Single Logical Table Source VS Multiple Logical Table Source
When is it appropriate to use a Single Logical Table Source VS Multiple Logical Table Source.
Hi,
Single Logical Table source:A logical fact/dimension table with a single physical source/table.
Mutilple Logical Table source:A logical fact/dimension table with a multiple physical sources/tables.
mark if helpful/correct....
thanks,
prassu
Similar Messages
-
Replication of a data source from multiple logical systems
Hi experts,
In our ERP wie run many different clients with correspondong logical systems. When I'm changing a data source in ERP, then I have to replicate this datasource for each single logical system.
My question :
Is there a way to replicate a data source for all logical systems belonging to an infos source at once ?
We are on BW 3.5 SP19.
Thanks in advance
Joejust another attempt
-
Logical Difference of defining Multiple Logical level keys
Hi All,
We add logical level keys in BMM layer by right cliking the logical level column of a dimesional hierarchy, doing so defines a new logical key, i already have another logical level column defined as logical level key.
When i double click on logical level hierarchy, it has keys tab where i have two keys now.
say the two keys are: "channel desc key" and "channel id key"
My question is in one key say "channel id key" if we click edit, i am getting all the columns including channel desc column, so if i click it as key, it forms a composite key of (channel id) + (channel desc) inside "channel id key". Then what is the use of maintaining another key = "channel desc key"
Is there any logical difference of ("maintaining two keys having single column defined as key in either of them") and ("maintaining one key having two logical columns defined as keys in a single logical level key")?
Thanks in Advance.
Regards,
Sreekanth.Hey got the answer, there is a difference, if i add multiple columns as keys under a single logical level key, they both come under one key and its drill down on both the columns, i cannot select selectively out of which column of the two drill down is applicatble.
If i create two different logical keys for two columns i can selectively choose which column drill down is applicable to.
Drill Down is based on "Logical Level Key" not on Logical Level Column selected as key.
Thanks,
Sreekanth. -
Design Studio 1.3 : one large generic Data Source or multiple smaller Data Sources
Dear all,
In DS 1.3, is it still a best practice to have one large generic Data Source ? Or is having multiple smaller Data Sources a better solution ?
Minimizing the number of Data Sources remains a golden rule, but what is the best solution :
One large generic Data Source : and using setDataSource
or
Multiple smaller Data Sources : and using Load in Script and Background Processing
Many thanks for sharing your ideas,
HansIt depends on your application and how much the data is pulling in and how you want to present that to the user/consumer of the application.
At TechEd Las Vegas last year, SAP showed a 9 dashboards (3 per row) with background processing for each row. -
1) Is it posssible to have multiple main tables in a single repository?
Hi Yashovardan,
Multiple main table in a single MDM repository is not supported till the MDM 5.5 version.
But yes this is available in the latest release of MDM 7.1
Check the other advancements too in the below presentation:
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/101fdef1-7776-2b10-0ab9-8d67c1f3e1d7 (MDM 7.1)
Hope It Helped
Thanks & Regards
Simona Pinto -
Using multiple physical tables in a single logical dimension table
I have two physical tables that are related on a 1 to 1 basis based on a natural key. One of these tables is already part of my RPD file (actually, it is the W_EMPLOYEE_D from the Oracle BI Applications). The second table contains additional employee attributes from a custom table added to the data warehouse. Unfortunately, I don't seem to be able to display ANY data from this newly added custom table! I'm running on OBIEE 11.1.1.6.
Here's what I've tried to do. Lets call the original table E1 and the new one E2. E1 is part of the repository already, and has functioned perfectly for years.
- In my physical model, I have imported E2 and defined the join between E1 and E2.
- In my logical table for E1, I've mapped E2 to E1 (E2 appears as a source), set up an INNER JOIN in the joins section for E1 and added the attributes from E2 in the folder
- In the SOURCES for this logical table, I've set the logical level of the content for E2 appropriately (detail level, same as E1)
- In my presentation folder for E1, I've copied in the attributes from E2 that were included in my logical table
Consistency check runs smoothly, no warnings or errors. Note: E2 contains hundreds of rows, all of which have matching records in E1.
Now, when I create an analysis that includes only an attribute sourced from E2, I get a single row returned, with a NULL value. If I create an analysis that includes one attrribute from E1 and one from E2, I get all the valid E1 records with data showing, but with NULL for the E2 attributes. Remember, I have an inner join, which means that the query is "seeing" E2 data, it is just choosing not to show it to me! Additionally, I can grab the query from the NQQuery.log file - when I run this SQL in SQL*Developer, I get PERFECT results - both E1 and E2 attributes show up in the SQL - the query engine is generating valid SQL. The log file does not indicate there are any errors either; it does show the correct number of rows being added to cache. If I create a report that includes attributes from E1, E2 and associated fact metrics I get similar results. The reports seem to run fine, but all my E2 attributes are NULL in Answers. I've verified basics, like data types, etc. and when I "Query Related Objects" in the repository, everything looks consistent across all 3 layers and all objects. E2 is located in the same (Oracle) database and schema as E1, and there are no security constraints in effect.
I've experimented with a lot of different things without success, but I expected that the above configuration should have worked. Note that I cannot set up E2 as a new separate dimension, as it does not contain the key value used to join to the facts, nor do the facts contain the natural key that is in both E1 and E2.
Sorry for the long post - just trying to head off some of the questions you might have.
Any ideas welcomed! Many thanks!
EricHi Eric,
I would like you to re-check on the content level settings here as they are the primary causes of this kind of behavior. You could notice that the same information might have written down in the logical plan of the query too.
Also, as per your description
"In the SOURCES for this logical table, I've set the logical level of the content for E2 appropriately (detail level, same as E1)"
I would like to check on this point again, as if you had mapped E2 to E1 in the same logical source with an inner join, you would get to set the content level at E1 levels themselves but not E2 (Now, that E2 would become a part of the E1 hierarchy too). This might be the reason, the BI Server is choosing to elimiate(null) the values from E2 too (even you could see them in the sql client)
Hope this helps.
Thank you,
Dhar -
Multiple Data Sources In One Logical Table
I am new to OBIEE and I have came accross an issue. I appologize if this information is in the forum somewhere but I have searched and cannot find it.
My situation is that I would like to have one logical table that contains multiple data sources which have all the same columns. I already have session variables setup to differentiate the user's security through a row-wise variable for a specific column and a session variable for another column which determines the user's association to the data source in which they belong to. This security works well when the data sources are seperated in the Business Model and Mapping portion but the issue that arises is that the user's cannot share reports when the data sources are seperated in the BM&M.
I have dragged and dropped a table from the Physical model to the BM&M, I then dragged the second data source (with same meta data structure) over to the "Sources" folder in the first data source table in the BM&M. On the Content tab or each data source table I have defined the WHERE clause as such, where VALUEOF(NQ_SESSION."SCHOOL") session variable is my row-wise column filter and the VALUEOF(NQ_SESSION."GROUP") filter is my data source determinative:
sandbox."".SANDBOX.OBIEE_CROSS_ENROLLMENTS.HOME_SCHOOL = VALUEOF(NQ_SESSION."SCHOOL") AND sandbox."".SANDBOX.OBIEE_CROSS_ENROLLMENTS.DATA_SOURCE = VALUEOF(NQ_SESSION."GROUP")
Unfortunatley this only returns values in the BI Answers for the first drag and drop Pysical table in the BM&M layer and not the second Physical table drug into the "Sources" folder. I have also tried to create a new logical table and drag both tables into the "Sources" folder to no avail. I have experimented with the Fragmentation content on the "Content" tab of the seperate logical tables, checking the "This source should be combined with other sources at this level", which gives me an error in BI Answers that a column does not exist which really does.
What could I be missing? Advanced thanks to those who reply.
Thank you,
KyleStijn,
Thank you for the article link. That was very helpful! It seems that I had a few things off as you do need the "This source should be combined with other sources at this level." checked. In my two table source columns for DATA_SOURCE I defined a literal ('086496' and '085597' for the other) in the Column Mapping tab. I pasted the following in the Fragmentation content, checking the "This source..." box on the Content tab:
eSIS.SANDBOX4_SCHOOLS.DATA_SOURCE = '086496'
And pasted the following into the WHERE clause, checking "Select distinct values" on the Content tab:
sandbox4."".OBIEE.NWOCA_SCHOOLS.SCHOOL_CODE = VALUEOF(NQ_SESSION."SCHOOL") AND sandbox4."".OBIEE.NWOCA_SCHOOLS.DATA_SOURCE = VALUEOF(NQ_SESSION."GROUP")
This took care of my user's security, utilizing the session variables in the WHERE clause. I am now able to generate reports that only one user can access from one data source and share that same report with another user who can only see data from the other data source.
