleshooting: PE10: NVIDIA Video Card Driver Roll Back
If that is the case, I can help you determine if there is an old enough NVIDIA GeForce driver version available for your situation.
Also, do you have the latest version of QuickTime installed on your computer along with Premiere Elements 10 and are you running the
programs as administrator?
Please review and consider and then we can move forward based on the details in your reply.
Thank you.
ATR

Video Playback Issues With Apple TV3 Running OS8

I have two Apple TV3s (Both Pre 2013)
One updated today to the latest OS8, the other still running the previous OS7.1.2
Now when trying to play virtually any of my own MP4 videos the OS8 firmware version Apple TV3 refuses to play the file.
Apple TV simply displays "An error occurred loading this content" (retrying simply displays the same error again)
If I then use the second Apple TV3 (running the older firmware OS7.1.2) and try to play exactly the same files from the same iTunes library the file will play back correctly.
So far the OS8 Apple TV3 is unable to play over 95% of the video files it could previously play prior to the firmware update.
The odd file will play but these files are of differing resolutions so don't appear to share anything in common. It is always the same files that will or wont play.
All video files are Profile 4.0 or lower and contain the required audio tracks.
I am running iTunes 11.4.0.18 (Windows 8.1)
Prior to the update every video file played correctly (on both Apple TVs) and the second Apple TV3 (using the earlier OS7.1.2 firmware) still plays the exact same files correctly.
Music files are unaffected and playback correctly on both Apple TV3s.
The latest firmware update appears to have corrupted the video playback of the Apple TV3 in some way.
I have even tried a complete USB restore of the OS8 Apple TV3 but this has made no difference.
Has anyone else experienced MP4 playback issues since updating their Apple TV3 to OS8?
Thank you in advance.

After further tests it would appear that Apple TV 7.0 (OS8) firmware is unable to play any video file with NO CHAPTER markers.
If I use MetaX to simply tag an unplayable MP4 file with a single chapter, that file will now play correctly using an Apple TV3 running Apple TV 7.0 (OS8). If the single chapter is then deleted the same file reverts to being unplayable.
In previous versions of Apple TV firmware any video file with NO CHAPTER markers could be played correctly and the Apple TV would automatically generate chapter markers at equally distributed time gaps.
For some reason Apple TV 7.0 (OS8) firmware appears to have removed this auto chapter marker feature so if a file has no chapter markers the Apple TV will now consider the file as invalid.
With MetaX it is possible to manually generate additional chapter markers so you can still skip through the file rather than only scan.
iFlick for Mac should I suspect be able to do the same thing.

Intermittent stalling during audio/video playback

This issue is driving me up the wall. I hope someone can help.
Often, while listening to (for example) iTunes, playback stalls and there is silence for several seconds. If I listen to music for an hour, I guess I might experience the issue anywhere from 3-6 (?) times — though sometimes I can go for more than an hour without it happening. But: it doesn't just happen with iTunes — the same thing happens from time to time when using VLC for video playback (usually accompanied by some video artifacts), or HTML5 video playback within Safari. (I don't have Flash Player installed, though I occasionally use Google Chrome for Flash content; if I recall correctly I think the same thing sometimes happens with Flash videos/audio within Chrome too.)
Along the same lines, now and then I notice that when attempting an action within Mail.app, a task will appear in the Activity Window that's something like, 'waiting for the hard drive,' with a barber pole and stop sign. This will delay my action for several seconds. I suspect this is a different manifestation of the same underlying problem that causes the playback stalling.
I DON'T typically get the swirling beach ball of doom when any of these things happen. Mouse pointer does NOT freeze, and the system seems responsive in all other ways during these episodes.
I'm pretty Mac savvy, and I make sure to do regular hard drive maintenance (verifying volume with Disk Utility, rebuilding directory with DiskWarrior, etc.). My startup partition is only about 2/3 full. This week I used iDefrag to defrag the hard drive, thinking it might fix the problem, but nope it still happens. SMART diagnostics have never shown a problem.
When researching this issue on the web, some folks have suggested keeping an eye on the log files (Console.app), and Activity Monitor. I definitely haven't found anything in the log files that coincides with incidents of stalling. And nothing in particular seems to 'spike' in CPU activity in the Activity Monitor at the same time as the stalling; at least not that I've noticed.
I'm pretty good about keeping apps up to date, and I don't have too many apps running in the background. But the problem persists even when I've quit everything else except the app that's doing the audio/video playback.
This has been going on for a long time, and nothing I've tried has helped. Any advice or suggestions, anyone??
- Gord

