Simultaneous package downloader for pacman 3.5+ [solved]
Is there such thing? Searching hasn't found anything but often you need to the know what you're searching for
Last edited by graysky (2011-05-30 08:08:33)
pacman2aria2
it has a script called powerpill-light that does what old powerpill did, it's a little bit different though, it has no -S and uses -u to download packages.
Last edited by Dastingo (2011-05-30 04:37:01)
Similar Messages
-
Circular: can't install libusb-compat for `pacman-key --init` [SOLVED]
So like a lot of people on here have upgraded to pacman 4.
I can't run `pacman-key --init` to update the keyring:
[stuart@myhost ~]$ sudo pacman-key --init
Password:
gpg: error while loading shared libraries: libusb-0.1.so.4: cannot open shared object file: No such file or directory
chmod: cannot access `/etc/pacman.d/gnupg/trustdb.gpg': No such file or directory
gpg: error while loading shared libraries: libusb-0.1.so.4: cannot open shared object file: No such file or directory
gpg: error while loading shared libraries: libusb-0.1.so.4: cannot open shared object file: No such file or directory
==> Updating trust database...
gpg: error while loading shared libraries: libusb-0.1.so.4: cannot open shared object file: No such file or directory
And because of signature issues can't install libusb-compat:
[stuart@myhost ~]$ sudo pacman -S libusb-compat
Password:
resolving dependencies...
looking for inter-conflicts...
Targets (1): libusb-compat-0.1.3-2
Total Installed Size: 0.06 MiB
Net Upgrade Size: -0.02 MiB
Proceed with installation? [Y/n] y
(1/1) checking package integrity [######################] 100%
warning: Public keyring not found; have you run 'pacman-key --init'?
error: GPGME error: Invalid crypto engine
error: failed to commit transaction (invalid or corrupted package (PGP signature))
Errors occurred, no packages were upgraded.
Last edited by Skipper_the_eye_child (2012-01-26 19:24:00)That worked - thanks. It'd have helped had I remembered to write over pacman.conf of course! I've not done any mainentance for while, got a little rusty i'm afraid.
Last edited by Skipper_the_eye_child (2012-04-11 14:02:52) -
[Solved] Downloading package binaries without pacman
I'm trying to install Arch on my little Acer Aspire One D250. Unfortunately, the installation image comes with kernel 2.6.30, which has broken drivers for all the network hardware on that machine. So, I need to download the new 2.6.32 kernel on another computer, then install it off of a USB stick with pacman -U.
So, my question is: how do I download the package binaries for the new kernel without going through pacman? TIA.
Last edited by quantumcoffeemug (2010-02-14 01:28:01)try here http://mirrors.kernel.org/archlinux/core/os/i686/
or here http://mirrors.kernel.org/archlinux/core/os/x86_64/
You can find all the mirrors in /etc/pacman.d/mirrorlist.
Last edited by my0pic (2010-02-14 01:17:31) -
"pacman" check for new packages, but without updating database.(SOLVED
Is there a way for pacman to tell you what packages could be updated but without changing your database? The reason I ask is that doing pacman -Sy is unsupported, as it could lead to old versions of a package being incompatible with news one of another. Basically, I am wondering if pacman has a way to tell you "what would happen" if I did pacman -Sy.
Last edited by TheKing42 (2014-12-07 19:28:44)I don't understand why do you want to keep your pacman database out of date. It's not possible to install outdated packages, they are dropped from the repository when an updated version is uploaded.
Last edited by ugjka (2014-12-07 20:53:52) -
[Solved] Replacing package cache directory for pacman
Hi
I want to replace "/var/cache/pacman/pkg" by "/home/zetro/linux/arch/pkg" for caching pacman packages, so that pacman always looks and saves packages in /home/zetro/linux/arch/pkg. Can I do it by simply uncommenting
#CacheDir = /var/cache/pacman/pkg/
line in /etc/pacman.conf or is there anything else to do?