Many thanks!!! -
How to "think" use of multiple logical table sources
Hi everybody,
i'm new to OBIEE and its paradigm. I'm trying to build a prototype with multiple physical sources: ERD and a Data Mart; I need OBIEE to go to the Data Mart model at the need of aggregated info and to go to the relational model at the need of transactional info. I need to do that working with dimensions, assigning different sources to each logical level of the dimension.
My problem begins when thinking how to actually do that. Here is my question:
- Should I add the relational source in the data mart logical table source folders, mapping the same information with joins? If so, how does dimensions work from that point? (drill down)
thanks in advance!I'm a little confused
Is the problem
1 - You want to Access a table in an existing 9i database from a different 10g database
or
2 - You have a new 10g database as a copy of a 9i one, and a table called system has gone missing? -
Filter on the same logical table source on two logical tables is not working properly
Hi,
In the RPD, assume that I have a physical table named Employee_fact, created an Alias called D0 Employee Fact
In the BMM I've two logical tables called Employee_fact_Type1 and Employee_fact_Type2
Each of these logical tables has the same Logical table source - D0 Employee
But in each logical table source, I've a filter in where clause
such as, for Employee_fact_Type1 employee_type = 'XXX'
for Employee_fact_Type2 employee_type='YYY'
These two facts are present in the same BMM and each of them are connected to two dimensions
such as
Dept_type1 <- Employee_fact_type_1 -> Tenure_type1
Dept_type2 <- Employee_fact_type_2 -> Tenure_type2
In analysis, When I query the columns from Dept_type1 and Tenure_type1, the database query generated shows the condition employee_type='YYY' instead of employee_type='XXX' .
But, adding the columns from Dept_Type1, Employee_fact_type_1, Tenure_type1 it shows proper filter.
I checked the relationships, presentation layer for the sources of presentation tables and everything looks good.
Can anybody tell me what goes wrong here?did you set the content level as well?
-
Multiple 'logical joins' between a fact table and one dimension table
It appears that one cannot create multiple ‘logical joins’ between a fact table and one dimension table in OBIEE using the Oracle BI Administration Tool. For example, considering a Business Model with a dimension table TIMES and a fact table FACT containing START_TIME and END_TIME, we would like to create separate logical joins from FACT to TIMES for the START_TIMEs and END_TIMEs? Obviously, the underlying foreign keys can be created, but as far as I can tell the Oracle BI Administration Tool doesn’t support this. The workaround would be to replicate the TIMES table, but that’s ugly.
I seek an alternative approach.Try this. Create an two aliases for the TIMES dimension (Start & End) in the Physical Layer and then remove foreign key to the "Parent" Times dimension. Create the Foreign Key in the Physical Layer to the new aliases and then create the complex joins in the BMM Layer to the new aliases as well. This will allow you to present both dates within the same table in the Presentation Layer. Not the most elegant solution but it works.
-
Best way to combine multiple fact tables in single mart
Hi, quick question that I think I know the answer to, just wanted to bounce it off everyone here to make sure I'm on the right track.
I have a HR datamart that contains several different fact tables. Some of the facts are additive across time (i.e. compensation - people get paid on different days, when I look at a month I want to see the total of all pay dates within that month). The other type of fact is more "status over a set of time" - i.e. a record saying that I'm employed in job X with a salary of Y from a given start date to a given end date.
For the "status over time" type facts, if I choose January 2009 (month level) in the time dimension, what I'd really like to see is the fact records that were in place "as of" the last day of the month - i.e. all records where the start date is on or before 1/1/2009, and whose end date is on or after 1/1/2009. Note that my time dimension does go down to the day level (so you could look at a person "as of" the middle of the month, etc. if you're browsing on a day-by-day basis)
I've set up the join between the time dimension and the fact table as a complex join in the physical layer, with a clause like "DIM_DATE.DATE >= FACT.START_DATE AND DIM_DATE.DATE <= FACT.END_DATE". This seems to work perfectly at the day level - I have no problems at all finding the proper records for a person as of any given day.
However, I'm not quite sure how to proceed at the month level. My initial thought is:
a) create a new LTS for the fact table at the month level
b) in the new LTS, add the join to the time dimension
c) in the new LTS, add a where clause similar to LAST_DAY_IND = 'Y' (true for the last day of each month).
Is this the proper way to do this?
Thanks in advance!
ScottHi Scott,
I think you're on the right track but I don't think you need the last part. Let me generalize the situation to the following tables
DAILY_FACT (
DAILY_FACT_KEY NUMBER, -- PRIMARY KEY
START_DATE_KEY NUMBER, -- FOREIGN KEY TO DATE DIMENSION FOR START DATE
END_DATE_KEY NUMBER, -- FOREIGN KEY TO DATE DIMENSION FOR END DATE
DAILY_VALUE NUMBER); -- FACT MEASURE
MONTHLY_FACT(
MONTHLY_FACT_KEY NUMBER, -- PRIMARY KEY
MONTH_DATE_KEY NUMBER, -- FOREIGN KEY TO DATE DIMENSION, POPULATED WITH THE KEY TO THE LAST DAY OF THE MONTH
MONTHLY_VALUE NUMBER); -- FACT MEASURE at MONTH LEVEL. DATE_KEY is at END of MONTH
DIM_DATE(
DATE_KEY NUMBER,
DATE_VALUE DATE,
DATE_MONTH VARCHAR2(20),
DATE_YEAR NUMBER(4));
DIM_DATE_END (ALIAS OF DIM_DATE for END_DATE_KEY join)
Step 1)
Make the following three joins in the physical layer:
a. DAILY_FACT.START_DATE_KEY = DIM_DATE.DATE_KEY
b. DAILY_FACT.END_DATE_KEY = DIM_DATE_END.DATE_KEY
C. MONTHLY_FACT.DATE_KEY = DIM_DATE.DATE_KEY
Note: The MONTHLY_FACT DATE_KEY is joined to the same instance of the date dimension as the START_DATE_KEY of the DAILY_FACT table. This is because these are the dates you want to make sure are in the same month.
Step 2)
Create a business model and drag DIM_DATE, DAILY_FACT and DIM_DATE_END into it.
Step 3)
Drag the physical table MONTHLY_FACT into the logical table source of the logical table DAILY_FACT.
Step 4)
Set DAILY_VALUE and MONTHLY_VALUE to be aggregates with a "SUM" aggregation function
Step 5)
Drag all required reporting columns to the Presentation layer.
Step 6)
Create your report using the two different measures from the different fact tables.
Step 7)
Filter the report by the Month that joined to the Start Date/Monthly Date (not the one that joined to the end date).
Step 8)
You're done.
The act of combining the two facts into one logical table allows you to report on them at the same time. The strategy of joining the START_DATE_KEY and the MONTH_DATE_KEY allows you to make sure that the daily measure start date will be in the same month as the monthly fact table.
Hope that helps!
-Joe
Edited by: Joe Bertram on Jan 5, 2010 6:29 PM -
Table for conversion of logical system
HI All
please let me know the table name which will have all source system converion list.
thanks in advance.
thx
vijHi,
Can also check at transaction RSA->Tools Menu->Conversion of logical system names(Displays all Source and Target Systems).
Thanks,
Rema -
View a single table-row as multiple rows in a GridControl
Hi,
is it possible to distribute the entries of a single row of a table/RowSetInfo over multiple lines of a GridControl?
I've seen an example on the Internet (http://www2.gol.com/users/tame/swing/examples/JTableExamples4.html) which does this without database connection but it seems as if it's necessary to replace the default JTable, TableModel and UI by customized ones. As far as I've seen it's not possible to replace the JTable which is used by a GridControl? So is there any other way to do this? (A modification of the JTable-UI itself doesn't suffice as the JTable yields wrong row- and column-numbers on mousclick-events and therefore the components of the second row are not enabled properly).
Thanks in advance
null|I've seen an example on the Internet |(http://www2.gol.com/users/tame/swing/exampl|es/JTableExamples4.html) which does this |without database connection but it seems as |if it's necessary to replace the default |JTable, TableModel and UI by customized |ones.
You wont be able to replace the JTable. But you can change all the attributes on the internal table which the grid uses (see getTable() method). The datamodel for the grid is impemented by oracle.dacf.control.swing.GridDataSource. You can possibly extend this class. You can also change the Table column model and the renderers used by the Table.
|So is there any other way to do this? (A |modification of the JTable-UI itself doesn't |suffice as the JTable yields wrong row- and |column-numbers on mousclick-events and |therefore the components of the second row |are not enabled properly).
Could you expain how the mapping between cell renderer and the table (row, col) is done in the extended JTable - which class ?.