Checking Console.app messages once again, the following lines seem to coincide with at least some of the stalling incidents:
===
2013/03/05 1:32:33.231 am Finder[595]: PlotISImageRef 0x29f50026 InContext 0x7f986b3c1340 in {33.000000,493.000000,16.000000,16.000000}, inAlign:5, inTransform:0, inFlags:0 failed. (err=-2582)
2013/03/05 1:32:34.499 am Dock[590]: no information back from LS about running process
2013/03/05 1:34:58.597 am Safari[8023]: PlotISImageRef 0x20990018 InContext 0x7ffb9b9d6ea0 in {33.000000,493.000000,16.000000,16.000000}, inAlign:5, inTransform:0, inFlags:0 failed. (err=-2582)
2013/03/05 1:35:00.853 am Dock[590]: no information back from LS about running process
2013/03/05 1:35:39.917 am TextEdit[8026]: PlotISImageRef 0x25910017 InContext 0x7f8873a45940 in {33.000000,493.000000,16.000000,16.000000}, inAlign:5, inTransform:0, inFlags:0 failed. (err=-2582)
2013/03/05 1:35:41.186 am Dock[590]: no information back from LS about running process
2013/03/05 1:42:14.318 am Finder[595]: PlotISImageRef 0x29f50026 InContext 0x7f986c064400 in {33.000000,514.000000,16.000000,16.000000}, inAlign:5, inTransform:0, inFlags:0 failed. (err=-2582)
2013/03/05 1:42:15.986 am Dock[590]: no information back from LS about running process
===
Any significance to this? Thanks for any help.
- Gord

Resizeable flash video playback

How do you make a resizeable flash video playback? Is there a
control for that?

I'm writing this follow-up so that if anyone else runs into this issue, they might have a solution to fix it.
The infinite buffer hang was an issue that happened across my network, no matter what Mac device was being used and I was able to duplicate it on a number of machines manufactured between 2010 and late 2013, They were also running various opperating systems from snow leopard to lion to mavericks. All flash updates were the most recent.
Given that the only new change was a network upgrade, all signs pointed to this. After examining the network config using airport utilities, I discovered a double NAT error (that airport was currently ignoring). The cable router and airport router were both trying to establish a 192.x.x.x IP. I got my cable provider to config their router so it worked as just a modem and not a router and the Flash hang problem went away.

Can't hear recorded sound during video playback

I take a lot of videos of my kids. I have noticed lately that the volume is low or muffled...you can't hear what is being said even if they are screaming 6 inches away. I thought maybe something had gotten into the microphone, etc. I recorded a voice memo and on playback i could hear what was recorded just fine at a normal level. Now once I tried to record a video of my kids talking, it played back so low that i can't hear anything and that is with the volume turned wide open. Not really sure what this issue could be but if the volume works fine on voice memo wouldn't it work the same on video playback?

Hi there AmPriSi,
It sounds like you may be experiencing a microphone issue with your iPhone. Use the following article to help you address this issue:
iPhone: Microphone issues
http://support.apple.com/kb/ts5183
Take care, and thanks for visiting the Apple Support Communities.
Cheers,
Braden

ITunes / Windows Video Playback.. (what, you actualy want to WATCH vid's?)

I'm sure there are several people out there that are having the same or similar problems, but because I can't seem to find them with the exact problem I'm having, I thought a new thread would be appropriate....
Upgraded from 6 to 7 yesterday... music seems to play OK (not as good as 6, but not all the issues other people are having). Now video playback in iTunes is little more than a slideshow with audio to (almost) match.
When I go to play back any vid podcast, or other video in my library for that matter, iTunes bumps my processor up to 100% and holds it there, and the video does little more than skip and bounce through the entire playback (even if the overlay controls go away fully, the slightest mouse movement brings them back). The audio quality seems to almost follow the video, but they get away from each other (the audio was about 2 seconds ahead of the video/slide show while watching the current version of Photoshop TV). Any other video player works fine, but if I wanted to use them, I would have never installed iTunes in the first place, the idea being that the integration was the blessing.
I USED to be able to watch a video, use Photoshop CS2, have Flash 8 open behind it, After Effects running on a seperate monitor, browse the web, and play freecell all at the same time, with several background utility style apps going all at the same time with out a hickup.
After trying the IDE fix's, the sound setup fix's and any other fix's found in the discussions (and yes, reverting them after they failed to fix the problem), I'm still having an issue, and now I can't find iTunes 6 to try to get back to a good time in life... oh why oh why apple, why do you have just as many issues as windows? I had hoped for so much more....
Anyone? Any Ideas? Anyone willing to email me itunes 6 so I can get back to a better time in life? Or provide answers? I've got a horriable track record with apple (over 20 business stopping questions, and to date 0 responses) so I am about 2 minutes from giving up
Sorry apple, but this is way past frustrating... were all your win/tel beta testers using mac's?
HomeBuilt Windows XP Pro ATI 9700 Pro / AMD Athlon 64 3800+ / hampster on treadmill running his head off...

