Simulation not running

Hello,
i have BPA 10.1.3.3 and have following problem. After i prepare an EPC model in BPA, fill out required attributes i want to start simulation.
After the initilization the simulation starts to run - but after few seconds it stops (i tried to reinstall it like 10times, removed all DBs etc..)
Does anyone have same problem? Do you know how to solve it?

I think we need more information about the issue you are running into. After the simulation stops, do you see any results in the Simulation view. It may be that the probability on one of the connection that completes the process is set to 1.
Best Regards,
Sidda

Similar Messages

My device is not running correctly as my simulator

Hi,
I just downloaded and installed new Xcode 3.2 in my Mac.
Everything is correct with my simulator except my device which is not running correctly.
From Organizer, my iPhone Software version is 3.1(7C144), when I run Simulator 3.1 is correct, but not with device 3.1, could someone help me ?
Thanks.
parislee

parislee wrote:
Hi,
I just downloaded and installed new Xcode 3.2 in my Mac.
Everything is correct with my simulator except my device which is not running correctly.
From Organizer, my iPhone Software version is 3.1(7C144), when I run Simulator 3.1 is correct, but not with device 3.1, could someone help me ?
The advisory info below* is different than the previously mentioned string:
ln -s /Developer/Platforms/iPhoneOS.platform/DeviceSupport/3.0 (7A341) /Developer/Platforms/iPhoneOS.platform/DeviceSupport/3.1
I'm not sure which issue you are addressing or which fix you are using or which you need now, sorry but the recent notice below may be of some use. Please study to decide where you're at now before proceeding, thanks.
-=-=-=-
http://adcdownload.apple.com/iphone/iphonesdk_3.1__final/iphone_os_3.1.1advisory.pdf
*iPhone OS 3.1.1 Advisory iPhone SDK 3.1 and iPhone OS 3.1.1 for iPod touch (3rd generation)
If you installed iPhone SDK 3.1 prior to September 21st, 2009, please perform the following to continue development with your iPod touch (3rd generation).
The following does not need to be performed if you are developing with any iPhone, iPhone 3G, iPhone 3GS, iPod touch 1st or 2nd generation.
1. Log into your Mac with an Admin account and launch the Terminal application (/Applications/Utilities)
2. Copy and paste the following line into Terminal ln -s /Developer/Platforms/iPhoneOS.platform/DeviceSupport/3.1.1 (7C145) /Developer/Platforms/iPhoneOS.platform/DeviceSupport/3.1.1 (7C146)

Simulation does not run at all

I have made up some diodes using the component wizard, such that the diode acts like a perfect switch at 0.7 volts. For some reason SPICE simulation does not run. If I include one of these diodes in other circuits, the circuit will not simulate. So the diode model is the problem. Any ideas how to get it working? Attached is the multisim file
Thanks in advance!
Solved!
Go to Solution.
Attachments:
perfectbridge.ms13 ‏62 KB

"------ Checking SPICE netlist for perfectbridge - Thursday, February 05, 2015, 11:51:34 AM ------
======= SPICE Netlist check completed, 0 error(s), 0 warning(s) =======
Model 'diodeperfect__perfectdiodes__1': Parameter 'IS' must be greater than zero
doAnalyses: Incorrect use of model parameters
Simulation canceled"
So: Right click on one of the diodes, select "Properties" - "Value" Tab - Press "Edit model" button - Check "Use default" box for "IS" - Press "Change all 4 components" button - Press "OK".

Payroll - Check for Previous Period which did not run before

Hi all,
I have an employee who was terminated hence payroll was not run for him from his poiint of termination, i.e. he was terminated from period 03, 04, 05 onwards.
Now currently it is period 06,... I wish to run payroll for him, for his period 03, 04, 05, I need to be able to detect that I am running payroll for the 2 conditions:
1) That the period i'm running FOR (03,04,05) is before the currnet period.
2) And that for periods 03, 04, 05 I am running the payroll for this employee for the FIRST TIME.
Are there any commands in the schema that I can use to know this?
Regards,
Kevin

Hi Kevin
When simulation or payroll is running for the employee at the bottom of the screen it tells you which period it is processing as payroll runs thru each pay period.
The log when expanded also does the same. If an employee has not had pay run for 3 months prior it is still a retro. Also check info type 0003 see if the PDC recalc date has been set and this will tell you how far back pay will run, if pay has been run the pay results.
if its the schema commands then print your paryoll schema to the screen and then expand and search for "retro", this will give you the retro commands or run program RPDASC00 and fill in the schema name etc.
Rona

Convesations App not running on E75

Hi I have installed the conversations app on my E75 but it is not running. Pls advise on how to get it to work/work around!

Did you test in the Simulator for 2.1?
I tested it in the Simulator for 2.1 and it works fine.
HOWEVER - my app doesn't work in in 2.1 for various people either. (Two emailed reports, which means probably a lot more are getting hit by this and not emailing)
And I really don't use any undocumented APIs. I do set a transform on a view, however.
My guess is they fixed a bug to do with transforms and views, which broke my App in 2.1. Sadly, this fix doesn't seem to be on the Simulator.
So I can't verify unless I update my iPod Touch to 2.1 .. which I can't do because iTunes says my version is apparently up to date for 2.0.
Crazy. Gotta find a way to get 2.1 on my iPod touch. Any suggestions?