(http://www2.gol.com/users/tame/swing/exampl|es/JTableExamples4.html)
null -
Logical System is not defined in table SMOF_ERPSH!
Hi,
When i am replicating a material group to SRM system, in SMQ2, the error message appears as 'Logical System is not defined in table SMOF_ERPSH!'.
can any one please let me know why this comes up, i have checked the SMOEAC settings, its fine and the logical system entries are already present in the tabeHi,
Can you verify all your settings as per note 720819?
Also under SMOEAC transaction, site attributes for your site type 'CRM' may not have any value. Please define attributes for your SRM RFC destination. Select the correct RFC destination, then click on button 'Get Values'.After doing this, table SMOF_ERPSH should be populated correctly.
Regards,
Nikhil -
How to show multiple dynamic tables on a single screen?
right now im displaying alv for singlr attribute of dimension.
eg for dimension PRODUCT attribute PROFITCENTER im displaying in alv when user executes it.
but the requirement is that multiple attributes can be there so multiple tables is to be displayed on a single screen.
User basically wants to see data of all attributes. if there are 10 attributes hee wants to see 10 tables as every attribute has a different table.
what i have achieved is below in snapshots. only one attribute table PRODUCT im able to display. since i believe multiple headers cant be displyed in alv so even if i display multiple dynamically populated tables on a single screen then it will be fine.
i have also ADDED my code below: ZMDREPORT
this report is for SAP BPC.
*& Report ZMDREPORT
REPORT zmdreport.
TABLES /1cpmb/bfrdp3rp.
DATA: gw_datatbl TYPE tabname,
gw_datatbl1 TYPE tabname,
gw_descrptbl TYPE tabname,
gw_attribute TYPE tabname.
DATA:
BEGIN OF gw_attr,
appset_id TYPE uja_dim_attr-appset_id,
dimension TYPE uja_dim_attr-dimension,
tech_name TYPE uja_dim_attr-tech_name,
attribute_name TYPE uja_dim_attr-attribute_name,
caption TYPE uja_dim_attr-caption,
END OF gw_attr,
gt_attr LIKE TABLE OF gw_attr.
DATA: gt_slis_fcat1 TYPE slis_t_fieldcat_alv,
gw_slis_fcat1 LIKE LINE OF gt_slis_fcat1.
DATA : gt_except TYPE TABLE OF zbpcbt007,
gw_except LIKE LINE OF gt_except,
gt_except_t TYPE TABLE OF zbpcbt007,
gt_attrib TYPE TABLE OF tabname,
gw_attrib LIKE LINE OF gt_attrib.
DATA: gr_r_ref TYPE REF TO data.
DATA:BEGIN OF gw_mdr,
appset_id TYPE uj_appset_id,
dimension TYPE uj_dim_name,
reasoncd TYPE zmdreason,
refdimension TYPE uj_dim_name,
attrib TYPE uj_attr_name,
END OF gw_mdr,
gt_mdr1 LIKE TABLE OF gw_mdr,
gt_mdr2 LIKE TABLE OF gw_mdr,
gt_mdtable1 TYPE zbpctt_attr,
gt_mdtable2 TYPE zbpctt_attr,
gw_mdtable2 LIKE LINE OF gt_mdtable2,
gt_mdtable3 TYPE zbpctt_attr,
gt_mdtable4 TYPE zbpctt_attr,
gw_mdtable4 LIKE LINE OF gt_mdtable4,
BEGIN OF gw_finalattr,
dim(32) TYPE c,
END OF gw_finalattr,
gt_finalattr LIKE TABLE OF gw_finalattr,
gt_tab1 LIKE TABLE OF gw_finalattr,
gw_tab1 LIKE LINE OF gt_tab1,
gt_tab2 LIKE TABLE OF gw_finalattr,
gw_tab2 LIKE LINE OF gt_tab2.
FIELD-SYMBOLS: <gfs_tab1> TYPE STANDARD TABLE.
FIELD-SYMBOLS: <gfs_tab2> TYPE STANDARD TABLE,
<gfs_tab3> TYPE STANDARD TABLE,
<gfs_tab4> TYPE STANDARD TABLE.
FIELD-SYMBOLS:<gfs_attr> TYPE any,
<gfs_field3> TYPE any,
<gfs_field4> TYPE any.
DATA: gw_sortcond TYPE string.
FIELD-SYMBOLS: <gfs_t_final> TYPE STANDARD TABLE.
FIELD-SYMBOLS: <gfs_final> TYPE any.
FIELD-SYMBOLS: <gfs_data> TYPE any .
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-001.
PARAMETERS: p_env TYPE uja_dimension-appset_id OBLIGATORY.
PARAMETERS: p_dim TYPE uja_dimension-dimension OBLIGATORY.
SELECT-OPTIONS: s_member FOR /1cpmb/bfrdp3rp-mbr_name .
PARAMETERS: p_hir TYPE /1cpmb/bfrdp3rp-/cpmb/hir.
PARAMETERS:p_attr TYPE uj_attr_name MODIF ID m1.
SELECTION-SCREEN END OF BLOCK b1.
SELECTION-SCREEN BEGIN OF BLOCK b2 WITH FRAME TITLE text-002.
PARAMETERS: p_radio1 RADIOBUTTON GROUP g1 USER-COMMAND abc DEFAULT 'X',
p_radio2 RADIOBUTTON GROUP g1.
SELECTION-SCREEN END OF BLOCK b2.
SELECTION-SCREEN BEGIN OF BLOCK b3 WITH FRAME TITLE text-003.
PARAMETERS: p_reason TYPE zbpcbt007-reasoncd MODIF ID m1.
SELECTION-SCREEN END OF BLOCK b3.
*********************************************************************alv
DATA :gt_fcat TYPE lvc_t_fcat.
DATA: gw_ok_code TYPE sy-ucomm,
gw_okcode TYPE sy-ucomm.
DATA: go_custom_container TYPE REF TO cl_gui_custom_container,
gw_g_container TYPE scrfname VALUE 'CC1',
go_grid1 TYPE REF TO cl_gui_alv_grid.
DATA:BEGIN OF gw_table,
dimension TYPE uja_dimension-dimension,
END OF gw_table,
gt_tab LIKE TABLE OF gw_table ,
BEGIN OF gw_member,
mbr_name TYPE uj_dim_member,
END OF gw_member ,
gt_member LIKE TABLE OF gw_member,
BEGIN OF gw_hir ,
hir TYPE /1cpmb/bfrdp3rp-/cpmb/hir,
END OF gw_hir,
gt_hir LIKE TABLE OF gw_hir.
DATA:gt_slis_fcat2 TYPE slis_t_fieldcat_alv,
gw_slis_fcat2 LIKE LINE OF gt_slis_fcat2 .
DATA: lr_data TYPE REF TO data.
DATA :gt_fcat1 TYPE lvc_t_fcat,
gt_fcat2 TYPE lvc_t_fcat,
gt_fcat3 TYPE lvc_t_fcat,
gt_fcat2_t TYPE lvc_t_fcat,
gw_fcat LIKE LINE OF gt_fcat2,
gw_fcat3 LIKE LINE OF gt_fcat3.
DATA: gt_fcat3_t LIKE gt_fcat3.
DATA: gw_desc TYPE uj_desc.
DATA : gw_string TYPE string,
gw_str TYPE string.
DATA: gw_len TYPE string,
BEGIN OF gw_refdim,
dimension TYPE uja_dimension-dimension,
END OF gw_refdim,
gt_refdim LIKE TABLE OF gw_refdim,
gt_refdim_t LIKE TABLE OF gw_refdim,
BEGIN OF gw_refdata,
data_table TYPE tabname,
desc_table TYPE tabname,
END OF gw_refdata,
gt_refdata LIKE TABLE OF gw_refdata,
BEGIN OF gw_techattr,
tech_name TYPE uja_dim_attr-tech_name,
END OF gw_techattr,
gt_techattr LIKE TABLE OF gw_techattr,
gw_cond TYPE string.
DATA:gw_hircond TYPE string.
DATA: gt_dynpread TYPE TABLE OF dynpread,
gw_dynpread LIKE LINE OF gt_dynpread,
gw_dynpread2 LIKE LINE OF gt_dynpread,
gw_dim TYPE string,
gw_env TYPE string.
FIELD-SYMBOLS: <gfs_w_tab1> TYPE any,
<gfs_w_tab2> TYPE any,
<gfs_w_tab3> TYPE any,
<gfs_field> TYPE any,
<gfs_field2> TYPE any,
<gfs_field_final> TYPE any,
<gfs_s_fcat> TYPE lvc_s_fcat,
<gfs_s_fcat2> TYPE lvc_s_fcat,
<gfs_s_fcat3> TYPE lvc_s_fcat
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_dim.
