Simultaneous opening of programmes with automator

I would like to configure the system so that iWebSEO opens up every time I launch iWeb since I need to use them both together every time.
Is this possible in automator? I can't seem to find iWeb in the actions or variables library

Not all applications provide Automator actions, so they won't necessarily show up in the actions library. For an Automator solution, you can use a couple of *Launch Application* actions in your workflow to launch the desired applications.

Similar Messages

Using Automator to open a program with a delay after a programmed restart

Hi to all! With my old PowerPc I used to start unattended sessions of my Newsreader (Unison) overnight simply putting Unison in my Login elements window, and programming a restart at a fixed hour. Unfortunately, with my very fast new iMac this doesn't work: Unison opens too fast after the programmed restart, before a network connection has been established, and Unison is unable to see the NewsServer online when it starts (error "nodelist not found", typical of a not yet established Internet connection). Note that I downgrade to Unison 1.8.x to do this, as the Unison 2.x program cannot be closed with a session running to resume it after start: it simply defaults to "Pause transfers" after quitting, and need a clic on "Resume" after reopening.
Obviously, what I need is to introduce a "wait (say) 2 minutes before the opening of Unison", or anything that can check the Internet connection before Unison starts. May anyone instruct me to do this with Automator and/or AppleScript?
In fact, I tried to generate a workflow in Automator, with a Pause after the start of the process, then the instruction to open Unison. I put the saved workflow in my Login elements, but it didn't work on my iMac 27, i7Core, Snow Leopard installed. I added an "execute workflow" at beginning of the process, but the Pause command gives always an error and the process stops before Unison' opening.
Any suggestion or help in writing an Automator or AppleScript workflow/script to be put among the startup items?
Thanks a lot!

I am trying to use Automator to restart an application. I figured how to quit the application, however when I relaunch it, it asks for password permission... how can I use automator to enter the password? or is there a way to launch the software with password in a script?

I need to open a file with an associated programm.

I need to open a file with an associated programm.
I'm looking for two solutions:
1. for Linux/Solaris/Unix/...
2. for Windows 95/98/Nt/2000
For Windows I have done this with command line
Runtime.getRuntime().exec("rundll32 url.dll,FileProtocolHandler " + uSavePath);
but it doesn't work on windows2000. We need an universal solution.
For linux
Process p = Runtime.getRuntime().exec("netscape openURL " + uSavePath);
But may be anybody know better solution?

You are right. For unix better solution is that my program to care about all association itself. As I undestend now it's a common solution for unix applications.
But for windows it will be ugly enough. I've found another way for windows
Win2000/NT: "cmd /C start filename /B"
other Wins: start filename
for linux I've stopped at doing this via Netscape.
May be in future I'll make my property file.
start filename - on Win95(may be 98/ME) returns -1 if file not assotiated with a programm, and doesn't shows openWith dialog. It solved using something like "rundll32 shell32, OpenWith filename"
It's all for those how will solve this problem in future.

Ven though i have a year student subscription with creative cloud when i try to open the programmes a window comes up for free trial or to buy the product. I was clicking the free trial option but i guess thats over now so it won't allow me to access the

Even though i have a year student subscription with creative cloud when i try to open the programmes a window comes up for free trial or to buy the product. I was clicking the free trial option but i guess thats over now so it won't allow me to access the programs. Any suggestions?

Hi natasachara,
Please refer to the details about the student plan below:
Creative Cloud Help | Creative Cloud for Students and Teachers / Common Questions
Regards,
Sheena

How to open a URL with a "#" in Automator?

I am trying to open a url in Automator using the "Display Webpages" action. The URL I need to open has a hash within it -- e.g. http://translate.google.com/#fr|en|testing. Automator URL encodes the # to %23. I can't figure out how to prevent it from escaping the anchor charater. FWIW, the terminal command...
/usr/bin/open "http://translate.google.com/#fr|en|Text"
does the exact same thing. Anyone know how to stop the # from being encoded?

