Single Sender(JDBC) to SAP - Multipe IDoc

Hi Experts,
In my scenario i need to send data from JDBC to SAP.
Based on the Delivery Type the data need to be passed to respective IDOCs.
There are 2 Delivery Types EL & LR.
For EL one IDOC should be populated(SHP_IBDLV),
and for LR another IDOC (SHP_OBDLV).
Please suggest me how to handle this scenario.
Thanks,
Kish.

hi Kish
as your requirment you have to go for BPM, with Corelation .
this Corelation is based on your Delivery Types EL & LR.
for whole BPM scenario check out this link:
this will give you the steps:
/people/sudharshan.aravamudan/blog/2005/12/01/illustration-of-multi-mapping-and-message-split-using-bpm-in-sap-exchange-infrastructure
this is as your scenario:
/people/sravya.talanki2/blog/2005/08/24/do-you-like-to-understand-147correlation148-in-xi

Similar Messages

Mapping Error with Sender JDBC- Idoc scenario

Hi Guru's,
I've got a simple asyncronous sender JDBC to Idoc scenario, and I encounter a strange problem with the mapping.
When I test the mapping it works fine, but when I run the scenario, only the first element (a constant) of the Idoc gets mapped, and mapping stops with no errors.
Does someone know where to find the error?
Thanks,
Karst

Hi Karst,
There might be several reasons that you do not see the IDOC structures are not created/mapped:
1. Most of the IDOC structures are optional (minOccrs = 0), so you have to make sure the structure itself (not just the fields within that structure) is mapped to something that does exist in the source data.
2. Make sure your JDBC generated source data does have the right namespace as you used in your mapping. I once had a similar problem, but finally found the source data generated in run time is slightly different from the one used in mapping in terms of namespace.
3. Test your mapping with the source data generated in runtime (you can copy it from SXMB_MONI). Then you may be able to find the problem.
Hope this helps.
Hart

What are the idoc to send data from sap hr to sap fi

what are the idoc to send data from sap hr to sap fi

Message type of IDoc depends on the data you wish to send.
please detail on the data that you need to send in the IDocs.
regards,
Nitin

Configuring sender jdbc adapter

Hi all,
I have a requirement in which i have to select certain data from Oracle table and send it to an IDOC via SAP XI.
Problem is the select can happen from several tables. For example:
SELECT col1,col2,col3 FROM <tablename>
The <tablename> has to be variable. I do not need to do any JOIN. At a time select will be only from a single table i.e. col1, col2, col3 will all belong to the same table. But the adapter should poll multiple tables.
One more requirement is that once a particular record from a particular table has been selected some UPDATE also need to be done on the same record.
Pls can anybody provide me with a proper solution.
This requirement is a bit urgent.
Thanks in advance.
Regards
Neetu

Neetu,
You need to have the Table name dynamic in the Sender JDBC adapter's Select Query . This is not possible
You can consider using a Reciver JDBC adapter for which you can have a look at this blog ,
/people/bhavesh.kantilal/blog/2006/07/03/jdbc-receiver-adapter--synchronous-select-150-step-by-step
Or, you need a Separate sender JDBC adapter for every table to be polled.
>>One more requirement is that once a particular record from a particular table has been selected some UPDATE also need to be done on the same record.
If you are using the Sender JDBC adapter, this would be simple using the UPDATE field of the Sender JDBC adapter .
If you are planning to use Receiver JDBC adapter, then You need a separate Send Step for this Update.
Better way to go would be to have separate sender JDBC adapters.
Regards,
Bhavesh

Error in sender JDBC Adapater

I have a select query as
SELECT * FROM ULIDTA2.F5631505 where QSINTF ='Y'
update query is
Update ULIDTA2.F5631505 set QSINTF='Y' where QSINTF ='N'
i get the following error in my Adapater .
Sender Adapter v2108 for Party '', Service 'BS_Database_to_RFC_BPM':
Configured at 2006-03-10 12:31:18 GMT+08:00
History:
- 2006-03-10 12:33:06 GMT+08:00: Retry interval started. Length: 60.000 s
- 2006-03-10 12:33:05 GMT+08:00: Error: SQLException during update 'Update ULIDTA2.F5631505 set QSINTF='Y' where QSINTF ='N'': SQLException: [SQL7008] F5631505 in ULIDTA2 not valid for operation.
- 2006-03-10 12:33:00 GMT+08:00: Processing started
- 2006-03-10 12:32:05 GMT+08:00: Error: SQLException during update 'Update ULIDTA2.F5631505 set QSINTF='Y' where QSINTF ='N'': SQLException: [SQL7008] F5631505 in ULIDTA2 not valid for operation.
- 2006-03-10 12:32:00 GMT+08:00: Processing started

