Since up grading software my computer will not connect to iphone5 as a hotspot. It sees it but can't connect
Ever snice I upgraded software for Iphone 5, my computer will not coonect to it as a hotspot wirelessly. Computer sees it but will not connect. Anyone else having or had this problem and waht is the correction for it.
Please update to version 24.0 when you have the chance. Please also check with another browser to see if you can reproduce the issue.
thanks
Similar Messages
-
Help! My Mac book pro is 1 year old. I just updated my software yesterday now upon starting up, the computer will not move past the start up apple screen. Any suggestions?
Thanks! I will try in the am! Appreciate the suggestion.
-
My Iphone 5 and Itunes no longer sync after I updated my IOS to 7.1 I have done multiple things to troubleshoot. Uninstalled drivers, reinstalled drivers, uninstalled Itunes, reinstalled Itunes, etc.. It will not show my Iphone in Itunes anymore and will not sync.
Hello bsae14,
I would be concerned as well if my iPhone was not recognized by iTunes. Thank you for providing all the information with the steps you took in regards to this issue. I found an article with a few more steps you can take (you can skip the steps you have already taken):
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
Thank you for using Apple Support Communities.
Best,
Sheila M. -
Trying to update to itunes 10.5, keep getting message "iTunes has an invalid signature. It will not be installed". Others are also posting a similar problem but can't find any answers.
Please can anyone help on this
-
ibooks will not open the featured page on my ipad and gives an error message that it can't connect to iTunes Store, despite the other tabs working. I have signed out and back in again I have restarted neither worked . What else can I do?
Hello Tm115,
Thanks for using Apple Support Communities.
For more information on this, take a look at:
Can't connect to the iTunes Store
http://support.apple.com/kb/TS1368
Best of luck,
Mario -
WRT54G. Computer sees network but can't connect over wireless
So I have a WRT54G router since a couple of years now. Laptop (Win7 64bit), ipod, ipad, phones can connect to it without a problem, but new computer (Win7 64bit) can't. I can connect the PC via ethernet without a problem though.
I powercycled my devices, I changed broadcasting options off and then back on, changed my security mode, tried the MAC Cloning (after doing the MAC Cloning, I lost internet connectivity even through ethernet), resetted my security settings, changed SSID, I'm broadcasting through channel 11 2.462. I also tried deleting the HomeGroup
Important fact: the network is in the list of available wireless network, but Signal Strength is No Signal and I can't connect to it.
My network adapter is ASUS 802.11n Wireless LAN Card, drivers are up to date.
I've upgraded to the latest router firmware.
I use a cable ISP.
I've been looking at everyone else's posts with similar problem but none of the suggestions fixed my problem. Anyone has an idea? I'm no techie so I may be missing something important/obvious... Thanks a lot for replies (please don't hijack!)
Here's my ipconfig/all:
Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
C:\Users\Nicholas>ipconfig/all
Windows IP Configuration
Host Name . . . . . . . . . . . . : Nicholas-PC
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No
Ethernet adapter Local Area Connection:
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Realtek PCIe GBE Family Controller
Physical Address. . . . . . . . . : 6C-62-6D-44-AB-83
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
IPv4 Address. . . . . . . . . . . : 192.168.1.105(Preferred)
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Lease Obtained. . . . . . . . . . : August-28-11 6:51:38 PM
Lease Expires . . . . . . . . . . : August-30-11 9:16:40 AM
Default Gateway . . . . . . . . . : 192.168.1.1
DHCP Server . . . . . . . . . . . : 192.168.1.1
DNS Servers . . . . . . . . . . . : 24.200.243.189
24.200.241.37
24.201.245.77
NetBIOS over Tcpip. . . . . . . . : Enabled
Wireless LAN adapter Wireless Network Connection:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : ASUS 802.11n Wireless LAN Card
Physical Address. . . . . . . . . : E0-69-95-59-3A-F7
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
Tunnel adapter isatap.{9FD47BD3-604D-4E5B-B736-40D1CBF1DFFE}:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Microsoft ISATAP Adapter
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
Tunnel adapter Teredo Tunneling Pseudo-Interface:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Teredo Tunneling Pseudo-Interface
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : YesAs the concern is with your wireless connection and you have updated the firmware of the Router so once reset and reconfigure the Router... Since you are using Cable Connection refer the link for the configuration: http://www6.nohold.net/Cisco2/ukp.aspx?pid=93&vw=1&articleid=3686
As far as the wireless is concern make the channel to 6, 9 and 11...
