Simulate RS 422 serial messages

Hi,
I want to simulate/Generate RS 422 messages with the help of Labview and send to my PLC, right now I have NI 9188 Chassis and some I/O modules. Please suggest what should be the approach and software, hardware needed for this purpose.
Thanks
Prashant

Use a COM port with a converter would be the easiest.
Reese, (former CLAD, future CLD)
Some people call me the Space Cowboy!
Some call me the gangster of love.
Some people call me MoReese!
...I'm right here baby, right here, right here, right here at home

Similar Messages

C-Series Module NI 9871, 4-Port, RS485/422 Serial Interface

I have a question regarding the C-Series Module NI 9871, 4-Port, RS485/422 Serial Interface.
I need to find out how it recovers the data from the link. I need to compare it with 8b/10b encoding.
Does anyone know what UARTs are used or how the data is recovered.
Thanks
John Lee

Hi John,
I have had a look into this and I cannot find any specific information on the Transciever or UART. However I have come across an example using the 9871 with processing on a cRIO FPGA.
To find this example open up Labview » go to Help » Find Examples » Search for 9871 and open up NI-987x Serial Loopback.lvproj.
Hopefully this should give you a good start. Once your serial data is passed onto the FPGA you can then decode the 8b/10b within the FPGA code.
Best Regards,
Ben B.
Applications Engineer
National Instruments UK & Ireland
"I've looked into the reset button, the science is impossible!"

RS 422 serial adpator for FCP

can anyone recommend a good RS 422 serial port adapter for my Mac Pro. I have a intensity card, but I need deck control for my Sony UVW 70 Beta Deck. Any suggestions? I alread have the USB to serial port adaptor cable. I just need the RS 422 adpator at this point.

Try asking the people who actually carry the hardware you need; try Abel-Cine, VTP or VMI in the LA area or Omega Broadcast in Austin and a host of other pro-video distributors/dealers who will not only know what you need but will most likely have it in stock. If you need a list of other pro-video equipment suppliers go to DVinfo.net and look up their sponsor list.

Invalid serial # message/Unable to reinstall

I don't know what caused this, but I attempted to open Audition last night and it didn't happen. I got the odd prompt that the serial number was invalid. (I bought this program many months ago, and it is installed on this and another computer.)
I then attempted to uninstall it so I could then reinstall it, but have been prevented from doing so for some reason. There are two options in the Install Wizard on the disc, Repair and Remove.
When I attempt to repair, it completes the installation successfully. Then I attempt to open the program and get "The serial number is invalid. Please reinstall Adobe Audition." again. I can't!
When I attempt to remove it, the process gets stopped at the same point each time, prompting the following the message:
"The wizard was interrupted before Adobe Audition 3.0 could be completely installed.
Your system has not been modified. To complete installation at another time, please run setup again."
In the Control Panel's "Uninstall or change a program" section, there are two entries for Adobe Audition 3.0
One has the options to Uninstall, Change or Repair and has no listing under the "Publisher" column.
When attempting to perform any one of these options, NOTHING happens.
The other, with "Adobe Systems Incorporated" has only a "Uninstall/Change" option.
Choosing this sole option results exactly the same way as when attempting to perform the uninstall from the disc.
Ugh. What's happening? How can I resolve this, and what might have caused it?

> I bought it from this site, actually.
Just goes to show you can't trust Adobe an inch. :)
Activation limit - there is a set number of times you can deactivate and reactivate. In case the magic number is confidential I won't mention it, but in typical use - reinstalling after buying a new PC every now and then, or after reinstalling the OS - you'd be unlikely to hit it. However, in a few cases people's individual needs have brought their heads up against the ceiling - and only Adobe can help with that as SteveG confirms.

Asynchronous serial message read

Hi, everybody.
I have the message based device. I don't know when the device will send the message, so I didn't know how should I create the VISA read function to read whole string from the device(because it reads only data, which are enabled at serial port buffer).May be it can be done by using VISA bytes at port in while loop, but I don't know exactly how.Can you explain it to me?Or do you have any other solution?Thank you for your help.
Solved!
Go to Solution.

Hi
I reworked the basic serial read and write example, just to give you some programming hint. Also remember that then reading from the serial buffer, you do not need to read all the content. Read the number of bytes you need. The serial buffer is FIFO type. So the oldest content will always be first in the queue to read.
My example is somewhat simple, and I did not test it but should work. Check out queues and notifiers (in example finder) for more advanced programming techniques.
Besides which, my opinion is that Express VIs Carthage must be destroyed deleted
(Sorry no Labview "brag list" so far)
Attachments:
Basic Serial Write and Read async.vi ‏33 KB

Simulate Keyboard using serial pc port as an output. Use the pc as a Keyboard

Hi everyone,
I need to design an application to use a pc as a Keyboard using the serial port as an output to be connected to a ps2 port or serial port keyboard of another pc.
Is it possible? Anyone Knows a solution or an example?
I've seen a lot of examples about capturing keyboard events, but not about this case.
Thanks in advance,
Silvia

One more thing I wanted to add is that since am not using a computer at the receiving end, the output data from the PC serial port has to be in PS2 format. But reading articles on some websites (http://www.computer-engineering.org/ps2keyboard/) it seems like I will need a 8042 keyboard controller to deal with all the handshaking and signal level protocol as the RS232 serial port protocol is quite different from that of the PS2 protocol.
In the setup that I have, at the receiving end of the keyboard data I have a PCB (that has a ST uPSD3354DV microprocessor), that reads the PS2 input and displays it on an onboard LCD screen.
So based on this information, if someone can provide me with some ideas or suggestions, that would be great.
Thank you in advance,
Shoab

XI JMS Sender adapter EOIO with serialized messages

Hello
I have a customer question. They would like to use a JMS sender adapter with quality of service EOIO. There will potentially be multiple messages in a MQ Series queue at the same time, but they want XI to pick up these messages in the correct order. Is this possible? The documentation for JMS sender adapter lists the following:
"Specify the Processing J2EE Cluster Server (Cluster ID).
This specification stops queue-jumping in the JMS queue. The valid cluster ID is located on the J2EE server Administrator under Server."
Does this relate?
Thank you,
Harold

> I have a customer question. They would like to use a
> JMS sender adapter with quality of service EOIO.
> There will potentially be multiple messages in a MQ
> Q Series queue at the same time, but they want XI to
> pick up these messages in the correct order. Is this
> possible?
Yes. Just choose Exactly-onces-in-order for Quality of Service.
> The documentation for JMS sender adapter
> lists the following:
> "Specify the Processing J2EE Cluster Server (Cluster
> ID).
> This specification stops queue-jumping in the JMS
> queue. The valid cluster ID is located on the J2EE
> server Administrator under Server."
When you choose EOIO, the processing can be done by one J2EE server node only. So put the cluster ID of the required server note here.
Regards
Stefan

Multiple byte serial message construction

Using LabVIEW 8.2
Have a computer system I need to send simulated data.
It is expecting a message of 26 bytes.
A synopsis of the contents follows:
Byte
0    Header
1    Header
2    Message Length
3    Device address
4    GPS Seconds of Week Byte0 LSB
5    SOW - Byte1
6    SOW - Byte2
7    SOW - Byte3 MSB
etc.
Given known values for the bytes, what is the simplest method of constructing the string to be sent via RS-232 using the VISA Write VI?