Hi,
I have the exact same problem but I don't have a bar. I'm trying to use this URL "http://translate.google.com/#auto/en/" but the script changes the # to %23. Any ideas? Thanks
Edit:
OK, that's starting to get weird. I tried using this URL instead "http://translate.google.com/#auto%7Cen%7C". When I put it directly in the browser it works which means that it is correct. When I use it through Automator it keeps changing the # to %23. Now the weird part. If I put #fr like the original poster it doesn't change it. It only change it with #auto. Anyone have any suggestions? Thank you.
Message was edited by: j.giazlas

Opening a folder with an application in one click, and automating Terminal

A forum member kindly recommended I move a question from 'Mac OS X Leopard' to this sub-forum as it was more appropriate to Unix:
Firstly, is it possible to create a desktop/dock icon (or perhaps a Safari or FireFox bookmark) that opens a folder with a certain application? I'm doing a lot of web development and hoping to create handy buttons for opening up entire folders (Ruby on Rails projects) with only one click. At the moment, I have to find the folder and drag it to the textmate icon; if I had a 'open in textmate' button, that would make my work so much quicker, as I'm often changing between projects. It would be even better if I could have the button as a bookmark in my browser (where I spend most of my time).
Secondly (probably related to the first question), is it possible to automate a process I follow every time I open up a Ruby on Rails project in Terminal (?);
1. Load Terminal by clicking on the icon in the dock
2. 'cd sites/rubyonrailsapp' (where 'rubyonrailsapp' is the rails application I want to load)
3. 'mate .' (opens the entire /rubyonrails/ folder in TextMate)
4. 'CMD + T' (to open up a new Terminal tab)
5. 'gitk --all &' (to open up the Wish version control interface for the rails application)
6. 'autotest' (to runs the tests in the rails application)
7. 'CMD + T' (to open up another new Terminal tab, ready for me to use)
If I could follow those steps with only one click, that would be amazing, so any suggestions are much appreciated (I just realised how many times-per-day I'm typing these commands).
Cheers

you can try this applescript. just copy it into the Script Editor and save it (1) as a script application that you can double-click, or (2) as a script that you can run from the script menu or quickkeys or etc. may need some tweaking...
<pre class="jive-pre">tell application "Terminal"
set cmd to "cd sites/rubyonrailsapp; mate ."
do script cmd
activate
end tell
tell application "System Events"
keystroke "t" using command down
end tell
tell application "Terminal"
set cmd to "gitk --all & autotest;"
do script cmd
activate
end tell
tell application "System Events"
keystroke "t" using command down
end tell</pre>
to solve your other question, you'll probably need to script textmate. something like:
<pre class="jive-pre">tell application "TextMate"
open alias "path:to:folder"
end tell</pre>
I don't have textmate to test it on, however.
sorry it's not a unix solution, but the task you're trying to accomplish fits better with applescript.
Message was edited by: twtwtw - sorry, wrong quote style...

Opening a folder with an application in one click, and automating a process

Firstly, is it possible to create a desktop/dock icon (or perhaps a Safari or FireFox bookmark) that opens a folder with a certain application? I'm doing a lot of web development and hoping to create handy buttons for opening up entire folders (Ruby on Rails projects) with only one click. At the moment, I have to find the folder and drag it to the textmate icon; if I had a 'open in textmate' button, that would make my work so much quicker, as I'm often changing between projects. It would be even better if I could have the button as a bookmark in my browser (where I spend most of my time).
Secondly (probably related to the first question), is it possible to automate a process I follow every time I open up a Ruby on Rails project in Terminal (?);
1. Load Terminal by clicking on the icon in the dock
2. 'cd sites/rubyonrailsapp' (where 'rubyonrailsapp' is the rails application I want to load)
3. 'mate .' (opens the entire /rubyonrails/ folder in TextMate)
4. 'CMD + T' (to open up a new Terminal tab)
5. 'gitk --all &' (to open up the Wish version control interface for the rails application)
6. 'autotest' (to runs the tests in the rails application)
7. 'CMD + T' (to open up another new Terminal tab, ready for me to use)
If I could follow those steps with only one click, that would be amazing, so any suggestions are much appreciated (I just realised how many times-per-day I'm typing these commands).
Cheers

Thanks
Here's the new post;
http://discussions.apple.com/thread.jspa?threadID=2070033&tstart=0

E63 doesn't open programms with WLAN

hello!
my problem is, that when i want to open a programme (like facebook, ovi store...), the E63 always connects to 3G. sometimes a wirless lan is available and then i would like to connect to it, not to 3G (i only use this when i'm one the way.
is this possible on my mobilephone?
i really thank you!

