Simoultaneous drain for two batteries

Hi,
I use a T420s with system battery and ultrabay series 3 battery. Since the machine - as all Thinkpads - first drains the ultrabay battery to 0%, then starts draining the system battery, my ultrabay batteries tend to live a short and cruel life and lose capacity very soon. Example: after 30 cycles or so, 30% of the capacity is gone - much more than you would lose if you discharged both batteries simultaneously and started charging both batteries at say 10% instead of draining it to zero.
Now, for linux, there's a script that does exactly this, cf. http://www.thinkwiki.org/wiki/How_to_use_Ultrabay_batteries . This prooves that it is technically  possible to make the batteries drain simultaneously. (And there's also a good explanation for why one would want to do it that way.)
I'm asking for the integration of a "switchable" draining setting for simultaneous/subsequential draining of the two batteries into the power managing tool, BIOS or whichever way of integration you prefer.
Regards,
- elarei, Germany

I've been asking for that too, and agree that it is a great idea.  I wish I could tell you that we had plans to implement such a feature, but right now, I can't
But draining the battery to 0% isn't really 0% capacity of the battery.  The 100% charge of the battery is normally 4.2 volts.  The 0% charge state is really 3.0 volts.  So when the battery reports 0% it is not really zero volts because the cell must be kept at higher state of charge for the health of the battery.  The battery firmware is intelligent enough not to let the battery discharge to a point where the battery health is impacted.
Having said that if you are really losing 30% capacity after 30 cycles, there is something wrong with your battery and I think you should be able to get it replaced under warranty.
Sorry I don't have better news about your feature request, it really is a great idea and I wish we were working on it.

Similar Messages

  • Battery management for T440s (two batteries), with tpacpi-bat ?

    Hi everybody,
    the latest ThinkPad T440s has two batteries, one internal, one external.
    Now, i followed the guide to enhance battery lifespan, as described in the T420 wiki article.
    (https://wiki.archlinux.org/index.php/Le … 0#Tp_smapi)
    But, with the two batteries, only one gets charged to the specified threshold, while the other one (probably the internal one ?)
    remains stuck at 51% ...
    Is there a way to charge both batteries to threshold, without physically removing one ?
    Regards,
    N
    EDIT: Ok, just found out that tp_smapi isn't really supported at all, so what i'm talking about are the tpacpi-bat scripts ...
    Last edited by oxygen_wobble (2015-03-10 20:11:36)

    My machine will charge the internal battery to somewhere around 70%, then charge the removable battery pretty much all the way, then come back and top off the internal.  It does this without any scripts or attempts to control battery thresholds.  The firmware alone handles this.
    I do have various powertop recommended settings that allow for longer battery life.  But as far as attempting to control battery thresholds, I figure that all batteries wear out eventually... and that takes a bit, so why not just allow them to do what the firmware intends?

  • I will be out of town for two months, will my MacBook Pro drain out by then?

    I will be out of town for two months, will my MacBook Pro drain out by then?
    If yes what precautions should I take??

    mmnoble88,
    I mean that it should not be charged higher than 50% prior to a period of not being used. If its battery is higher than 50% just before you head out of town, you should let it discharge until it’s at 50% or less.

  • Usign two batteries together? Larger battery with better capacity?

    I am considering to buy a MacBook, and operate it entirely on batteries. I'm electro-sensitive.
    Is it possible to use two batteries together?
    It it possible to have a larger battery which lasts more time?

    It is not possible to install two factory batteries at the same time.
    But, it is possible to use two batteries together (sort of).
    For the PowerBook and iBook, there are after-market battery options that provide you with extended battery run-time.
    Essentially, they are large and flat batteries that are approximately the same length and width as the iBook or PowerBook.
    They are very thin, and essentially look like a small plate.
    Basically, they plug into the iBook or PowerBook's power port, and provide it with power just as if it were plugged into the wall.
    So, the computer believes that it is getting power from the wall adapter. Then, when that battery drains, it moves onto using the standard battery.
    One such device is available here:
    http://www.lindelectronics.com/cgi-bin/store/shop.cgi//ppack/x/dbxgen_ppackmfgs/
    There are many different companies that I have seen selling these types of devices. So, you can look around.
    I don't expect that there are any available for the MacBook or MacBook Pro yet (since they use a different style connector). But, I imagine that such an option will appear in the future.
    Hope this helps.

