Sip server settings Nokia E63

Question

Hi, I want sip settings of actionvoip in my Nokia E63 i wanna make new server profile plz help me if every one know this problem... I shall b very thankful to you for that.

Answer 1

I recommend the following steps for setting up your Nokia E63 for VoIP over Wifi (and perhaps for other S60 based phones as well), for Voip.ms, the realm settings were the same as the others:
How to configure SIP profile in Nokia Eseries devices for VoIP calls?
This text is a cut-and-paste from Nokia's FAQ.
The Nokia Eseries mobile devices support SIP VoIP internet calls. This article describes a sample configuration when user authentication is enabled in the SIP proxy and registrar servers. The proxy and registrar servers are located in the same device in this sample.
Before configuring the mobile device, the following information should be obtained from the SIP service provider (some other parameter values may also need to be checked if not using the default values):
SIP proxy and registrar server address ("sip.voipservice.com" in this sample)
SIP proxy realm ("inphone.com" in this sample)
SIP registrar realm ("sip.voiceservice.com" in this sample)
User name ("1234567" in this sample for both the proxy and registrar)
User password ("1234")
Public user name ("[email protected]" in this sample)
In order to establish a VoIP call, a WLAN access point needs to be defined in the mobile device access point settings and the mobile device must be within the reach of the WLAN network.
Start the mobile device SIP configuration by going to menu Tools > Settings > Connection > Sip Settings and by creating a new SIP profile. The following parameters are defined in the profile:
Profile name: Siptest (can be freely chosen)
Service profile: IETF
Default access point: WLAN access point used for the VoIP connections
Public user name: [email protected] (note that the public user name must be given in this format, including the domain name)
Use compression: no
Registration: when needed (set "always on" if you want the registration to occur automatically)
Use security: no
Proxy Server:
Proxy Server Address: sip.voipservice.com
Realm: inphone.com
User name: 1234567
Password: 1234
Allow loose routing: yes
Transport type: UDP
Port: 5060
Registrar:
Registrar Server Address: sip.voipservice.com
Realm: sip.voipservice.com
User name: 1234567
Password: 1234
Allow loose routing: yes
Transport type: UDP
Port: 5060
Note that the realm name is often the same for both the proxy and registrar but the name may also be different, as in this sample. If the registrar realm name is not correctly defined, the registration will fail. If the realm name of the proxy is not correct, the registration may succeed but the internet calls will fail.