Sir last day i update ios6.1 after this no sound were come in music sound key pad sound etc pls do need full reply asap
sir i have an iphone 4s last day after this cell showing trouble in sound of key , music any many others so pls solve and direction to me for solution
Hi Charlotte,
You don't say what your version of Windows you have. Assuming XP, go to Start | Run, type DXDIAG and click OK. Click the Sound tab and run the tests to eliminate a hardware problem first of all. If you don't hear anything, check your cables first of all. Also make sure "Mute" isn't checkmarked in your sound setup. You'll find that in Windows Control Panel.
Which browser do you use? If you have Firefox 4, sign up to the HTML5 trial @ http://www.youtube.com/html5
HTML5 is the latest video standard and doesn't require Flash player. Google is in the process of converting all its files to work with the new format. It may solve you problem. If you don't have Firefox 4, you can get it from here: http://www.mozilla.com/en-US/firefox/fx/
IE8 doesn't support HTML5.
To clean out your temp files, go to Start | Run, type: CLEANMGR and click OK. Click OK again to start the utility. Tick all the boxes except "Compress old files" because the latter takes too long, and then click OK. You can run this utility any time you wish by the way.
The above steps will hopefully fix your problem. If not, post here again please.
Similar Messages
-
Last op system update on mine/my wife's iPad causes all video apps (Netflix/Hulu/CBS/History,etc) to NOT flow uninterrupted; constant breaks. Type problem into Safari and many folks having same problems wig Hulu and other video/TV apps crashing repeatedly! It's EXTREMELY irritating and aggravating! The apps didn't crash like that until AFTER the latest operating system update for iPads was pushed/downloaded.
Among the alternatives not mentioned... Using a TiVo DVR, rather than the X1; a Roamio Plus or Pro would solve both the concern over the quality of the DVR, as well as providing the MoCA bridge capability the poster so desperately wanted the X1 DVR to provide. (Although the TiVo's support only MoCA 1.1.) Just get a third-party MoCA adapter for the distant location. Why the hang-up on having a device provided by Comcast? This seems especially ironic given the opinions expressed regarding payments over time to Comcast. If a MoCA 2.0 bridge was the requirement, they don't exist outside providers. So couldn't the poster have simply requested a replacement XB3 from the local office and configured it down to only providing MoCA bridging -- and perhaps as a wireless access point? Comcast would bill him the monthly rate for the extra device, but such is the state of MoCA 2.0. Much of the OP sounds like frustration over devices providing capabilities the poster *thinks* they should have.
-
My daughter's ipod nano shows up in "devices" when I plug it in...but it disappears. Right away it says it needs to update, but then after extracting the files it comes back and says that it can't be updated because it can't be unmounted. help?!
When in DFU mode and connected to the computer iTunes does not say anything but iTunes will see the iPod and you can restore the iPod via iTunes. When in recovery mode and you connect, iTunes will say it found an iPod in recovery mode.
-
I have just updated my iphone 3gs to the latest software however it wont activate the phone now. What can I do? Need a reply ASAP. Thanks
If you are experiencing Activation Problems because your Device has been Hacked / Jailbroken / Modified...
Then... Sorry... But...
The discussion of Jailbroken Devices is against the Terms of Use of this Forum.
You will need to look elsewhere.
Unauthorized modification of iOS
http://support.apple.com/kb/HT3743 -
I got an 3gs iphone and i've updated to ios5 after this my wifi is unavible.how does it happend?
i got an 3gs iphone and i've updated to ios 5 after this my wifi is unavible.how does it happend?
well... what kind of wireless signal is your router pushing out?
WEP?
WPA?
WPA2? -
IT THEN GOES TO THE PAGE
http://go.microsoft.com/fwlink/?LinkID=93504\
I CLOSE THIShello, when this is happening after you've already updated firefox with your admin account, try to delete the ''updates'' folder and ''active-update.xml & updates.xml'' within the %localappdata% folder of your restricted account like it is described in http://kb.mozillazine.org/Software_Update#Software_Update_not_working_properly
-
Define event to repeat on the last day of each month?