Regards
Last edited by zetrotrack000 (2014-03-18 11:38:03)I'm not sure if paccache picks the cachedir from pacman.conf, I think you may need to specify it with the '-c' switch.
Just something to remember. -
Where can I download adobe File Packager tool for Windows?
Dear all,
I need to understand the detail format of f4f files, but the only useful information I can find is the following:
http://www.adobe.com/products/httpdynamicstreaming/pdfs/httpdynamicstreaming_wp_ue.pdf
Is there more detail specification for f4f ?
Where can I download adobe File Packager tool for Windows?
It seems to me the following specification is not correct for f4f, at least the parts talking about "mdat" box
http://download.macromedia.com/f4v/video_file_format_spec_v10_1.pdf
Thanks,
XuedongAs per your question – follow this link http://www.adobe.com/products/adobe-media-server-family.html, download and install AMS Starter, then inside \tools\f4fpackager you’d find the F4F packager command-line application.
-
[SOLVED ]makepkg asking for pacman-color binary
After upgrading pacman to 4.1 I'm getting this error every time I run makepkg:
/usr/bin/makepkg -s -i
==> ERROR: Cannot find the pacman-color binary required for dependency operations.
Even if I try to use --nocolor:
/usr/bin/makepkg --nocolor -s -i
==> ERROR: Cannot find the pacman-color binary required for dependency operations.
I've tried enabling and disabling color options in both makepkg.conf and pacman.conf, and the error is still there.
Any clue on what could be going on and how to solve it?
Thank you in advance
Last edited by ethail (2013-04-01 23:01:32)echo $PACMAN
pacman-color
I guess I've forgotten to edit some file that I changed when using pacman-color-testing from the AUR.
EDIT: Indeed, I forgot to edit my .zprofile that used to export PACMAN as pacman-color. Solved now
Thank you, Allan
Last edited by ethail (2013-04-01 23:02:14) -
How to download packages (Required for 11gR2 Installation)?
Hello
I am not able to download mentioned packages (Required for 11gR2 Installation) Can you Provide link for the same?
SUNWbtool
SUNWhea
SUNWlibC
SUNWlibm
SUNWlibms
SUNWsprot
SUNWtoo
SUNWi1of
SUNWi1cs (ISO8859-1)
SUNWi15cs (ISO8859-15)
SUNWxwfnt
SUNWarc
SUNWcsl
Thanks,
SaurabhGo examine your Solaris installation DVD.
The packages are there (and should have been installed with a default setup of your OS). -
Pacinfo - a package information utility for pacman
Maybe some of you have already read this on the Arch Linux planet. I have released pacinfo 0.1, it's a package information utility for pacman with the following features:
* list all installed packages
* screenshot support (fetching from http://screenshots.debian.net/ like the Ubuntu Software Center)
* large screenshot if you click on the thumbnail
* shows installed files of a package
* shows some details of the package
* full-text search in the whole package name
More features are planned. You can find the project at Google Code: http://code.google.com/p/pacinfo/ There is also a screencast about it functionality.
I have add it to the AUR repo: https://aur.archlinux.org/packages.php?ID=46065
It's written in Mono and GTK#.
This thread should be used as a discussion thread about features and bugs.
