Since i was updated with the solution center, i cannot print envelopes

My printer is a HP officejet 4215 operating system is windows vista 64-bit, after installing the solution center I can not print envelopes or greeting cards because the printer prints in different ways and locations

You are correct. Syncing should transfer any purchased media, including videos, from your device to your iTunes library provided your computer is authorized for the Apple ID used to make these purchases. You mentioned that you have uninstalled iTunes before, but if you didn't follow this guide exactly, uninstalling iTunes and all of its components in the order specified, it may not have been successful so you should try again: Windows XP or Windows Vista/7.

Similar Messages

HT4484 i used to have an app store and lost it and i created a new one and i can not update the iphoto app because it was updated with the old account, is there a solution for this problem?

i used to have an app store and lost it and i created a new one and i can not update the iphoto app on my macbook pro because it was updated with the old account, is there a solution for this problem?

Content and Apple IDs -
Content is forever tied to the Apple ID that bought it. Apple does not transfer content from one Apple ID to another. Apple does not merge Apple IDs. You will never be able to access your content bought with one Apple ID with a new Apple ID.

TS3297 i redeemed a $25 iTunes gift card, my account was updated with the new balance, now when I signed back in, my balance is now back down to 27 cents!? How do I get that $25 back? It worked when I redeemed it earlier today!!!!! Where is my money!!??

I redeemed a $25 itunes card successfully earlier, my balance was accurate once redeemed, then when I signed on tonight, my balance is back down to 27 cents!!?? WHY??!! Where did that money go?How do I get it back?? It was there this morning and I never bought a thing!!! HELP!!

iTunes Customer Service Contact
http://www.apple.com/support/itunes/contact.html

HT4528 My iphone 4S was updated with the new iOS & its all messed up.

When I send one of my kids a text, they both get it.
Anyone know how to fix that? Thanks, Jodi

This is being caused by using the same Apple ID for iMessage on both phones. To separate your messages, go to Settings>Messages>Send & Receive and do one of the following:
Either uncheck the email address shown under "You can be reached by iMessage at" on both phones; or
If you want to continue to receive iMessages at this email address, on one of the two phones, tap the Apple ID at the top, sign out, then sign back in using a different Apple ID.

Adding a 2nd device to the Solution Center software

I have and Officejet 6500 with the Solution Center software. How can I add another HP printer to the software? At one time they both showed up, but I had problems with the driver and when I reloaded it, the second printer was gone and hasn't come back.

Hi,
Since this printer uses a different software it cannot be added to solution center.
Although I am an HP employee, I am speaking for myself and not for HP.
--Say "Thanks" by clicking the Kudos Star in the post that helped you.
--Please mark the post that solves your problem as "Accepted Solution"

Having a problem with HP Solution Center seeing my hp6940 printer

So here's the environment, windows XP, ip address 192.168.50.2, hp 6940 at 10.9.26.100. These two networks are connected by a router. I can ping the printer, I can browse to the printer address and see the printer web pages. If I bring up HP Solution Center, version 60.0.114.000, it reports when accessing the status "hp deskjet Disconnected!" and if I check ink levels the HP 6940 Toolbox reports "The computer is unable to establish two-way communication with the device" Windows XP can print to the printer. What mechanisms are being used by the Solution Center to try to communicate with the printer?

Hello w74me ,
Welcome to the HP Forums.
I see that you are having an issue with the Solution Center.
Try running the HP Print and Scan Doctor.
If the Doctor fails, please let me know where it failed and error codes you may see.
Cheers,
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP

I recently uploaded OSX 10.6.7 and ever since then, my Boris titler in FCP does not work with all the fonts, notably Avenir. It actually crashes FCP now. It was fine with the previous version. What's up Apple?

I recently uploaded OSX 10.6.7 and ever since then, my Boris titler in FCP does not work with all the fonts, notably Avenir. It actually crashes FCP now. It was fine with the previous version. What's up Apple?