If you use the "web" app, for instance (the green globe icon), hit options/settings/general/access point - always ask....

Why can't i open a pdf with adobe reader X

When am i not able to open the PDF with the Adobe Reader X, and also not able to choose it as programm for opening of the PDF. (Right click and "open program with", it's not possible to choose Reader, when i try nothing happens and it's not added to the program list)
Thanks for help.

And yes i can open by the programm itself directly, but i have no idea how to correct the file association then....

Issues opening RAW files with CS2...

I find if a bit complicated to open RAW files with Photoshop CS2 in iPhoto 08 (I'm using OS X 10.5). Currently the only way I've been able to do this is do a search for the file name in the finder, at the bottom of the Finder window, in the path, double click on the folder that the RAW files are in (user/my name/pictures/iphoto library/originals/2007/RAW files), then highlight the NEF files (the cameras a Nikon D200) I want to open, hit command/O then Photoshop CS2 opens the files in the RAW converter. If I try this from CS2 (command/O) the path goes as for as iphoto library (user/my name/pictures/iphoto library), at this point the iphoto library icon is ghosted out and can not be opened. If I drag and drop the image from iPhoto to the CS2 icon in the dock it opens as a jpg not the RAW file I need. If I try clicking my way to the folder from the left side of the finder, my name/pictures/iphoto library this is as far as I can go. There's something strange going on here. How can you go to a folder only one way and not the others? There seems to "hidden" folders now.
So... My question (finally), how can I simply open RAW files from iPhoto 08 in CS2?

In iPhoto's Advanced preferences select the checkbox under RAW Photos: "Use RAW when using external editor". That will open the Cr2 file in the raw editor. To get the edit to show in iPhoto you'll need to click on the Open Image button so the jpg version is created with the edits you made to the RAW file. Then when you save you'll need to navigate in the Save window to the Modified folder and save it into the folder representing the event that the original is in. It's not easy. I've not done much with RAW, just a few tests, so there may be an easier way to get iPhoto to recognize the edited version.
If you don't use the Open File and close iPhoto won't display the edits you made to the RAW file.
Do you Twango?
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've created an Automator workflow application (requires Tiger), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 08 libraries. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.

Wont open the programme ERROR:213:19

I have just downloaded the Dreamweaver trial and I cannot open the programme, a message comes up saying that there is a problem with the licensing and to quote ERROR: 213: 19, I have tried restarting my laptop and then trying to reopen the programme but this did not work. Can anyone help?

Hi Abbie1234,
Can you try the solution in this doc? Error "Licensing has stopped working" | Mac OS
Found another doc that should help. It is for Acrobat but should work for DW too Error 213:19 | Problem has occurred with the licensing of this product | Acrobat X and XI
Thanks,
Preran

HT2488 Find/Replace text in document with automator: any suggestions?

I'm looking to replace a number of unique html tags for a number of documents: is there any way to do this without going through the documents one-by-one, tag-by-tag? I would imagine I might be able to do something with automator, but I'm open to any other suggestions. I have some knowledge of html, but that's about it.