  • My battery is getting drained in two hours after getting hot. What's the solution?

    My battery is getting drained in two hours after getting hot. What's the solution?

    Do you mean your iPhone was exposed to high temperature and now the battey life is very short?  If so, take it to an Apple store genius bar and have the techs check the battery and see if it needs to be replaced.  Lithium-Ion batteries are very sensitive to high temperature so there may be damage to your battery if it got very hot.

  • My ipod has been stuck on the apple logo for two days

    my ipod has been stuck on the apple logo for two days after plugging my ipod into a macbook that has recently jailbroke a friends ipod. i did not jailbreak but my ipod still crashed. my home button is broken so i am not able to do all these home remedies i find on the internet. can apple help me or should i just give up on my ipod?

    Place the iPod in recovery mode using one of these programs and then restore via iTunes:
    For PC
    RecBoot: Easy Way to Put iPhone into Recovery Mode
    If necessary:
    Download QTMLClient.dll & iTunesMobileDevice.dll for RecBoot
    and                                           
    RecBoot tip
    RecBoot may have problems on 64X windows, then try:
    Tenorshare ReiBoot – Enter & Exit iPhone, iPad, iPod Recovery Mode with a Single Click
    For MAC or PC       
    The Firmware Umbrella - TinyUmbrella
    Installs blootware on PC too
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try another cable
    - Try on another computer                            
      - If still not successful that usually indicates a hardware problem

  • Do batteries come with a warranty? going on number 4 for bad batteries

    I'm on my third battery, actually have had it for a while so it may just be time for a new one, but I've always seem to have a problem with them and when I get a new one, does it come with a warranty or anything? I don't see that on Apple store or anything, I just don't want to spend that kind of money on a 4th battery and have it not last. I've never had a battery get to the 300 cycle count and they barely last an hour. I do calibrate it from time to time too.
    Here's my specs of the battery I have now:
    Battery Installed: Yes
    First low level warning: No
    Full Charge Capacity (mAh): 3125
    Remaining Capacity (mAh): 2867
    Amperage (mA): -1508
    Voltage (mV): 11817
    Cycle Count: 167
    My Macbook warranty just got finished a couple months ago so I assume I have to buy a new battery, just want to know if that battery comes with some warranty in case I get another crappy one

    No they do not -- but it depends on your situation.
    How old is your MBP? Your MBP carries a one year warranty during which time it includes free battery replacement if something goes wrong. If you purchase the Apple Care warranty, it covers free battery replacement for two more years.
    However, your 167-cycle battery reading on your post is only about half the cycle charges you should be getting....
    If this is the 4th battery replacement, there is something seriously wrong not with your battery, but with the electrics of your MBP itself. You should bring it in for service if you are under warranty and let them look at all the power things, and see where your drain is coming from.
    APple Battery's are rated for about 300 recharge cycles (about 2 years of normal daily usage). There is something wrong with your machine.

  • How Do I Use One PC (Windows) To Run iCloud Photo Stream for Two Users?

    How Do I Use One PC (Windows) To Run iCloud Photo Stream for Two Users? I and my wife have two Iphones (iOS 6.1.4) and we want to have use 2 iCloud accounts for one PC.

    Disregard the question. The solution has nothing to do with any "Firefox bug". Turns out that my session wasn't being managed properly. Or rather, I was accidentally deleting other users' information when new users logged in. So if I had user 1 and user 2, and user 2 logged in after user 1, some of user 1's information would be deleted, resulting in the errors.
    Oops; sorry about the false alarm. :)
    (Was hoping to retract the question, but it looks like others have a similar problem.)

  • HT204053 Can I use one Apple ID for two Apple IPhones?

    Can I use one Apple ID for two Apple IPhones? I received an answer of yes.
    Now another question.  I have one ICloud Account, Two IPhones.  Can I use Find my IPhone via the one ICloud Account?  Can I see two IPhones on the map at the same time?  or do I need to view the second phone via some other method.
    Message was edited by: Hunter3D

    Yes.
    Cheers,
    GB

  • One apple id for two iPhone

    Is it possible tou use just one aple id for two iPhones?

