Simple button rollover effect help needed - please help!

Hi everyone,
I was hoping someone could tell me how was this rollover
effect done - can be seen on the small map on the right:
http://www.refinery29.com/
What I want to do is to be able to have the same effect on
rollover and rollout just reversed (fade in - fade out).
Please help!!
THANKS

quote:
Originally posted by:
NedWebs
That naming at both ends is something I consider a fluke in
Flash's design, but only because I don't know why it won't work the
way you probably had it.
There's probably some logical explanation, but I haven't
found it, just the solution for when it happens
It's such a minor little detail. I suspected it would be
something this small, as that's usually the case, but I just
couldn't put my finger on it. Not one of the places I researched
made any reference to that when they said to name the instance of
the button. How stupid.
Anyway, thank you again. I can finally move forward. This was
driving me mad.

Similar Messages

Menu Rollover Effects... please help

I'm trying to make a menu that does sort of a cover-up slide
motion, and text raising effect when the mouse moves over it.
I've got the movie clips finished, and they do what I need
them to, but when I preview my project, the animation/effect
continuously runs, rather than just running during mouse rollover.
I'm assuming it's either a problem with my invisible buttons, or my
action script, but honestly I don't even know where to start. I've
started over from scratch at least 13 times now, and still I can't
figure this thing out. Any advice would be greatly appreciated,
thanks.

first, put a stop() action on the first frame and last frame
of the MC. then use gotoAndPlay(2) in a onRollOver handler, the MC
will then play though once and stop at the end. then in the
onRollOut handler use gotoAndStop(1); to reset the animation to the
begining.

Urgent help needed, please help me

Hi,
I am developing a web site using Java Servlets. The site requires to send XML as POST to an HTTPS server and get the response.
Development environment:
Laptop running Windows XP with jdk1.3.1, j2sdkee1.3 and Tomcat 4.1.
Since I need to use https request from the servlet, I am using the following code;
URL url = new URL("https://www.somesite.com");
HttpsURLConnection connection = (HttpsURLConnection) url.openConnection();
To use the above code I downloaded the jsse1.0.3_03 package from the sun website and added the three jar files to the appropriate location. Also edited the java.security file.
The program compiles and when deployed to the web server, it works great.
Now the problem;
I need to deploy the web site in a server that is connected to the internet. This server is running Windows 2000 Server. It has the same jdk1.3.1, j2sdkee1.3 and Tomcat 4.1. Also I added the three jar files from jsse1.0.3_03. I also updated the classpath in the environment variable accordingly.
Everything is pretty much similar to the Laptop that I use to develop the site except that the OS is Windows 2000 Server.
But when I deployed the class files to the web server and tested the site, the servlet gave the following error:
"unknown protocol: https"
What could be wrong? I really need to fix this issue as soon as possible and any input from you will be highly appreciated.
Thanks in advance,
Rajesh

Hi,
I used java class as beans and added to JSP page as follows (the code is not complete, I am just giving the parts that are relevant);
login.java: Implementation of login to access the database
*through JDBC. Uses MySQL.
Last Modified: 03.22.03
package user;
import java.sql.*;
import java.util.*;
public class login
     private static Statement statement;
     private static Connection database;
     private static String jdbcDriver = "org.gjt.mm.mysql.Driver";
     private static String source = "jdbc:mysql://127.0.0.1/user";
     private static String username = "user";
     private static String password = "passwordforuser";
     Constructor for initializing the connection to the database
     public login()
          try
               Class.forName(jdbcDriver);
               database = DriverManager.getConnection(source, username, password);
               statement = database.createStatement();
          catch (Exception e)
               System.out.println("Error (From loginDatabase Constructor): " + e.getMessage());
     Used to check the users
     public String checkUser(String userName, String passwd) throws Exception
          try
               ResultSet names = statement.executeQuery("SELECT username, passwd FROM users");
               while (names.next())
               return "success";
               return "wronguser";
          catch (Exception e)
               throw e;

<%@ page import="user.login" %>
<jsp:useBean id="login" scope="page" class="user.login" />
<jsp:setProperty name="login" property="*" />
<html>
<head>
<title>Login</title>
</head>
<body bgcolor="#3366FF" link="#000000" vlink="#000000" alink="#000000">
<table border="0" width="100%" cellspacing="0" cellpadding="0">
<tr>
<% //Login the user and display the status
String loginResult = login.checkUser(request.getParameter("username"), request.getParameter("password"));
if (loginResult.equalsIgnoreCase("success"))
%>
          <h1 align="center">You are successfully logged to the Server!</h1>
<%
%>
</tr>
</table>
</body>
</html>
Hope that helps...
Good luck!
Rajesh