(I've searched the forum and can't find this question addressed)
I want to create a repeating event for the last day of each month. Is this possible?Unfortunately Apple does not have an option available that allows you to add an event repeating on the last day of the month. An "OK" way around this would be to repeat on the 1st of every month and send a reminder a day earlier. I know this is less then perfect but the only option currently available. If you happen to find a 3rd party program that allows such integration please don't hesitate to mention it here as I have been looking for this sort of option for quite some time now!
-
FI : Finding last day of last accounting period
Hi,
In fi, I am trying to find out the last date od the last accounting period.
I.e, if december is my first accounting period, and i give 28.01.2009 , my current accounting period will be 02,so last date of last period(december 2008) would be 31.12.2008
Similalry, if December is the start of the accounting period,meaning december is accounting period 1, the, last day of the last accounting period would be: 30.11.2007.
Please let me know of function modules to:
1.Find the last period
2.find the last day of the last period
Thanks in advance..
sumitaHi,
You can try using function module LAST_DAY_IN_PERIOD_GET to get the last day in a month/period.
You might have to check with the help of FI consultant what Fiscal Variant needs to be used.
Also uou can find out the previous month by subtracting 1 from the current month ( and if month - 1 = 0 previous period is 12 ).
Regards,
Ram -
how do i get my photos back on usb after editing. i used export but after checking my photos were not back on usb?
You're really going to need to explain that. What's "USB"? Do you mean a Disk, Drive or volume connected by USB? How is your iphoto set up? What version are you using?
Regards
TD -
Hello All, yesterday afternoon I just lost all recent updates to my iCal from the last days. How can this possibly happen ??? It may have occured after I chose the Refresh function after I had problems searching my iCal for a particular event. I think my iPhone was also not properly synched in the morning but I didn't pay it much attention and opened iCal on my MacBookAir instead.
How can I prevent this from happening again?
What can I do to restore iCal with the most recent updates?Random glitch. It doesn't matter; if you didn't backup the data, then you can't recover the data.
In the future, for any 'important' data, back up that data regularly. Forward the 'important' text messages to your email. Trasnfer your photos & videos to your computer, etcetera. -
Why after the last Photoshop CC Update the Lasso Tool not more have the Backspace step backward -Fun
Why after the last Photoshop CC Update the Lasso -Tools not more have the Backspace-last-point-step-backward -Funktion?? This is terrible!!
So i can not work more. Please change immediately with a next update!! Please..Good day!
This is a user to user Forum, so you are not really addressing Adobe here, even though some Adobe employees thankfully have been dropping by.
Also I can not reproduce the issue you claim to have with 14.2 on Mac OS 10.8.5.
What is your OS?
Regards,
Pfaffenbichler -
Windows 8 Freezes after last "Lenovo Settings Update" anytime the pointer goes to a corner
After the most recent "Lenovo Settings Update", my Windows 8 freezes for a few minutes (minimum of two) anytime the pointer hits one of the hot corners. The system also freezes for a couple of minutes or less when certain apps are started or the mouse clicks on certain apps. This is a repeatable error. I can restore the system to the setpoint previous to the "Lenovo Settings Update" and everything works fine. re-Install the update and the problem comes back. The system also freezes for 5-10 seconds when an e-mail message comes in and the notification appears. Also happens under other different circumstances but the worst is when the mouse pointer goes to any "Hot Corner". I can reset the system to the last restore point and have everything work fine but anytime I go to "Lenovo Settings", it forces the update which then creates this problem.
Has anyone else seen this issue? I have all the updates for Windows 8 and Lenovo installed including all new Bios updates that are published. The model is a Lenovo ThinkPad Edge S320u (otherwise known as the "Twist". The error is repeatable in all screen modes, tablet modes and multiple monitor modes.
For now I will go back to the latest restore point but would like to see the issue resolved.
Thanks.
BobI had the exact same issue with the same computer (Thinkpad Twist)! Am very happy to have come accross this page through a web search.