Hi Amit,
A JDBC sender adapter has 2 essential fields,
1. SQL Statement
2. Update Statement
Your SQL statement will contain your SELECT statement and once your SQL statement is executed, UPDATE statement is executed. This is done so that records that have been selected by the SQL statement should not be selected again as the JDBC sender adapter will poll over the database for every poll interval.
If you want to SELECT something from your Database, then you will have to go for a JDBC sender adapter.
But, if you want to insert/update your Database, then you can go for a JDBC receiver adapter.
Multiple insertions are possible for a JDBC receiver, but multiple Selection queries (different select queries) are not possible for a single JDBC sender adapter.
Just check these links to understand how JDBC adapters work,
If you wanna do update/insert you will have to follow the
<a href="http://help.sap.com/saphelp_nw04/helpdata/en/2e/96fd3f2d14e869e10000000a155106/content.htm">Document Formats for the Receiver JDBC Adapter</a>
For Configuring the Receiver JDBC Adapter refer:
<a href="http://help.sap.com/saphelp_nw04/helpdata/en/64/ce4e886334ec4ea7c2712e11cc567c/content.htm">Configuring the Receiver JDBC Adapter</a>
For Configuring the Sender JDBC Adapter refer:
<a href="http://help.sap.com/saphelp_nw04/helpdata/en/7e/5df96381ec72468a00815dd80f8b63/content.htm">Configuring the Sender JDBC Adapter</a>
Regards,
Abhy

Sender jdbc adapter - no update query

hi ,
i am using pi 731 single stack.
the scenario is - PI has to pick data from view of a hana database. i am using jdbc sender for it.
pi will not have access to update the table,only pi can read the view of database.So,PI can't use UPDATE query.
If in jdbc sender channel ,I use SELECT query only and no UPDATE query - will it work ? what will happen if there are 100 records in the view and PI failed after fetching 43 records..will it pick from 44th record next time OR it will start from 0 again ?
rgds

Hi SAP PI,
It has no sense to use the sender JDBC without update query because then always will be taken the same records.
If you cant update the source DB you only have the choice to talk with the DB administrators that they develop for you a stored procedure that it has to do the work to get different records in every PI access.
If the PI record process fail with impossible source database update update, the only way (afaik) is to do a PI alert and to communicate it to db sender administrators. There are another option like to store the data in a intermediate table, and so on but all possibilities that i can think now are not to enough good.
Regards.

Packaging IDOCs - SAP R3(IDOCs) - XI - Flat File

Hi,
I've got the scenario SAP R3(IDOCs) -> XI -> Flat File.
The IDOCs are sent from R3 with the Option Send by Packet. There is 10 Idocs per packet.
What I want to do is create one flat file for each packet.
So one packet of 10 Idocs must create 1 flat file.
Is it possible to do that whithout BPM ?
Regards,
Vincent

Hi,
Refer to this weblog which gives step by step process for IDoc to file scenario.
/people/prateek.shah/blog/2005/06/08/introduction-to-idoc-xi-file-scenario-and-complete-walk-through-for-starters
Use BPM to collect tyhe Idoc, standard pattern is available for the same.
http://help.sap.com/saphelp_nw04/helpdata/en/08/16163ff8519a06e10000000a114084/content.htm
This following weblog explains the collection of Idoc.
/people/pooja.pandey/blog/2005/07/27/idocs-multiple-types-collection-in-bpm - Collection of IDoc to Single File
This also explains the IDoc package.
/people/sravya.talanki2/blog/2005/12/09/xiidoc-message-packages
Thanks,
Prateek

Sender JDBC

We have a scenario for sender JDBC adapter returning close to 2000 rows in a single snapshot. But I would like to split these at these into 2000 messages instead of 1 single message without using BPM. Any suggestions.
Juan

> Hello,
>
> What you are implying is that I can have a single
> interface and use multi-mapping to split the messages
> coming inbound, into different messages ? i.e One
> interface getting 1000 ROWS by using multi mapping
> the AE would split it into 1 message per row and
> persist it.
Juan,
Yep..!! Use multimappingso that each of the 1000 record in the source is split into a separate target message . Isnt this what you need?
Regards,
Bhavesh

Sender JDBC Communication Update SQL Command Problem!