Simulative MRP Run

Hello everybody,
I have a question about the MRP Run, and the way we could implement our way to work...
For the moment, some raw materials (bottom of the BOM's) are used with MRP Type "VB".
This allows MRP to create purchase requisitions following min/max levels.
We would like to keep this for the moment.
But we also would like to enter a ticket (= needed quantities) for one month on the top items of the BOM's, and run the MRP to see the raw materials requirements.
But, "just to see"... not to order in reality...
Is it possible?
In fact, it's a kind of "simulative" MRP Run...
In the future, we will have to order the raw materials, following the requirements generated from the ticket.
BUT
we will have also the real requirements on raw materials to cover the needs of the production.
Do you think it is possible to use MRP Run in both ways?
My feeling is that it is impossible, but I would like to have a feedback of experts on this.
In our "old" system, which SAP is designed to replace, we have the possibility to do this:
- We have a schedule on the BOM top-items;
- We run the requirements calculation;
- We get the raw materials requirements used for production/logistic.
But we also have this (separetely of course):
- We have a ticket (kind of schedule for a longer period) on the BOM top-items;
- We run the requirements calculation;
- We get the raw materials requirements used for purchasing.
We can do both in the system, but of course, in 2 different transactions (which are separate).
Do you think this is possible in SAP?
I hope this is not too confusing at reading... Anyway, thanks a lot in advance for your help on this subject.
Regards,
Rudy

Hello Rudy ,
Here is the idea behin Simulative MRP Run
Single-item, multi-level planning in simulative mode enables you to check the results during the planning run and to make adjustments. In contrast to planning with the parameter Display results before saving, the system displays problems with lower-level assemblies or with components on a higher-level or on the finished-product level and these can be solved immediately.
All the materials in a BOM structure are planned top-down.
All changes are saved in the main memory. The results are not entered in the database until after changes are saved.
For problems with dates such as order dates in the past, the system sets an exception message in the planned order of the higher-level material or in the planned order of the finished product and displays the delay. If there is a delay, the system displays the total number of days that a planned order is delayed due to a problem with a lower-level assembly or component. The system displays this information in two additional columns in the planning result of the finished product.
If the start date of an assembly for a finished product is 3 days in the past and the start date of the component that is installed in the assembly is 5 days in the past, the system displays a delay time of 8 days in the planning result of the finished product.
Evaluation functions such as the order report and the pegging function enable you to quickly find the procurement element causing the delay or the exception message.
You can change the relevant procurement elements and repeat the planning run for the next lower level of the BOM. The system then automatically firms the changed MRP elements.
Action Required : Goto MD01 you have to select the Simulation mode field in the initial screen for the single-item, multi-level planning run and started the planning run.
Hope thi will give you the idea about your requirement.
Reward point if useful.
Regards
Jia

Windows Azure Cloud Service with MVC4WebRole template giving "Not running in a hosted service or the Development Fabric." Error.

Azure SDK used - 1.7 & 2.0
When we create new project for Windows Azure Cloud Service with MVC4WebRole template & try to run it locally its giving error as "Not running in a hosted service or the Development Fabric."
We are aware that making Azure project as start up project will resolve this error but we want to run the application locally before testing it with cloud.
It’s not working with Cassini so we have tried with IIS but still it’s giving the same error.
In another project when we added ASP.Net MVC4 Application & then for that project we have generated the Azure cloud service project using "Add Windows Azure Cloud Service Project". By this way debugging it locally works fine.
Is there something additional settings present in Windows Azure Cloud Service with MVC4WebRole template which is causing this issue?

hello,
According your description, I try to reproduce it in my PC.
>1. I create a could project and add a MVC4 web role into project.
>2. I set the azure project as a start project and run, it works fine.
>3. I change the MVC4 web role as a startup project and run, it works fine too. Of course before this, I exited the Azure Simulator.
But this project was a empty project. It didn't included azure DLL file, such as Diagnostics file. So I think you could comment out the "system.diagnostics" node and try again. Also, you could refer to this same thread:http://stackoverflow.com/questions/13879443/not-running-in-a-hosted-service-or-the-development-fabric-production-not-debug
Regards,
Will
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