Tried a test with known data and it seems to work regardless of the U8 vs I8 question.
Attachments:
Test Byte Array to String.vi ‏7 KB

Labview 2011 on Win7, OS causing serial loopback message corruption when clicking on top of windows?

I'm wondering if anyone else has seen problems like this.
I've been tearing my hair out over debugging some code. I have a ftont panel, I'm using some LEDs to send messages through the NI RS232 cable I bought, and have connected with a connector in a loopback fashion.
I've been trying to read the incoming messages from loopback...and based on those, changing indicators and controls on the front panel.
I could not figure why values were changing at strange times....like T's were turning to F's (I'm working with the serial data as boolean arrays).
Well, I was simplifying code, and mostly running right...but every once in awhile, it appeared that my front panel indictors, especially the values I'm changing based on the loopback serial messages would *BLINK*.
I happened to be looking at the Probe Watch window...and I saw where my probes were correctly showing on a couple spots (a left and right indicator) TTTTTTTF and TTTTTTTF......these appear at times to change T's to F's and vice versa.
I then started clicking around...and found this is almost always caused, when I click the mouse on the top of the window...the part that you usually click and drag to move a window around the Windows desktop!!!!!!!!!!!!
I can see this happen when I click on ANY window on the Windows OS desktop!!!!!!
It appears that the OS is messing with me..............?
I'm using Labview 2011, 32-bit on Win7....I believe the OS is 64 bit.
Has anyone seen behavior like this before?
Thanks in advance,
cayenne

Matthew Kelton wrote:
When you are probing, are you looking at the actual spot where you are getting your serial data, or are you looking at it after you've done some processing? I would look at the actual raw data and use a serial port capture utility (there are several free ones on the internet) which will confirm your data is coming in correctly.
What is your CPU running at? If it is pegged at 100%, something has to give.
Is your entire VI running in the UI execution system? If you post your test code, it sounds like it would be easy enough for someone to do a loopback test of their own to confirm similar behavior.
Thanks for the reply. No, CPU isn't being hardly used at all...this is a new lenovo laptop.....high end Dell U2711 monitor...
Task Mgr while Front Panel running:
I'm looking after I've done some processing....
I'm new to working with serial port stuff....I don't have a serial port capture device...?
Thing is...when I run this in debug with breakpoints and stepping through...I don't see this happening. But when running at full speed, and especially when I click on any of the open windows on my desktop, along the top margin where you would click and drag a window around...I can see the serial data in the probe jump...and all data going through the serial port and being displayed on the front panel changing values...
On my VI, I'm actually constructing the byte string...sending it through the serial loopback, and receiving it and acting on it. I can see the data going in is the same as is coming out...it just seems to quickly corrupt and then come back again...like maybe it is getting interrupted by the Win7 OS....?
I can't really post the whole code here...proprietary stuff...that's why in the past, I was posting a separate, simpler vi with only the parts I was having problems with....
I think I have full support with NI...I wonder if I could send them the code to look at, with more confidentiality...?
But again, I can make the problems happen, when it and the probe window is open, in real time...by clicking on windows.
Also, this tends to explain problems I saw earlier...when running slow, all was well , when debugging with break points and stepping through. But at full speed, unexplained...things would start resetting without explanation...and without regularity.
C
I"m not sure what you are asking with "Is your entire VI running in the UI execution system?"....I have the one vi running, and only that vi is running.....

Simulate arduino serial monitor

object : Simulate Arduino's serial monitor on Lab view
problem : I'm working on a graduation project of Interfacing load cell and arduino
I'm using an amplifier to the load cell signal, so I've to load the amp code to the arduino
everything is good with the serial monitor and I get the readings I'm seeking.
Can I simulate these reading on Lab view for further analysis ?
Thanks
Solved!
Go to Solution.

You need to scroll the output. Here is the simple one
1. Right click on string indicator
2. Create property node for the same
3. go to Text -> scroll position
4. Wire +infinity.
Kudos are always welcome if you got solution to some extent.
I need my difficulties because they are necessary to enjoy my success.
--Ranjeet

Communication error when sending PI message from Integration Engine to AE

Hi Experts,
we currently installed and configured PI 7.3 system. Even I run post installation PI configuration several times, we are still facing error when Integration engine sends message to messaging system. ( my scenario: I send test message to IE directly, avoiding AE )...
It might look easy: but even adding PIISUSER full authorization and system restart, the result is the same. I don't know if it could have connection but I also get HTTP 200 instead of HTTP 500 when testing INTEGRATION_DIRECTORY_HMI destination.
Thanks for any help.
<Trace level="1" type="B" name="CL_XMS_PLSRV_IE_ADAPTER-ENTER_PLSRV">
<Trace level="1" type="B" name="CL_XMS_PLSRV_CALL_XMB-CALL_XMS_HTTP" />
- 
<Trace level="1" type="T">error reading SAP_XIAdapterFramework from SLD</Trace>
<Trace level="1" type="T">error reading SAP_XIAdapterFramework from SLD</Trace>
<Trace level="1" type="T">Get logon data for adapter engine (SAI_AE_DETAILS_GET):</Trace>
<Trace level="1" type="T">URL = http://xxx:xxxx/MessagingSystem/receive/AFW/XI</Trace>
<Trace level="1" type="T">User = PIISUSER</Trace>
<Trace level="1" type="T">Cached =</Trace>
<Trace level="1" type="T">Security: Basic authentication</Trace>
<Trace level="1" type="T">Serializing message object...</Trace>
<Trace level="1" type="T">Tuning - AFW_MAXREQUESTCONTENTLENGTH 2000000000</Trace>
<Trace level="1" type="T">HTTP Multipart document length: 2948</Trace>
<Trace level="1" type="T">Timeout: 0</Trace>
<Trace level="1" type="T">HTTP-client: request sent</Trace>
<Trace level="1" type="T">HTTP-client: response received</Trace>
<Trace level="1" type="T">HTTP-client: status code = 401</Trace>
<Trace level="1" type="System_Error">Authorization error while sending by HTTP (error code: 401 , error text: Unauthorized)</Trace>
</Trace>

Hi,
So this password change in Exchange Profile + su01 transaction + system restart didn't help.
I increase trace level, and this is even more detailed log in pipeline step Call Adapter.
We also find out that when message arrive to IE we have in java log three entries:
LOGIN.FAILED
User: N/A
IP Address: xxx
Authentication Stack: sap.com/com.sap.aii.af.ms.app*MessagingSystem
Login Module Flag Initialize Login Commit Abort Details
1. com.sap.security.core.server.jaas.EvaluateAssertionTicketLoginModule SUFFICIENT ok exception true Received no SAP Authentication Assertion Ticket.
2. com.sap.security.core.server.jaas.EvaluateTicketLoginModule SUFFICIENT ok false true
3. com.sap.engine.services.security.server.jaas.BasicPasswordLoginModule REQUISITE ok exception true Authentication did not succeed.
This log is logged under J2EE_GUEST User.
LOGIN.OK
User: SLD_CL_PIQ
IP Address: xxx
Authentication Stack: sap.com/com.sap.lcr*sld
LOGIN.OK
User: SLD_CL_PIQ
IP Address: xxx
Authentication Stack: sap.com/com.sap.lcr*sld
Last two logs are logged by SLD_CL_PIQ user.
Thanks for any help!