NOTE: This is my personal project and has nothing to do with my work at Arch Linux, it's not an official Arch Linux project!Looks very cool! However, I do get an error when I try to build it from AUR. I'm using the i686 vesion of Arch, have all dependencies, and everything is up to date. Not sure if this will be info-overkill, but I'm just trying to help:
Unhandled Exception: System.TypeInitializationException: An exception was thrown by the type initializer for Mono.CSharp.Location ---> System.ExecutionEngineException: SIGILL
at System.Collections.Generic.Dictionary`2[System.String,System.Int32].Init (Int32 capacity, IEqualityComparer`1 hcp) [0x00000] in <filename unknown>:0
at System.Collections.Generic.Dictionary`2[System.String,System.Int32]..ctor () [0x00000] in <filename unknown>:0
at Mono.CSharp.Location.Reset () [0x00000] in <filename unknown>:0
at Mono.CSharp.Location..cctor () [0x00000] in <filename unknown>:0
--- End of inner exception stack trace ---
at Mono.CSharp.Driver.Main (System.String[] args) [0x00000] in <filename unknown>:0
make[1]: *** [bin/Release/pacinfo.exe] Error 1
make[1]: Leaving directory `/tmp/yaourt-tmp-beelzebud/aur-pacinfo/src/pacinfo-0.1/pacinfo'
make: *** [all-recursive] Error 1
Aborting... -
PaCPAN: tool for building Perl packages for Pacman from CPAN
http://xyne.archlinux.ca/info/pacpan
*edit*
Pacpan functionality has evolved as of version 4.0. CPAN distribution and metadata handling has improved and there are now functions which can query installed packages to determine their adherence to the packaging guidelines.
Building packages with dependency resolution etc has been move to bauerbill, which can now build CPAN packages using standard pacman options, e.g. "bauerbill -S perl-foo-bar" or "bauerbill -S Foo::Bar".
Last edited by Xyne (2010-02-01 22:00:32)Imagine going looking for a perl cpan pacman solution and finding out you wrote one ofc i had to give it a spin
Works really well but i did run into trouble when installing Spreadsheet::WriteExcel something went wrong with one of the dependencies.
REQUIREMENTS
This module requires Perl 5.005 (or later), Parse::RecDescent
and File::Temp:
Works fine as long as i removed, 'perl-' from depends=
[vociferous@avatar ~]$ pacpan Spreadsheet::WriteExcel
==> retrieving info for Spreadsheet::WriteExcel
Use of uninitialized value $module in hash element at /usr/bin/pacpan line 961, <GEN1> line 298.
Use of uninitialized value $p_dep in string eq at /usr/bin/pacpan line 789, <GEN1> line 298.
Use of uninitialized value $p_dep in hash element at /usr/bin/pacpan line 790, <GEN1> line 298.
==> FOUND: found pkg: File::Temp -> perl
==> retrieving info for OLE::Storage_Lite
==> FOUND: found pkg: Parse::RecDescent -> perl-parse-recdescent
Use of uninitialized value in concatenation (.) or string at /usr/bin/pacpan line 546, <GEN1> line 1098.
Use of uninitialized value $pkgname in concatenation (.) or string at /usr/bin/pacpan line 559, <GEN1> line 1098.
Use of uninitialized value $pkgver in concatenation (.) or string at /usr/bin/pacpan line 559, <GEN1> line 1098.
Use of uninitialized value $url in concatenation (.) or string at /usr/bin/pacpan line 559, <GEN1> line 1098.
Use of uninitialized value $name in concatenation (.) or string at /usr/bin/pacpan line 325, <GEN1> line 1098.
Use of uninitialized value $ver in concatenation (.) or string at /usr/bin/pacpan line 325, <GEN1> line 1098.
Use of uninitialized value $name in concatenation (.) or string at /usr/bin/pacpan line 340, <GEN1> line 1098.
Use of uninitialized value $name in concatenation (.) or string at /usr/bin/pacpan line 340, <GEN1> line 1098.
Use of uninitialized value $name in concatenation (.) or string at /usr/bin/pacpan line 340, <GEN1> line 1098.
Use of uninitialized value $name in concatenation (.) or string at /usr/bin/pacpan line 340, <GEN1> line 1098.
==> SUCCESS: generated build script: build_cpan
pacpan Spreadsheet::WriteExcel --get-pkgbuild
Use of uninitialized value $module in hash element at /usr/bin/pacpan line 961, <GEN1> line 298.
Use of uninitialized value $p_dep in string eq at /usr/bin/pacpan line 789, <GEN1> line 298.
Use of uninitialized value $p_dep in hash element at /usr/bin/pacpan line 790, <GEN1> line 298.