SAPOSCOL not running in MS Cluster

Hi, gurus:
We have a problem with SAPOSCOL in a SAP ECC 6.0 system (SAP ECC 6.0 + NetWeaver 7.00 + Oracle 10.2 + Windows Server 2003 R2 Enterprise x64 Edition) running over a MS cluster:
Transactions OS06/ST06 shows no data, and they show an info message wich states: SAPOSCOL not running ? (shared memory not available ). When we checked this issue, we noticed that, in fact, there is no sapcoscol.exe task running in any node.
But when we try to start the service (both using microsoft services console and cmd commands) although we can see the process running in the node which owns all the resources, SAP seems not notice that. The information system shows in ST06>Operating System Collector>Status is the following:
iinterval             0             sec.
Collector Version:
Date/time             05.09.2008 16:55:01
Start of Collector
Status report
Collector Versions
running                                   COLL 20.95     700     - 20.64     NT 07/10/17
dialog                                   COLL 20.95     700     - 20.65     NT 08/02/06
Shared Memory                              attached
Number of records                         575
Active Flag                              active     (01)
Operating System                         Windows NT     5.2.3790 SP     2 BL-SAP2 4x AMD64 Level 1
Collector PID                              0 (00000000)
Collector                                   not running (process ID not found).
Start time coll.                              Thu Jan 01     01:00:00 1970
Current     Time                              Fri Sep 05     16:55:01 2008
Last write access                         Mon Sep 01     11:28:23 2008
Last Read Access                         Fri Sep 05     15:54:00 2008
Collection Interval                         10     sec     (next delay).
Collection Interval                         10     sec     (last ).
Status                                   read
Collect     Details                         required
Refresh                                   required
Header Extention Structure
Number of x-header          Records          1
Number of Communication     Records          60
Number of free Com.          Records          60
Resulting offset to     1.data rec.               61
Trace level                                   3
Collector in IDLE -     mode ?               NO
become idle after     300     sec     without     read access.|
Length of     Idle Interval                    60     sec
Length of     norm.Interval                    10     sec
But saposcol.exe is running with a certain PID in the same note than SAP and Oracle under user sapservice<sid>
We have tried to run saposcol in several ways (as, I have noted before: from microsoft service console, from cmd line using "net start saposcol", using the saposcol under C:\WINDOWS\SapCluster and the one under
F:\usr\sap\PRD\sys\exe\run, fom the two nodes, accessing the cluster through several IPs...) and tried the commands saposcol -c and saposcol -k but we cannot get the saposcoll run. Moreover, we haven't found any log information. The only log we (and SAP) could find is the one located in C:\WINDOWS\SapCluster\dev_coll.
This log remain frozen at September 1st:
      SAPOSCOL version COLL 20.95 700 - 20.64 NT 07/10/17, 64 bit, multithreaded, Non-Unicode
      compiled at   Feb 3 2008
      systemid      562 (PC with Windows NT)
      relno         7000
      patch text    COLL 20.95 700 - 20.64 NT 07/10/17
      patchno       146
      intno         20050900
      running on    BL-SAP2 Windows NT 5.2 3790 Service Pack 2 4x AMD64 Level 15 (Mod 65 Step 3)
12:04:16 01.09.2008   LOG: Profile          : no profile used
12:04:16 01.09.2008   LOG: Saposcol Version : [COLL 20.95 700 - 20.64 NT 07/10/17]
12:04:16 01.09.2008   LOG: Working directory : C:\WINDOWS\SAPCLU~1
12:04:16 01.09.2008   LOG: Allocate Counter Buffer [10000 Bytes]
12:04:16 01.09.2008   LOG: Allocate Instance Buffer [10000 Bytes]
12:04:17 01.09.2008   LOG: Shared Memory Size: 71898.
12:04:17 01.09.2008   LOG: Connected to existing shared memory.
12:04:17 01.09.2008   LOG: MaxRecords = 575 <> RecordCnt + Dta_offset = 614 + 61
12:04:22 01.09.2008 WARNING: WaitFree: could not set new shared memory status after 5 sec
12:04:22 01.09.2008 WARNING: Cannot create Shared Memory
Kernel Info:
Kernel release    700
Compilation        NT 5.2 3790 Service Pack 1 x86 MS VC++ 14.00
Sup.Pkg lvl.       146
ABAP Load       1563
CUA load           30
Mode                opt
Can anyone shed some light on the subject?
Thank you very much and kind regards
Edited by: Jose Enrique Sepulveda on Sep 6, 2008 2:10 AM

Dear bhaskar:
Thanks for your reply. We have considered balancing the system to the other node or reboot the system to free resources, in order to re-create the shared memory, but in the past, the balancing process (move resources from one node to the other) has caused problems. Since this is a critical system, stopping (or balancing) is not an option right now, and updating the kernel requires an ABAP stack reboot plus the kernel change : any changes in system configuration requires a longer approval/planning process than a reboot.
Moreover, the OS collecting system and its display in OS06/ST06 has worked fine until now.
Does anyone knows if a reboot has solved this kind of problem in a similar situation?
Thanks in advance
José Enrique

HT1349 I can not run the scanner in my main user, but only the second user and the same thing with updating apps! Why is this happening???

I can not run the scanner in my main user, but only the second user and the same thing with updating apps! Why is this happening???

Welcome to the Apple Community.
Enter the details of her second account at system preferences> mail, contacts & calendars.

When KM Scheduler is stopped or not running

Hi Experts,
I have created KM Scheduler using the blog https://www.sdn.sap.com/irj/scn/weblogs?blog=/pub/wlg/1515.Scheduled for every 30 mins.
In Systemadmin>Monitor> KM-->i can see whether Scheduler is running or not.
Now the requirement is to send a mail to the portal support team when Scheduler is stopped or not running. Is it possible?and how we can proceed?
Please guide me.
Sony.