- <Trace level="1" type="B" name="CL_XMS_PLSRV_IE_ADAPTER-ENTER_PLSRV">
<Trace level="3" type="T">Channel for adapter engine: File</Trace>
<Trace level="1" type="B" name="CL_XMS_PLSRV_CALL_XMB-CALL_XMS_HTTP" />
- 
<Trace level="2" type="T">no values in cache (no lock found) - start reading from SLD</Trace>
<Trace level="1" type="T">error reading SAP_XIAdapterFramework from SLD</Trace>
<Trace level="2" type="T">Adapter Framework(s) found</Trace>
<Trace level="2" type="T">Service Port(s) found - take first one</Trace>
<Trace level="2" type="T">URL found</Trace>
<Trace level="2" type="T">no values in cache (lock found) - start reading from SLD</Trace>
<Trace level="1" type="T">error reading SAP_XIAdapterFramework from SLD</Trace>
<Trace level="2" type="T">Adapter Framework(s) found</Trace>
<Trace level="2" type="T">Service Port(s) found - take first one</Trace>
<Trace level="2" type="T">URL found</Trace>
<Trace level="1" type="T">Get logon data for adapter engine (SAI_AE_DETAILS_GET):</Trace>
<Trace level="1" type="T">URL = http://xxx/MessagingSystem/receive/AFW/XI</Trace>
<Trace level="1" type="T">User = PIISUSERA</Trace>
<Trace level="1" type="T">Cached =</Trace>
<Trace level="3" type="T">Creating HTTP-client</Trace>
<Trace level="3" type="T">HTTP-client: creation finished</Trace>
<Trace level="1" type="T">Security: Basic authentication</Trace>
<Trace level="1" type="T">Serializing message object...</Trace>
<Trace level="1" type="T">Tuning - AFW_MAXREQUESTCONTENTLENGTH 2000000000</Trace>
<Trace level="1" type="T">HTTP Multipart document length: 2941</Trace>
<Trace level="3" type="T">HTTP-client: sending http-request...</Trace>
<Trace level="1" type="T">Timeout: 0</Trace>
<Trace level="1" type="T">HTTP-client: request sent</Trace>
<Trace level="3" type="T">HTTP-client: request sent</Trace>
<Trace level="3" type="T">HTTP-client: Receiving http-response...</Trace>
<Trace level="1" type="T">HTTP-client: response received</Trace>
<Trace level="3" type="T">HTTP-client: checking status code...</Trace>
<Trace level="1" type="T">HTTP-client: status code = 401</Trace>
<Trace level="3" type="System_Error">Authorization error while sending by HTTP (error code: 401 , error text: Unauthorized)</Trace>
</Trace>
</Trace>

Message serialization in XI with Web Service Adapters

Hi All,
I'm trying to configure the receiver SOAP communication channel to send serial messages to a Web-Service we created here, but i didn't find a way to do that.
I tried to configure the QoS of the Receiver Communication Channel but this option was disabled in the Integration Directory.
Is there any way of doing that without using BPM? If there is, please tell me how i can do it.
Thanks in advance,
Leonardo

Hi,
For Idoc Queue processing,
Check this help-
http://help.sap.com/saphelp_nw04/helpdata/en/bd/277264c3ddd44ea429af5e7d2c6e69/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/00/9ffe3e432fd861e10000000a114084/frameset.htm
Regards,
Moorthy

Posting XML via HTTP post returns "Envelope missing in SOAP message header"

Hi,
I am trying to post a simple XML message directly to the integration server using an html document, where the form that contains the XML message is a simple
<FORM action="http://servername:8000/sap/xi/engine?type=entry" method="post">
So, I add my xml message like this:
<?xml version="1.0" encoding="UTF-8">
<ns:PlantMaintenanceMessageType xmlns:ns="http://sap.com/demo/plantmaintenance">
 <EquipmentID>SLIEQUIP5</EquipmentID>
 <FunctionalLocation>KB</FunctionalLocation>
 <Date/>
 <Time/>
</ns:PlantMaintenanceMessageType>
but I get a message back from the Integration Server as:
<SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>XIProtocol</SAP:Category>
<SAP:Code area="PARSER">ITEM_MISSING</SAP:Code>
<SAP:P1>Envelope</SAP:P1>
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>XML tag Envelope missing in SOAP message header (SAP XI Extension)</SAP:Stack>
</SAP:Error>
Seems like I am missing the Envelope so my Integration Server can understand my post. What does the Envelope look like or should conatain so that the Integration Server accepts my XML file ?
Thanks !