Quciktime pro help needed please help help help help please

We are trying to view our video rushes from a Lacie harddrive hooked up to our Mac laptop. These are supposed to be run through quicktime, which we have installed on the laptop as well as having just bought quicktime pro. However, we keep getting a message that the quicktime we are using has missing components and we need to upgrade, which we have done. But we still are only to get sound on the rushes and not the video images.
We are desperate to see these rushes before our editor gets them and starts to edit. Which means we need to see them now. If anyone is up now and can help and call us to give us advice, we would be most grateful. We will of course call you straight back or if you prefer we can chat on MSN my user name is [email protected]

Hi Mary,
Following our tel. chat I asked the question and, as I suspected, it is a codec issue. In addition it is also a processor speed issue. Below is a reply from Dave Sawyer. a fellow L4, regarding this issue:
I agree also that a single-processor G4 system almost certainly isn't going to handle uncompressed HD content. That's what the Pixlet codec is for; so film producers can view HD content on systems less than DP/Quad G5s. I think they're going to either have to work with more powerful systems (and make sure that they're running FCP5 on them) or get the cameraman to send them the content encoded in Pixlet.
I realise that this may be too late as far as yourselves viewing these video rushes before they go to the editor but hopefully the above info will assist you in the future.
RD

Urgent help needed please help me out

i m trying to make a jar file for my package named as mainPanel
but when i run the gcs.jar file it gives following error " failed to load mainclass menifest attribute from e:/gcs/mainPanel/gcs.jar"
could you please explain me the procedure through an example for making a jar file for a package containing many subfolder.

http://catb.org/esr/faqs/smart-questions.html#urgent

I recently had to restore my Iphone 4s and ever since I cannot double click the home button whilst the phone is locked and change my music. The controls come up and I can adjust the volume but I cannot change the songs. Help needed please!!

I recently had to restore my Iphone 4s and ever since I cannot double click the home button whilst the phone is locked and change my music. The controls come up and I can adjust the volume but I cannot change the songs. Help needed please!!

Have you guys been able to activate your iphone yet? I bought an iphone 4s from eBay and it worked fine, but the previous user had left some data on it, so last night I used the "erased all content and settings" to restore it to factory setting so I can start fresh and restore my backup. But now I'm stuck at the activation screen (I get the same "the activation server is temporarily unavailable") and can't get it to activate, even if I use my old deactivated AT&T sim card (I'm on straighttalk now).
I might try activating it with an active AT&T sim card from my fiancee's phone when she gets home, so I'll let you know how that works outs.
If it's true that the server is down; anyone know when it will be back up again? Thanks in advance.
iPhone 4s iOS 5.1.1 (9B206)
Carrier AT&T 12.0
Modem Firmware 2.0.12

HT4623 iOS 6.1 no longer available because you are no longer connected to the internet- this is what my iphone 4 shows. iv tried switching off again and again, closing apps by double tapping the home button but still not working. please help.

this is what my iphone 4 shows. iv tried switching off again and again, closing apps by double tapping the home button but still not working. please help.
is there any other method to download ios 6.1.2.
my phone is not being recognized by itunes on my new windows 8. neither its working on touch copy.
kindly help.
thanks

well in thatcase, i need another help .
thanks for your instant reply.
i have currently bought a new laptop (windows 8) and my iphone is not being recognized by itunes.
because i have no backup on my previous laptop, i downloaded touchcopy but even touch copy is not recognizing my iphone.

Help needed please.. how do I remove my credit card from itunes? just discovered over $450 of charges when I looked at my email... Kids had no clue they were using our money and not their gift cards

Help needed please.... I just discovered over $450 charges to my credit card from Itunes. The kids had no idea they were using our credit card and not their itunes gift cards and 4 year old just clicks on anything! I didnt save my credit card details so am a bit miffed at this... I cant find anywhere in itunes to remove it. Edit.. but not remove. Editing does not remove it.. HELP

To Contact iTunes Customer Service and request assistance
Use this Link > Apple Support iTunes Store Contact
Accepted forms of payment > http://support.apple.com/kb/HT5552
Changing Account Information > http://support.apple.com/kb/HT1918

Help needed please, with Iphone stuck with apple picture and progress bar after software update attempted

Help needed please, everytime I try to update the software version on my iphone it comes up with a message saying it could not be completed and is now frozen with the apple picture and progress bar on it. Do I unplug it and hope the macbook pro sees it again, I also stupidly did not back up before starting the download which I realise I will have to go back to the previous back up. This keeps happening, everytime I do this type of update, I'm starting to think I should just give up on updating my software on the Iphone. I thought it was happening because I was using a window based computer to do the updates, this time I used my Macbook Pro. Please somebody help

ljm17 wrote:
...This keeps happening, everytime I do this type of update, I...
Then you should know what you need to do... If you don't remember...
See Here > http://support.apple.com/kb/HT1808

HT5282 I my safari automatically wiped when i took update. I am using Mac 10.6.8. Can you please send me how to reinstall it. Due to this my mail email system also effected. can you please help me soon

I my safari automatically wiped when i took update. I am using Mac 10.6.8. Can you please send me how to reinstall it. Due to this my mail email system also effected. can you please help me soon

The reason Safari "wiped" is unknown, but try reapplying the OS X 10.6.8 Combo update here:
Mac OS X 10.6.8 Update Combo v1.1
Your email problems may or may not be related. A more complete explanation of the problem would help.