Try the Firefox SafeMode. <br />
''A troubleshooting mode, which disables most Add-ons.'' <br />
''(If you're not using it, switch to the Default Theme.)''
# You can open the Firefox 4/5/6/7 SafeMode by holding the '''Shft''' key when you use the Firefox desktop or Start menu shortcut.
# Or use the Help menu item, click on '''Restart with Add-ons Disabled...''' while Firefox is running. <br />
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before using the Firefox shortcut (without the Shft key) to open it again.''
If it is good in the Firefox SafeMode, your problem is probably caused by an extension, and you need to figure out which one. <br />
http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes

KM Scheduler Task is not running...

Dear All,
I have created a KM Scheduler Task using the NDWS Wizard. I followed prakash's blog (http://www.sdn.sap.com/irj/scn/weblogs?blog=/pub/wlg/1515). My doubt is where exactly the attributes are created? and can any one guide how to create the attributes in .cc.xml file. And how does public void run( String id, Properties properties ) it works?
The application was successfully deployed. I am able to see my task under System Administration->System Configuration->Knowledge Management->Configuration->Content Management->Global Services->Scheduler Tasks. but I think it is not running. Can any one give some clue on this. As i'm not finding any thing uder Kmcontent>Documents.
Do i need to configure anything to run KM scheduler Task?
Thanks and Regards,
JAGAN.
Edited by: Jagan456533 on Jan 19, 2011 11:10 AM

Hi Jagan,
The status "0" for your task in "Component Monitor" is fine.
Navigate to System Administration> System Configuration>Service Configuration. You can see here Applications and Portal runtime.
Open Applications--> and you Task. Right click on your task folder and say Administrate. Here you check whether your task has been stopped, running. Make sure its running. ( Try refresh, if its already running ).
In you task folder, you will see "Service Folder" under this, you will see "RFServiceWrapper", right click on it and say configure, make sure the values are like shown below:
Name : http://sapportals.com/xmlns/cm/sch
Value: Value1
Also make sure in your portalapp.xml, the values are same:
RFServiceWrapper
service-config
className= com.sap.netweaver.rf.wrapper.RFServiceWrapper
startup= true
service-profile
Name= = http://sapportals.com/xmlns/sch
Prof= Value1
You see tha the same name is used "Value1" in RFServiceWrapper both in portalapp.xml and in Service Configuration.
You can use any other name but the it should be same in both the places.
Make all these changes, and then restart your task in Service configuration again. Any changes in portalappl.xml, restart is necessary.
Kind Regards,
Poornima

Why will firefox not start on my laptop? can't uninstall or open the profile manager either. it simply does not run. it used to work fine until i had to restore my system.

had firefox 4.0 & have been a user of firefox for a few years now. never had any problems. had to do a system restore after my computer detected a virus of some sort & i couldn't do anything. the virus kept popping up a bogus add for me to buy an antivirus program. had to restart laptop in safemode to initiate the restore. ever since then firefox has not opened. can't even uninstall it or open the profile manager. anything that has to do with firefox will simply not run/open at all. i'm stumped.

System restore can cause problems as well as solve them, it has probably completely mucked up your Firefox installation.
Try deleting your Firefox installation directory, the default location on 32 bit Windows is C:\Program Files\Mozilla Firefox\
Now re-install Firefox, it should pick up your current profile folder so you should not lose your bookmarks, passwords etc.

Oracle XE 11g x64 does not run. No *DBF files inside of the XE folder. Windows 7 Pro x64.