# PKGBUILD generated by pacpan
pkgname=perl-spreadsheet-writeexcel
_realname=Spreadsheet-WriteExcel
pkgver=2.25
pkgrel=1
pkgdesc="no description available"
arch=(i686 x86_64)
license=('unknown, check site')
url="http://search.cpan.org/~jmcnamara/Spreadsheet-WriteExcel-2.25/lib/Spreadsheet/WriteExcel.pm"
depends=('perl' 'perl-parse-recdescent' 'perl-' 'perl-ole-storage_lite')
options=(!emptydirs)
#provides=('Spreadsheet-WriteExcel')
provides=('spreadsheet-writeexcel')
source=(http://search.cpan.org/CPAN/authors/id/J/JM/JMCNAMARA/Spreadsheet-WriteExcel-2.25.tar.gz)
md5sums=('ad70e5b031c0af60c50a72d8b09240c9')
build() {
cd ${srcdir}/${_realname}-${pkgver}
# install module in vendor directories.
PERL_MM_USE_DEFAULT=1 perl Makefile.PL INSTALLDIRS=vendor || return 1
make || return 1
make install DESTDIR=${pkgdir} || return 1
# remove perllocal.pod and .packlist
find ${pkgdir} -name perllocal.pod -delete
find ${pkgdir} -name .packlist -delete
# END OF PACPAN PKGBUILD -
Would any of you know by any chance how to find the download for a Mac OS X scanner driver? my Canon LIDE 600F scanner normally works fine - and i've checked and in principle it should be compatible with the latest Photoshop CS6 trial i've successfully downloaded. i've checked the Apple software update and that's fine too. it's just that when i open my photoshop CS6 and go to File - import - scanner, the scanner is 'missing' - and then when i try every which way, an error flag comes up, stating there's an internal error and cites the scanner driver. it looks as though i need a scanner driver download for Mac OS X 10.6. i've googled this and can't find it .... has anyone else encountered this hitch since downloading the latest Photoshop? previously i had Photoshop CS3 - it's the CS6 version now that i'm trying to work with. You know how it is, deadline approaching and trying not to OD on coffee
The driver may be listed here:
Printer and Scanner software available for download:
http://support.apple.com/kb/HT3669?viewlocale=en_US -
Pacman seg fault(Solved but with comments on pacman-db-upgrade)
Performed an install from FTP and booted into root login.
Performed pacman -Syu and received report system up to date.
Performed downloads via pacman of twelve packages including xorg and xfce4.
Performed download of abs package.
Downloaded abs repos.
Modified abs extra vlc package and performed pacman -U install of modified package.
Pacman working well at this point.
Rebooted.
After reaching xfce4 Desktop, attemptd to install firefox.
Pacman -S firefox produced..... /usr/bin/pacman/ report(forget the exact error)
Subsequent trials with ...pacman -U .... produces seg fault.
Cannot use pacman. All other programs seem to perform correctly. Perhaps have lost DNS.
Cannot perform ...pacman -Syu --debug.....segfaults.
Last edited by lilsirecho (2011-07-19 18:19:49)Solved the difficulty but have no idea what can be done to prevent it from occuring for another user.
It seems that the db did not get upgraded when the ...pacman-db-upgrade ...command was executed. There was no statement for ..."pre 3.5 db" upgrade....while executing the command.
After re-install, the upgrade command performed correctly and pacman now performs correctly after reboots.
The question comes up as to what to do if the upgrade command does not work correctly and whether some indicator of correct response should appear in the beginners guide. Additionally, what can be done in the event that the upgrade command fails to meet the correct response.
These questions will in time be resolved by a new .iso but the present exposure is amazing in its consequences!
Perhaps the upgrade command is also a function of properly synced mirrors but the command requesting the upgrade was ...pacman -Syy... the mirror sync function!
What do we have...catch22?
The resultant segfaults make sense if the pacman sync db is not upgraded.