REFRESH gt_dynpread.
gw_dynpread-fieldname = 'P_ENV'.
APPEND gw_dynpread TO gt_dynpread.
CALL FUNCTION 'DYNP_VALUES_READ'
EXPORTING
dyname = sy-repid
dynumb = sy-dynnr
* TRANSLATE_TO_UPPER = ' '
* REQUEST = ' '
* PERFORM_CONVERSION_EXITS = ' '
* PERFORM_INPUT_CONVERSION = ' '
* DETERMINE_LOOP_INDEX = ' '
* START_SEARCH_IN_CURRENT_SCREEN = 'X'
* start_search_in_main_screen = ' '
* START_SEARCH_IN_STACKED_SCREEN = ' '
* START_SEARCH_ON_SCR_STACKPOS = ' '
* SEARCH_OWN_SUBSCREENS_FIRST = ' '
* SEARCHPATH_OF_SUBSCREEN_AREAS = ' '
TABLES
dynpfields = gt_dynpread
EXCEPTIONS
invalid_abapworkarea = 1
invalid_dynprofield = 2
invalid_dynproname = 3
invalid_dynpronummer = 4
invalid_request = 5
no_fielddescription = 6
invalid_parameter = 7
undefind_error = 8
double_conversion = 9
stepl_not_found = 10
OTHERS = 11.
IF sy-subrc EQ 0.
READ TABLE gt_dynpread INTO gw_dynpread INDEX 1.
IF sy-subrc EQ 0.
TRY .
REFRESH gt_tab.
SELECT dimension
FROM uja_dimension CLIENT SPECIFIED
INTO TABLE gt_tab
WHERE mandt EQ sy-mandt
AND appset_id EQ gw_dynpread-fieldvalue.
IF sy-subrc EQ 0.
SORT gt_tab BY dimension.
DELETE ADJACENT DUPLICATES FROM gt_tab COMPARING dimension.
IF gt_tab IS NOT INITIAL.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST' "#EC CI_SUBRC
EXPORTING
* DDIC_STRUCTURE = ''
retfield = 'DIMENSION'
* PVALKEY = ' '
dynpprog = sy-repid
dynpnr = sy-dynnr
dynprofield = 'P_DIM'(004)
* STEPL = 0
* WINDOW_TITLE =
* VALUE = ' '
value_org = 'S'
* MULTIPLE_CHOICE = ' '
* display = ''
* CALLBACK_PROGRAM = ' '
* CALLBACK_FORM = ' '
* CALLBACK_METHOD =
* MARK_TAB =
* IMPORTING
* USER_RESET =
TABLES
value_tab = gt_tab
* FIELD_TAB =
* RETURN_TAB =
* DYNPFLD_MAPPING =
EXCEPTIONS
parameter_error = 1
no_values_found = 2
OTHERS = 3
IF sy-subrc NE 0.
ENDIF.
ENDIF.
ENDIF.
CATCH cx_root.
ENDTRY.
ENDIF.
ENDIF.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR s_member-low.
REFRESH gt_dynpread.
gw_dynpread-fieldname = 'P_ENV'.
APPEND gw_dynpread TO gt_dynpread.
gw_dynpread-fieldname = 'P_DIM'.
APPEND gw_dynpread TO gt_dynpread.
CALL FUNCTION 'DYNP_VALUES_READ'
EXPORTING
dyname = sy-repid
dynumb = sy-dynnr
* TRANSLATE_TO_UPPER = ' '
* REQUEST = ' '
* PERFORM_CONVERSION_EXITS = ' '
* PERFORM_INPUT_CONVERSION = ' '
* DETERMINE_LOOP_INDEX = ' '
* START_SEARCH_IN_CURRENT_SCREEN = 'X'
* start_search_in_main_screen = ' '
* START_SEARCH_IN_STACKED_SCREEN = ' '
* START_SEARCH_ON_SCR_STACKPOS = ' '
* SEARCH_OWN_SUBSCREENS_FIRST = ' '
* SEARCHPATH_OF_SUBSCREEN_AREAS = ' '
TABLES
dynpfields = gt_dynpread
EXCEPTIONS
invalid_abapworkarea = 1
invalid_dynprofield = 2
invalid_dynproname = 3
invalid_dynpronummer = 4
invalid_request = 5
no_fielddescription = 6
invalid_parameter = 7
undefind_error = 8
double_conversion = 9
stepl_not_found = 10
OTHERS = 11.
IF sy-subrc EQ 0.
SORT gt_dynpread BY fieldname.
DELETE ADJACENT DUPLICATES FROM gt_dynpread COMPARING fieldname.
IF gt_dynpread IS NOT INITIAL.
LOOP AT gt_dynpread INTO gw_dynpread.
IF gw_dynpread-fieldname EQ 'P_ENV'.
gw_env = gw_dynpread-fieldvalue.
ELSEIF gw_dynpread-fieldname EQ 'P_DIM'.
gw_dim = gw_dynpread-fieldvalue.
ENDIF.
ENDLOOP.
IF sy-subrc EQ 0.
CLEAR: gw_datatbl1, gt_member.
SELECT SINGLE data_table
INTO (gw_datatbl1)
FROM uja_dimension CLIENT SPECIFIED
WHERE mandt EQ sy-mandt
AND appset_id EQ gw_env
AND dimension EQ gw_dim.
IF sy-subrc EQ 0.
TRY .
REFRESH gt_member.
SELECT mbr_name
INTO TABLE gt_member
FROM (gw_datatbl1) CLIENT SPECIFIED
WHERE mandt EQ sy-mandt .
IF sy-subrc EQ 0.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
EXPORTING
* DDIC_STRUCTURE = ' '
retfield = 'MBR_NAME'
* PVALKEY = ' '
dynpprog = sy-repid
dynpnr = sy-dynnr
dynprofield = 'S_MEMBER'
* STEPL = 0
* WINDOW_TITLE =
* VALUE = ' '
value_org = 'S'
* MULTIPLE_CHOICE = ' '
* DISPLAY = ' '
callback_program = sy-repid
callback_form = 'F4CALLBACK'
* CALLBACK_METHOD =
* MARK_TAB =
* IMPORTING
* USER_RESET =
TABLES
value_tab = gt_member
* FIELD_TAB =
* RETURN_TAB =
* DYNPFLD_MAPPING =
EXCEPTIONS
parameter_error = 1
no_values_found = 2
OTHERS = 3
IF sy-subrc <> 0.
* Implement suitable error handling here
ENDIF.
ENDIF.
CATCH cx_root.
ENDTRY.
ENDIF.
ENDIF.
ENDIF.
ENDIF.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR s_member-high.
REFRESH gt_dynpread.
gw_dynpread-fieldname = 'P_ENV'.
APPEND gw_dynpread TO gt_dynpread.
gw_dynpread-fieldname = 'P_DIM'.
APPEND gw_dynpread TO gt_dynpread.
CALL FUNCTION 'DYNP_VALUES_READ'
EXPORTING
dyname = sy-repid
dynumb = sy-dynnr
* TRANSLATE_TO_UPPER = ' '
* REQUEST = ' '
* PERFORM_CONVERSION_EXITS = ' '
* PERFORM_INPUT_CONVERSION = ' '
* DETERMINE_LOOP_INDEX = ' '
* START_SEARCH_IN_CURRENT_SCREEN = 'X'
* start_search_in_main_screen = ' '
* START_SEARCH_IN_STACKED_SCREEN = ' '
* START_SEARCH_ON_SCR_STACKPOS = ' '
* SEARCH_OWN_SUBSCREENS_FIRST = ' '
* SEARCHPATH_OF_SUBSCREEN_AREAS = ' '
TABLES
dynpfields = gt_dynpread
EXCEPTIONS
invalid_abapworkarea = 1
invalid_dynprofield = 2
invalid_dynproname = 3
invalid_dynpronummer = 4
invalid_request = 5
no_fielddescription = 6
invalid_parameter = 7
undefind_error = 8
double_conversion = 9
stepl_not_found = 10
OTHERS = 11.
IF sy-subrc EQ 0.
SORT gt_dynpread BY fieldname.
DELETE ADJACENT DUPLICATES FROM gt_dynpread COMPARING fieldname.
IF gt_dynpread IS NOT INITIAL.
LOOP AT gt_dynpread INTO gw_dynpread.
IF gw_dynpread-fieldname EQ 'P_ENV'.
gw_env = gw_dynpread-fieldvalue.
ELSEIF gw_dynpread-fieldname EQ 'P_DIM'.
gw_dim = gw_dynpread-fieldvalue.
ENDIF.
ENDLOOP.
IF sy-subrc EQ 0.
CLEAR: gw_datatbl1.
