Mapping Error with Sender JDBC- Idoc scenario

Hi Guru's,
I've got a simple asyncronous sender JDBC to Idoc scenario, and I encounter a strange problem with the mapping.
When I test the mapping it works fine, but when I run the scenario, only the first element (a constant) of the Idoc gets mapped, and mapping stops with no errors.
Does someone know where to find the error?
Thanks,
Karst

Hi Karst,
There might be several reasons that you do not see the IDOC structures are not created/mapped:
1. Most of the IDOC structures are optional (minOccrs = 0), so you have to make sure the structure itself (not just the fields within that structure) is mapped to something that does exist in the source data.
2. Make sure your JDBC generated source data does have the right namespace as you used in your mapping. I once had a similar problem, but finally found the source data generated in run time is slightly different from the one used in mapping in terms of namespace.
3. Test your mapping with the source data generated in runtime (you can copy it from SXMB_MONI). Then you may be able to find the problem.
Hope this helps.
Hart

Similar Messages

Catch Mapping Error in File to IDoc scenario

Configured BPM and now learning Error Handling. I know that through BPM we can handle system Errors, but I doubt whether Mapping error is a system error.
I am interested to know the classification of errors with examples, preferably listing out all types of errors.
Please provide some weblogs or explain briefly how to handle system and application errors through BPM.
Thanks,
Raja

Hi Raja,
You will need CCMS if you want to send the Alerts to external system or you want to access the ALerts from the transaction. You can capture your alerts without this also.
When you go to Alert Configuration in the Runtime Workbench you can see Create Alert Rules. These rules are pertaining to the error generated in your AF,AE or IE.
Once you have completed the whole config. The error happening in the AE, IE or AF would trigger the alert. you can see this in your Alert Inbox.
The best would be if you go through the URL I have mentioned below.
http://help.sap.com/saphelp_nw04/helpdata/en/80/942f3ffed33d67e10000000a114084/content.htm
You have to use BPM only if you want to do an activity after the alerts are raised.
Regards
Vijaya
Message was edited by: vijaya kumari

Error at sender JDBC communication channel

Dear All,
While executing JDBC(MS-Access)-PI-RFC interface, we are getting error in sender JDBC communication channel. The error is as following:
Error during database connection to the database URL 'jdbc:odbc:Driver={Microsoft Access Driver (*.mdb)};DBQ=
sappidev\Datatran\Database.mdb' using the JDBC driver 'jdbc.odbc.JdbcOdbcDriver': 'com.sap.aii.adapter.jdbc.sql.DriverManagerException: Can not establish connection:: SQLException: [Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified'.
I have checked various posts on forums and as per those no drivers installation is required to access MS-Access database and I am not able to find any post which could solve my problem.
Kindly guide me on what might be the problem and how this can be resolved.
Regards,
NJ

Hi Nishu,
That error ALWAYS means your DSN name is incorrect or can't be accessed for some reason (permission). The ODBC part says that the bridge is working.
But that DSN is 100% wrong or cannot be seen by the user account that the server is running as. Make sure you have a system DSN and not a user one.
You can refer these....
http://bytes.com/topic/java/answers/625400-java-sql-sqlexception-microsoft-odbc-driver-manager-data-source-name-not-found
http://www.daniweb.com/forums/thread13092.html#
Hope this will help you....
Regds,
Pinangshuk.

Error with Download JDBC Drivers page

There appears to be an error with the JDBC Drivers download page. When navigating from the top-level download page, all I'm seeing is '<SCRIPT LANGUAGE="javascri'. Is there another page from which I can download the driver?
Guy Heathcote
Ordnance Survey
UK

The 10g and later drivers trade memory for performance. They use much more memory than the 9i drivers, but are much faster. If you look at the JDBC FAQ here on OTN there is some more info on where the memory is going. The stack trace you posted is what I would expect to see from buffer allocation described in the FAQ.
Douglas

MAPPING ERROR with IDOC

Hi Friends,
I am working on IDOC to JDBC scenario. Here i am using DEBMAS06 IDOC . when i tried to trigger an IDOC from BD12 T code its triggering an idoc but when i see it in MONI of XI, its giving mapping error. when i test my mapping program its executing successfully. even i tried to execute with the incoming data in the sxmb_moni, i mean that i filles my mapping test with the same data coming into MONI by filling all the segments coming into XI its executing successfully in mapping test.
but when i tried to trigger an idoc from we19 or from bd54 i am facing this error. can any one please let me know what else i can do for running this scenario. let me know your comments.
Thanks
Ramana.