This is the trace
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Trace xmlns:SAP="http://sap.com/xi/XI/Message/30">
<Trace level="1" type="T">Party normalization: sender</Trace>
<Trace level="1" type="T">Sender scheme external =</Trace>
<Trace level="1" type="T">Sender agency external =</Trace>
<Trace level="1" type="T">Sender party external =</Trace>
<Trace level="1" type="T">Sender party normalized =</Trace>
<Trace level="1" type="B" name="CL_XMS_HTTP_HANDLER-HANDLE_REQUEST" />
- 
<Trace level="1" type="T">XMB was called with URL /sap/xi/engine?type=entry</Trace>
<Trace level="2" type="T">Request Line = POST /sap/xi/engine?type=entry HTTP/1.1</Trace>
<Trace level="2" type="T">Host = sapqxh:8020</Trace>
<Trace level="2" type="T">Server protocol = HTTP/1.1</Trace>
<Trace level="2" type="T">Remote address = 10.228.137.106</Trace>
<Trace level="1" type="T">COMMIT is done by XMB !</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-ENTER_XMS" />
- 
<Trace level="1" type="B" name="CL_XMS_MAIN-SET_START_PIPELINE" />
- 
<Trace level="3" type="T">XMB was called with external pipeline PID = ENTRY</Trace>
<Trace level="3" type="T">Getting type of XMB...</Trace>
<Trace level="1" type="B" name="SXMBCONF-SXMB_GET_XMB_USE" />
<Trace level="2" type="T">XMB kind = CENTRAL</Trace>
<Trace level="3" type="T">Start pipeline found</Trace>
<Trace level="2" type="T">Switch to external start pipeline PID = CENTRAL</Trace>
- <Trace level="1" type="B" name="CL_XMS_TROUBLESHOOT-ENTER_PLSRV">
<Trace level="3" type="T">No triggers found. OK.</Trace>
</Trace>
<Trace level="1" type="T">****************************************************</Trace>
<Trace level="1" type="T">* *</Trace>
<Trace level="1" type="T">* *</Trace>
<Trace level="1" type="T">XMB entry processing</Trace>
<Trace level="3" type="T">system-ID = QXH</Trace>
<Trace level="3" type="T">client = 220</Trace>
<Trace level="3" type="T">language = E</Trace>
<Trace level="3" type="T">user = PISUPER</Trace>
<Trace level="1" type="Timestamp">2008-07-18T14:19:04Z CET</Trace>
<Trace level="1" type="T">* *</Trace>
<Trace level="1" type="T">* *</Trace>
<Trace level="1" type="T">****************************************************</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_UC_EXECUTE" />
- 
<Trace level="1" type="T">Message-GUID = 4880474945AE67E2E10000000AE4896A</Trace>
<Trace level="1" type="T">PLNAME = CENTRAL</Trace>
<Trace level="1" type="T">QOS = EO</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PIPELINE_ASYNC" />
- 
<Trace level="3" type="T">QOS = EO</Trace>
<Trace level="3" type="T">Message-GUID = 4880474945AE67E2E10000000AE4896A</Trace>
<Trace level="1" type="T">Get definition of external pipeline = CENTRAL</Trace>
- <Trace level="1" type="B" name="CL_XMS_MAIN-LOOKUP_INTERNAL_PL_ID">
<Trace level="3" type="T">External PLID = CENTRAL</Trace>
<Trace level="3" type="T">Internal PLID = SAP_CENTRAL</Trace>
</Trace>
<Trace level="1" type="T">Get definition of internal pipeline = SAP_CENTRAL</Trace>
<Trace level="3" type="T">Generate prefixed queue name</Trace>
<Trace level="1" type="T">Queue name : XBTL0000</Trace>
<Trace level="1" type="T">Generated prefixed queue name = XBTL0000</Trace>
<Trace level="1" type="T">Schedule message in qRFC environment</Trace>
<Trace level="3" type="T">Setup qRFC Scheduler</Trace>
<Trace level="1" type="T">Setup qRFC Scheduler OK!</Trace>
<Trace level="3" type="T">Call qRFC .... MsgGuid = 4880474945AE67E2E10000000AE4896A</Trace>
<Trace level="3" type="T">Call qRFC .... Version = 000</Trace>
<Trace level="3" type="T">Call qRFC .... Pipeline = CENTRAL</Trace>
<Trace level="3" type="T">OK.</Trace>
<Trace level="1" type="T">----
</Trace>
<Trace level="1" type="T">Going to persist message</Trace>
<Trace level="1" type="T">NOTE: The following trace entries are always lacking</Trace>
<Trace level="1" type="T">- Exit WRITE_MESSAGE_TO_PERSIST</Trace>
<Trace level="1" type="T">- Exit CALL_PIPELINE_ASYNC</Trace>
<Trace level="1" type="T">Async barrier reached. Bye-bye !</Trace>
<Trace level="1" type="T">----
</Trace>
<Trace level="3" type="T">Version number = 000</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_TO_PERSIST" />
- 
<Trace level="3" type="T">Persisting message Status = 001</Trace>
<Trace level="3" type="T">Message version 000</Trace>
<Trace level="3" type="T">Pipeline CENTRAL</Trace>
<Trace level="1" type="T">--start sender interface action determination</Trace>
<Trace level="1" type="T">select interface MIOA_US139_EmployeeData*</Trace>
<Trace level="1" type="T">select interface namespace urn:abbott-com:US139</Trace>
<Trace level="1" type="T">found interface MIOA_US139_EmployeeData</Trace>
<Trace level="1" type="T">found action ARCH</Trace>
<Trace level="1" type="T">set interface action to ARCH</Trace>
- <Trace level="1" type="B" name="CL_XMS_MAIN-PERSIST_READ_MESSAGE">
<Trace level="3" type="T">Trace object available again now. OK.</Trace>
<Trace level="3" type="T">Message was read from persist layer. OK.</Trace>
<Trace level="3" type="T">Message properties in XMB object were setup. OK.</Trace>
<Trace level="3" type="ToDo">Make sure we catch exceptions in persist read</Trace>
<Trace level="3" type="ToDo">Tracing obj. not avail. before return of CL_XMS_MAIN-PERSIST_READ_MESSAGE</Trace>
</Trace>
<Trace level="1" type="T">Note: the following trace entry is written delayed (after read from persist)</Trace>
<Trace level="1" type="B" name="SXMS_ASYNC_EXEC" />
- 
<Trace level="3" type="T">message version successfully read from persist version= 000</Trace>
<Trace level="2" type="T">Increment log sequence to 001</Trace>
<Trace level="1" type="T">----
</Trace>
<Trace level="1" type="T">Starting async processing with pipeline CENTRAL</Trace>
<Trace level="3" type="T">system-ID = QXH</Trace>
<Trace level="3" type="T">client = 220</Trace>
<Trace level="3" type="T">language = E</Trace>
<Trace level="3" type="T">user = PISUPER</Trace>
<Trace level="1" type="Timestamp">2008-07-18T14:19:08Z CET</Trace>
<Trace level="1" type="T">----
</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PIPELINE_SYNC" />
- 
<Trace level="1" type="T">Get definition of external pipeline CENTRAL</Trace>
- <Trace level="1" type="B" name="CL_XMS_MAIN-LOOKUP_INTERNAL_PL_ID">
<Trace level="3" type="T">External PLID = CENTRAL</Trace>
<Trace level="3" type="T">Internal PLID = SAP_CENTRAL</Trace>
</Trace>
<Trace level="1" type="T">Corresponding internal pipeline SAP_CENTRAL</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">Pipeline attributes</Trace>
<Trace level="3" type="T">PID = SAP_CENTRAL</Trace>
<Trace level="3" type="T">ENABLE = 1</Trace>
<Trace level="3" type="T">TRACELEVEL = 0</Trace>
<Trace level="3" type="T">EXEMODE = A</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T" />
<Trace level="3" type="T">Pipeline elements</Trace>
<Trace level="3" type="T">ELEMPOS = 0001</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_RECEIVER_DETERMINATION</Trace>
<Trace level="3" type="T">PLSRVTYPE =</Trace>
<Trace level="3" type="T">FL_DUMMY = 0</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">ELEMPOS = 0002</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_INTERFACE_DETERMINATION</Trace>
<Trace level="3" type="T">PLSRVTYPE =</Trace>
<Trace level="3" type="T">FL_DUMMY =</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">ELEMPOS = 0003</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_RECEIVER_MESSAGE_SPLIT</Trace>
<Trace level="3" type="T">PLSRVTYPE =</Trace>
<Trace level="3" type="T">FL_DUMMY =</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">ELEMPOS = 0004</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_MAPPING_REQUEST</Trace>
<Trace level="3" type="T">PLSRVTYPE =</Trace>
<Trace level="3" type="T">FL_DUMMY =</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">ELEMPOS = 0007</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_OUTBOUND_BINDING</Trace>
<Trace level="3" type="T">PLSRVTYPE =</Trace>
<Trace level="3" type="T">FL_DUMMY =</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">ELEMPOS = 0008</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_CALL_ADAPTER</Trace>
<Trace level="3" type="T">PLSRVTYPE = =SWITCH=</Trace>
<Trace level="3" type="T">FL_DUMMY =</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">ELEMPOS = 0009</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_MAPPING_RESPONSE</Trace>
<Trace level="3" type="T">PLSRVTYPE =</Trace>
<Trace level="3" type="T">FL_DUMMY =</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T" />
<Trace level="1" type="Timestamp">2008-07-18T14:19:08Z CET Begin of pipeline processing PLSRVID = CENTRAL</Trace>
- <Trace level="1" type="B" name="PLSRV_RECEIVER_DETERMINATION">
<Trace level="1" type="Timestamp">2008-07-18T14:19:08Z CET Start of pipeline service processing PLSRVID= PLSRV_RECEIVER_DETERMINATION</Trace>
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV">
<Trace level="3" type="T">Calling pipeline service: PLSRV_RECEIVER_DETERMINATION</Trace>
<Trace level="3" type="T">Reading Pipeline-Service specification...</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">Pipeline service specification (table SXMSPLSRV)</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_RECEIVER_DETERMINATION</Trace>
<Trace level="3" type="T">PLSRVTYPE =</Trace>
<Trace level="3" type="T">ADRESSMOD = LOCAL</Trace>
<Trace level="3" type="T">P_CLASS = CL_RD_PLSRV</Trace>
<Trace level="3" type="T">P_IFNAME = IF_XMS_PLSRV</Trace>