How is a user to know the upgrade failed? What to do about such a condition?
Marking this thread as solved ...with comments... -
Custom dowload manager for pacman in chroot env
Hello
As this is the place for pacman in general I post here. Feel free to move that thread if you feel it would have a more suitable place.
I'm willing to install Arch on my computer from the live disk of another distro (Tails, based on Debian). I follow these guidelines but an issue is risen because of Tor wich makes resolving DNS less straightforward. Thus I've tried to use the option XferCommand in /etc/pacman.conf in the following way:
XferCommand = /usr/bin/curl --socks5-hostname 127.0.0.1:9050 -C - -f %u > %o
but I just get errors.
# pacman -S arch-install-scripts
warning: database file for 'core' does not exist
warning: database file for 'extra' does not exist
warning: database file for 'community' does not exist
error: target not found: arch-install-scripts
# pacman -Syu
warning: database file for 'core' does not exist
warning: database file for 'extra' does not exist
warning: database file for 'community' does not exist
:: Synchronizing package databases...
sh: /usr/bin/curl: No such file or directory
error: failed to update core (error invoking external downloader)
sh: /usr/bin/curl: No such file or directory
error: failed to update extra (error invoking external downloader)
sh: /usr/bin/curl: No such file or directory
error: failed to update community (error invoking external downloader)
error: failed to synchronize any databases
error: failed to init transaction (error invoking external downloader)
Would you have any idea to solve this problem? Of course I've checked that /usr/bin contains curl with this line:
XferCommand = ls /usr/bin && /usr/bin/curl --socks5-hostname 127.0.0.1:9050 -C - -f %u > %o
but it seems to be very contradictory:
# pacman -Syu
warning: database file for 'core' does not exist
warning: database file for 'extra' does not exist
warning: database file for 'community' does not exist
:: Synchronizing package databases...
bsdtar curl env ex nano pacman ping vi
sh: /usr/bin/curl: No such file or directory
error: failed to update core (error invoking external downloader)
bsdtar curl env ex nano pacman ping vi
sh: /usr/bin/curl: No such file or directory
error: failed to update extra (error invoking external downloader)
bsdtar curl env ex nano pacman ping vi
sh: /usr/bin/curl: No such file or directory
error: failed to update community (error invoking external downloader)
error: failed to synchronize any databases
error: failed to init transaction (error invoking external downloader)
Last edited by Caocoa (2015-04-29 23:13:26)Here is what I've done:
ARCHI=$(uname -m)
ARCH_MINI="$HOME/tmp_arch"
mkdir "$ARCH_MINI"
cd "$ARCH_MINI"
alias curl="torsocks curl"
curl -O http://mir.archlinux.fr/~tuxce/chroot/archlinux.chroot.$ARCHI.tgz
tar zxf archlinux.chroot.$ARCHI.tgz
cp /etc/resolv.conf "$ARCH_MINI/etc/"
mount -B /proc "$ARCH_MINI/proc"
mount -B /dev "$ARCH_MINI/dev"
mount -B /sys "$ARCH_MINI/sys"
mount -B /dev/pts "$ARCH_MINI/dev/pts"
ARCH_SYS="$ARCH_MINI/mnt"
mount /dev/sda4 "$ARCH_SYS"
mkdir -p "$ARCH_SYS"/var/{cache/pacman/pkg,lib/pacman} "$ARCH_SYS"/{dev,proc,sys,run,tmp,etc,boot,root,home}
mount -B /proc "$ARCH_SYS/proc"
mount -B /dev "$ARCH_SYS/dev"
mount -B /sys "$ARCH_SYS/sys"
lsblk
mount /dev/sda2 "$ARCH_SYS"/boot
mount /dev/sda1 "$ARCH_SYS"/efi
mount /dev/sda5 "$ARCH_SYS"/home
echo 'PS1="(installation) \w \\$ "' > "$ARCH_SYS/root/.bashrc"
chroot "$ARCH_MINI" /bin/bash
The main issue is I can't use pacman:
(Arch mini) / # pacman -Syu
warning: database file for 'core' does not exist
warning: database file for 'extra' does not exist
warning: database file for 'community' does not exist
:: Synchronizing package databases...