Hello everyone!
I hope you are doing well all. In my case I have some troubles by installing Oracle XE 11g on my PC. My OS is Windows 7 Pro x64.
1. I activated the Administrator mode on my PC (net user Administrator /active:yes)
2. Started the setup as Administrator. The setup process was finished successfully with no errors showed.
3. Started the Database, OracleServiceXE, OracleXETNListener and other services.
4. Tried to connect using sqlplus-> connect system ->password, what in result gave me ORA-01034 Oracle not available and ORA-27101 Shared memory realm does not exist errors.
5. Then I recognized that my C:\oraclexe\app\oracle\oradata\XE folder is empty when it should be usually full with 6 DBF file.
6. I opened the cloneDBCreation.log and it contains these data:
SQL> Create controlfile reuse set database "XE"
2 MAXINSTANCES 8
3 MAXLOGHISTORY 1
4 MAXLOGFILES 16
5 MAXLOGMEMBERS 3
6 MAXDATAFILES 100
7 Datafile
8 'C:\oraclexe\app\oracle\oradata\XE\system.dbf',
9 'C:\oraclexe\app\oracle\oradata\XE\undotbs1.dbf',
10 'C:\oraclexe\app\oracle\oradata\XE\sysaux.dbf',
11 'C:\oraclexe\app\oracle\oradata\XE\users.dbf'
12 LOGFILE
13 GROUP 1 SIZE 51200K,
14 GROUP 2 SIZE 51200K,
15 RESETLOGS;
SP2-0640: Not connected
SQL> exec dbms_backup_restore.zerodbid(0);
SP2-0640: Not connected
SP2-0641: "EXECUTE" requires connection to server
SQL> shutdown immediate;
ORA-12560: TNS:protocol adapter error
SQL> startup nomount pfile="C:\oraclexe\app\oracle\product\11.2.0\server\config\scripts\initXETemp.ora";
ORA-12560: TNS:protocol adapter error
SQL> Create controlfile reuse set database "XE"
2 MAXINSTANCES 8
3 MAXLOGHISTORY 1
4 MAXLOGFILES 16
5 MAXLOGMEMBERS 3
6 MAXDATAFILES 100
7 Datafile
8 'C:\oraclexe\app\oracle\oradata\XE\system.dbf',
9 'C:\oraclexe\app\oracle\oradata\XE\undotbs1.dbf',
10 'C:\oraclexe\app\oracle\oradata\XE\sysaux.dbf',
11 'C:\oraclexe\app\oracle\oradata\XE\users.dbf'
12 LOGFILE
13 GROUP 1 SIZE 51200K,
14 GROUP 2 SIZE 51200K,
15 RESETLOGS;
SP2-0640: Not connected
SQL> alter system enable restricted session;
SP2-0640: Not connected
SQL> alter database "XE" open resetlogs;
SP2-0640: Not connected
SQL> alter database rename global_name to "XE";
SP2-0640: Not connected
SQL> alter system switch logfile;
SP2-0640: Not connected
SQL> alter system checkpoint;
SP2-0640: Not connected
SQL> alter database drop logfile group 3;
SP2-0640: Not connected
SQL> ALTER TABLESPACE TEMP ADD TEMPFILE 'C:\oraclexe\app\oracle\oradata\XE\temp.dbf' SIZE 20480K REUSE AUTOEXTEND ON NEXT 640K MAXSIZE UNLIMITED;
SP2-0640: Not connected
SQL> select tablespace_name from dba_tablespaces where tablespace_name='USERS';
SP2-0640: Not connected
SQL> select sid, program, serial#, username from v$session;
SP2-0640: Not connected
SQL> alter user sys identified by "&&sysPassword";
SP2-0640: Not connected
SQL> alter user system identified by "&&systemPassword";
SP2-0640: Not connected
SQL> alter system disable restricted session;
SP2-0640: Not connected
SQL> @C:\oraclexe\app\oracle\product\11.2.0\server\config\scripts\postScripts.sql
SQL> connect "SYS"/"&&sysPassword" as SYSDBA
ERROR:
ORA-12560: TNS:protocol adapter error
SQL> set echo on
SQL> spool C:\oraclexe\app\oracle\product\11.2.0\server\config\log\postScripts.log
I spent around 2 days to come to this reason and now I do not know what to do next.
My actions to resolve this problem:
1. Checked if my user has administrative rights and belongs to ora_dba. It does!
2. Turned Microsoft UAC off.
3. Set the system and local variables of ORACLE_BASE, ORACLE_HOME, ORACLE_SID, PATH, TNS-ADMIN to the appropriate values in Enivornment Variables:
     - ORACLE_BASE -> C:\oraclexe
     - ORACLE_HOME -> %ORACLE_BASE%\app\oracle\product\11.2.0\server
     - ORACLE_SID -> XE
     - Added to PATH -> C:\oraclexe\app\oracle\product\11.2.0\server\bin;
     - TNS_ADMIN -> %ORACLE_HOME%\network\admin
4. Removed Oracle XE 11g and reinstalled to another drive. No sense!
Some more errors:
1. C:\oraclexe\app\oracle\product\11.2.0\server\config\log\XE.bat.log
Instance created.
DIM-00019: create service error
O/S-Error: (OS 1387) Ein Mitglied konnte in der lokalen Gruppe nicht hinzugefugt oder entfernt werden, da das Mitglied nicht vorhanden ist.
It means -> O/S-Error: (OS 1387) Unable to add or remove a member from the local group because this member does not exist.
I understand that I need to logon as batch job. I added me to this policy in User Rights Assignments, but still I get these "DIM-00019: create service error" and "O/S-Error: (OS 1387)". And I guess just therefore my database is not starting well.
2. 127.0.0.1:8080/apex/f?p=4950 is not starting in browser. It is probably because the database is not running appropriately. For this issue have already seen one topic in Google that the HTTP Properties inside the Listener Status must be set to 8080 to make this link work. But in my case I do not see this line in my Listener Status:
Some other information relevant to the issue:
1) echo %USERNAME% - Administrator
     echo %USERDOMAIN% - ildar-PC
2) Listener.log:
SID_LIST_LISTENER =
(SID_LIST =
    (SID_DESC =
      (SID_NAME = PLSExtProc)
      (ORACLE_HOME = C:\oraclexe\app\oracle\product\11.2.0\server)
      (PROGRAM = extproc)
    (SID_DESC =
      (SID_NAME = CLRExtProc)
      (ORACLE_HOME = C:\oraclexe\app\oracle\product\11.2.0\server)
      (PROGRAM = extproc)
LISTENER =
(DESCRIPTION_LIST =
    (DESCRIPTION =
      (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1))
      (ADDRESS = (PROTOCOL = TCP)(HOST = ildar-PC)(PORT = 1521))
DEFAULT_SERVICE_LISTENER = (XE)
3) Tnsnames.log
XE =
(DESCRIPTION =
    (ADDRESS = (PROTOCOL = TCP)(HOST = ildar-PC)(PORT = 1521))
    (CONNECT_DATA =
      (SERVER = DEDICATED)
      (SERVICE_NAME = XE)
EXTPROC_CONNECTION_DATA =
(DESCRIPTION =
    (ADDRESS_LIST =
      (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1))
    (CONNECT_DATA =
      (SID = PLSExtProc)
      (PRESENTATION = RO)
ORACLR_CONNECTION_DATA =
(DESCRIPTION =
    (ADDRESS_LIST =
      (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1))
    (CONNECT_DATA =
      (SID = CLRExtProc)
      (PRESENTATION = RO)
4) Sqlnet.log:
SQLNET.AUTHENTICATION_SERVICES = (NTS)
5) While connecting by sqlplus, I get this errors/messages:
6) Confirmation that I've got admin rights and I am in ORA_DBA:
If u need some more information from me, please let me know!!
Guys please help me to solve this issue, 'cause I've almost got frustrated to find out the solution of this problem. Thank you beforehand!!
Kind regards,
ildar