<Trace level="3" type="T">P_METHOD = ENTER_PLSRV</Trace>
<Trace level="3" type="T">FL_LOG =</Trace>
<Trace level="3" type="T">FL_DUMMY = 0</Trace>
<Trace level="3" type="T" />
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV_LOCAL">
- <Trace level="1" type="B" name="CL_RD_PLSRV-ENTER_PLSRV">
<Trace level="1" type="T">R E C E I V E R - D E T E R M I N A T I O N</Trace>
<Trace level="1" type="T">Cache Content is up to date</Trace>
<Trace level="2" type="T">Start without given receiver</Trace>
<Trace level="2" type="T">Classic Receiver Determination via Rules.</Trace>
<Trace level="2" type="T">Check conditions for rule line no. 1</Trace>
<Trace level="2" type="T">...valid Receiver w/o Condition: - BS_AIMS</Trace>
<Trace level="2" type="T">No Receiver found behaviour: 0</Trace>
<Trace level="2" type="T">Number of Receivers:1</Trace>
</Trace>
</Trace>
</Trace>
<Trace level="1" type="Timestamp">2008-07-18T14:19:08Z CET End of pipeline service processing PLSRVID= PLSRV_RECEIVER_DETERMINATION</Trace>
</Trace>
- <Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_LOG_TO_PERSIST">
<Trace level="3" type="T">Persisting message after plsrv call</Trace>
<Trace level="3" type="T">Message-Version = 001</Trace>
<Trace level="3" type="T">Message version 001</Trace>
<Trace level="3" type="T">Pipeline CENTRAL</Trace>
</Trace>
- <Trace level="1" type="B" name="PLSRV_INTERFACE_DETERMINATION">
<Trace level="1" type="Timestamp">2008-07-18T14:19:11Z CET Start of pipeline service processing PLSRVID= PLSRV_INTERFACE_DETERMINATION</Trace>
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV">
<Trace level="3" type="T">Calling pipeline service: PLSRV_INTERFACE_DETERMINATION</Trace>
<Trace level="3" type="T">Reading Pipeline-Service specification...</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">Pipeline service specification (table SXMSPLSRV)</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_INTERFACE_DETERMINATION</Trace>
<Trace level="3" type="T">PLSRVTYPE =</Trace>
<Trace level="3" type="T">ADRESSMOD = LOCAL</Trace>
<Trace level="3" type="T">P_CLASS = CL_ID_PLSRV</Trace>
<Trace level="3" type="T">P_IFNAME = IF_XMS_PLSRV</Trace>
<Trace level="3" type="T">P_METHOD = ENTER_PLSRV</Trace>
<Trace level="3" type="T">FL_LOG =</Trace>
<Trace level="3" type="T">FL_DUMMY = 0</Trace>
<Trace level="3" type="T" />
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV_LOCAL">
- <Trace level="1" type="B" name="CL_ID_PLSRV-ENTER_PLSRV">
<Trace level="1" type="T">I N T E R F A C E - D E T E R M I N A T I O N</Trace>
<Trace level="1" type="T">Cache Content is up to date</Trace>
<Trace level="2" type="T">Check conditions for (Inb: Party Srvc If) BS_AIMS MIIA_US139_EmployeeData</Trace>
<Trace level="2" type="T">...valid InbIf without Condition: MIIA_US139_EmployeeData</Trace>
<Trace level="2" type="T">Number of receiving Interfaces:1</Trace>
</Trace>
</Trace>
</Trace>
<Trace level="1" type="Timestamp">2008-07-18T14:19:11Z CET End of pipeline service processing PLSRVID= PLSRV_INTERFACE_DETERMINATION</Trace>
</Trace>
- <Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_LOG_TO_PERSIST">
<Trace level="3" type="T">Persisting message after plsrv call</Trace>
<Trace level="3" type="T">Message-Version = 002</Trace>
<Trace level="3" type="T">Message version 002</Trace>
<Trace level="3" type="T">Pipeline CENTRAL</Trace>
</Trace>
<Trace level="1" type="B" name="PLSRV_RECEIVER_MESSAGE_SPLIT" />
- 
<Trace level="1" type="Timestamp">2008-07-18T14:19:14Z CET Start of pipeline service processing PLSRVID= PLSRV_RECEIVER_MESSAGE_SPLIT</Trace>
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV">
<Trace level="3" type="T">Calling pipeline service: PLSRV_RECEIVER_MESSAGE_SPLIT</Trace>
<Trace level="3" type="T">Reading Pipeline-Service specification...</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">Pipeline service specification (table SXMSPLSRV)</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_RECEIVER_MESSAGE_SPLIT</Trace>
<Trace level="3" type="T">PLSRVTYPE =</Trace>
<Trace level="3" type="T">ADRESSMOD = LOCAL</Trace>
<Trace level="3" type="T">P_CLASS = CL_XMS_PLSRV_RECEIVER_SPLIT</Trace>
<Trace level="3" type="T">P_IFNAME = IF_XMS_PLSRV</Trace>
<Trace level="3" type="T">P_METHOD = ENTER_PLSRV</Trace>
<Trace level="3" type="T">FL_LOG =</Trace>
<Trace level="3" type="T">FL_DUMMY = 0</Trace>
<Trace level="3" type="T" />
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV_LOCAL">
<Trace level="1" type="B" name="CL_XMS_PLSRV_RECEIVER_SPLIT-ENTER_PLSRV" />
- 
<Trace level="3" type="T">Case handling for different plsrv_ids PLSRV_RECEIVER_MESSAGE_SPLIT</Trace>
<Trace level="2" type="T">got property produced by receiver determination</Trace>
<Trace level="1" type="T">number of receivers: 1</Trace>
<Trace level="1" type="T">Single-receiver split case</Trace>
<Trace level="1" type="T">Post-split internal queue name = XBTM0000</Trace>
<Trace level="1" type="T">----
</Trace>
<Trace level="1" type="T">Persisting single message for post-split handling</Trace>
<Trace level="1" type="T" />
<Trace level="1" type="T">Going to persist message + call qRFC now...</Trace>
<Trace level="1" type="T">NOTE: The following trace entries are always lacking</Trace>
<Trace level="1" type="T">- Exit WRITE_MESSAGE_TO_PERSIST</Trace>
<Trace level="1" type="T">Async barrier reached. Bye-bye !</Trace>
<Trace level="1" type="T">----
</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_TO_PERSIST" />
- 
<Trace level="3" type="T">Persisting message Status = 012</Trace>
<Trace level="3" type="T">Message version 003</Trace>
<Trace level="3" type="T">Pipeline CENTRAL</Trace>
- <Trace level="1" type="B" name="CL_XMS_MAIN-PERSIST_READ_MESSAGE">
<Trace level="3" type="T">Trace object available again now. OK.</Trace>
<Trace level="3" type="T">Message was read from persist layer. OK.</Trace>
<Trace level="3" type="T">Message properties in XMB object were setup. OK.</Trace>
<Trace level="3" type="ToDo">Make sure we catch exceptions in persist read</Trace>
<Trace level="3" type="ToDo">Tracing obj. not avail. before return of CL_XMS_MAIN-PERSIST_READ_MESSAGE</Trace>
</Trace>
<Trace level="1" type="T">Note: the following trace entry is written delayed (after read from persist)</Trace>
<Trace level="1" type="B" name="SXMS_ASYNC_EXEC" />
- 
<Trace level="3" type="T">message version successfully read from persist version= 004</Trace>
<Trace level="2" type="T">Increment log sequence to 005</Trace>
<Trace level="1" type="T">----
</Trace>
<Trace level="1" type="T">Starting async processing with pipeline CENTRAL</Trace>
<Trace level="3" type="T">system-ID = QXH</Trace>
<Trace level="3" type="T">client = 220</Trace>
<Trace level="3" type="T">language = E</Trace>
<Trace level="3" type="T">user = PISUPER</Trace>
<Trace level="1" type="Timestamp">2008-07-18T14:19:20Z CET</Trace>
<Trace level="1" type="T">----
</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PIPELINE_SYNC" />
- 
<Trace level="1" type="T">Get definition of external pipeline CENTRAL</Trace>
- <Trace level="1" type="B" name="CL_XMS_MAIN-LOOKUP_INTERNAL_PL_ID">
<Trace level="3" type="T">External PLID = CENTRAL</Trace>
<Trace level="3" type="T">Internal PLID = SAP_CENTRAL</Trace>
</Trace>
<Trace level="1" type="T">Corresponding internal pipeline SAP_CENTRAL</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">Pipeline attributes</Trace>
<Trace level="3" type="T">PID = SAP_CENTRAL</Trace>
<Trace level="3" type="T">ENABLE = 1</Trace>
<Trace level="3" type="T">TRACELEVEL = 0</Trace>
<Trace level="3" type="T">EXEMODE = A</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T" />
<Trace level="3" type="T">Pipeline elements</Trace>
<Trace level="3" type="T">ELEMPOS = 0001</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_RECEIVER_DETERMINATION</Trace>
<Trace level="3" type="T">PLSRVTYPE =</Trace>
<Trace level="3" type="T">FL_DUMMY = 0</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">ELEMPOS = 0002</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_INTERFACE_DETERMINATION</Trace>
<Trace level="3" type="T">PLSRVTYPE =</Trace>
<Trace level="3" type="T">FL_DUMMY =</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">ELEMPOS = 0003</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_RECEIVER_MESSAGE_SPLIT</Trace>
<Trace level="3" type="T">PLSRVTYPE =</Trace>
<Trace level="3" type="T">FL_DUMMY =</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">ELEMPOS = 0004</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_MAPPING_REQUEST</Trace>
<Trace level="3" type="T">PLSRVTYPE =</Trace>
<Trace level="3" type="T">FL_DUMMY =</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">ELEMPOS = 0007</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_OUTBOUND_BINDING</Trace>
<Trace level="3" type="T">PLSRVTYPE =</Trace>
<Trace level="3" type="T">FL_DUMMY =</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">ELEMPOS = 0008</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_CALL_ADAPTER</Trace>
<Trace level="3" type="T">PLSRVTYPE = =SWITCH=</Trace>
<Trace level="3" type="T">FL_DUMMY =</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">ELEMPOS = 0009</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_MAPPING_RESPONSE</Trace>
<Trace level="3" type="T">PLSRVTYPE =</Trace>
<Trace level="3" type="T">FL_DUMMY =</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T" />