    Read here:
    http://support.apple.com/kb/HT1495

  • I recently connected my new ipad to my itunes, but now itunes will not recognise my ipod classic, and 50gig of music has gone. ipad connects ok but no longer ipod which has been there for two years! help!!!

    I recently connected my new ipad to my itunes, but now itunes will not recognise my ipod classic, and 50gig of music has gone. ipad connects ok but no longer ipod which has been there for two years! help!!!

    What happens when the iPod is plugged in?  anything?  any errors?
    Why is 50GB of music gone?  All music should exist on the computer.  Only a fool would rely on a single device which could easily be lost or stolen to store their content on.

  • Have family plan with 250 data which I almost use each month.  Going on vacation and will be on the road for two weeks.  Should I up my data for a month then change back.  Is it worth it or should I just run over and pay the extra 15 per gig?

    have family plan with 250 data which I almost use each month.  Going on vacation and will be on the road for two weeks.  Should I up my data for a month then change back.  Is it worth it or should I just run over and pay the extra 15 per gig?

    Hello mlazaretti. Vacation time is awesome. (Especially a road trip!) Since you will be going out for two weeks, you never know if having extra data may come in handy. I highly recommend switching to the next tier up so this way you have more data. This way it is only $10.00 more versus $15.00, and you dont have to worry about overages. Then change back at the start of the next billing cycle.
    If you need help making this change let us know! Have a safe trip!
    NicandroN_VZW
    Follow us on twitter @VZWSupport