So I take it this is something you do regularly, not something that needs to get done once? if it were a oneshot operation it would be simpler to use TextWrangler.
For repeated use, the simplest approach is to run through the files and apply text item delimiters to each tag:
set indesignTags to {"idtag1", "idtag2", "idtag3"}
set htmlEquivs to {"htmltag1", "htmltag2", "htmltag3"}
set theFiles to choose file with prompt "Choose indesign files" with multiple selections allowed
repeat with aFile in theFiles
-- get file text
          set fileText to read aFile
-- swap tags
          repeat with i from 1 to count of indesignTags
-- swap lead tags
                    set fileTextBits to tid({input:fileText, delim:"<" & item i of indesignTags})
                    set fileText to tid({input:fileTextBits, delim:"<" & item i of htmlEquivs})
-- swap trailing tags
                    set fileTextBits to tid({input:fileText, delim:"</" & item i of indesignTags})
                    set fileText to tid({input:fileTextBits, delim:"</" & item i of htmlEquivs})
          end repeat
-- make new file path with html extension
          set oldFilePath to POSIX path of aFile
          set filePathBits to tid({input:oldFilePath, delim:"."})
          set last item of fileNameBits to "html"
          set newFilePath to tid({input:filePathBits, delim:"."})
-- save at new file path
          set fp to open for access newFilePath with write permission
write fileText to fp
close access fp
end repeat
on tid({input:input, delim:delim})
-- handler for text items
          set {oldTID, my text item delimiters} to {my text item delimiters, delim}
          if class of input is list then
                    set output to input as text
          else
                    set output to text items of input
          end if
          set my text item delimiters to oldTID
          return output
end tid
This will work if the indesign tags are unique and there is no complex syntax. It might fail if tags have overlapping names (e.g. "<bl>" and "<blue>") or if there's any irregular notation. If you need more sophisticated handling you'll have to use regular expressions. In that case, download and install the Satimage osax from this page, and use the following (similar) code:
set indesignTags to {"idtag1", "idtag2", "idtag3"}
set htmlEquivs to {"htmltag1", "htmltag2", "htmltag3"}
-- set up regular expressions change lists
set findList to {}
set changeList to {}
repeat with i from 1 to count of indesignTags
          set end of findList to "(</?)" & item i of indesignTags & "(?![[:alnum:]])"
          set end of changeList to "\\1" & item i of htmlEquivs
end repeat
set theFiles to choose file with prompt "Choose indesign files" with multiple selections allowed
repeat with aFile in theFiles
-- get file text
          set fileText to read aFile
-- swap tags - needs Satimage osax
          set fileText to change findList into changeList in fileText with regexp
-- make new file path with html extension - needs Satimage osax
          set oldFilePath to POSIX path of aFile
          set newFilePath to change "\\.[^.]+$" into ".html" in oldFilePath with regexp
-- save at new file path
          set fp to open for access newFilePath with write permission
write fileText to fp
close access fp
end repeat
Message was edited by: twtwtw - I made an error in the second regular expression. should be "\\.[^.]+$", not "\\..*$". fixed in text.

I often have to open files .cue with Text Edit. Right Click, Open with, Others, Text Edit. Is it possible to put Text Edit in the menu avoiding to use "others"?

I often have to open files .cue with Text Edit. Right Click, Open with, Others, Text Edit. Is it possible to put Text Edit in the menu avoiding to use "others"?

The easiest way is to keep Textedit in the Dock and drag the .cue file(s) to the Dock icon.
You can also create an Automator Service:
Open Automator
Select: Service
Select Service receives selected [files or folders] in [Finder]
and:
Then select one or more .cue file, right click (or Control-click) on the selection to display the contextual menu. Scroll to the bottom of the contextual menu and select Services -> (what you named the Service).

Right-Click Services with Automator

So I still have my Macbook Pro that I haven't upgraded but I did update my iMac to Mavericks, so far everything is working well except that I used to have a Batch Rename Service that I used quite often but now when I right click with my mouse the Batch Rename services I created with Automator doesn't show up. I tried recreating it but still nothing. I went back to my Mountain Lion laptop and it works just fine. Any ideas?

I too was having this problem. I did the following, and it seamed to get it going:
moved the service out of the services folder (~/Library/Services/) to an easy place to get to (Desktop).
In Automator, open an new document, and selcted iCould.
drag the service from the desktop to iCloud
opened it, from iCould
file -> convert to...
select service and give it a different name than the orignal.
save and exit.
service should now be available.
In my case, the service only runs on my mac hdd. I have not yet found how to get service to run on a connected drive as it did in Mountain Lion. I want to run the service on my netowrk drive from my Synology NAS box.
Hope this helps a little

Batch process text document with automator

Hi all
i would like to create a workflow with automator that look like that
1)open text file with textedit
2)"find and replace"
3)Save
4)Close
my workflow works if i select one textfile but i didnt manage to make it do that on more than one text at the same time which is what i would like
please help
thanks
p

Hi all
i would like to create a workflow with automator that look like that
1)open text file with textedit
2)"find and replace"
3)Save
4)Close
my workflow works if i select one textfile but i didnt manage to make it do that on more than one text at the same time which is what i would like
please help
thanks
p

Simultaneous opening of programmes with automator

Similar Messages

Maybe you are looking for