<Trace level="1" type="Timestamp">2008-07-18T14:19:20Z CET Begin of pipeline processing PLSRVID = CENTRAL</Trace>
<Trace level="1" type="T">Start with pipeline element PLEL= 5EC3C53B4BB7B62DE10000000A1148F5</Trace>
- <Trace level="1" type="B" name="PLSRV_MAPPING_REQUEST">
<Trace level="1" type="Timestamp">2008-07-18T14:19:20Z CET Start of pipeline service processing PLSRVID= PLSRV_MAPPING_REQUEST</Trace>
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV">
<Trace level="3" type="T">Calling pipeline service: PLSRV_MAPPING_REQUEST</Trace>
<Trace level="3" type="T">Reading Pipeline-Service specification...</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">Pipeline service specification (table SXMSPLSRV)</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_MAPPING_REQUEST</Trace>
<Trace level="3" type="T">PLSRVTYPE =</Trace>
<Trace level="3" type="T">ADRESSMOD = LOCAL</Trace>
<Trace level="3" type="T">P_CLASS = CL_MAPPING_XMS_PLSRV3</Trace>
<Trace level="3" type="T">P_IFNAME = IF_XMS_PLSRV</Trace>
<Trace level="3" type="T">P_METHOD = ENTER_PLSRV</Trace>
<Trace level="3" type="T">FL_LOG =</Trace>
<Trace level="3" type="T">FL_DUMMY = 0</Trace>
<Trace level="3" type="T" />
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV_LOCAL">
- <Trace level="1" type="B" name="CL_MAPPING_XMS_PLSRV3-ENTER_PLSRV">
<Trace level="2" type="T">......attachment XI_Context not found</Trace>
<Trace level="3" type="T">Mapping already defined in interface determination</Trace>
<Trace level="3" type="T">Object ID of Interface Mapping 3CCA7AE76D3F33F19F8D7A8DAD494E65</Trace>
<Trace level="3" type="T">Version ID of Interface Mapping C387A5F00F8B11DCAB84C751AAE12E82</Trace>
<Trace level="1" type="T">Interface Mapping urn:abbott-com:US139 IM_US139_EmployeeData</Trace>
<Trace level="3" type="T">Mapping Steps 1 JAVA com/sap/xi/tf/_MM_US139_EmployeeData_</Trace>
<Trace level="3" type="T">Dynamic Configuration Is Empty</Trace>
<Trace level="2" type="T">Mode 0</Trace>
<Trace level="3" type="T">Creating Java mapping com/sap/xi/tf/_MM_US139_EmployeeData_.</Trace>
<Trace level="3" type="T">Load c387a5f0-0f8b-11dc-ab84-c751aae12e82, urn:abbott-com:US139, -1, com/sap/xi/tf/_MM_US139_EmployeeData_.class.</Trace>
<Trace level="3" type="T">Search com/sap/xi/tf/_MM_US139_EmployeeData_.class (urn:abbott-com:US139, -1) in swcv c387a5f0-0f8b-11dc-ab84-c751aae12e82.</Trace>
<Trace level="3" type="T">Loaded class com.sap.xi.tf._MM_US139_EmployeeData_</Trace>
<Trace level="2" type="T">Call method execute of the application Java mapping com.sap.xi.tf._MM_US139_EmployeeData_</Trace>
<Trace level="2" type="T">Java mapping com/sap/xi/tf/_MM_US139_EmployeeData_ completed. (executeStep() of com.sap.xi.tf._MM_US139_EmployeeData_</Trace>
<Trace level="3" type="T">Dynamic Configuration Is Empty</Trace>
</Trace>
</Trace>
</Trace>
<Trace level="1" type="Timestamp">2008-07-18T14:22:07Z CET End of pipeline service processing PLSRVID= PLSRV_MAPPING_REQUEST</Trace>
</Trace>
- <Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_LOG_TO_PERSIST">
<Trace level="3" type="T">Persisting message after plsrv call</Trace>
<Trace level="3" type="T">Message-Version = 005</Trace>
<Trace level="3" type="T">Message version 005</Trace>
<Trace level="3" type="T">Pipeline CENTRAL</Trace>
</Trace>
- <Trace level="1" type="B" name="PLSRV_OUTBOUND_BINDING">
<Trace level="1" type="Timestamp">2008-07-18T14:22:12Z CET Start of pipeline service processing PLSRVID= PLSRV_OUTBOUND_BINDING</Trace>
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV">
<Trace level="3" type="T">Calling pipeline service: PLSRV_OUTBOUND_BINDING</Trace>
<Trace level="3" type="T">Reading Pipeline-Service specification...</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">Pipeline service specification (table SXMSPLSRV)</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_OUTBOUND_BINDING</Trace>
<Trace level="3" type="T">PLSRVTYPE =</Trace>
<Trace level="3" type="T">ADRESSMOD = LOCAL</Trace>
<Trace level="3" type="T">P_CLASS = CL_XMS_PLSRV_OUTBINDING</Trace>
<Trace level="3" type="T">P_IFNAME = IF_XMS_PLSRV</Trace>
<Trace level="3" type="T">P_METHOD = ENTER_PLSRV</Trace>
<Trace level="3" type="T">FL_LOG =</Trace>
<Trace level="3" type="T">FL_DUMMY = 0</Trace>
<Trace level="3" type="T" />
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV_LOCAL" />
- 
- <Trace level="1" type="B" name="CL_XMS_PLSRV_OUTBINDING-ENTER_PLSRV">
<Trace level="2" type="T">O U T B O U N D - B I N D I N G</Trace>
<Trace level="2" type="T">Cache Content is up to date</Trace>
<Trace level="2" type="T">determine OUTBOUND BINDING for:</Trace>
<Trace level="2" type="T">-QEHCLNT230</Trace>
<Trace level="2" type="T">-BS_AIMS</Trace>
<Trace level="2" type="T">urn:abbott-com:US139.MIIA_US139_EmployeeData</Trace>
<Trace level="2" type="T">Channel found: - BS_AIMS - CC_BS_AIMS_File_Out_09</Trace>
<Trace level="2" type="T">no header mapping defined</Trace>
</Trace>
</Trace>
</Trace>
<Trace level="1" type="Timestamp">2008-07-18T14:22:12Z CET End of pipeline service processing PLSRVID= PLSRV_OUTBOUND_BINDING</Trace>
</Trace>
- <Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_LOG_TO_PERSIST">
<Trace level="3" type="T">Persisting message after plsrv call</Trace>
<Trace level="3" type="T">Message-Version = 006</Trace>
<Trace level="3" type="T">Message version 006</Trace>
<Trace level="3" type="T">Pipeline CENTRAL</Trace>
</Trace>
<Trace level="1" type="B" name="PLSRV_CALL_ADAPTER" />
- 
<Trace level="1" type="Timestamp">2008-07-18T14:22:18Z CET Start of pipeline service processing PLSRVID= PLSRV_CALL_ADAPTER</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV" />
- 
<Trace level="3" type="T">Calling pipeline service: PLSRV_CALL_ADAPTER</Trace>
<Trace level="3" type="T">Reading Pipeline-Service specification...</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">Pipeline service specification (table SXMSPLSRV)</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_CALL_ADAPTER</Trace>
<Trace level="3" type="T">PLSRVTYPE = =SWITCH=</Trace>
<Trace level="3" type="T">ADRESSMOD = SD</Trace>
<Trace level="3" type="T">P_CLASS =</Trace>
<Trace level="3" type="T">P_IFNAME =</Trace>
<Trace level="3" type="T">P_METHOD =</Trace>
<Trace level="3" type="T">FL_LOG =</Trace>
<Trace level="3" type="T">FL_DUMMY = 0</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">Unknown channel type: File</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">Pipeline service specification (table SXMSPLSRV)</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_CALL_ADAPTER</Trace>
<Trace level="3" type="T">PLSRVTYPE = AENGINE</Trace>
<Trace level="3" type="T">ADRESSMOD = SD</Trace>
<Trace level="3" type="T">P_CLASS = CL_XMS_PLSRV_IE_ADAPTER</Trace>
<Trace level="3" type="T">P_IFNAME = IF_XMS_PLSRV</Trace>
<Trace level="3" type="T">P_METHOD = ENTER_PLSRV</Trace>
<Trace level="3" type="T">FL_LOG =</Trace>
<Trace level="3" type="T">FL_DUMMY = 0</Trace>
<Trace level="3" type="T" />
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV_LOCAL" />
- 
- <Trace level="1" type="B" name="CL_XMS_PLSRV_IE_ADAPTER-ENTER_PLSRV">
<Trace level="3" type="T">Channel for adapter engine: File</Trace>
- <Trace level="1" type="B" name="CL_XMS_PLSRV_CALL_XMB-CALL_XMS_HTTP">
<Trace level="2" type="T">old values in cache (no lock found) - start reading from SLD</Trace>
<Trace level="1" type="T">error reading SAP_XIAdapterFramework from SLD</Trace>
<Trace level="2" type="T">Adapter Framework(s) found</Trace>
<Trace level="2" type="T">Service Port(s) found - take first one</Trace>
<Trace level="2" type="T">URL found</Trace>
<Trace level="2" type="T">Get logon data for adapter engine (SAI_AE_DETAILS_GET):</Trace>
<Trace level="3" type="T">URL = http://sapqxh:52000/MessagingSystem/receive/AFW/XI</Trace>
<Trace level="3" type="T">User = PIISUSER</Trace>
<Trace level="3" type="T">Cached =</Trace>
<Trace level="3" type="T">Creating HTTP-client</Trace>
<Trace level="3" type="T">HTTP-client: creation finished</Trace>
<Trace level="3" type="T">Security: Basic authentication</Trace>
<Trace level="3" type="T">Serializing message object...</Trace>
<Trace level="3" type="T">HTTP-client: sending http-request...</Trace>
<Trace level="3" type="T">HTTP-client: request sent</Trace>
<Trace level="3" type="T">HTTP-client: Receiving http-response...</Trace>
<Trace level="3" type="T">HTTP-client: response received</Trace>
<Trace level="3" type="T">HTTP-client: checking status code...</Trace>
<Trace level="3" type="T">HTTP-client: status code = 200</Trace>
<Trace level="3" type="T">Deserializing message object...</Trace>
<Trace level="1" type="T">Empty response received!</Trace>
<Trace level="3" type="System_Error">HTTP-client: error response=</Trace>
<Trace level="3" type="T">HTTP-client: closing...</Trace>
</Trace>
</Trace>
</Trace>
- <Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_LOG_TO_PERSIST">
<Trace level="3" type="T">Persisting message after plsrv call</Trace>
<Trace level="3" type="T">Message-Version = 007</Trace>
<Trace level="3" type="T">Message version 007</Trace>
<Trace level="3" type="T">Pipeline CENTRAL</Trace>
</Trace>
<Trace level="3" type="System_Error">Error exception return from pipeline processing!</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_TO_PERSIST" />
- 
<Trace level="3" type="T">Persisting message Status = 014</Trace>
<Trace level="3" type="T">Message version 008</Trace>
<Trace level="3" type="T">Pipeline CENTRAL</Trace>
</SAP:Trace>