Hi all,
I am trying to do a SENDER JDBC Scenario in XI.
I fetch the Records from the table Once per day based on the Current Date.
I do not have any Update Credentials in the table.
I can only perform Select Querry.
But when i am trying to configure the SENDER JDBC Channel its asking me to enter value for Update SQL Command in Sender JDBC communication channel Process Parameters.
Its not accepting BLANK or ' * ' Values.
But i have only Select Querry credentials in the table. I can only pick the values cant Update the tables but.
In the Above scenario how can i configure the Sender JDBC CC without Updating the Table after fetching the value?
Please Advice
Regards,
Senthilprakash.

Hi,
Specify the Update SQL Statement value as .
http://help.sap.com/saphelp_nw04/helpdata/en/14/80243b4a66ae0ce10000000a11402f/frameset.htm
Thanks
SaNv...
Edited by: Sãnthosh Kûmãr V on Oct 8, 2008 10:44 AM
Edited by: Sãnthosh Kûmãr V on Oct 8, 2008 10:45 AM

Sender Port in FILE to IDOC scenario

Hi all,
I am trying to do a File - SAP XI-IDOC scenario.
The idoc which is getting created in XI is having senderport as SAPABC where ABC is my XI system id.
i have not craeted this sender port and i am not able to find it in idx1 tx.code of XI.
Can anyone please tell me how and where is this port is getting created. Will it get genarated automatically by the XI system for posting the idocs?
thanks in adavance
Jagruthi

Hi Jagruti,
Please refer to these blogs and threads:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/73527b2c-0501-0010-5398-c4ac372c9692
/people/sravya.talanki2/blog/2006/12/25/aspirant-to-learn-sap-xiyou-won-the-jackpot-if-you-read-this-part-i
/people/sravya.talanki2/blog/2006/12/26/aspirant-to-learn-sap-xiyou-won-the-jackpot-if-you-read-this-part-ii
/people/sravya.talanki2/blog/2006/12/27/aspirant-to-learn-sap-xiyou-won-the-jackpot-if-you-read-this-part-iii
/people/ravikumar.allampallam/blog/2005/02/23/configuration-steps-required-for-posting-idocsxi
Hope these blogs help you.
Regards,
Sarvesh Desai

Sender JDBC to Receiver RFC scenario

Hi All,
I have to configure an scenario of sender JDBC to receiver RFC wherein SAP PI will be pulling data from third party database (Oracle).
Since I am configuring such scenario of sender JDBC, I want help on every important key aspects/prerequisites of configuring sender JDBC adapter/channel. I want to understand about Database Connection, Processing Parameters, etc. details while configuring sender JDBC channel and their significance/relevance.
Also I need guidelines about the source data structure (message type or external definition) to be used/created in ESR.
How sender JDBC channel and receiver JDBC channel differs from each other?
Please guide me on this.
Thanks & Regards,
Amit Patil

Hi Amit,
First of all you should read the sap.help documentation:
Configuring the Sender JDBC Adapter - Advanced Adapter Engine - SAP Library
Configuring the Receiver JDBC Adapter - Advanced Adapter Engine - SAP Library
Later, you can read Rajs's blog to advance concepts and perfomance JDBC Receiver scenarios best practices part-1
Finally, search the other blogs and documents in the SCN.
How sender JDBC channel and receiver JDBC channel differs from each other?
JDBC sender always does a poll to a DB table (with join some tables) in wich table you will need a field checkbox to mark the registers read, and the the receiver JDBC you can do a typical SQL construction like SELECT, INSERT, DELETE, etc. Both cases need the JDBC DB driver installed (check the SAP notes for this, also you can find some examples in the SCN:http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/8000cffc-6b92-2d10-3493-f2ac1399242f?quicklink=index&… PI/XI: deploy a JMS/JDBC driver without JSPM? ).
Regards.