  • How to do Apache configuration for two different domains

    Hi ,
    I was just trying out some clustering workshop on weblogic. I faced a issue..here is the scenario :
    I have two clusters :
    Cluster1 : 3 managed servers (server1,server2,server3)
    Cluster2 : 2managed servers (server4,server5)
    I have two sample applications which i have deployed on these two clusters i.e app1 on cluster1 and app2 on cluster2.
    These two aplications are deployed successsfully as i am able to open these applicatons from browser by calling the individual port of the managed server like : http://localhost:7003/app1.
    Now i have installed a apache server on my laptop and configured the http.conf file.
    Issue : I am not able to call both the application from apache. If there is only one cluster then it is working fine and for two application only one cluster (application) is working that too whose port is defined in the last.
    Here are the contents of my httpd.conf file :
    # This is the main Apache HTTP server configuration file. It contains the
    # configuration directives that give the server its instructions.
    # See <URL:http://httpd.apache.org/docs/2.2> for detailed information.
    # In particular, see
    # <URL:http://httpd.apache.org/docs/2.2/mod/directives.html>
    # for a discussion of each configuration directive.
    # Do NOT simply read the instructions in here without understanding
    # what they do. They're here only as hints or reminders. If you are unsure
    # consult the online docs. You have been warned.
    # Configuration and logfile names: If the filenames you specify for many
    # of the server's control files begin with "/" (or "drive:/" for Win32), the
    # server will use that explicit path. If the filenames do not begin
    # with "/", the value of ServerRoot is prepended -- so "logs/foo.log"
    # with ServerRoot set to "C:/Program Files/Apache Software Foundation/Apache2.2" will be interpreted by the
    # server as "C:/Program Files/Apache Software Foundation/Apache2.2/logs/foo.log".
    # NOTE: Where filenames are specified, you must use forward slashes
    # instead of backslashes (e.g., "c:/apache" instead of "c:\apache").
    # If a drive letter is omitted, the drive on which httpd.exe is located
    # will be used by default. It is recommended that you always supply
    # an explicit drive letter in absolute paths to avoid confusion.
    # ServerRoot: The top of the directory tree under which the server's
    # configuration, error, and log files are kept.
    # Do not add a slash at the end of the directory path. If you point
    # ServerRoot at a non-local disk, be sure to point the LockFile directive
    # at a local disk. If you wish to share the same ServerRoot for multiple
    # httpd daemons, you will need to change at least LockFile and PidFile.
    ServerRoot "C:/Program Files/Apache Software Foundation/Apache2.2"
    # Listen: Allows you to bind Apache to specific IP addresses and/or
    # ports, instead of the default. See also the <VirtualHost>
    # directive.
    # Change this to Listen on specific IP addresses as shown below to
    # prevent Apache from glomming onto all bound IP addresses.
    #Listen 12.34.56.78:80
    Listen 80
    # Dynamic Shared Object (DSO) Support
    # To be able to use the functionality of a module which was built as a DSO you
    # have to place corresponding `LoadModule' lines at this location so the
    # directives contained in it are actually available before they are used.
    # Statically compiled modules (those listed by `httpd -l') do not need
    # to be loaded here.
    # Example:
    # LoadModule foo_module modules/mod_foo.so
    LoadModule actions_module modules/mod_actions.so
    LoadModule alias_module modules/mod_alias.so
    LoadModule asis_module modules/mod_asis.so
    LoadModule auth_basic_module modules/mod_auth_basic.so
    #LoadModule auth_digest_module modules/mod_auth_digest.so
    #LoadModule authn_alias_module modules/mod_authn_alias.so
    #LoadModule authn_anon_module modules/mod_authn_anon.so
    #LoadModule authn_dbd_module modules/mod_authn_dbd.so
    #LoadModule authn_dbm_module modules/mod_authn_dbm.so
    LoadModule authn_default_module modules/mod_authn_default.so
    LoadModule authn_file_module modules/mod_authn_file.so
    #LoadModule authnz_ldap_module modules/mod_authnz_ldap.so
    #LoadModule authz_dbm_module modules/mod_authz_dbm.so
    LoadModule authz_default_module modules/mod_authz_default.so
    LoadModule authz_groupfile_module modules/mod_authz_groupfile.so
    LoadModule authz_host_module modules/mod_authz_host.so
    #LoadModule authz_owner_module modules/mod_authz_owner.so
    LoadModule authz_user_module modules/mod_authz_user.so
    LoadModule autoindex_module modules/mod_autoindex.so
    #LoadModule cache_module modules/mod_cache.so
    #LoadModule cern_meta_module modules/mod_cern_meta.so
    LoadModule cgi_module modules/mod_cgi.so
    #LoadModule charset_lite_module modules/mod_charset_lite.so
    #LoadModule dav_module modules/mod_dav.so
    #LoadModule dav_fs_module modules/mod_dav_fs.so
    #LoadModule dav_lock_module modules/mod_dav_lock.so
    #LoadModule dbd_module modules/mod_dbd.so
    #LoadModule deflate_module modules/mod_deflate.so
    LoadModule dir_module modules/mod_dir.so
    #LoadModule disk_cache_module modules/mod_disk_cache.so
    #LoadModule dumpio_module modules/mod_dumpio.so
    LoadModule env_module modules/mod_env.so
    #LoadModule expires_module modules/mod_expires.so
    #LoadModule ext_filter_module modules/mod_ext_filter.so
    #LoadModule file_cache_module modules/mod_file_cache.so
    #LoadModule filter_module modules/mod_filter.so
    #LoadModule headers_module modules/mod_headers.so
    #LoadModule ident_module modules/mod_ident.so
    #LoadModule imagemap_module modules/mod_imagemap.so
    LoadModule include_module modules/mod_include.so
    #LoadModule info_module modules/mod_info.so
    LoadModule isapi_module modules/mod_isapi.so
    #LoadModule ldap_module modules/mod_ldap.so
    #LoadModule logio_module modules/mod_logio.so
    LoadModule log_config_module modules/mod_log_config.so
    #LoadModule log_forensic_module modules/mod_log_forensic.so
    #LoadModule mem_cache_module modules/mod_mem_cache.so
    LoadModule mime_module modules/mod_mime.so
    #LoadModule mime_magic_module modules/mod_mime_magic.so
    LoadModule negotiation_module modules/mod_negotiation.so
    #LoadModule proxy_module modules/mod_proxy.so
    #LoadModule proxy_ajp_module modules/mod_proxy_ajp.so
    #LoadModule proxy_balancer_module modules/mod_proxy_balancer.so