error: failed retrieving file 'core.db' from mir.archlinux.fr : Could not resolve host: mir.archlinux.fr; Unknown error
error: failed to update core (download library error)
error: failed retrieving file 'extra.db' from mir.archlinux.fr : Could not resolve host: mir.archlinux.fr; Unknown error
error: failed to update extra (download library error)
error: failed retrieving file 'community.db' from mir.archlinux.fr : Could not resolve host: mir.archlinux.fr; Unknown error
error: failed to update community (download library error)
error: failed to synchronize any databases
error: failed to init transaction (download library error)
Even if I try to copy curl binary from the host to the chroot and pass it socks option (like in my first message) it says:
/usr/bin/curl: No such file or directory
By default, pacman can't resolve repo name:
(Arch mini) / # pacman -Syu
warning: database file for 'core' does not exist
warning: database file for 'extra' does not exist
warning: database file for 'community' does not exist
:: Synchronizing package databases...
error: failed retrieving file 'core.db' from mir.archlinux.fr : Could not resolve host: mir.archlinux.fr; Unknown error
error: failed to update core (download library error)
error: failed retrieving file 'extra.db' from mir.archlinux.fr : Could not resolve host: mir.archlinux.fr; Unknown error
error: failed to update extra (download library error)
error: failed retrieving file 'community.db' from mir.archlinux.fr : Could not resolve host: mir.archlinux.fr; Unknown error
error: failed to update community (download library error)
error: failed to synchronize any databases
error: failed to init transaction (download library error)
If I want to change the adress of the repo in mirrorlist to the resolved IP address
Server = http://91.121.141.57/$repo/os/$arch
it's doesn't work either but says:
(Arch mini) / # pacman -Syu
warning: database file for 'core' does not exist
warning: database file for 'extra' does not exist
warning: database file for 'community' does not exist
:: Synchronizing package databases...
error: failed retrieving file 'core.db' from 91.121.141.57 : couldn't connect to host
error: failed to update core (download library error)
error: failed retrieving file 'extra.db' from 91.121.141.57 : couldn't connect to host
error: failed to update extra (download library error)
error: failed retrieving file 'community.db' from 91.121.141.57 : couldn't connect to host
error: failed to update community (download library error)
error: failed to synchronize any databases
error: failed to init transaction (download library error)
Last edited by Caocoa (2015-04-30 11:15:15) -
I dont think im the only one that does a weekly "pacman -Syu", many do it more often i guess, but i cant allow that, so i do it once a week, now i dont have that many pkgs as i've been really busy and just reinstalled Arch a week or so ago, but i do had this thought before i reinstalled:
When i had my prior system, i had lots of packages, and sometimes i didnt want to update them all at the same night (yeah you guessed, dialup), so i had to "manually" see what where the ones i wanted more.
Now, here is the issue, "pacman -Syu" is a list of all the pkgs available for update with no particular order except for the abecedary, so some pkgs starting with "k" would be mixed with the KDE ones and the same for the "G" and Gnome, and all this made a lot more complicated to choose what packages to upgrade. So i was thinking, cant the output of "pacman -Syu" be categorized? as with the categories the Arch installer use?
I think an ordered list of the packages available would be a much nicer thing to see and very usufull too.
Hope you take it in consideration.
Regrets.apeiro wrote:It would be problematic to start doing partial sysupgrades. You might miss a key dependency and break packages.
Hi,
I wasnt thinking in doing partial sysupgrades, i think you didnt understood what i wanted to say (im sorry but when i read something written by me in english a couple of hours ago, i find several errors on my ways of expression, not to name grammatical and ortographical).