Question about my serial number?

I received the Adobe CS5 Master Collection from my university, and did all the process of sending my information and my I.D. scan to adobe. After three days they successfully got back to me with a serial number, however, that does not seem to be the one that I have to use because that one contains letters and a larger amount of numbers of what the program asks to fit in. I re-opened my case but I want to make sure that it is not me the one making the mistake.
my process was:
recieved the box with the DVDs
filled my information and sent adobe my ID and Coupon Code
recieved the email with the wrong serial
installed the program, and when I was prompted to type in it, it wouldn't let me type the words. and when I typed only the numbers, I couldnt fit them all and recieved an invalid serial message.
re-opened my case with this information.
another thing that might be helpfull, is that on the email it said: "CS5 Master Collection: Color Finesse CS5: **** (serial #) etc.... "
so what is Color Finesse, is that something different and what have may caused this?
any quicker solutions?
thank you.

Hi, J. Davis!
Regardless of who does the logic board replacement, you'll still lose the System Profiler info on the serial number.
Here's a view of my own G4's System Profiler, for which Apple replaced the board a few years back. Please note the blank serial number for the last entry.
Gary
1GHz DP G4 Quicksilver 2002, 400MHz B&W rev.2 G3, Mac SE30 Mac OS X (10.4.5) 5G iPod, Epson 2200 & R300 & LW Select 360 Printers, Epson 3200 Scanner