SELECT SINGLE data_table
INTO (gw_datatbl1)
FROM uja_dimension CLIENT SPECIFIED
WHERE mandt EQ sy-mandt
AND appset_id EQ gw_env
AND dimension EQ gw_dim.
IF sy-subrc EQ 0.
TRY .
REFRESH gt_member.
SELECT mbr_name
INTO TABLE gt_member
FROM (gw_datatbl1) CLIENT SPECIFIED
WHERE mandt EQ sy-mandt.
IF sy-subrc EQ 0.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
EXPORTING
* DDIC_STRUCTURE = ' '
retfield = 'MBR_NAME'
* PVALKEY = ' '
dynpprog = sy-repid
dynpnr = sy-dynnr
dynprofield = 'S_MEMBER'
* STEPL = 0
* WINDOW_TITLE =
* VALUE = ' '
value_org = 'S'
* MULTIPLE_CHOICE = ' '
* DISPLAY = ' '
callback_program = sy-repid
callback_form = 'F4CALLBACK'
* CALLBACK_METHOD =
* MARK_TAB =
* IMPORTING
* USER_RESET =
TABLES
value_tab = gt_member
* FIELD_TAB =
* RETURN_TAB =
* DYNPFLD_MAPPING =
EXCEPTIONS
parameter_error = 1
no_values_found = 2
OTHERS = 3
IF sy-subrc <> 0.
* Implement suitable error handling here
ENDIF.
ENDIF.
CATCH cx_root.
ENDTRY.
ENDIF.
ENDIF.
ENDIF.
ENDIF.
*& Form F4CALLBACK
* text
* -->RECORD_TAB text
* -->SHLP text
* -->CALLCONTROL text
FORM f4callback TABLES record_tab STRUCTURE seahlpres
CHANGING shlp TYPE shlp_descr
callcontrol TYPE ddshf4ctrl.
callcontrol-no_maxdisp = ''.
ENDFORM. "F4CALLBACK
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_hir.
REFRESH gt_dynpread.
CLEAR gw_dynpread.
gw_dynpread-fieldname = 'P_ENV'.
APPEND gw_dynpread TO gt_dynpread.
gw_dynpread-fieldname = 'P_DIM'.
APPEND gw_dynpread TO gt_dynpread.
CALL FUNCTION 'DYNP_VALUES_READ'
EXPORTING
dyname = sy-repid
dynumb = sy-dynnr
* TRANSLATE_TO_UPPER = ' '
* REQUEST = ' '
* PERFORM_CONVERSION_EXITS = ' '
* PERFORM_INPUT_CONVERSION = ' '
* DETERMINE_LOOP_INDEX = ' '
* START_SEARCH_IN_CURRENT_SCREEN = 'X'
* start_search_in_main_screen = ' '
* START_SEARCH_IN_STACKED_SCREEN = ' '
* START_SEARCH_ON_SCR_STACKPOS = ' '
* SEARCH_OWN_SUBSCREENS_FIRST = ' '
* SEARCHPATH_OF_SUBSCREEN_AREAS = ' '
TABLES
dynpfields = gt_dynpread
EXCEPTIONS
invalid_abapworkarea = 1
invalid_dynprofield = 2
invalid_dynproname = 3
invalid_dynpronummer = 4
invalid_request = 5
no_fielddescription = 6
invalid_parameter = 7
undefind_error = 8
double_conversion = 9
stepl_not_found = 10
OTHERS = 11.
IF sy-subrc EQ 0.
SORT gt_dynpread BY fieldname.
DELETE ADJACENT DUPLICATES FROM gt_dynpread COMPARING fieldname.
LOOP AT gt_dynpread INTO gw_dynpread.
IF gw_dynpread-fieldname EQ 'P_ENV'.
gw_env = gw_dynpread-fieldvalue.
ELSEIF gw_dynpread-fieldname EQ 'P_DIM'.
gw_dim = gw_dynpread-fieldvalue.
ENDIF.
ENDLOOP.
IF sy-subrc EQ 0.
CLEAR: gw_datatbl1.
SELECT SINGLE data_table
INTO (gw_datatbl1)
FROM uja_dimension CLIENT SPECIFIED
WHERE mandt EQ sy-mandt
AND appset_id EQ gw_env
AND dimension EQ gw_dim.
IF sy-subrc EQ 0.
REFRESH gt_member.
TRY .
SELECT /cpmb/hir
INTO TABLE gt_hir
FROM (gw_datatbl1) CLIENT SPECIFIED
WHERE mandt EQ sy-mandt.
IF sy-subrc EQ 0.
SORT gt_hir BY hir.
DELETE ADJACENT DUPLICATES FROM gt_hir COMPARING hir.
IF gt_hir IS NOT INITIAL.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
EXPORTING
* DDIC_STRUCTURE = ' '
retfield = '/CPMB/HIR'
* PVALKEY = ' '
dynpprog = sy-repid
dynpnr = sy-dynnr
dynprofield = 'P_HIR'
* STEPL = 0
* WINDOW_TITLE =
* VALUE = ' '
value_org = 'S'
* MULTIPLE_CHOICE = ' '
* DISPLAY = ' '
* CALLBACK_PROGRAM = ' '
* CALLBACK_FORM = ' '
* CALLBACK_METHOD =
* MARK_TAB =
* IMPORTING
* USER_RESET =
TABLES
value_tab = gt_hir
* FIELD_TAB =
* RETURN_TAB =
* DYNPFLD_MAPPING =
EXCEPTIONS
parameter_error = 1
no_values_found = 2
OTHERS = 3
IF sy-subrc <> 0.
* Implement suitable error handling here
ENDIF.
ENDIF.
ENDIF.
CATCH cx_root.
ENDTRY.
ENDIF.
ENDIF.
ENDIF.
* CLASS lcl_main DEFINITION
CLASS lcl_main DEFINITION.
PUBLIC SECTION.
CLASS-METHODS:
create_alv1,
create_alv2,
create_alv3,
create_fieldcatalog,
create_dynamicalv,
merge_tables,
show_alv1
ENDCLASS. "lcl_main DEFINITION
* CLASS lcl_main IMPLEMENTATION
CLASS lcl_main IMPLEMENTATION.
METHOD create_fieldcatalog.
CALL FUNCTION 'LVC_FIELDCATALOG_MERGE' "#EC CI_SUBRC
EXPORTING
i_structure_name = gw_datatbl
CHANGING
ct_fieldcat = gt_fcat1
EXCEPTIONS
inconsistent_interface = 1
program_error = 2
OTHERS = 3.
IF sy-subrc <> 0.
* Implement suitable error handling here
ENDIF.
CALL FUNCTION 'LVC_FIELDCATALOG_MERGE' "#EC CI_SUBRC
EXPORTING
i_structure_name = gw_descrptbl
CHANGING
ct_fieldcat = gt_fcat2
EXCEPTIONS
inconsistent_interface = 1
program_error = 2
OTHERS = 3.
IF sy-subrc <> 0.
* Implement suitable error handling here
ENDIF.
ENDMETHOD. "create_fieldcatalog
METHOD create_dynamicalv.
* DATA: lr_data TYPE REF TO data.
CLEAR lr_data.
CALL METHOD cl_alv_table_create=>create_dynamic_table
"#EC CI_SUBRC
EXPORTING
* i_style_table =
it_fieldcatalog = gt_fcat2
* i_length_in_byte =
IMPORTING
ep_table = lr_data
* e_style_fname =
EXCEPTIONS
generate_subpool_dir_full = 1
OTHERS = 2.
IF sy-subrc <> 0.
*MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDMETHOD. "create_dynamicalv
METHOD merge_tables.
SORT gt_fcat2 BY col_pos.
ASSIGN lr_data->* TO <gfs_t_final>.
LOOP AT <gfs_tab1> ASSIGNING <gfs_w_tab1>.
APPEND INITIAL LINE TO <gfs_t_final> ASSIGNING <gfs_final>.
LOOP AT gt_fcat2 ASSIGNING <gfs_s_fcat>. "#EC CI_NESTED
ASSIGN COMPONENT <gfs_s_fcat>-fieldname OF STRUCTURE
<gfs_w_tab1> TO <gfs_field>.
IF sy-subrc EQ 0 AND <gfs_field> IS ASSIGNED.
ASSIGN COMPONENT <gfs_s_fcat>-fieldname OF STRUCTURE
<gfs_final> TO <gfs_field_final>.
IF sy-subrc EQ 0 AND <gfs_field_final> IS ASSIGNED.
<gfs_field_final> = <gfs_field>.
ENDIF.
*** Creating dynamic where clause for the key fields
IF <gfs_s_fcat>-key = 'X'.