After installing some updates through Lenovo Update App (because of a message that critical updates are available on the Lenovo Support App from Startscreen), my whole system would freeze for about two minutes when moving the cursor over any corner. This is very troublesome not only because it effectively disables the Windows 8 "hot corners" (which I didn't use much anyway, preferring to launch the tasks thus accessible differently), but mostly because it is necessary at times to access the corners, notably to close any document, webpage or other instance of any program that was open in full screen (which usually all of my docs/programs are, considering the Twist's small screensize...).
Afer reading rbagnall's post I first tried uninstalling updates through the Lenovo Update center. But there, once installed, updates don't seem to be removable. Why Lenovo? You can look at the list of installed updates but not make any change. Now I have followed rbagnall's advice and restored my computer with a restore point, sufficiently far back, as I didn't know exactly which update caused this. It worked! Not exactly pleasant, because I had to reinstall some programs and change some settings again, but the problem got resolved.
I went further and tried to see which update causes this by installing them one by one and seeing when the problem appears. The culprit seems to be "Display Mode Orientation Update for Windows 8". One needs to install the "Lenovo Power Management Driver" with it (which is actually listed under optional updates, whereas the Display Mode update is shown as a critical one, but the former is selected automatically when the later is chosen, and one cannot unselect it, a message appears then that it is necessary for the other update). So it could be that one as well (haven't checked whether installing it without the Display Mode update creates the same problem). In any case, once these are installed, the problem appears.
I have now restored my PC again to the restore point, and haven't installed any Lenovo update, not even the other critical one, as I don't know what it's for (Critical patch to fix TVSU UTS issue - I haven't had this issue, and any web entries on this I found dated back to 2009). In the optional updates there is also a BIOS update, which I had installed previously, but I don't know what it's for either. If there is anything terribly useful in either (or other optional updates), please tell me.
For now I have uninstalled the Lenovo Support Startscreen App (which seems to be more annoying than helpful), and will refrain from updating any Lenovo drivers from now, which seems to do more harm than good (everything was working fine before the update)... -
Hi,
I have updated IOS6 yesterday, It was amaizing but I have lost Maps. Earlier it was very easy to access on Maps as a GPS device. I was very much happy with iPhone 4S as it was working with Maps very fast and was able to provide me correct route but after this updates, I lost the maps and their stuff. I think you really need to provide us new patch which make Maps in correct usable task.
We really need GPS device to find locations, earlier it was very good but not this updated map is seriously not good.
Thank you
Riad Keshvani
Dubai - UAEThis is more of a Google issue. When they browse to Google's page that you link to, Google detects the mobile device and redirects to their "Mobile" version of their site. Their mobile version of their site doesn't have all the features of their full blown site.
This isn't about the iPhone but rather Google opting to detect a mobile device (not just an iPhone) and redirect to a different version of their site.
Contact Google and ask when they are going to add MyMaps support to their mobile device pages. -
Why is ringtone in limbo in iTunes and missing from iPhone after last iOS 6 update?
I have a ringtone that I purchased that has now disappeared from my iPhone 5 after the last iOS 6 update. If I look in iTunes (which is an abomination in itself and not intuitive in any way), in the On This iPhone tab of the iPhone page, with Tones selected on the left hand side menu,
I see the ringtone "Stewie Mom Mom Mom" grayed out with a weird circle to the left of it . I have a second ringtone that is also visible there, with no weird circle.
If I go to the Tones tab of the iPhone page, I see that Sync Tones is checked and it shows 1 tone synched...the one without the weird circle shown in Tones.jpg is actually on my iPhone, so that is the 1 tone. No matter what I do to try to manually sync the tones to my iPhone, Stewie Mom Mom Mom is never copied to the iPhone.
Can somebody please tell me how to get this orphan ringtone back on my iPhone? What does the weird circle mean? I've gone to the iTunes store on my phone and also in the iTunes app on my computer and in both places when I view the ringtone in the store, it's acting like I never purchased it. It's not like $1.29 is so much that I wouldn't pay for the ringtone again, but honestly I don't trust that the ringtone won't be orphaned again and again, and I'm not just going to keep buying it over and over. HELP!This happened to me to.