I have tried to install both of them lots of times but in each case I receive the same in my XE.bat file:
Instance created.
DIM-00019: create service error
O/S-Error: (OS 1387) Unable to add or remove a member from the local group because this member does not exist.
Have checked OS 1387 error at Microsoft Support and as possible cause of the problem they give as follows:
This issue can occur if the environment has a disjointed namespace (i.e. the domain has different NetBIOS and DNS names). For example, assume that the domain has a NetBIOS name of "domain.com" and a DNS name of "domain-old.com." When users are added in the Windows UI, they are displayed in the format of domain\ComputerName. However, you notice in the error log that there was an attempt to add a computer account in the format of domain-old\ComputerName. (System Center 2012 R2 Data Protection Manager install fails and generates ID: 4323: "A member could not be added")
Tried to find out my DNS name, but it is impossible because I don't have any domain installed and my machine is not connected to it. Some other blog (Install Oracle 11gR2 on Windows) advices to work with adding my computer account to some non-real windows domain (just for the purpose of resolving the network) as well and reinstall the database then. If I undestand it right I need minimum 2 machines for this. But I own just one, where the server is based and thought that is enough to run the database... no idea ..

C6280 HP Solution Center will not run or install

I have been using my C6280 on my home network for years with Solution Center intalled on a desktop running Vista andtwo laptops running Windows 7 with only the print drivers installed. HP Update was eanbled on the desktop.
In the past two or three months, I started to get a number of error messages on my desktop indicating there was something wrong with Solution Center. The issue steadily worsened to the point where Solution Center would not run at all (unable to detect device seemed to be the most recurrent message) and I was unable to run the scanner.
I was able to maintain printer fnctionality by deleting and then adding the printer through Windows, although I seemed to be forced to do this every few days.
I went on the forum and decided the best course of action to restore full functionality was to uninstall all HP software and then download/install the software suite. I downloaded the Vista 32 bit version (100_228_PS_AIO_02_Full_Net_enu_NB.exe) andI tried installation several times with no luck - the installation always seemed to get stuck immediately after extracting files.
I went back on the forum and found out how to do a level 4 uninstall from a temp folder beginning with 7z... . I did that and tried again (after checking that my Adobe Flash was up to date). The install went a little further this time but eventually stopped again. File not found. I ran the installation .exe from the temp file and went a little further but stopped again. An error log was created and a 'fix' was placed on my desk top. I followed the instructions but the 'fix' did nothing (it was just a text file - nothing to run that I could decypher). Just to make sure I was doing it right, I repeated the entire uninstall/download/reinstall process two more times with the same result.
The above process was beginning to remind me of Einstein's defiition of insanity (do ing the same thing over and over and expecting different resuts) so I gave up and successfully downloaded and installed the printer drivers to restore print functionality.
How do I get my scan functionality back?
Thanks
This question was solved.
View Solution.

Hi,
May you have McAfee Antivirus on your PC?
If so try following the steps belwo and let me know if that may help:
1. Open Mcafee software, from the Virus and Spyware Protection section click on Schedule and run scans. Click on Real time scanning and then on Turn Off. select Never and confirm by clicking the Turn Off button.
2. Open the run dialog by clicking both the Windows key and the R key on your keyboard. Type %windir% and click on OK.
3. Type hpoins*.dat into the top search bar, if there are any results rename the extention into old instead of dat. (e.g. hpoins1.old)
4. Type hpwins*.dat into the top search bar, if there are any results rename the extention into old instead of dat. (e.g. hpwins1.old)
5. Launch the Run dialog by clicking both the Windows key and the R key on your keyboard. Type MSIEXEC /UNREGISTER into the Run dialog and click on OK.
6. Launch the Run dialog by clicking both the Windows key and the R key on your keyboard. Type MSIEXEC /REGSERVER into the Run dialog and click on OK.
7. Reboot your PC
8. Run the installation file and check for any difference.
9. Once you are done, be sure to open McAfee and re-activate Real Time Scanning.
If the issue persists, please clarify what security software you are using,
As well open the device manager and expend the Processors category - what processor you have on your PC?
Regards,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