    #LoadModule proxy_connect_module modules/mod_proxy_connect.so
    #LoadModule proxy_ftp_module modules/mod_proxy_ftp.so
    #LoadModule proxy_http_module modules/mod_proxy_http.so
    #LoadModule proxy_scgi_module modules/mod_proxy_scgi.so
    #LoadModule reqtimeout_module modules/mod_reqtimeout.so
    #LoadModule rewrite_module modules/mod_rewrite.so
    LoadModule setenvif_module modules/mod_setenvif.so
    #LoadModule speling_module modules/mod_speling.so
    #LoadModule ssl_module modules/mod_ssl.so
    #LoadModule status_module modules/mod_status.so
    #LoadModule substitute_module modules/mod_substitute.so
    #LoadModule unique_id_module modules/mod_unique_id.so
    #LoadModule userdir_module modules/mod_userdir.so
    #LoadModule usertrack_module modules/mod_usertrack.so
    #LoadModule version_module modules/mod_version.so
    #LoadModule vhost_alias_module modules/mod_vhost_alias.so
    LoadModule weblogic_module modules/mod_wl.so
    *<IfModule mod_weblogic.c>*
    WebLogicCluster 127.0.0.1:7005,127.0.0.1:7007,127.0.0.1:7003,127.0.0.1:7103,127.0.0.1:7104
    MatchExpression /app1
    *</IfModule>*
    *<Location /weblogic>*
    SetHandler weblogic-handler
    WebLogicCluster 127.0.0.1:7003,127.0.0.1:7005,127.0.0.1:7007,127.0.0.1:7103,127.0.0.1:7104
    DebugConfigInfo ON
    PathTrim /weblogic
    *</Location>*
    *<IfModule mod_weblogic.c>*
    WebLogicCluster 127.0.0.1:7003,127.0.0.1:7005,127.0.0.1:7007
    MatchExpression /app2
    *</IfModule>*
    *<Location /weblogic>*
    SetHandler weblogic-handler
    WebLogicCluster 127.0.0.1:7003,127.0.0.1:7005,127.0.0.1:7007
    DebugConfigInfo ON
    PathTrim /weblogic
    *</Location>*
    <IfModule !mpm_netware_module>
    <IfModule !mpm_winnt_module>
    # If you wish httpd to run as a different user or group, you must run
    # httpd as root initially and it will switch.
    # User/Group: The name (or #number) of the user/group to run httpd as.
    # It is usually good practice to create a dedicated user and group for
    # running httpd, as with most system services.
    User daemon
    Group daemon
    </IfModule>
    </IfModule>
    # 'Main' server configuration
    # The directives in this section set up the values used by the 'main'
    # server, which responds to any requests that aren't handled by a
    # <VirtualHost> definition. These values also provide defaults for
    # any <VirtualHost> containers you may define later in the file.
    # All of these directives may appear inside <VirtualHost> containers,
    # in which case these default settings will be overridden for the
    # virtual host being defined.
    # ServerAdmin: Your address, where problems with the server should be
    # e-mailed. This address appears on some server-generated pages, such
    # as error documents. e.g. [email protected]
    ServerAdmin <adminurl>
    # ServerName gives the name and port that the server uses to identify itself.
    # This can often be determined automatically, but we recommend you specify
    # it explicitly to prevent problems during startup.
    # If your host doesn't have a registered DNS name, enter its IP address here.
    #ServerName <servername>
    # DocumentRoot: The directory out of which you will serve your
    # documents. By default, all requests are taken from this directory, but
    # symbolic links and aliases may be used to point to other locations.
    DocumentRoot "C:/Program Files/Apache Software Foundation/Apache2.2/htdocs"
    # Each directory to which Apache has access can be configured with respect
    # to which services and features are allowed and/or disabled in that
    # directory (and its subdirectories).
    # First, we configure the "default" to be a very restrictive set of
    # features.
    <Directory />
    Options FollowSymLinks
    AllowOverride None
    Order deny,allow
    Deny from all
    </Directory>
    # Note that from this point forward you must specifically allow
    # particular features to be enabled - so if something's not working as
    # you might expect, make sure that you have specifically enabled it
    # below.
    # This should be changed to whatever you set DocumentRoot to.
    <Directory "C:/Program Files/Apache Software Foundation/Apache2.2/htdocs">
    # Possible values for the Options directive are "None", "All",
    # or any combination of:
    # Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews
    # Note that "MultiViews" must be named explicitly --- "Options All"
    # doesn't give it to you.
    # The Options directive is both complicated and important. Please see
    # http://httpd.apache.org/docs/2.2/mod/core.html#options
    # for more information.
    Options Indexes FollowSymLinks
    # AllowOverride controls what directives may be placed in .htaccess files.
    # It can be "All", "None", or any combination of the keywords:
    # Options FileInfo AuthConfig Limit
    AllowOverride None
    # Controls who can get stuff from this server.
    Order allow,deny
    Allow from all
    </Directory>
    # DirectoryIndex: sets the file that Apache will serve if a directory
    # is requested.
    <IfModule dir_module>
    DirectoryIndex index.html
    </IfModule>
    # The following lines prevent .htaccess and .htpasswd files from being
    # viewed by Web clients.
    <FilesMatch "^\.ht">
    Order allow,deny
    Deny from all
    Satisfy All
    </FilesMatch>
    # ErrorLog: The location of the error log file.
    # If you do not specify an ErrorLog directive within a <VirtualHost>
    # container, error messages relating to that virtual host will be
    # logged here. If you do define an error logfile for a <VirtualHost>
    # container, that host's errors will be logged there and not here.
    ErrorLog "logs/error.log"
    # LogLevel: Control the number of messages logged to the error_log.
    # Possible values include: debug, info, notice, warn, error, crit,
    # alert, emerg.
    LogLevel warn
    <IfModule log_config_module>
    # The following directives define some format nicknames for use with
    # a CustomLog directive (see below).
    LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined
    LogFormat "%h %l %u %t \"%r\" %>s %b" common
    <IfModule logio_module>
    # You need to enable mod_logio.c to use %I and %O
    LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" %I %O" combinedio
    </IfModule>
    # The location and format of the access logfile (Common Logfile Format).
    # If you do not define any access logfiles within a <VirtualHost>
    # container, they will be logged here. Contrariwise, if you do
    # define per-<VirtualHost> access logfiles, transactions will be