It took me a while to figure out a solution, but this may or may not work for you.
Long story short, previous versions of iTunes used the Ringtones folder to store all tones, but now iTunes uses the Tones folder.
(I had copied my library of music from one computer to another, where the old computer used an older version of iTunes. I assume most users aren't affected by this, because they normally just upgrade iTunes on their primary computer, and the upgrade process probably takes care of renaming the Ringtones folder to Tones)
For example, my media folder is set to be:
C:\Users\vincetg2\Music
so all my old tones files were in:
C:\Users\vincetg2\Music\Ringtones
but iTunes was expecting them to be in:
C:\Users\vincetg2\Music\Tones
To solve this, I moved all the files in the 'old' Ringtones folder to the 'new' Tones folder (you should create it if it's not already there):
then dragged the files into iTunes' Tones section:
and then synced (erase and sync) the tones over to my iPhone:
I hope this helps! -
After the last update of itunes I seem to have lost all the music that I had downloaded from my Cds. It was a lot of music! All I still have is the music that I had purchased in the itunes store. And before you asked. No, I did not have a backup. Never got around to do it.
Does anyone of you have an idea if and how I can maybe get my music back?
Your help is very much appreciated. Would it help if I recover my computer from an earlier date?? I am not even sure if I make sense here.Hi - I seem to have a similar problem. I was prompted to update to iPhoto 11 yesterday (don't know why yesterday, I'm in iPhoto all the time). So I followed the instructions, library updated, all existing events and albums are there. I uploaded some more pictures and created a few new albums and did some new year spring cleaning, moving stuff around etc. And I started making a calendar.
I've opened it up today, my calendar is still there as are all the new events, but the pictures are empty outlines. If I open up a picture I just get the "!" but I can still see the thumbnails showing in the slider in the bottom - I don't know if that means the source files must still be there somewhere, or if it just means it captured thumbnails yesterday.
I've gone into it via "show package contents" and there just don't seem to be any masters for an upload yesterday. I also just had a look in the last import folder, because of a comment from someone above. As I scrolled down through the folder the images were there and literally disappeared in front of me - by which I mean, the thumbnails were there as I scrolled down and then would turn into empty outlines...!
All my old folders are still there, thankfully (although they're of course the ones that are also all safely back up).
Although I have a timecapsule, my photo library is too big to keep on my hard drive, so I keep it on an external drive - so it only gets backed up when I do it manually (thanks Apple for that, I will never understand why it was designed to work - or not work - that way). So if the pictures have been lost then they are gone for good which is super-frustrating (I just got back from South Korea and was in the middle of sorting out all my shots from that trip). It seems that this can only have happened because of the update - I should have known better than to have pressed yes.
If you have any ideas, I'd be most grateful!
Regards
R
Maybe you are looking for
-
Appling Ext. Embedded Fonts to Text
Hi All, I am spinning here. I believe I am missing the intermediate step of getting/creating a font obj to apply to the text format. The TLFTextField (instance name Label) was created on stage and has _typewriter font set. It is in movieclip instance
-
After locking Portege Z930-E7S loses Wi-Fi connection
Our company purchased 3 this laptops for the top managers. All of them has the same problem with WiFi connection. When laptop is locked by Ctr-Alt-Del , then it loses conection to Wi-Fi. To reconnect it , it is necesary to reboot the laptop. In other
-
Can I use an HFU-5 control unit with an E65 with an appropriate cradle? What is the part number for the cradle?
-
Hello All! I am relatively new to creating forms within LiveCycle but I have learned quickly so bare with me on my question. I have figured out how to highlight a field when a check box is clicked on, however, I cannot get it to remove the highlight
-
PCI-6014 not recognized by Windows 2000
I recently purchased and just installed a PCI-6014 in a new Dell Optiplex running Windows 2000 (sp2, we have stayed at sp2 due to problems we have had with sp3, sp4). On this same machine I have LabVIEW 7.0 with all the bells, including NI-DAQ 7.0. W