Are sure that's not Flash needed for those videos?

How can i monitor network traffic to debug video playback issues from a NAS?

I am having problems playing videos on my new Mini that i am using as an HTPC.
I have a brand new Mac Mini running Lion with a 2.7 i7 processor and 8GB of RAM with a wired connection to a switch. .
My switch is a NETGEAR ProSafe GS108T-200NAS set to default settings. I haven't had a chance to start messing with VLAN settings or anything else. There is a bit of a learning curve on my part on this end.
My NAS is a ReadyNAS Pro (RNDP6000) with 3 x 1 TB hitachi ultrastar (HUA722010CLA330) drives and a 1.5 TB seagate (ST31500341AS) drive setup in RAID config using X-RAID2.
The problem I am having is video playback when accessing large video files off of the NAS. These are typically 1080 HD mkv files.
I have tested movies as small as 7.5GB with only slight stutters on occasion. I tried a 10.5GB movie and the stalling was much more pronounced. Movies larger than 11GB are completely unwatchable stalling every minute or so.
I have also tried large movies on the local drive and that is not a problem at all - they play back just fine. Beautiful playback in hidef. Mind you, some of these are the same files that were stalling over the network.
I have also noticed that some other network devices get kicked off the network when a movie is playing.
I think it has something to do with the transfer speed of files over the network and the switch - i am no expert at this mind you.
I am wondering if there is some sort of utility that i can use to monitor network activity on the mini so that i can fix my problem. Or has anyone made chages in their switch settings to optimize data trasfer speeds.
Any advice or recommendations on.
Thank you all!

OK, I did a couple of things and ran things a couple of times.
First what I did settings wise:
I enabled jumbo frames on the Mac Mini, ReadyNAS Pro, and the Netgear GS108T switch. All with MTU set to 9000.
I went ahead and enabled jumbo frames on the rest of the computers on the network just in case.
After these changes I ran into the same problems with videos timing out - very annoying and frustrating as you can imagine.
Then I started playing with device configurations. My original configuration was NAS > Netgear switch > Mac Mini. I went ahead and switched the switch to an Airport Extreme I have as my WAP and the setup looked like this - NAS > Airport Extreme > Mac Mini.
Well, long story short, no go. It appears to me that the NAS is the one having issues providing the necessary data at the proper speed. I also tried playing sopme movies off of the NAS onto a desktop i have and had the same issues - choppy frames and crashing movies. I even tried connecting wirelessly to see if that would work.
BTW, I have the Mac accessing the file system using CIFS.
I don't know what else I could do.
I am going to have to go to the Netgear forums to see if i can figure this out. Hopefully, I can get things going to be able to help some people out.
If anyone has any ideas, they would be greatly appreciated.
My only other alternative is spending $2000 for the thunderbolt capable NAS that Apple sells - it's only money!
Cesar

Apple TV 2 choppy video playback when mirroring from Macbook Pro (Yosemite) and Macbook Air (Yosemite) but not iOS devices

Video playback is choppy (cuts out every 30-45 seconds) when air playing from both my MacBook Air 1.3 GHz Intel Core i5 running Yosemite and my husbands new MacBook Pro, but runs perfectly when mirroring from any of our iOS devices (iPhone 6+, iPad mini 3, etc.) We have Apple TV 2. This problem just started a few weeks ago, was working fine around Christmas. The problem seems to have coincidentally started right after our son tried plugging in and setting up his Chromecast on our tv. I disconnected the Chromecast, but we still have the problem. All of our software if up to date and I've tried disconnecting blue tooth, we do not have a microwave and our wifi network has a very strong signal. We have an Airport Extreme base station. Is there a solution to our problem?