The Proper way to go - Passing Serialized Java Objects vs. Web Services?

The team which I am apart of in our little "community" is trying to convince some "others" (management) that we should not use web services to communicate (move large data) within the same application (allbeit a huge application spanning across many servers).
Furthermore these "others" are trying to tell us that in this same application when two small apps. inside of this large app. are both java we should not communicate via serialized java objects but instead we should use Web Services and XML. We are trying to convince them that the simplest way is best.
They have asked us to provide them with proof that passing serialized java objects back and forth between two smaller java applications inside of a larger one is an Industry Standard. Can anyone help either straighten my fellow workers and I out or help us convince the "others" of the proper way to go?

When I was a consultant we always gave the client what they wanted. Even if it was the wrong choice. Suck it up.
I'm glad I wasn't one of those customers. Although I agree that a customer is the one who decides what to do, when I pay someone for consultancy, I expect them to consult me. If they know I'm trying to do something that I shouldn't be doing, I expect a good consultant to be able to show me that there's a better way (not just tell me I'm not doing it right, mind you).
We pass a lot of data using XML and we don't have any transmission or processing speed issues.
Then you either have a much better network than our customer did, or we're not talking about the same amounts of data here.
I used the JAX-RPC RI ...
That's cool... our customer was, unfortunately, infected with Borland products, so we had to use BES. The web services on BES were run by Axis.
How large were these messages?
Huge... each element had about 15 attributes, so 1,200 elements would require 19,200 XML nodes (envelope not included). By comparison, the serialized messages weren't even a quarter that size. It's not just about what you send across the network; it's also the effort of parsing XML compared to desrializing Java objects. Our web service wasn't exactly the only process running at the server.
Anyone who understand the fundamental difference between ASCII (XML) and binary (serialized) formats realizes that no web service can possibly achieve the performance of binary Java services. Why do you think that work is being put into binary web services? I'm not saying XML is never a good thing; just that it's not The Holy Grail that a lot of people are making it look like.
http://issues.apache.org/jira/browse/AXIS-688
Ouch.

Simulate RS 422 serial messages

Similar Messages

Maybe you are looking for