I have updated itunes and the newest software. My home button does not work. Please help

I have updated itunes and the newest software. My home button does not work. Please help

It could be that your button has justy gone out. You may try getting compressed air to blow out any dust in there. If that doesn't work, you may have to get your button and ribbon replaced.

I cannot turn on my wifi! I have reset and turned off my phone multiple times and the Wifi button is completely greyed out. please help me

I cannot turn on my wifi! I have reset and turned off my phone multiple times and the Wifi button is completely greyed out. please help me

I had the same issue and i just resolved it, I have an iphone 4s and last night was al perfect and this morning i just verified that i had a new updated installed on my phone and my WiFi was disable and did restore as new like crazy until i did this after me being tired of restoring my phone from factory setting and then my lately back up on icloud i did my last move and it got fixed this is what i did ok.
STep #1 Do a back up manualy onto your cmputer throu itunes (NOT ICLOUD) ok
Step #2 after doing the the back up go and do on you phone or throu itunes do the factory reset setting and erase everything and make like new phone
Step #3 Leave yhe iphone conected to Itunes.
Step #4 Once your iphone is reset to factory setting on your Itunes Window will say NO SIM CARD DETECTED before clicking on your right up corner (DONE) slide your phone and it will appear conect to a network do the process and put the pasword of your WiFi and until it says conected,It will say (No Service) but it will be conected to WiFi then click on the Itunes Window (DONE)
Step #5 DO a back up recovery from the last back up you did onto your computer not Icloud ok!!
Step #6 after you recovered your phone from last back up on your computer it will atumaticaly have service and WiFi conection like before..
I hope i did explained well to you i did work for me after 7 hours of doing reset and back up =)

My macbook won't start up i have used the option command p r while holding down power button but not done.. please help guys

my macbook won't start up i have used the option command p r while holding down power button but not done.. please help guys

It not polite to repost asking fro more help three minutes after initial post.
Recovery mode is Command & R keys after depressing and releasing the Power button for a normal startup.
OS X: About OS X Recovery - Apple Support
That only works for Lion and later.
What exactly happens when your try to boot to Recovery?
Try starting in Safe Mode resetting the SMC and NVRAM/PRAM
OS X: What is Safe Boot, Safe Mode?
Intel-based Macs: Resetting the System Management Controller (SMC)
About NVRAM and PRAM
What model MacBook Pro and what OSX version was on the Mac?
Have you tried booting from an OSX install DVD?
When you try to start doe the Power light light?
This is the Mac Pro desktop forum. I requested your post be moved to the MacBook Pro laptop forum.

Some of my Apps don't connect to the internet. For example, NY Times Web App, says it can't connect. But when I access it from Safari it does. I have a number of Apps like this. I've removed and reinstalled and it doesn't help. Please help!

Some of my Apps don't connect to the internet. For example, NY Times Web App, says it can't connect. But when I access it from Safari it does (it is a web site and the App just accesses it form the desktop of the IPAD). I have a number of Apps like this. I've removed and reinstalled and it doesn't help. Please help!
Thank you.

On the wireless networks that your Mac has had trouble connecting to, do you know which Wireless Security type (WEP, WPA, or WPA2) is being used?
If it is WEP, one of the problems is that the actual standard relies on a 10 character HEX key for 40bit WEP and a 26 character HEX key for 128bit WEP. In order to make things easier, vendors use certain algorithms to convert simple alphanumeric passwords (or passphrases) into HEX keys, thus enabling the use of simple easy to remember WEP password rather than lengthy HEX keys. The problem is that different vendors use different algorithms to generate the HEX key and therefore a ASCII password on an AEBS will be hashed differently on a non-Apple client and vice versa. You may find the following Apple Support article helpful.

HT2534 i cannot turn on my wifi? it's on grey area please will anyone help me, please help

i cannot turn on my wifi? it's on grey area please will anyone help me, please help
i cannot turn on my wifi? it's on grey area please will anyone help me, please help

See:
iOS: Wi-Fi or Bluetooth settings grayed out or dim
If not successful, an appointment at the Genius Bar of an Apple store is usually in order.
Apple Retail Store - Genius Bar

Simple button rollover effect help needed - please help!

Similar Messages

Maybe you are looking for