QMASTER hints 4 usual trouble (QM NOT running/CLUSTEREd nodes/Networks etc

All, I just posted this with some hints & workaround with very common issues people have on this forum and keep asking concerning the use of APPLE QMASTER with FCP, SHAKE, COMPRESSOR and MOTION. I've had many over the last 2 years and see them coming up frequently.
Perhaps these symptoms are fixed in FCS2 at MAY 2007 (now). However if not here's some ROTS that i used for FCP to compressor via QMASTER cluster for example. NO special order but might help someone get around the stuff with QMASTER V2.3, FCP V5.1.4, compressor.app V2.3
I saw the latest QMASTER UI and usage at NAB2007 and it looked a little more solid with some "EASY SETUP" stuff. I hope it has been reworked underneath.. I guess I will know soon if it has.
For most FCP/COMPRESSOR, SHAKE. MOTION and COMPRESSOR:
• provide access from ALL nodes to ALL the source and target objects (files) on their VOLUMES. Simply MOUNT those volumes through the APPLE file system (via NFS) using +k (cmd+k) or finder/go/connect to server. OR using an SSAFS such as XSAN™ where the file systems are all shared over FC not the network. YOu will notice the CPU's going very busy for a small while. THhis is the APPLE FILE SYSTEM task,,, I guess it's doing 'spotlight stuff". This goes away after a few minutes.
• set the COMPRESSOR preferences for "CLUSTER OPTIONS" to "Never copy source to Cluster". This means that all nodes can access your source and target objects (files) over NFS (as above). Failure to to this means LENGTHY times to COPY material back an forth, in some cases undermining the pleasure gained from initially using clustering (reduced job times)
• DONT mix the PHYSICAL or LOGICAL networks in your local cluster. I dont know why but I could never get this to work. Physical mean stick with eother ETHERNET or FIREWIRE or your other (airport etc whic will be generally way to slow and useless), Logical measn leepin all nodes on the SAME subnet. You can do this siply by setting theis up in the system preferences/QMASTER/advanced tab under "Use Network Interfaces". In my currnet QUAd I set this to use BUILT IN ETHERNET1 and in the MPBDC's I set this to their BUILTIN ETHERNET.
• LOGICAL NETWORKS (Subnet): simply HARDCODE an IP address on the ETHERNET (for eample) for your cluster nodes andthe service controller. FOr eample 3.1.1.x .... it will all connect fine.
• Physical Networks: As above (1) DONT MIX firewire (IPoFW) and Ethernet(IPoE). (2) if more than extra service node USE A HUB or SWITCH. I went and bought a 10 port GbE HUB for about $HK400 (€40) and it worked fine. I was NEVER able to get a stable system of QMASTER mixing FW and ETHERNET. (3) fwiw using IP of FW caused me a LOAD of DISK errors and timouts (I/O errors) on thosse DISKs that were FW400 (al gone now) but it showed this was not stable overall
• for the cluster controller node MAKE SURE you set the CLUSTER STORAGE (system preferences/QMASTER/shared cluster storage) for the CLUSTER CONTROLLER NODE IS ON A SHARED volume (See above). This seems essential for SHAKE to work. (if not check the Qmaster errors in the console.app [see below] ). IF you have an SSAFS like XSAN™ then just add this cluster storage on a share file path. NOte that QMASTER does not permit the cluster storage to be on a NETWORK NODE for some reason. So in short just MOUNT the volume where the SHARED CLUSTER file is maintained for the CLUSTER controller.
• FCP - avoid EXPORT to COMPRESSOR from the TIMELINE - it never seems to work properly (see later). Instead EXPORT FROM SEQUENCE in the BROWSER - consistent results
• FCP - "media missing " messages on EXPORT to COMPRESSOR.. seems a defect in FCP 5.1 when you EXPORT using a sequence that is NOT in the "root" or primary trry in the FCP PROJECT BROWSER. Simply if you have browser/bin A contains(Bin B (contains Bin C (contains sequence X))) this will FAIL (wont work) for "EXPORT TO COMPRESSOR" if you use EXPORT to COMPRESSOR in a FCP browser PANE that is separately OPEN. To get around this, simply OPEN/EXPOSE the triangles/trees in the BROWSER PANE for the PROJECT and select the SEQUENCE you want and "EXPORT to COMPRESSOR" from there. This has been documented in a few places in this forum I think.
• FCP -> COMPRESSOR -> .M2V (for DVDSP3): some things here. EXPORTING from an FCP SEQUENCE with CHAPTER MARKERS to an MPEG2 .M2V encoding USING A CLUSTER causes errors in the placement of the chapter makers when it is imported to DVDSP3. In fact CONSISTENTLY, ALL the chapter markers are all PLACED AT THE END of the TRACK in DVD SP# - somewhat useless. This seems to happen ALSO when the source is an FCP reference movie, although inconsistent. A simple work around if you have the machines is TRUN OF SEGMENTING in the COMPRESSOR ENCODER inspector. let each .M2V transcode run on the same service node. FOr the jobs at hand just set up a CLUSTER and controller for each machine and then SELECT the cluster (myclusterA, hisclusterb, herclusterc) for each transcode job.. anyway for me.. the time spent resolving all this I could have TRANSCODED all this on my QUAD and it would all have ben done by sooner! (LOL)