    # logged therein and not in this file.
    CustomLog "logs/access.log" common
    # If you prefer a logfile with access, agent, and referer information
    # (Combined Logfile Format) you can use the following directive.
    #CustomLog "logs/access.log" combined
    </IfModule>
    <IfModule alias_module>
    # Redirect: Allows you to tell clients about documents that used to
    # exist in your server's namespace, but do not anymore. The client
    # will make a new request for the document at its new location.
    # Example:
    # Redirect permanent /foo http://<url>/bar
    # Alias: Maps web paths into filesystem paths and is used to
    # access content that does not live under the DocumentRoot.
    # Example:
    # Alias /webpath /full/filesystem/path
    # If you include a trailing / on /webpath then the server will
    # require it to be present in the URL. You will also likely
    # need to provide a <Directory> section to allow access to
    # the filesystem path.
    # ScriptAlias: This controls which directories contain server scripts.
    # ScriptAliases are essentially the same as Aliases, except that
    # documents in the target directory are treated as applications and
    # run by the server when requested rather than as documents sent to the
    # client. The same rules about trailing "/" apply to ScriptAlias
    # directives as to Alias.
    ScriptAlias /cgi-bin/ "C:/Program Files/Apache Software Foundation/Apache2.2/cgi-bin/"
    </IfModule>
    <IfModule cgid_module>
    # ScriptSock: On threaded servers, designate the path to the UNIX
    # socket used to communicate with the CGI daemon of mod_cgid.
    #Scriptsock logs/cgisock
    </IfModule>
    # "C:/Program Files/Apache Software Foundation/Apache2.2/cgi-bin" should be changed to whatever your ScriptAliased
    # CGI directory exists, if you have that configured.
    <Directory "C:/Program Files/Apache Software Foundation/Apache2.2/cgi-bin">
    AllowOverride None
    Options None
    Order allow,deny
    Allow from all
    </Directory>
    # DefaultType: the default MIME type the server will use for a document
    # if it cannot otherwise determine one, such as from filename extensions.
    # If your server contains mostly text or HTML documents, "text/plain" is
    # a good value. If most of your content is binary, such as applications
    # or images, you may want to use "application/octet-stream" instead to
    # keep browsers from trying to display binary files as though they are
    # text.
    DefaultType text/plain
    <IfModule mime_module>
    # TypesConfig points to the file containing the list of mappings from
    # filename extension to MIME-type.
    TypesConfig conf/mime.types
    # AddType allows you to add to or override the MIME configuration
    # file specified in TypesConfig for specific file types.
    #AddType application/x-gzip .tgz
    # AddEncoding allows you to have certain browsers uncompress
    # information on the fly. Note: Not all browsers support this.
    #AddEncoding x-compress .Z
    #AddEncoding x-gzip .gz .tgz
    # If the AddEncoding directives above are commented-out, then you
    # probably should define those extensions to indicate media types:
    AddType application/x-compress .Z
    AddType application/x-gzip .gz .tgz
    # AddHandler allows you to map certain file extensions to "handlers":
    # actions unrelated to filetype. These can be either built into the server
    # or added with the Action directive (see below)
    # To use CGI scripts outside of ScriptAliased directories:
    # (You will also need to add "ExecCGI" to the "Options" directive.)
    #AddHandler cgi-script .cgi
    # For type maps (negotiated resources):
    #AddHandler type-map var
    # Filters allow you to process content before it is sent to the client.
    # To parse .shtml files for server-side includes (SSI):
    # (You will also need to add "Includes" to the "Options" directive.)
    #AddType text/html .shtml
    #AddOutputFilter INCLUDES .shtml
    </IfModule>
    # The mod_mime_magic module allows the server to use various hints from the
    # contents of the file itself to determine its type. The MIMEMagicFile
    # directive tells the module where the hint definitions are located.
    #MIMEMagicFile conf/magic
    # Customizable error responses come in three flavors:
    # 1) plain text 2) local redirects 3) external redirects
    # Some examples:
    #ErrorDocument 500 "The server made a boo boo."
    #ErrorDocument 404 /missing.html
    #ErrorDocument 404 "/cgi-bin/missing_handler.pl"
    #ErrorDocument 402<url>/subscription_info.html
    # EnableMMAP and EnableSendfile: On systems that support it,
    # memory-mapping or the sendfile syscall is used to deliver
    # files. This usually improves server performance, but must
    # be turned off when serving from networked-mounted
    # filesystems or if support for these functions is otherwise
    # broken on your system.
    #EnableMMAP off
    #EnableSendfile off
    # Supplemental configuration
    # The configuration files in the conf/extra/ directory can be
    # included to add extra features or to modify the default configuration of
    # the server, or you may simply copy their contents here and change as
    # necessary.
    # Server-pool management (MPM specific)
    #Include conf/extra/httpd-mpm.conf
    # Multi-language error messages
    #Include conf/extra/httpd-multilang-errordoc.conf
    # Fancy directory listings
    #Include conf/extra/httpd-autoindex.conf
    # Language settings
    #Include conf/extra/httpd-languages.conf
    # User home directories
    #Include conf/extra/httpd-userdir.conf
    # Real-time info on requests and configuration
    #Include conf/extra/httpd-info.conf
    # Virtual hosts
    #Include conf/extra/httpd-vhosts.conf
    # Local access to the Apache HTTP Server Manual
    #Include conf/extra/httpd-manual.conf
    # Distributed authoring and versioning (WebDAV)
    #Include conf/extra/httpd-dav.conf
    # Various default settings
    #Include conf/extra/httpd-default.conf
    # Secure (SSL/TLS) connections
    #Include conf/extra/httpd-ssl.conf
    # Note: The following must must be present to support
    # starting without SSL on platforms with no /dev/random equivalent
    # but a statically compiled-in mod_ssl.
    <IfModule ssl_module>
    SSLRandomSeed startup builtin
    SSLRandomSeed connect builtin
    </IfModule>
    So here for the above configuration only app2 i am able to call and for app1 its saying "404 page not found".
    Can soomebody help me in cofiguring apache so that i can call both the applications.
    Thanks,
    Ankit