Under Advanced Wireless Settings change Beacon Interval to 75, Fragmentation Threshold to 2306, RTS Threshold to 2307... -
I am trying to put a backup onto my new iphone that may make more sense
The contents of the Music and Videos apps aren't included in a device's backup. If you don't have them on your computer's iTunes library then if they are iTunes purchases then you should be able to copy them back from your old iPad via File > Devices > Transfer Purchases and you can then sync them to your new iPad. If some/all of them are not iTunes purchases and you don't have them on your computer nor on your backup of your library then there are some programs listed half-way down this page which should be able to copy them back : https://discussions.apple.com/docs/DOC-3991
-
ever since I updated my iPod software my iPod will not connect to the app store and won't let me download anything. help
Hook it up to your computer and open itunes. try to download hte apps via your computer. Every time you update hte software you have to reagree to the itunes terms of service. Sometimes it's hard to get it to come up on the device, but is easier on a computer.
-
after attempting to update to latest software, my iphone 4 is stuck showing "connect to itunes" picture screen. My computer will not recognize device. I have tried restarting/restoring/hard reset/reinstalling itunes and every other suggestion listed on apple troubleshooting website. thoughts?
The next step is to try recovery mode as described here:
iOS: Unable to update or restore -
Since updating my iPhone my Macbook will not sync I believe its because I am on OSX10.5.8 can i download the new OSX software?
You will need to upgrade to Snow Leopard 10.6.8 in order to update iTunes to sync with your iPhone.
Start by checking if you can run Snow Leopard:
Requirements for OS X 10.6 'Snow Leopard'
http://support.apple.com/kb/SP575
The OS 10.6 Snow Leopard install DVD is available for $19.99 from the Apple Store:
http://store.apple.com/us/product/MC573/mac-os-x-106-snow-leopard
and in the UK:
http://store.apple.com/uk/product/MC573/mac-os-x-106-snow-leopard
When you have installed it, run Software Update to download and install the latest updates for Snow Leopard to bring it up to 10.6.8, or download the combo update from here:
http://support.apple.com/kb/DL1399
Check via Software Update whether any further updates are required, particularly to iTunes.
You should now see the App Store icon in iTunes, and you now need to set up your account:
http://support.apple.com/kb/HT4479 -
How do I either: 1) turn off comptability feature, or 2) up grade the .exe to be compatable with the iphone ios 6.0.1 software. The computer will not recognize the phone. I reinstalled itunes, but it still does not work.
What are you talking about? There is no "compatibility feature" on the iPhone, and .exe files won't run on the phone.
Please slow down and explain exactly what you're trying to do and what happens when you try. -
My computer will not start. Just the wheel spinning
My computer will not start. I get the apple with a spinning wheel.
What is happening?Take each of these steps that you haven't already tried. Stop when the problem is resolved.
Step 1
The first step in dealing with a boot failure is to secure your data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since your last backup, you can skip this step.
There are several ways to back up a Mac that is unable to boot. You need an external hard drive to hold the backup data.
a. Boot into the Recovery partition, or from a local Time Machine backup volume (option key at startup.) When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.”
b. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, boot the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
c. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
Step 2
Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to boot, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can boot now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
If you've booted from an external storage device, make sure that your internal boot volume is selected in the Startup Disk pane of System Preferences.
Step 3
Boot in safe mode. Note: If FileVault is enabled on some models, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Post for further instructions.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
When you boot in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, your boot volume is corrupt and the drive is probably malfunctioning. In that case, go to Step 5.
If you can boot and log in now, empty the Trash, and then open the Finder Info window on your boot volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then reboot as usual (i.e., not in safe mode.)
If the boot process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
Step 4
Sometimes a boot failure can be resolved by resetting the NVRAM.