READ TABLE gt_fcat2_t ASSIGNING <gfs_s_fcat2>
WITH KEY
key = abap_true
fieldname = <gfs_s_fcat>-fieldname.
IF sy-subrc EQ 0.
IF gw_string IS INITIAL.
*Putting value into quotes
CONCATENATE `'` <gfs_field> `'` INTO gw_str.
*Concatenating first field into string
CONCATENATE <gfs_s_fcat>-fieldname '=' gw_str
INTO gw_string SEPARATED BY space.
CLEAR gw_str.
ELSE.
*Concatenating rest all key fields
CONCATENATE `'` <gfs_field> `'` INTO gw_str.
CONCATENATE gw_string 'AND' <gfs_s_fcat>-fieldname
'=' gw_str INTO gw_string SEPARATED BY space.
CLEAR gw_str.
ENDIF.
ENDIF.
*** End of Creation
ENDIF.
ENDIF.
ENDLOOP.
IF NOT gw_string IS INITIAL.
*Concatenating sy-langu (-> always present)
CONCATENATE gw_string 'AND LANGU = SY-LANGU'
INTO gw_string SEPARATED BY space.
ENDIF.
*** Filling Description field based on dynamically created where clause
LOOP AT <gfs_tab2> ASSIGNING <gfs_w_tab2> WHERE (gw_string).
"#EC CI_NESTED
ASSIGN COMPONENT 'TXTLG' OF STRUCTURE <gfs_w_tab2>
TO <gfs_field>.
IF sy-subrc EQ 0 AND <gfs_field> IS ASSIGNED.
ASSIGN COMPONENT 'TXTLG' OF STRUCTURE <gfs_final>
TO <gfs_field_final>.
IF sy-subrc EQ 0 AND <gfs_field_final> IS ASSIGNED.
<gfs_field_final> = <gfs_field>.
ENDIF.
ENDIF.
ENDLOOP.
CLEAR gw_string.
ENDLOOP.
ENDMETHOD. "merge_tables
METHOD create_alv3.
CREATE DATA gr_r_ref TYPE TABLE OF (gw_datatbl).
ASSIGN gr_r_ref->* TO <gfs_tab1>.
SELECT *
INTO TABLE <gfs_tab1>
FROM (gw_datatbl) CLIENT SPECIFIED
WHERE mandt EQ sy-mandt
AND mbr_name IN s_member
AND /cpmb/calc EQ 'N'.
IF sy-subrc EQ 0.
IF p_hir IS NOT INITIAL.
CLEAR gw_hircond.
CONCATENATE '/CPMB/HIR' 'NE' 'P_HIR' INTO gw_hircond
SEPARATED BY space.
DELETE <gfs_tab1> WHERE (gw_hircond).
ENDIF.
CLEAR: gr_r_ref.
CREATE DATA gr_r_ref TYPE TABLE OF (gw_descrptbl).
ASSIGN gr_r_ref->* TO <gfs_tab2>.
SELECT *
FROM (gw_descrptbl) CLIENT SPECIFIED
INTO TABLE <gfs_tab2>
WHERE mandt EQ sy-mandt
AND langu EQ sy-langu.
IF sy-subrc EQ 0.
READ TABLE gt_refdata INTO gw_refdata INDEX 1.
IF sy-subrc EQ 0.
CLEAR gr_r_ref.
CREATE DATA gr_r_ref TYPE TABLE OF (gw_refdata-data_table).
ASSIGN gr_r_ref->* TO <gfs_tab3>.
SELECT *
INTO TABLE <gfs_tab3>
FROM (gw_refdata-data_table) CLIENT SPECIFIED
WHERE mandt EQ sy-mandt
AND /cpmb/calc EQ 'N'.
IF sy-subrc EQ 0.
CLEAR gr_r_ref.
CREATE DATA gr_r_ref TYPE TABLE OF (gw_refdata-desc_table).
ASSIGN gr_r_ref->* TO <gfs_tab4>.
SELECT *
INTO TABLE <gfs_tab4>
FROM (gw_refdata-desc_table) CLIENT SPECIFIED
WHERE mandt EQ sy-mandt
AND langu EQ sy-langu.
lcl_main=>create_fieldcatalog( ).
gt_fcat2_t[] = gt_fcat2[].
DELETE gt_fcat2 WHERE fieldname NE 'TXTLG'.
APPEND LINES OF gt_fcat1 TO gt_fcat2.
gw_len = lines( gt_fcat2 ).
gw_len = gw_len + 1.
gw_fcat-fieldname = 'TXTLG1'.
gw_fcat-reptext = 'Attribute Description'.
gw_fcat-col_pos = gw_len.
gw_fcat-outputlen = 60.
APPEND gw_fcat TO gt_fcat2.
SORT gt_fcat2 BY fieldname.
READ TABLE gt_techattr INTO gw_techattr INDEX 1.
LOOP AT gt_fcat2 INTO gw_fcat.
READ TABLE gt_attr INTO gw_attr
WITH KEY tech_name = gw_fcat-fieldname.
IF sy-subrc EQ 0.
gw_fcat-reptext = gw_attr-caption.
ENDIF.
IF gw_fcat-fieldname = 'TXTLG'.
gw_fcat-outputlen = 60.
ENDIF.
MODIFY gt_fcat2 FROM gw_fcat TRANSPORTING
outputlen reptext .
IF gw_fcat-fieldname NE 'MBR_NAME'
AND gw_fcat-fieldname NE 'TXTLG'
AND gw_fcat-fieldname NE 'TXTLG1'
AND gw_fcat-fieldname NE gw_techattr-tech_name."gw_attrib.
gw_fcat-no_out = 'X'.
MODIFY gt_fcat2 FROM gw_fcat TRANSPORTING no_out.
ENDIF.
ENDLOOP.
lcl_main=>create_dynamicalv( ).
lcl_main=>merge_tables( ).
CLEAR gw_cond.
READ TABLE gt_techattr INTO gw_techattr INDEX 1.
* CONCATENATE 'MBR_NAME =' '<Gfs_field>' INTO Gw_cond
* SEPARATED BY space.
TRANSLATE gw_techattr-tech_name TO UPPER CASE.
CONCATENATE `'` gw_techattr-tech_name `'`
'=' '<Gfs_field>' INTO gw_cond
SEPARATED BY space.
CHECK NOT <gfs_t_final> IS INITIAL.
SORT <gfs_t_final> BY (gw_techattr-tech_name).
LOOP AT <gfs_tab3> ASSIGNING <gfs_w_tab3>.
ASSIGN COMPONENT 'MBR_NAME' OF STRUCTURE <gfs_w_tab3>
TO <gfs_field>.
IF sy-subrc EQ 0 AND <gfs_field> IS ASSIGNED.
DELETE <gfs_t_final> WHERE (gw_cond).
ENDIF.
IF <gfs_t_final> IS INITIAL.
EXIT.
ENDIF.
ENDLOOP.
*adding attribute description
DATA gw_cond1 TYPE string.
DATA gw_cond2 TYPE string.
CLEAR gw_cond1.
CONCATENATE `'` gw_techattr-tech_name `'` 'eq' '<gfs_field>'
INTO gw_cond1 SEPARATED BY space.
CLEAR gw_cond2.
CONCATENATE 'TXTLG1' 'eq' 'SPACE'
INTO gw_cond2 SEPARATED BY space.
CLEAR gw_cond.
CONCATENATE 'TXTLG' 'NE' 'SPACE' INTO gw_cond SEPARATED BY
space.
gw_sortcond = 'TXTLG'.
SORT <gfs_tab4> BY (gw_sortcond).
LOOP AT <gfs_t_final> ASSIGNING <gfs_final> WHERE
(gw_cond2).
ASSIGN COMPONENT gw_techattr-tech_name OF STRUCTURE
<gfs_final> TO <gfs_field>.
IF sy-subrc EQ 0 AND <gfs_field> IS ASSIGNED.
ASSIGN COMPONENT 'TXTLG1' OF STRUCTURE
<gfs_final> TO <gfs_field4>.
IF sy-subrc EQ 0 AND <gfs_field4> IS ASSIGNED.
LOOP AT <gfs_tab4> ASSIGNING <gfs_attr>
WHERE (gw_cond).
ASSIGN COMPONENT 2 OF STRUCTURE <gfs_attr> TO
<gfs_field2>.
IF sy-subrc EQ 0 AND <gfs_field2> IS ASSIGNED.
ASSIGN COMPONENT 5 OF STRUCTURE <gfs_attr>
TO <gfs_field3>.
IF sy-subrc EQ 0 AND <gfs_field3> IS ASSIGNED.
IF <gfs_field> EQ <gfs_field2>.
<gfs_field4> = <gfs_field3>.