I know what your'e going through, Gary.   OSX 10.6.7 is an absolute disaster.   Since I upgraded, I've had problems in FCP, Logic, Garageband, even issue dealing with peripheral hardware like external monitors.
Before 10.6.7 my system was running fine.
I've brought this up with Apple repeatedly.   They smile and shrug.   They've been helpful resolving the issues, but none of them has been easy to solve. I have spent days, dealing back and forth with tech support, sending logs, etc., before solutions have been found.
I wish I could give you an answer to your question.   My only guess is that Apple has totally dropped the ball on this one.   In the future they should provide a disclaimer when they offer an upgrade. Something like:   "Caution: all of your software may not function after this upgrade. But go ahead, you'll feel cool that your OS is the latest thing."
As someone who has been with Apple for close to 25 years, I'm disturbed by what appears to be an increasing sloppiness in their work.   This is especially disturbing when you depend upon their system to make your living.
Good luck.
david

I updated my iPhone to iOS 7.0.5 and I lost my messages and camera app and other apps i downloaded from app store. I was having the problem of losing apps since before I updated to the latest IOS. What should i do?

I updated my iPhone to iOS 7.0.5 and I lost my messages and camera app and other apps i downloaded from app store. I was having the problem of losing apps since before I updated to the latest IOS. I have tried enable and disable restriction, connecting my phone to my laptop and sync from my computer and none of them is working. What should i do?

Often when this type of thing occurs with missing default apps it is due to a situation where you are unable to 'see' the apps. If you will go to your front display of your device go to settings>General>Reset>Reset Home Screen layout.
This reset allows for your apps that have for whatever reason been hidden in such an area as you arn't able to find them now to be returned to the area as which they were when you first had the device.
As far as the missing Apps that were purchased through the Apps Store if you will go to settings>itunes and Apps store and click where it reads about automatcally downloading apps clicking on the toggle switch AND clicking on the toggle switch which allows for cellular data to be enabled this then will effectively automatically download all apps to your device that was purchased from the App Store.
Good luck friend.

How do i uninstall iphoto? it was preinstalled on my macbook pro when I bought it used and I can only update with the previous owners password.

how do i uninstall iphoto? it was preinstalled on my macbook pro when I bought it used and I can only update with the previous owners password.

Do you have the current MacOS X version 10.10.2?
Then you can simply move iPhoto from the Applications folder to the Trash,
sign into the App Store with your own AppleID
reload the "Featured" main page of the AppStore with ⌘R,
then download iPhoto with your own AppleID.
Make a backup of your iPhoto Library, before your launch the new iPhoto the first time,
If your current system is not Yosemite, you can only buy a boxed iLife 11 version of iPhoto to install it independent of the previous owner.

HT1476 Since I have updated to the new version, iOS 7, I have noticed the battery does last long as it was in iOs 6. Some friends have the same problem May I know the reason?

Since I have updated to the new version, iOS 7, I have noticed the battery does last long as it was in iOs 6. I have already updateed to 7.0.2 the latest version. Some friends have the same problem May I know the reason?

You need to update iTunes to 11.1 on your PC

I recently updated my iTunes with the lates version but now it does not detect my iPhone 5 which it was working with the old version!!!

I recently updated my iTunes with the lates version but now it does not detect my iPhone 5 which it was working with the old version!!!

Hi, M_ghaderi.
Thank you for visiting Apple Support Communities.
If your device is not recognized by iTunes, I would recommend the steps in the article below. Start with the section labeled Verify that the Apple Mobile Device USB Driver is installed > For Windows Vista, Windows 7, and Windows 8 > Update the Apple Mobile Device Driver.
iPhone, iPad, or iPod touch not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
Cheers,
Jason H.

I updated my iPhone to the new IOS6 and my awesome Google map app was replaced with the sucky, horrible, awful Apple map app. I want my Google navigator map app back!!!!!!

I updated my iPhone to the new IOS6 and my awesome Google map app was replaced with the sucky, horrible, awful Apple map app. I want my Google navigator map app back!!!!!!

I agree. I liked the previous map app. The version 6 app is powered by tomtom, I think. No more street view. I don't care for the new overhead view when dropping a pin. Plus, the current map app doesn't have the local points or data base that the google maps app had. Too bad I can't go back to the old map app.

Pls revert with the solution. No Idea how to update VAT master.