Stored procedure : how to call SP in sender JDBC adapter for mysql

HI friends ,
we have JDBC---->XI--
>SAP scenario. For some business requirement, we have to call STORED PROCEDURE , please let me know how to call SP in sender JDBC adapter for mysql .
Thanks
mojib

Hi Mojib,
Please create a sample stored procedure like this which contains select statement and in communication channel give
wite stored procedure name only to sql query statment and in update statement write <test>.
I am executing this stored procedure successfully.
Create Proc GetResultX As
Begin
Select * From TESTX
End
Execute statement for stored procedure is :
Exec GetResultX
Regards
Laxmi Bhushan Jha
Rewards point if found usful
I have given same answer to one of the same thread

Namespace issue in Sender JDBC message

Hi All,
My scenario is pulling data from Oracle DB(3rd party) and pushing it to SAP ECC system. Here I am using the table metadata in the form of an External Definition.I am directly using this ED in my message mapping and service interface. I am able to test the mapping locally, when I run the scenario the target message type is generated but the main element node inside is automatically suppressed. The structure examples are given as below(been taken from message mapping test tab):
Source
<?xml version="1.0" encoding="UTF-8"?>
<ns0:TABLE_NAME.resultSet xmlns:ns0="urn:sap.com:jdbcAdapter">
 <row>
 <A/>
 <BV/>
 </row>
</ns0:TABLE_NAME.resultSet>
Target:
<?xml version="1.0" encoding="UTF-8"?>
<MT_Inbound>
 <Main_Node>
 <X/>
 <Y/>
 </Main_Node>
</MT_Inbound>
I guess the problem is with the namespace and prefix which is coming along with the table metadata(ns0). I tried removing it by XML AnonymizerBean module in my sender JDBC channel but this did not solve the purpose.
Request you all to help in solving this.
Thanks in Advance
Lalitkumar.

As you should have already noticed, the structure of sender JDBC adapter does not match the meta data.
The structure of the ED imported is :
TABLE_NAME.resultSet
 TABLE_NAME.resultSet
 row
 A
 BV
The structure getting generated after polling the JDBC adapter is as given below(structure from moni inbound payload):
<?xml version="1.0" encoding="utf-8" ?>
- <TABLE_NAME.resultSet>
- <row>
<A>20110206</A>
<BV>06:38:56</BV>
</row>
I am not able to make out the difference here. I am able to also see the namespace when i check the same in the message mapping test tab.
I am also a little lost now as abhishek is on a different track.
Please comment.

Error in calling stored procedure in sender JDBC adapter

Hi Experts,
I am working on MySQl to SAP scenario. I have to use stored procedure in sender JDBC adapter.
I am calling SP as fallows: execute proc_dtdc_booking_interface_sd
But it returned following error,
Database-level error reported by JDBC driver while executing statement 'execute proc_dtdc_booking_interface_sd'. The JDBC driver returned the following error message: 'java.sql.SQLException: Unknown prepared statement handler (proc_dtdc_booking_interface_sd) given to EXECUTE'. For details, contact your database server vendor.
the way i called SP is correct ??
please suggest me how to resolve the issue ??
Regards,
Bhuvan.