What i meant, was that if there is a way of ordering the "display" of the output of pacman -Syu in categories, so one can see in more detail for a pkg that might want to update if there is actually any update to do.
Instead of:
abiword-1.2-pkg.tar.gz gcc-3.4-pkg.tar.gz libbonoboui-2.3-pkg.tar.gz xfree86-4.4-pkg.tar.gz xmms-2-10.pkg.tar.gz ... [...]
It would be something like this:
Base:
gcc-3.4-pkg.tar.gz ... [...]
Office:
abiword-1.2-pkg.tar.gz ... [...]
Multimedia:
xmms-2.10.pkg.tar.gz ... [...]
X:
xfree86-4.4-pkg.tar.gz ... [...]
The numbers in the versions are random except on the ones i remembered current ones.
About missing key dependencies, i do pacman -Syu to see what are the pkgs updated, then choose NO at the do system upgrade question and then i do a pacman -S [app1] [app2] [app3].... and pacman deals with the dependencies, so i dont think we would have any problem with them... is this what you meant??
kakabaratruskia wrote:maybe, there could be an option for pacman, that when you do -Syu, you where asked if you want to install each package. (like download foo? (Y/N), download dasda?(Y/N), etc.)
I think this is a great idea, it would help a lot (i wouldnt have to do the last step in the previous paragraph )
Something like pacman -Syu --ask
Anyway, this are just thoughts!
Regards -
"Your search returned no hits."
This cannot be rightworks fine
pacman -Ss pacman
core/pacman 3.3.0-3 (base)
A library-based package manager with dependency support
core/pacman-mirrorlist 20090616-1 (base)
Arch Linux mirror list for use by pacman
extra/namcap 2.3-1
A Pacman package analyzer
extra/srcpac 0.6-1
The pacman from-source wrapper
community/aqpm 1.3.3-1
Qt wrapper around pacman's libalpm
community/pacman-contrib 3.3.0-1
Utilities for use with the pacman package manager
community/pacupdate 0.1.1-2
A simple update notifier for Arch Linux (pacman)
community/perl-cpanplus-pacman 0.3.5-1
CPANPLUS::Dist plugin and script to create Arch Linux packages of CPAN
modules
community/powerpill 16.0-12
A wrapper for pacman that speeds up package retrieval by using aria2c for
concurrent/segmented downloads.
community/shaman 1.2.0-1
Complete frontend to libalpm/pacman and ABS written in Qt4
community/xpacman 0.11-4
X pacman game (use z x / ' q keys)
community/xpacman2 1.002-2
another X pacman game
Maybe you are looking for
-
How to open a specific Calendar in Outlook
Hi, I'm struggling to find an example on other forums, or not understanding the code. I want to open a non-default calendar in Outlook to create an appointment (it's a hotmail account, which is shared with a couple of people, so that they can all see
-
REQD for Fresh BAM Install 11.1.1.3.0 -Data labels missing issue
Hi This information is relevant to anyone who is doing upgrading to 11.1.1.3.0. There are 2 options if you encounter the data labels missing on the Active Studio tab : (1) Switch to Jrockit -Edit setDomainEnv.sh in directory $MW_HOME/user_projects/do
-
My apple bluetooth mouse is not being recognized by my macbook air - and it was yesterday!
My apple bluetooth mouse was working perfectly with my macbook air until I had to change the batteries. Now it is not discoverable and I really can't operate without a mouse. I tried another logitech usb mouse and that was not discoverable either.
-
My '08 17" macbook pro motherboard replacement has issues
my mac had its motherboard replaced by the recall a couple years back and since i got it back it has been restarting on it's own, if have too much pressure on the keyboard or if the surface under (table) isn't perfectly level. ONce it restarts - it w
-
Displaying a website inside a website
Is there a way to display a website (example adobe.com) inside your Flash website? Looking for something similar to HTML inline frames <iframe> src="adobe.com" height="200" width="300" </iframe> Thanks- Ben L