    >
    <IfModule mod_weblogic.c>
    WebLogicCluster 127.0.0.1:7005,127.0.0.1:7007,127.0.0.1:7003,127.0.0.1:7103,127.0.0.1:7104
    MatchExpression /app1
    </IfModule>
    <Location /weblogic>
    SetHandler weblogic-handler
    WebLogicCluster 127.0.0.1:7003,127.0.0.1:7005,127.0.0.1:7007,127.0.0.1:7103,127.0.0.1:7104
    DebugConfigInfo ON
    PathTrim /weblogic
    </Location>
    <IfModule mod_weblogic.c>
    WebLogicCluster 127.0.0.1:7003,127.0.0.1:7005,127.0.0.1:7007
    MatchExpression /app2
    </IfModule>
    <Location /weblogic>
    SetHandler weblogic-handler
    WebLogicCluster 127.0.0.1:7003,127.0.0.1:7005,127.0.0.1:7007
    DebugConfigInfo ON
    PathTrim /weblogic
    </Location>
    >
    This configuration is weird little bit. There is MatchExpression /app1 and MatchExpression /app2 and at the same time two <Location /weblogic> sections. Are you sure you understand what that configuration stands for?
    Try something like this ...
    <Location /app1>
    SetHandler weblogic-handler
    WebLogicCluster 127.0.0.1:7003,127.0.0.1:7005,127.0.0.1:7007,127.0.0.1:7103,127.0.0.1:7104
    DebugConfigInfo ON
    </Location>
    <Location /app2>
    SetHandler weblogic-handler
    WebLogicCluster 127.0.0.1:7003,127.0.0.1:7005,127.0.0.1:7007
    DebugConfigInfo ON
    </Location>
    where /app1 and /app2 are contexts of your weblogic applications.
    http://download.oracle.com/docs/cd/E11035_01/wls100/plugins/apache.html
    http://httpd.apache.org/docs/2.0/mod/core.html#location