Hi leahmturner,
I see that you are experiencing an issue with choppiness while AirPlay Mirroring from your computers to your Apple TV. I have an article that contains some helpful troubleshooting steps for you regarding this issue:
About AirPlay Mirroring in OS X - Apple Support
http://support.apple.com/en-us/HT201343
Optimizing image quality
Resolution matching modes
You can choose between two desktop resolution matching modes that let you select which display will have the best image. When AirPlay Mirroring is turned on, select an option under "Match Desktop Size To:" in the AirPlay Mirroring menu extra.
Match Desktop Size To: Apple TV
AirPlay Mirroring changes the desktop resolution to best match your Apple TV, resulting in a 16:9 image that fills the HDTV screen. This setting often produces the sharpest image on the HDTV. The aspect ratio and/or resolution of the built-in Mac display may change to accommodate the Apple TV.
Match Desktop Size To: This Mac
AirPlay Mirroring scales the contents of the desktop to fit on the Apple TV, leaving the resolution of your Mac's display unchanged. Use this setting for the sharpest image on your Mac's display. Depending on your Mac model, the resulting image may not fill the HDTV screen.
Troubleshooting AirPlay Mirroring
If you don't see mirroring options
If your Mac and Apple TV are on the same network, but no AirPlay Mirroring menu appears, your Apple TV may be asleep. Simply press a button on your Apple TV remote to wake it up. After a few seconds, the AirPlay Mirroring menu extra appears. If you still don't see the options you expect, make sure your Apple TV has the current software update installed. Also make sure that you have the "Show mirroring options in the menu bar when available" option selected in the Displays pane of System Preferences.
If the menu bar or Dock is cropped
Some HDTVs have bezels that cover a small percentage of the screen. This can result in a slight cropping of a full-resolution HDTV image. Depending on the HDTV model, AirPlay Mirroring may automatically adjust the picture size to prevent cropping. If you are using OS X Mountain Lion or later, and you see cropping of the menu bar or Dock when using AirPlay Mirroring, toggle the Overscan correction option in Displays preferences.
Minimize video post-processing
HDTVs often apply picture quality enhancements intended to improve the look of film and video sources. In some cases, these enhancements can lead to over-sharpening artifacts when displaying your Mac desktop. Some HDTV models have built-in settings to change or disable the enhancements for use with a computer (computer, presentation, or game modes). Otherwise, the controls for sharpness, detail enhancement and noise reduction can be used to optimize the appearance of the Mac desktop. Consult your HDTV’s manual for guidance on the appropriate settings for use with a computer.
Firewall security settings
If you use a firewall, make sure the following firewall security options have been set to allow AirPlay Mirroring to work:
Choose System Preferences from the Apple menu ().
Click Security & Privacy, then click Firewall.
Click the lock icon to unlock it if it's locked, then type an administrator name and password.
Click Firewall Options.
Deselect (uncheck) the “Block all incoming connections” checkbox.
Select (check) the “Automatically allow signed software to receive incoming connections” checkbox.
Thanks for coming to the Apple Support Communities!
Regards,
Braden

Video playback from Final Cut Pro studders over HDMI

I have a problem playing back video from FCP. The video output will studder during horizontal pans when I output via HDMI. The audio output is not affected.
I have been playing video successfully using FireWire for output in FCP, however, my new video switcher system will not support FireWire output.
What are some possible causes of this problem?
System stats:
* Mac Mini (2010 model)
* 8GB RAM
* OS X 10.6.4 (Snow Leopard)
* Final Cut Pro 7.0.3 (Final Cut Studio 3)

@ Studio X : The files were originally created with Final Cut Pro, rendered out to QuickTime, then are being played back with Final Cut Pro. The file that has the most noticable studdering is a 60-minute timeline sequence in Final Cut. All files are being stored and played back from the Mac Mini's internal hard drive. Everything was originally shot on DV and formatted for a 4:3 aspect ratio.
@ Shane Ross : Are there any settings in the MacOS or FCP where I can improve the HDMI video signal? Or do you know of / have any experience with Firewire to HDMI converters? Unfortunately, my new signal path relies on HDMI from the video playback.
My current setup uses the Firewire output, which is then converted to composite video & analog audio using a pair of ageing DV tape decks. That setup is becoming troublesome due to age.

I just moved my itunes library from a win 7 computer to a win 8.1 computer. Getting an error message "iTunes has detected a problem with your audio configuration. Audio/Video playback may not operate properly. Can't play CDs or get audio file from web!

Help! I just moved my itunes library from a Win 7 computer to a new Win 8.1 computer following the instructions on the itunes website. Everything is good except I'm getting an error message on the Win 8 computer if I try to play a CD or get an audio file off of the internet. I get an error message that says "iTunes has detected a problem with your audio configuration. Audio/Video playback may not operate properly. I don't know where to look for or fix the audio configuration on the win 8 computer. As far as I can tell the iTunes configuration looks the same as on the other computers in the house. At this point I don't dare plug my ipod touch into the Win 8 computer for fear it will get messed up.

I have the same problem and I know that it is due to my PCI Audio driver not being compatible with WIndows 8.1.
iTunes isn't the only program that can't direct sound to the built-in speakers anymore. The obvious solution would be to update the drivers, but unfortunately Dell does not provide an updated driver for my model, so I am stuck with that.
However, saying that, only my laptop speakers are affected by this. I can use sound fine on applications where I can choose the output device and direct sound to the head phones, but for some reason iTunes does not let you choose the audio device manually.
To listen to music I imported the iTunes Library in Windows Media Player and changed the audio output using the following instructions: http://windows.microsoft.com/en-us/windows7/c00d11ba
However, I would also like to rent movie's from iTunes,
Would be great if iTunes would let you choose the output device, too, like most other applications using sound from Skype to Windows Media Player,...

Silverlight video playback in SP 2013

Similar Messages

Maybe you are looking for