• CONSOLE logs: IF QMASTER fails, I would suggest your fist port of diagnosis should be /Library/Logs/Qmaster in there you will see (on the controller node) compressor.log, jobcontroller.com.apple.qmaster.cluster.admin.log, and lots of others including service controller.com.apple.qmaster.executorX.log (for each cpu/core and node) andd qmasterca.log. All these are worth a look and for me helped me solve 90% of my qmaster errors and failures.
• MOTION 3 - fwiw.. EXPORT USING COMPRESSOR to a CLUSTER seems to fail EVERY TIME.. seems MOTION is writing stuff out to a /var/spool/qmaster
TROUBLESHOOTING QMASTER: IF QMASTER seems buggered up (hosed), then follow these steps PRIOR to restarting you machines.
go read the TROUBLE SHOOTING in the published APPLE docs for COMPRESSOR, SHAKE and "SET UP FOR DISTRIBUTED PROCESSING" and serach these forums CAREFULLY.. the answer is usually there somewhere.
ELSE THEN,, try these steps....
You'll feel that QMASTER is in trouble when you
• see that the QMASTER ICON at the top of the screen says 'NO SERVICES" even though that node is started and
• that the APPLE QMASTER ADMINSTRATOR is VERY SLOW after an 'APPLY" (like minutes with SPINNING BEACHBALL) or it WONT LET YOU DELETE a cluster or you see 'undefined' nodes in your cluster (meaning that one was shut down or had a network failure)..... all this means it's going to get worse and worse. SO DONT submit any more work to QAMSTER... best count you gains and follow this list next.
(a) in COMPRESSOR.app / RESET BACKGROUND PROCESSES (its under the COMPRESSOR name list box) see if things get kick started but you will lose all the work that has been done up to that point for COMPRESSOR.app
b) if no OK, then on EACH node in that cluster, STOP the QMASTER (system preferences/QMASTER/setup [set 0 minutes in the prompt and OK). Then when STOPPED, RESET the shared services my licking OPTION+CLICK on the "START" button to reveal the "RESET SERVICES". Then click "START" on each node to start the services. This has the actin of REMOVING or in the case where the CLUSTER CONTROLLER node is "RESET" f terminating the cluster that's under its control. IF so Simply go to APPLE QMASTER ADMINISTRATOR and REDFINE it. Go restart you cluster.
c) if step (b) is no help, consult the QMASTER logs in /Library/Logs/Qmaster (using the cosole.app) for any FILE MISSING or FILE not found or FILE ERROR . Look carefully for the NODENAME (the machine_name.local) where the error may have occured. Sometimes it's very chatty. Others it is not. ALso look in the BATCH MONITOR OUTPUT for errors messages. Often these are NEVER written (or I cant find them) in the /var/logs... try and resolve any issues you can see (mostly VOLUME or FILE path issues from my experience)
(d) if still no joy then - try removing all the 'dead' cluster files from /var/tmp/qmaster , /var/sppol/qmaster and also the file directory that you specified above for the controller to share the clustering. FOR shake issues, go do the same (note also where the shake shared cluster file path is - it can be also specified in the RENDER FILEOUT nodes prompt).
e) if all this WONT help you, its time to get the BIG hammer out. Simply, STOP all nodes of not stopped. (if status/mode is "STOPPING" then it [QMASTER] is truly buggered). DISMOUNT the network volumes you had mounted. and RESTART ALL YOUR NODES. Tis has the affect of RESTARTING all the QMASTERD tasks. YEs sure you can go in and SUDO restart them but it is dodgy at best because they never seem to terminate cleanly (Kill -9 etc) or FORCE QUIT.... is what one ends up doing and then STILL having to restart.
f) after restart perform steps from (B) again and it will be usually (but not always) right after that
LAstly - here's some posts I have made that may help others for QMASTER 2.3 .. and not for the NEW QMASTER as at MAy 2007...
Topic "qmasterd not running" - how this happened and what we did to fix it. - http://discussions.apple.com/message.jspa?messageID=4168064#4168064
Topic: IP over Firewire AND Ethernet connected cluster? http://discussions.apple.com/message.jspa?messageID=4171772#4171772
LAstly spend some DEDICATED time to using OBJECTIVE keywords to search the FINAL CUT PRO, SHAKE, COMPRESSOR , MOTION and QMASTER forums
hope thats helps.
G5 QUAD 8GB ram w/3.5TB + 2 x 15in MBPCore Mac OS X (10.4.9) FCS1, SHAKE 4.1

Warwick,
Thanks for joining the forum and for doing all this work and posting your results for our benefit.
As FCP2 arrives in our shop, we will try once again to make sense of it and to see if we can boost our efficiencies in rendering big projects and getting Compressor to embrace five or six idle Macs.
Nonetheless, I am still in "Major Disbelief Mode" that Apple has done so little to make this software actually useful.
bogiesan

Simulation not running

Similar Messages

Maybe you are looking for