  • HT1904 I HAVE SPOKEN WITH APPLE AND THEY HELPED ME AS I HAVE CANCER AND THIS IS MY COMFORT THE VIDEOS HELP TAKE AWAY MY PAIN,NOW THE ID AND PASSWORD ARE NOT BEING ACCEPTED AGAIN IHAVE HAD SAME FOR TWO YRS .

    I am having a problem with loging in to my apps as i have had same id and password for all and for two years . youtube music video's helped get through the pain of cancer and the computer help me conect to my friend then i went to mail and i was recieving nothing my doctors all have same passwords and lawyers ,and it would be hard and i could never remember many password changes as i was fine with   ,now this is second time google caused this problem and said i must change password as i belived again and did with out anyone accepting it .i con not recieve mail, or go to face book,or google search as was my only browser and they will not accept my id as they say it is wrong as does all othe web sites as well as youtube i am at a loss . please help me .   Sincerely Debra Rossi Jones
    <Email Edited by Host>

    We are fellow users here on these public forums, you're not talking to iTunes Support - I've asked the hosts to remove your email addresses and password from your post. If that is your current password that you've posted for everyone to see then you should change it IMMEDIATELY.
    I'm not sure that I understand all of your post. By 'google' do you mean your gmail email accounts ? If you do then how are you trying to access your email, via the Mail app and/or another app on your phone, the Mail program or a browser on your Mac ? If you are using the Mail app on your phone and you've checked your email account's password then you should be able to add that new password on your phone by tapping on the email account in Settings > Mail, Contacts, Calendars, then tap on the 'account' at the top of the next screen, and you should then be able to enter the new password. If you are using the Facebook app on your iPhone, and you've changed the password for logging into Facebook, then you should be able to update it on your phone via Settings > Facebook
    If you are using the Mail app on your Mac, then to change your gmail password in it (assuming that you've changed the password for it) then go into Mail > Preferences (command-comma), select the Accounts tab on the preferences, select the gmail account on the list of accounts, and on the right-hand side of that screen you should be able to update its password.
    If the problems are on your Mac then you might be better off re-posting in one of the other forums (e.g. Safari, and there are forums for various Mac OS X versions), and there is also a Using iPhone forum - this forum is for the iTunes Store e.g. buying, downloading content from iTunes.

  • My Apple ID is valid but My icloud account does recognize it. I've had iPod touch for two years

    I've had I iPod touch for two years and have find my iPhone on it. I've lost it and now when I try to look for it it says my Apple ID is valid but does not have an icloud  account. Like I said I set it all up when I first got it and use it a few times why won't it work now and is there some way to reassociate it with my ID. Is there somewhere my info is stored?

    Do you another Apple device that is eligible for an iCloud account and is using that iCloud account?
    http://support.apple.com/kb/HT4759
    I suspect not and that the iPod has been restored and thus your account removed for the iPod. Then you iCloud account was deleted since you not longer have a device using it.

Maybe you are looking for