MODIFY <gfs_t_final> FROM <gfs_final>
TRANSPORTING ('TXTLG1') WHERE (gw_cond1).
EXIT.
ENDIF.
ENDIF.
ENDIF.
ENDLOOP.
ENDIF.
ENDIF.
ENDLOOP.
* LOOP AT <gfs_tab4> ASSIGNING <gfs_attr> WHERE (gw_cond) .
* ASSIGN COMPONENT 2 OF STRUCTURE <gfs_attr> TO
* <gfs_field2>.
* IF sy-subrc EQ 0 AND <gfs_field2> IS ASSIGNED.
* ASSIGN COMPONENT 5 OF STRUCTURE <gfs_attr> TO
* <gfs_field3>.
* IF sy-subrc EQ 0 AND <gfs_field3> IS ASSIGNED.
* LOOP AT <gfs_t_final> ASSIGNING <gfs_final>
* WHERE (gw_cond2).
* ASSIGN COMPONENT gw_techattr-tech_name OF STRUCTURE
* <gfs_final> TO <gfs_field>.
* IF sy-subrc EQ 0 AND <gfs_field> IS ASSIGNED.
* ASSIGN COMPONENT 'TXTLG1' OF STRUCTURE <gfs_final>
* TO <gfs_field4>.
* IF sy-subrc EQ 0 AND <gfs_field4> IS ASSIGNED.
* IF <gfs_field> EQ <gfs_field2>.
* <gfs_field4> = <gfs_field3>.
* MODIFY <gfs_t_final> FROM <gfs_final>
* TRANSPORTING ('TXTLG1') WHERE (gw_cond1).
* EXIT.
* ENDIF.
* ENDIF.
* ENDIF.
* ENDLOOP.
* ENDIF.
* ENDIF.
* ENDLOOP.
IF <gfs_t_final> IS NOT INITIAL.
CALL SCREEN 9000.
ENDIF.
ENDIF.
ENDIF.
ENDIF.
ENDIF.
ENDMETHOD. "create_alv3
METHOD create_alv2.
READ TABLE gt_techattr INTO gw_techattr INDEX 1.
CONCATENATE gw_techattr-tech_name 'EQ' 'space' INTO gw_cond
SEPARATED
BY
space.
CREATE DATA gr_r_ref TYPE TABLE OF (gw_datatbl).
ASSIGN gr_r_ref->* TO <gfs_tab1>.
SELECT *
INTO TABLE <gfs_tab1>
FROM (gw_datatbl) CLIENT SPECIFIED
WHERE mandt EQ sy-mandt
AND mbr_name IN s_member
AND /cpmb/calc EQ 'N'
AND (gw_cond).
IF sy-subrc EQ 0.
IF p_hir IS NOT INITIAL.
CLEAR gw_hircond.
CONCATENATE '/CPMB/HIR' 'NE' 'P_HIR' INTO gw_hircond
SEPARATED BY space.
DELETE <gfs_tab1> WHERE (gw_hircond).
ENDIF.
CLEAR: gr_r_ref.
CREATE DATA gr_r_ref TYPE TABLE OF (gw_descrptbl).
ASSIGN gr_r_ref->* TO <gfs_tab2>.
SELECT *
FROM (gw_descrptbl) CLIENT SPECIFIED
INTO TABLE <gfs_tab2>
WHERE mandt EQ sy-mandt
AND langu EQ sy-langu.
IF sy-subrc EQ 0.
lcl_main=>create_fieldcatalog( ).
gt_fcat2_t[] = gt_fcat2[].
DELETE gt_fcat2 WHERE fieldname NE 'TXTLG'.
APPEND LINES OF gt_fcat1 TO gt_fcat2.
SORT gt_fcat2 BY fieldname.
LOOP AT gt_fcat2 INTO gw_fcat.
READ TABLE gt_attr INTO gw_attr WITH KEY
tech_name = gw_fcat-fieldname.
IF sy-subrc EQ 0.
gw_fcat-reptext = gw_attr-caption.
ENDIF.
IF gw_fcat-fieldname = 'TXTLG'.
gw_fcat-outputlen = 60.
ENDIF.
MODIFY gt_fcat2 FROM gw_fcat TRANSPORTING outputlen reptext.
* READ TABLE gt_attrib INTO gw_attrib INDEX 1.
* IF sy-subrc EQ 0.
IF gw_fcat-fieldname NE 'MBR_NAME'
AND gw_fcat-fieldname NE 'TXTLG'
AND gw_fcat-fieldname NE gw_techattr-tech_name."gw_attrib.
gw_fcat-no_out = 'X'.
MODIFY gt_fcat2 FROM gw_fcat TRANSPORTING no_out.
ENDIF.
* ENDIF.
ENDLOOP.
lcl_main=>create_dynamicalv( ).
lcl_main=>merge_tables( ).
CHECK NOT <gfs_t_final> IS INITIAL.
SORT <gfs_t_final> BY ('MBR_NAME').
CALL SCREEN 9000.
ENDIF.
ENDIF.
ENDMETHOD. "create_alv2
METHOD create_alv1.
CREATE DATA gr_r_ref TYPE TABLE OF (gw_datatbl).
ASSIGN gr_r_ref->* TO <gfs_tab1>.
SELECT *
FROM (gw_datatbl) CLIENT SPECIFIED
INTO TABLE <gfs_tab1>
WHERE mandt EQ sy-mandt
AND mbr_name IN s_member.
IF sy-subrc EQ 0.
IF p_hir IS NOT INITIAL.
CLEAR gw_hircond.
CONCATENATE '/CPMB/HIR' 'NE' 'P_HIR'
INTO gw_hircond SEPARATED BY
space.
DELETE <gfs_tab1> WHERE (gw_hircond).
ENDIF.
CLEAR: gr_r_ref.
CREATE DATA gr_r_ref TYPE TABLE OF (gw_descrptbl).
ASSIGN gr_r_ref->* TO <gfs_tab2>.
SELECT *
FROM (gw_descrptbl) CLIENT SPECIFIED
INTO TABLE <gfs_tab2>
WHERE mandt EQ sy-mandt
AND langu EQ sy-langu.
IF sy-subrc EQ 0.
lcl_main=>create_fieldcatalog( ).
SORT gt_fcat2 BY col_pos fieldname.
gt_fcat2_t[] = gt_fcat2[].
DELETE gt_fcat2 WHERE fieldname NE 'TXTLG'.
APPEND LINES OF gt_fcat1 TO gt_fcat2.
SORT gt_fcat2 BY fieldname.
SORT gt_attr BY tech_name.
LOOP AT gt_fcat2 INTO gw_fcat .
IF gw_fcat-reptext IS INITIAL.
READ TABLE gt_attr INTO gw_attr
WITH KEY tech_name = gw_fcat-fieldname BINARY SEARCH.
IF sy-subrc EQ 0.
gw_fcat-reptext = gw_attr-caption.
ELSE.
gw_fcat-reptext = gw_fcat-fieldname.
ENDIF.
ENDIF.
IF gw_fcat-fieldname EQ 'OBJVERS'.
gw_fcat-no_out = 'X'.
ELSEIF gw_fcat-fieldname EQ 'ROWFLAG'.
gw_fcat-no_out = 'X'.
ELSEIF gw_fcat-fieldname EQ 'MBR_NAME'.
gw_fcat-no_out = 'X'.
ELSEIF gw_fcat-fieldname EQ '/CPMB/CALC'.
gw_fcat-no_out = 'X'.
ELSEIF gw_fcat-fieldname EQ 'TXTLG'.
gw_fcat-outputlen = 70.
ELSEIF gw_fcat-fieldname EQ '/CPMB/HIR'.
gw_fcat-outputlen = 20.
ENDIF.
MODIFY gt_fcat2 FROM gw_fcat
TRANSPORTING reptext no_out outputlen.
ENDLOOP.
lcl_main=>create_dynamicalv( ).
lcl_main=>merge_tables( ).
CHECK NOT <gfs_t_final> IS INITIAL.
* SORT <gfs_t_final> BY ('TXTLG').
CALL SCREEN 9000.
ENDIF.
ENDIF.
ENDMETHOD. "show_alv1
METHOD show_alv1.
IF go_custom_container IS INITIAL.