Step 5
Launch Disk Utility in Recovery mode (see Step 1.) Select your startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it may produce. Look for the line "Permissions repair complete" at the end of the output. Then reboot as usual.
Step 6
Reinstall the OS. If your Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
Step 7
Repeat Step 6, but this time erase the boot volume in Disk Utility before installing. The system should automatically reboot into the Setup Assistant. Follow the prompts to transfer your data from a Time Machine or other backup.
Step 8
This step applies only to older Macs (not current models) that have a logic-board ("PRAM") battery. Both desktop and portable Macs used to have such a battery. The logic-board battery is separate from the main battery of a portable. A dead logic-board battery can cause a gray screen at boot. Typically the boot failure will be preceded by loss of the startup disk and system clock settings. See the user manual for replacement instructions. You may have to take the machine to a service provider to have the battery replaced.
Step 9
If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store to have the machine tested. If you can't get to an Apple Store, go to another authorized service provider. -
the itunes 10.7 software is needed in order for iphone5 to be connected but the mac computer will not allow us to upgrade, what im i doing wrong
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: Back up and restore your iOS device with iCloud or iTunes
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
If problem what happens or does not happen and when in the instructions? When you successfully get the iPod in recovery mode and connect to computer iTunes should say it found an iPod in recovery mode. -
I am trying to update to iTunes 10 to us my new iPad, but I can not remove a corrupted? "apple software update" program... I can get everything else off, but due to "previous version" of software update it will not continue.
I stopped in to see one of the genius at the local store who referred me to "Windows Installer 4.5 Redistributable" (I am trying to install it on a Windows XP System)
The last version on iTunes on my PC was iTunes 7.
Thanks for your help,
Julia from WoodridgeUnfortunately, this sort of trouble has gotten more complicated to deal with ever since Microsoft pulled the Windows Installer CleanUp utility from their Download Center on June 25. First we have to find a copy of the utility.
Let's try Googling. (Best not to use Bing, I think.) Look for a working download site for at least version 3.0 of the Windows Installer CleanUp utility. After downloading the utility installer file (msicuu2.exe), scan the file for malware, just in case. (I use the free version of Malwarebytes AntiMalware to do single-file scans for that.)
If the file is clean, to install the utility, doubleclick the msicuu2.exe file you've downloaded.
Now run the utility ("Start > All Programs > Windows Install Clean Up"). In the list of programs that appears in CleanUp, select any Apple Software Update entries and click "Remove".
Quit out of CleanUp, restart the PC and try installing iTunes again. Does the install go through properly now?
(If you do find a clean download site for the correct version of CleanUp, please don't tell me where it is. Without wishing to sound paranoid (although I grant it does sound paranoid), there is a non-zero chance that posting links to download locations for the utility here at Discussions leads to that download location being shut down.) -
my computer will not sync with my ipod. neither starting with the computer nor with the ipod itself
Hello, VvioletT.
Thank you for visiting Apple Support Communities.
I see you are experiencing issues syncing your iOS device. Here are a couple articles that I would recommend going through when experiencing this issue.
iOS: Troubleshooting USB-related alerts when syncing
http://support.apple.com/kb/TS5254
Resolve issues between iTunes and security software
http://support.apple.com/kb/ts3125
Cheers,
Jason H.
Maybe you are looking for
-
Hi All, I am new to patching.. I am having a Single Box installation of 11.5.10.2 in Linux Please suggest how can i start with patching.. I found that i have to apply the 11.5.10.2 maintenance pack first..? Before this anything i have to apply..? Man
-
Problem with Non Reference Single ended and Differential measurements
The following was misposted at the Real-Time DAQ category and should appear in this Multifunction DAQ category: I am doing a differential measurement and then a non referenced single ended AI measurement using the same PCI 6025E card. Most of the tim
-
I am trying to down loading Lightroom 5
Is this where you post a message? Well I made the pruchase and want to down load Lightroom 5.
-
How do I create a fade effect w/ a sample?
Hi... I'm trying to get a certain effect but have yet to stumble across a good way to get the effect. I want to make a sample repeat until fade... In other words, I want it to play the sample and then loop 3 or 4 times until it fades into nothingnes
-
I want to access my songs, but Itunes won't let me. I continue to receive the same message.