Hi friends, I am getting the following error. On the sender side we dont need to take care of the structure because we will be importing the IDOC from the application system directly. on the receiver side i have created the structure for the data base. the mapping is running fine in my mapping test. still i am not getting what else i need to do. please comment on this.
<SAP:Code area="MAPPING">EXCEPTION_DURING_EXECUTE</SAP:Code>
<SAP:P1>com/sap/xi/tf/_MessageMapping_</SAP:P1>
<SAP:P2>com.sap.aii.utilxi.misc.api.BaseRuntimeException</SAP:P2>
<SAP:P3>RuntimeException in Message-Mapping transformatio~</SAP:P3>
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>com.sap.aii.utilxi.misc.api.BaseRuntimeException thrown during application mapping com/sap/xi/tf/_MessageMapping_: RuntimeException in Message-Mapping transformatio~</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>

IDOC is posting with Errors in File to IDOC scenario

Hi,
I did the File to IDOC scenario for CREMAS . IDOC is posting with Errors .. i.e. in the status record it was showing 56- EDI: Partner profile inbound not available ..
If I manually process that IDOC in WE19 , then it was processing successfully.. and in the we19 it was showing Inbound Processing : Port Not Maintained but even though manually it was posting fine...
any ideas regarding this will be appriciated.....
Regards
Babu

Please check whether you had done the following assuming your doing File to Idoc
Settings in your Business service for the receiving system
Please specify the RFC detination, SAP System and Client of the Receiving System in the adapter specific detials.
Settings in R/3
WE20 - Add the partner profile for the particular message type cremas and process code.
Your statement
" and that same logical system name had given as Message Specific Attributes in the Sender Business Sevice parameters in I.D "
Please do mention R/3 Details in the receiver business service or system.
Thnz

Mapping error in File to File Scenario.

In a file to file scenario some times sender communication channel picked the file, before the file is completely copied to the directory Though the poling intervals is 300 seconds. To my assumption, assume that the sender communication channel lastly polled on 10:10:10 and i am coping a file after 285 sec that is 10:14:55 and file size is 20 mb that takes 50 sec to copy. but the next sender communication channel poling is 10:15:10. here the file is partially copied but the communication channel picked the file and process. The scenarios throws mapping error because of in correct input file. This rarely accords but how to handle this. i want the cc to wait until the file is completely copied to the dir and then poll.

Hi ,
But there is some problem with system i guess. Adapter engine first load the whole file and then send it to Integration engine where after receiver and interface determination , mapping is excuted. So the fact that adapter picked up half of the file and tried to process does not seem correct.
Ideally this behaviour should not occurs.
If you are observing similar with all the adapter , you should also cross check with SAP support team.
Ranjeet Singh.

Error in Webservice to IDoc Scenario

Dear All,
Iam dealing with Web Service to IDoc Scenario . I have used Exactly Once in the Quality Of Service (QOS) in sender communication channel .
I got the following error:
ResponseCode: 200 (OK)
content-type:text/xml;charset=utf-8
content-length:458
x-xmb_ws_encoded:version=1%2e0&Sender.Party=%3a%3a&Sender.Service=bs_kalyan_ws&Interface=urn%3asap-com%3adocument%3asap%3aidoc%3amessages%5eDEBMAS%2eDEBMAS05&Receiver.Party=%3a%3a&Receiver.Service=bs_kalyan_ws&To.Interface=htttp%3a%2f%2fkalyan%5emi_kalyan_ws&MessageClass=SE&ProcessingMode=S&ConversationId=&MessageId=30B49C89-9E75-DA40-B1D8-C5416903FE7A&RefToMessageId=A1A63B08-51B6-524A-8386-98235D7A7834&QualityOfService=BestEffort&TimeSent=2007-08-30T05%3a58%3a41Z
soapaction:'http://sap.com/xi/XI/Message/30'
content-id:<[email protected]>
server:SAP Web Application Server (1.0;640)
<?xml version="1.0" encoding="utf-16"?>
<SOAP:Envelope xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/">
<SOAP:Body>
    <SOAP:Fault>
      <faultcode>SOAP:Server</faultcode>
      <faultstring>System Error</faultstring>
      <detail>
        <s:SystemError xmlns:s="http://sap.com/xi/WebService/xi2.0">
          <context>
          </context>
          <code>IDOC_ADAPTER.ATTRIBUTE_BE_NOT_SUPP</code>
          <text>Only asynchronous processing supported for IDoc adapter outbound processing</text>
        </s:SystemError>
      </detail>
    </SOAP:Fault>
</SOAP:Body>
</SOAP:Envelope>
Please do the needful.
Thanks in Advance,
Sarat

Hi Jai Shankar,
Ya what you told is correct just see the message that i got in sxmb_moni :
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:ReliableMessaging xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:QualityOfService>BestEffort</SAP:QualityOfService>
</SAP:ReliableMessaging>
But in ID part in Sender side communication channel QOS is EO only. How can this happen ?
Regards,
Sarat