CREATE OBJECT go_custom_container
EXPORTING
* parent =
container_name = gw_g_container
* style =
* lifetime = lifetime_default
* repid =
* dynnr =
* no_autodef_progid_dynnr =
EXCEPTIONS
cntl_error = 1
cntl_system_error = 2
create_error = 3
lifetime_error = 4
lifetime_dynpro_dynpro_link = 5
OTHERS = 6
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CREATE OBJECT go_grid1
EXPORTING
* i_shellstyle = 0
* i_lifetime =
i_parent = go_custom_container
* i_appl_events = 'X'
* i_parentdbg =
* i_applogparent =
* i_graphicsparent =
* i_name =
* i_fcat_complete = SPACE
EXCEPTIONS
error_cntl_create = 1
error_cntl_init = 2
error_cntl_link = 3
error_dp_create = 4
OTHERS = 5
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CALL METHOD go_grid1->set_table_for_first_display "#EC CI_SUBRC
* EXPORTING
* i_buffer_active =
* i_bypassing_buffer =
* i_consistency_check =
* i_structure_name =
* is_variant =
* i_save = 'X'
** i_default = 'X'
* is_layout =
** is_print =
** it_special_groups =
* it_toolbar_excluding =
* it_hyperlink =
* it_alv_graphics =
* it_except_qinfo =
* ir_salv_adapter =
CHANGING
it_outtab = <gfs_t_final>
it_fieldcatalog = gt_fcat2
* it_sort =
* it_filter =
EXCEPTIONS
invalid_parameter_combination = 1
program_error = 2
too_many_lines = 3
OTHERS = 4.
IF sy-subrc <> 0.
* Implement suitable error handling here
ENDIF.
ENDIF.
ENDMETHOD. "SHOW_alv1
ENDCLASS. "lcl_main IMPLEMENTATION
AT SELECTION-SCREEN OUTPUT.
IF p_radio1 EQ 'X'.
LOOP AT SCREEN.
IF screen-group1 = 'M1'.
screen-active = 0.
MODIFY SCREEN.
ENDIF.
* IF screen-group1 = 'M'.
* screen-active = 0.
* MODIFY SCREEN.
* ENDIF.
ENDLOOP.
ENDIF.
* IF p_radio2 EQ 'X'.
* LOOP AT SCREEN.
* IF p_reason EQ 30.
* IF screen-group1 = 'M2'.
* screen-active = 0.
* MODIFY SCREEN.
* ENDIF.
* ENDIF.
* ENDLOOP.
* ENDIF.
START-OF-SELECTION.
IF p_radio1 EQ 'X'.
SELECT SINGLE data_table desc_table
INTO (gw_datatbl , gw_descrptbl)
FROM uja_dimension CLIENT SPECIFIED
WHERE mandt EQ sy-mandt
AND appset_id EQ p_env
AND dimension EQ p_dim.
IF sy-subrc EQ 0.
SELECT appset_id dimension tech_name attribute_name caption
INTO TABLE gt_attr
FROM uja_dim_attr CLIENT SPECIFIED
WHERE mandt EQ sy-mandt
AND appset_id EQ p_env
AND dimension EQ p_dim.
IF sy-subrc EQ 0.
lcl_main=>create_alv1( ).
ENDIF.
ENDIF.
ELSE.
IF p_reason NE 30.
SELECT *
INTO TABLE gt_except
FROM zbpcbt007 CLIENT SPECIFIED
WHERE mandt EQ sy-mandt
AND appset_id EQ p_env
AND dimension EQ p_dim
AND reasoncd EQ p_reason.
IF sy-subrc EQ 0.
SELECT SINGLE data_table desc_table
INTO (gw_datatbl,gw_descrptbl)
FROM uja_dimension CLIENT SPECIFIED
WHERE mandt EQ sy-mandt
AND appset_id EQ p_env
AND dimension EQ p_dim.
IF sy-subrc EQ 0.
SELECT appset_id dimension tech_name attribute_name caption
INTO TABLE gt_attr
FROM uja_dim_attr CLIENT SPECIFIED
WHERE mandt EQ sy-mandt
AND appset_id EQ p_env
AND dimension EQ p_dim.
IF sy-subrc EQ 0.
gt_except_t[] = gt_except[].
SORT gt_except_t.
DELETE ADJACENT DUPLICATES FROM gt_except_t.
IF gt_except_t IS NOT INITIAL.
SELECT tech_name
INTO TABLE gt_techattr
FROM uja_dim_attr CLIENT SPECIFIED
FOR ALL ENTRIES IN gt_except_t
WHERE mandt EQ sy-mandt
AND appset_id EQ p_env
AND dimension EQ p_dim
AND attribute_name EQ gt_except_t-attrib.
IF sy-subrc EQ 0.
lcl_main=>create_alv2( ).
ENDIF.
ENDIF.
ENDIF.
ENDIF.
ENDIF.
ELSEIF p_reason EQ 30.
SELECT SINGLE data_table desc_table
INTO (gw_datatbl,gw_descrptbl)
FROM uja_dimension CLIENT SPECIFIED
WHERE mandt EQ sy-mandt
AND appset_id EQ p_env
AND dimension EQ p_dim.
IF sy-subrc EQ 0.
* gt_except_t[] = gt_except[].
* SORT gt_except_t BY attrib.
* DELETE ADJACENT DUPLICATES FROM gt_except_t COMPARING attrib.
* IF gt_except_t IS NOT INITIAL.
SELECT refdimension
INTO TABLE gt_refdim
FROM zbpcbt009 CLIENT SPECIFIED
* FOR ALL ENTRIES IN gt_except_t
WHERE mandt EQ sy-mandt
AND appset_id EQ p_env
AND dimension EQ p_dim
AND attrib EQ p_attr."gt_except_t-attrib.
IF sy-subrc EQ 0.
gt_refdim_t[] = gt_refdim[].
SORT gt_refdim_t BY dimension.
DELETE ADJACENT DUPLICATES FROM gt_refdim_t COMPARING
dimension.
IF gt_refdim_t IS NOT INITIAL.
SELECT data_table desc_table
INTO TABLE gt_refdata
FROM uja_dimension CLIENT SPECIFIED
FOR ALL ENTRIES IN gt_refdim_t
WHERE mandt EQ sy-mandt
AND appset_id EQ p_env
AND dimension EQ gt_refdim_t-dimension.
IF sy-subrc EQ 0.
SELECT appset_id dimension tech_name attribute_name
caption
INTO TABLE gt_attr
FROM uja_dim_attr CLIENT SPECIFIED
WHERE mandt EQ sy-mandt
AND appset_id EQ p_env
AND dimension EQ p_dim.
IF sy-subrc EQ 0.
SELECT tech_name
INTO TABLE gt_techattr
FROM uja_dim_attr CLIENT SPECIFIED
* FOR ALL ENTRIES IN gt_except_t
WHERE mandt EQ sy-mandt
AND appset_id EQ p_env
AND dimension EQ p_dim
AND attribute_name EQ p_attr."gt_except_t-attrib.
IF sy-subrc EQ 0.
REFRESH: gt_refdim_t.",gt_except_t.
lcl_main=>create_alv3( ).
ENDIF.
ENDIF.
ENDIF.
ENDIF.
ENDIF.
ENDIF.
* ENDIF.
* ENDIF.
ENDIF.
ENDIF.
*& Module SHOW_ALV1 OUTPUT
*&-------Yes you can, although you need to do it slightly differently, depending on what your 'original' form is doing.
You end up having to do two things:
1. In your second tabular form, you need to explicitly identify the relevant form fields using calls to the relevant APEX_ITEM functions - as well as this, you need to 'manually' specify the array number in the arguments for the function call, ensuring it doesn't overlap with your original form. Normally, this aspect is done for you.
2. Create your own custom CRUD processes, referencing the above elements. There are a few threads floating around the forum relating to how to deal with this. Do a search for "APEX_APPLICATION.G_F" or "HTMLDB_APPLICATION.G_F" for pointers.
Happy hunting!
Maybe you are looking for
-
Rowcount is zero , but the table displays data on the screen
Hi, I have created an arraylist, which holds objects of a custom class. The custom class contains variables, that holds the data of each row. I did binding between this arraylist and a table. On the UI, the table is displayed with the data present in
-
HT1338 how do you get ios 6.0.1 on your ipod
how do you get ios 6.0.1 on your ipod
-
Cannot open Adobe Photo Elements 10 on my PC
I cannot open Adobe Photo Elments 10 software on my PC. I purchased the software from a local Best Buy retailer about one year ago and registered the product serial number with Adobe. I also established an Adobe User ID and Password. I paid for th
-
Iphoto 11 causes error message
Hi, i am using iphoto 11 under Lion, actual version of all software! Since a few days every time I open one of my iphoto libraries I get the message, that library is inconsistent and should be rapair. When I do so, iphoto deals fine with this library
-
Foreign Currency Valuation ..Run.. FAGL_FC_VAL
Hi Experts, I am working on ECC 6.0, I am doing FCV run for customers only ( FAGL_FC_VAL) i have also posted couple of customer invoices using foreign currency (USD) Doc date 15.12.2009, posting date : 15.12.2009, posting period :12... I have config