Hi
gurus
Pls revert with the solution. No Idea how to update VAT master. Its been pending for long.
Anil

Hi,
Please clarify where you want to update?
SJ

How to add Scanjet G4050 to the Solution Center

Dear Forum,
Recovering from the 'Device XYZ lost connection to the Solution Center' (see other thread), I have one point unresolved: Getting the Scanjet G4050 back as a device in the Solution Center, where it has been working properly next to my Photosmart C410b. Some information:
- Previously, The Photosmart C410b and the Scanjet G4050 were both present and working properly in the Solution Center
- Windows 7 Ultimate
- Photosmart C410B working properly in the solution center, used install software V14.3
- PC connected wired to network
- Photosmart C410b connected wired
- Scanjet G4050 connected via USB (obviously)
- HPPSDr reports an error when performing the 'HP Twain scan' test on the G4050: "A required software component was not found or improperly installed. Reinstall the HP Photosmart software that came with the device, and try scanning again / 4,[(2, 0, 80040154},{3, 56, 0}]" (needless to say I tried this several times...)
- Front panel button from Scanjet triggers an error as well: "The HP imaging device was not found. Try the following step, try bla bla bla' / 8,[{1, 0, -2147221164}]
- Also tried the use V13 of the G4050 software, but no success either.
- Device Manager mentions the "HP Scanjet G4050" properly installed, driver date 5/24/2012, Driver version: 14.0.0.0
Questions: which modules shall be installed, which version and how can I verify that?
Any suggestions?
W.

Still searching for a solution in the various blogs but no luck.
Additional info:
- in my previous post, I mentioned a version v13, this is probably more likely V3 as the filename is 'setup_full_G4000_3.exe' (I seem to have downloaded this file in Sept 2012 and used it for my initial install when setting up this PC, where it worked OK). I apologies or any confusion.
- Scanning with the G4050 from MS Paints works OK
- with the V3 installation, I do NOT install ‘OCR Software by I.R.I.S’, ‘HP Update’ nor ‘HP Photosmart Essential 3.5’, Can I do without them?
- if I use V14.5 full featured installation, I do not see an option to select the Solution Center to be installed
- if I use V3, I do see an option to select the Solution Center to be installed
- in one post a HP employee mentioned that the more recent Win7-64 installer for the G4050 did NOT have solution center anymore. Is this correct? Should I therefore use V3?
- If I install the V3 version, it fails at installing the device driver. If I follow the suggestion offered, I install the basic feature driver V14.5 and can continue the V3 full feature installation without errors, however, no G4050 appears in the solution center
- many post hint about some component incorrectly installed or missing. Can someone advice me what to clean/remove/uninstall? I have used CCleaner to remove a lot of useless stuff.
-Others suggest Microsoft install clean up: any suggestion on how to use in this case?
- neither of the installer V3 or V14.5 offer the 'uninstall_l1/2/3/4' batch files
W.

Database table not updating with the changes

Hi friends,
                Iam having a tablecontrol where iam gettting the data from the ztable for a particular key field. When i change certain fields in the table control and when i click save, it should update the changes in the ztable.
   module save output.
   modify zslip_po1 from table x_po1_slip.
here slpno is the key field. if I change a field for a particular slpno it should update the changes for that slpno value only.
but it is not updating the changes. although iam setting the slpno field dynamically.
Please give me ideas.
thanks and regards
Murali Krishna T

Hi,
1. Have 2 Internal Tables, the first one must contain the original data(before change ) and the second one contains the update data(after changed ie. table control data).
2. loop the first table and read the data from the second table using index.
3. inside the loop, compare the work area of both the internal table.
   if both are same, then no change was made to that particular record, so no need for updation
   if both are not same, then some changes were made on that record, so need to update.
4. use modify command to update that particular record from the work area.
i think in performance wise also this logic will be helpful, since we are updating only the changed record.
since this is addon table, so i hope the no of records will also less, so no need to worry about loop.
check with this, it may work out......
thank you,
SenthilPandi C
Edited by: SenthilPandi ChandraSekaran on Feb 4, 2010 5:36 PM

Since i was updated with the solution center, i cannot print envelopes

Similar Messages

Maybe you are looking for