Error to send a IDOC from ECC to SUS

Hi,
I am trying to connect to SAP SUS System using HTTP adapter using PI 7.0.The scenario is
ECC ->PI->SAP SRM. I have configured HTTP adapter as the receiver with addressing type as HTTP Destination. I have created a RFC destination of type H pointing to SAP SUS on PI. I have encountered the following error after executing the scenario.
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIAdapter</SAP:Category>
<SAP:Code area="PLAINHTTP_ADAPTER">ATTRIBUTE_SERVER</SAP:Code>
<SAP:P1>500</SAP:P1>
<SAP:P2>Internal Server Error</SAP:P2>
<SAP:P3>Error during parsing of SOAP header</SAP:P3>
<SAP:P4 />
<SAP:AdditionalText />
<SAP:Stack>HTTP server code 500 reason Internal Server Error explanation Error during parsing of SOAP header</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
I have configured HTTP receiver with Addressing type HTTP Destination and configured the HTTP destination field with RFC destination(Connection Type H) created on PI. Here my source and target structures are same i.e DELVRY03. I have triggered DELVRY03 idoc from ECC and i am expecting same xml to be sent to SAP SUS but stuck up with the above mentioned error.
Someone know how fix this problem?
Tks,
Erik

HI,
As per my understanding to your scenario, You want to send one IDoc from ECC to SAP SUS system using SAP PI.
So i hope you must have configured on all the steps required to Send one IDoc to PI syste, Secondly, are you using any Standard interface in PI to send data to SAP SUS system? If yes, you need to create an HTTP Destination for that system and then you have to create XI Receiver Adapter with that HTTP destination to post incoming message to SAP SUS system.
Your error suggests you are using Plain HTTP adapter to post data to SAP SUS, which is in my understanding is incorrect.
Regards
Aashish Sinha
Edited by: Aashish Sinha on Feb 21, 2011 9:15 AM

Error in File to IDOC Scenario

Hi,
I have File to IDOC scenario.
I am getting error in sender file channel.
"Conversion initialization failed: java.lang.Exception: java.lang.Exception: java.lang.Exception: Error(s) in XML conversion parameters found: Mandatory parameter 'xml.keyfieldName': no value found "
Although I have used this parameter in content conversion 'xml.keyfieldName' (for each sub structure and defined a key field).
Despite of this error in sender channel I am receiving the message in XI.
But in XI also it throws error :
"Unable to convert the sender service PG_TOM_CEEMEA_RU_SFA to an ALE logical system"
Any help on this ?
Thanks,
Vikas

Hello Vikas,
I am getting error in sender file channel.
"Conversion initialization failed: java.lang.Exception: java.lang.Exception: java.lang.Exception: Error(s) in XML conversion parameters found: Mandatory parameter 'xml.keyfieldName': no value found "
Although I have used this parameter in content conversion 'xml.keyfieldName' (for each sub structure and defined a key field).
Check your flat file structure whether the key field you have chosen is appropriate and also recheck the FCC details whether you have assigned the value for the key field i.e. keyFieldValue.
"Unable to convert the sender service PG_TOM_CEEMEA_RU_SFA to an ALE logical system"
regarding the above error refer this
https://wiki.sdn.sap.com/wiki/display/XI/Unable%20to%20convert%20Sender%20system%20to%20ALE%20logical%20system
Regards,
Prasanna

Problem with Sender JDBC adapter using StoredProcedures

Hi All,
I am facing some prblem when i am using StoredProcedure. Please look at the error which i observe in the traces when i try to execute a stored procedure using Sender JDBC channel.
SQLException during query 'execute MAG_C0210.dbo.biz_mag_ubicaciones @data="MAG_C0210" , @idciclovida=" ", @idmaestro=" ", @idtiporeplicacion=" "':com.microsoft.sqlserver.jdbc.SQLServerException: The statement did not return a result set
Please help me in this regard ASAP.
Cheers,
Soorya

Hi Praveen,
It is working fine when i executed the same in the SQL editor but when I use with XI it is failing with error
mentioned earlier. Please check this and help in solving this asap.
Regards,
Soorya

Error in Sender JDBC adpter

Hi,
I got the following error in sender communication channel monitoring.
Error during database connection to the database URL 'jdbc:odbc:Driver = (Microsoft Access Driver (.mdb)); DBQ = //db/TestDB.mdb using the JDBC driver 'sun.jdbc.odbc.JdbcOdbcDriver': 'com.sap.aii.adapter.jdbc.sql.DriverManagerException: Cannot establish connection to URL 'jdbc:odbc:Driver = (Microsoft Access Driver (.mdb)); DBQ = //172.19.61.54/jdbc/T': java.lang.NullPointerException'
Pleae help me to solve this error.
Thanks,
Sreedivia

hi
check whether MS Access drivers deployed correctly or not
check with the basis team
also check this blog
Connecting to MS Access using receiver JDBC Adapter
Connecting to MS Access using receiver JDBC Adapter (Without DSN)
regards
kummari

How to catch Posting error in File to IDoc Scenario?