Hi
Below is the code , when we are using this code directly in the mySQl command promp, it fetches 10 record but when the same code is called through XI adapter its fetching only one record
DELIMITER $$
DROP PROCEDURE IF EXISTS `proc_dtdc_booking_interface_sd` $$
CREATE DEFINER=`root`@`localhost` PROCEDURE `proc_dtdc_booking_interface_sd`()
BEGIN
declare done int(1);
declare v_dsr_booked_by char(1) ;
declare v_dsr_branch_code char(3) ;
declare v_dsr_cust_code varchar(7) ;
declare v_dsr_booking_date date ;
declare v_dsr_cnno char(9) ;
declare v_dsr_cn_type char(3) ;
declare v_dsr_cn_weight decimal(8,3) ;
declare v_dsr_dest char(3) ;
declare v_dsr_mode char(2) ;
declare v_dsr_amt decimal(10,2) ;
declare v_dsr_dox char(1) ;
declare v_office_code char(3) ;
declare v_dsr_status char(1) ;
declare v_dsr_remarks varchar(25) ;
declare v_dsr_refno varchar(20) ;
declare v_dsr_transmf_no varchar(10) ;
declare v_dsr_trans_status_xi char(1) ;
declare v_ndsr_cnno char(9) ;
declare v_ndsr_product char(3) ;
declare v_ndsr_sercharge decimal(8,3) ;
declare v_ndsr_ins_amt decimal(8,3) ;
declare v_ndsr_others decimal(8,3) ;
declare v_dr_amt_type decimal(2,0) ;
declare v_dr_extra_amt decimal(10,2) ;
declare v_sales_document varchar(2) ;
declare bookcur CURSOR for
SELECT *
FROM dtdcdb_rw.dtdc_booking_interface_sd
LIMIT 10;
DECLARE CONTINUE HANDLER FOR NOT FOUND SET DONE=1;
set done=0;
OPEN bookcur;
bookloop: loop
FETCH bookcur
INTO
v_dsr_booked_by ,
v_dsr_branch_code,
v_dsr_cust_code,
v_dsr_booking_date,
v_dsr_cnno,
v_dsr_cn_type,
v_dsr_cn_weight,
v_dsr_dest,
v_dsr_mode,
v_dsr_amt,
v_dsr_dox,
v_office_code,
v_dsr_status,
v_dsr_remarks,
v_dsr_refno,
v_dsr_transmf_no,
v_dsr_trans_status_xi,
v_ndsr_cnno,
v_ndsr_product,
v_ndsr_sercharge,
v_ndsr_ins_amt,
v_ndsr_others,
v_dr_amt_type,
v_dr_extra_amt,
v_sales_document ;
IF DONE=1 THEN
LEAVE bookloop;
END IF;
select
v_dsr_booked_by As dsr_booked_by,
v_dsr_branch_code As dsr_branch_code,
v_dsr_cust_code As dsr_cust_code,
v_dsr_booking_date As dsr_booking_date,
v_dsr_cnno As dsr_cnno,
v_dsr_cn_type As dsr_cn_type,
v_dsr_cn_weight As dsr_cn_weight,
v_dsr_dest As dsr_dest,
v_dsr_mode As dsr_mode,
v_dsr_amt As dsr_amt,
v_dsr_dox As dsr_dox,
v_office_code As office_code,
v_dsr_status As dsr_status,
v_dsr_remarks As dsr_remarks,
v_dsr_refno As dsr_refno,
v_dsr_transmf_no As dsr_transmf_no,
v_dsr_trans_status_xi As dsr_trans_status_xi,
v_ndsr_cnno As ndsr_cnno,
v_ndsr_product As ndsr_product,
v_ndsr_sercharge As ndsr_sercharge,
v_ndsr_ins_amt As ndsr_ins_amt,
v_ndsr_others As ndsr_others,
v_dr_amt_type As dr_amt_type,
v_dr_extra_amt As dr_extra_amt,
v_sales_document As sales_document;
update dtdcdb_rw.dsr_table
set dsr_trans_status_xi='T'
where dsr_cnno=v_dsr_cnno;
end loop;
SELECT *
FROM dtdcdb_rw.dtdc_booking_interface_sd
LIMIT 10;
END $$
DELIMITER ;
Please help
Regards
Bhuvan

Error in communication channel sender JDBC AS400

The communication channel worked ok, but suddenly they began to give the following error:
Error during database connection to the database URL 'jdbc:as400://10.1.0.254/afildat' using the JDBC driver 'com.ibm.as400.access.AS400JDBCDriver': 'com.sap.aii.adapter.jdbc.sql.DriverManagerException: Cannot establish connection to URL 'jdbc:as400://10.1.0.254/afildat': java.awt.HeadlessException.
The driver was installed again, but error persist.
Thansk

Hi,
This issue is due the Sender JDBC Server got restarted or down, check the server connectivity.
If you found still the issue then Stop & Start the communication channgel once, surely your issue will be resolved immediately.
Regards
Venkat

Single Sender(JDBC) to SAP - Multipe IDoc

Similar Messages

Maybe you are looking for