I have successfully completed File to IDoc Scenario. Now I am interested in catching posting error. i.e., if mapping goes well and when IDoc is being sent to Recipient system then if any posting error is encountered, then a mail should go to a recipient.
Can anybody suggest the solution.
Regards,
Suraj Kumar

Hi Suraj,
this can be done by triggerring an alert to the recipient.chk out these links to trigger a alert
/people/sap.user72/blog/2005/01/14/alert-management--improving-monitoring-of-your-landscape
/people/sap.user72/blog/2005/01/14/alert-management--improving-monitoring-of-your-landscape
regards
jithesh

Error while sending JDBC Results to XI

Dear members ,
I have configured a JDBC Sender based on PLain J2SE Adapter Engine.
When i start the adapter ,i get an error message
ERROR: Finished sending query result to Integration Engine with error "com.sap.aii.messaging.net.TransportException: Sending message '8ba707a0f78911d98f64c565c0a8004d' to Integration Server failed with 'SYSTEM_NOT_CONFIGURED_AS_XMB': '', context '?' , must retry". Skip confirmation and proceed with next query
Can anybody help me out.
My Configuration is as follows :-
jdbc adapter java class
classname=com.sap.aii.messaging.adapter.ModuleDB2XMB
version=30
mode=DB2XMB
Integration Engine address and document settings (example, see docu)
XI.TargetURL=http://hwsapxi:8000/sap/xi/engine?type=entry
XI.User=xiappluser
XI.Password=welcome1
XI.QualityOfService=EO
XI.SenderParty=
XI.SenderService=Factory_Sender
XI.ReceiverParty=
XI.ReceiverService=Factory_Receiver
XI.Interface=FactoryMessageInterface
XI.InterfaceNamespace=http://sap.com/factorydata

Ravindra,
It could be that the AE was not configured properly during installation. Please refer to the below link and see it helps you narrow down your problem.
Installation - Plain J2SE Adapter Engine
http://help.sap.com/saphelp_nw04/helpdata/en/b3/cc633c3a892251e10000000a114084/frameset.htm
regards,
SK

Error in sender sap idoc side

Hi Experts,
            1, When the sender post idoc to PI it shows the following
              error in sender sap system.
               Error:No service for system SAPQ01 client 118 in integration directory
            2, Is it possible to post the idoc to PI With out activating the integ directory Object in PI(Integ.repoistery activated).
            3, If possible, where can i see the idoc datas in PI before activation.
Thanks

Hi Raja,
You send IDocs from system ABC to XI. In the control record of the IDoc,the SNDPOR field contains the value "SAPABC". The client of the sending system is determined by the MANDT field of the control record. The system ID and client are then used to determine a service without party of the
type (business-system/business-service):
Business system
-> Activities in the System Landscape Directory (SLD)(Create technical
system):
Create a technical system for system ABC in the SLD, and create the client for this. Do not forget to assign an "ALE logical system" (for example, "ABCCLNT123") to this technical system.
SLD (Business system):
You can now explicitly assign a business system to this client. For more details, refer to the SLD documentation.
Activities in system ABC (self-registration in the SLD):
Alternatively, you can register the system in the SLD in system ABC with Transaction RZ70. You will find detailed information about the SLD registration of systems on the SAP Service Marketplace for the
"Exchange Infrastructure" in the document "Exchange_Installation_Guide.pdf".
In system ABC, you can check your configuration with Transaction SLDCHECK.
Activities in Integration Directory (import business system from SLD):
You will find the business systems under Services Without Party in the Integration Services. In the Service menu, you will find the system identifiers, the client, and the corresponding ALE logical
system under "Objects"->"Adapter-specific identifiers". Use the Import/Update button to copy the data from the SLD, to create business systems, or to update their identifiers.
Business service
-> Activities in the Integration Builder directory:
You want to create a service without party that is not part of your system infrastructure and is therefore not maintained in the SLD. In the Integration Builder directory, you will find the "Business-Services" under Services Without Party. In the Service menu, you will find the system identifiers, the client, and the corresponding ALE logical system under "Objects"->"Adapter-specific
identifiers".
Activate the change list in Integration Directory.
In system ABC, you can restart the incorrect entry from Transaction SM58 .
Regds,
Pinangshuk.

Mapping Error with Sender JDBC- Idoc scenario

Similar Messages

Maybe you are looking for