Siri can't connect to network - broke since yesterday

I picked up my iPhone 4S launch day and since then, with the exception of a few hours on Oct 17, Siri has worked great. That is until yesterday when Siri started complaining that it can't connect to the network. It's been doing so since then, even in the middle of the night when there should be less load on the server. I've tried Wifi and 3G, neither works.
I've tried turning the phone off and on, do a reset of the phone (hold home and power) and turning Siri off and on, but nothing works. Siri is basically broken. I've read that others have gotten Siri working, but I can't. It's going on 24 hours of The Siri network being down.
How can I get Siri working?

My wife's 4S (iOS 5.0) experienced the Siri outage several days after receipt of the new phone and restoring from a backup image of her 3G iPhone. Siri was working fine for several days (well beyond the system-wide outage in October) before it mysteriously stopped working. For days she kept getting the pitiful "I'm sorry, I can't connect to the network at this time" response whenever Siri was tasked with anything at all. This occured on both 3G and WiFi connections.
I had another 4S of my own and Siri seemed to be working just fine during the same time period, from the same networks.
We tried the - turn off Siri, reset Network configuration, turn on Siri - operations as suggested previously on numerous occasions and received no positive results.
In this case service was not restored until a "Erase All Content and Settings" reset action was taken, followed by a restore from recent iTunes backup was completed. Everything seem to be working as expected now.
In hindsight I didn't appreciate being told by Apple Support that Siri was "Beta" code. I didn't pay a $100 premium on the latest hardware where Siri was actively marketed as a differentiating feature of the new phone, only to hear that it was Beta code. This sort of excuse is something that is far below the quality of support that I've come to expect from Apple, and I hope for their sake that this trend does not continue.

Similar Messages

Siri can't connect to net work

Siri keeps saying can't connect to network or says having trouble connecting to network

It's not the network. Siri doesn't seem to cache any requests (yet) so that means every single request for translation goes to the Siri servers. I think the greater idea is that, if you build up a large enough question database in the front end, you can make life easier during the back end - or, actual Siri launch.
Plus once everyone stops telling Siri "I love you" the servers will relax a bit. Try telling Siri you're not going to plug it in unless it starts talking...then see what happens.
Remember, Siri is still in beta and this is to be expected for a BETA release. When it does work, it works well! Launch day: +2

Can not connect the iTunes Store, since the last update 2 weeks ago, iOS 6.1.2 has stopped working, help me, please ....

can not connect the iTunes Store, since the last update 2 weeks ago, iOS 6.1.2 has stopped working, help me, please ....

Ok, I am having literally identical issues with Marathon Max.
I try to connect, and it says, "Itunes could not connect to the itunes store, Make sure your network connection is active and try again." I have contacted my ISP, and they ran a full check, and sayed I should be able to connect to pretty much all websites. I did the whole "ipconfig" thing and that was no help. I also tried the "msconfig" thing, and it sayed it did not recognize it as any kind of command, internal or external command or operable program or batch file. Whats strange is I can connect from another computer just fine, but when offered to upgrade itunes I declined for fear of the same thing happpening. I am tempted to just upgrade it and thus demonstrate that itunes has a flaw in their upgrade. I will save this computers diagnostics, and the other one's too, before and after the upgrade. I look forward to sending more feedback regarding this matter

Imessage wont connect using my apple id says can not connect check network conection and my network connection is fine what do i do

having trouble with imessage since i updated to the ios7 cant get it to connect to imessage when i use my apple id says can not connect check network connection and my network connection is fine does anyone know what to do to fix this

i have the same problem but i didnt update

HT4972 can't connect to network with linksys e2500

Can't connect to network with linksys E2500. Can anyone help me?

Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130?tstart=60
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

Tenant Administrator can't connect VM Network to NVGRE Gateway.

Tenant Administrator can't connect VM Network to NVGRE Gateway.
Just no "Connectivity" tab in VM Network properties when connected to VMM as Tenant Administrator...
Is it normal or a bug?

Hi, from PowerShell you should be able to add gateway to VM Network with the following command:
Add-SCVMNetworkGateway -Name <String> -VMNetwork <VMNetwork>
[-EnableBGP <Boolean> ]

All of my apple sets (iphone, ipad and computer) cannot connect the app store since yesterday, what's wrong with the app store?

All of my apple sets (iphone, ipad and computer) cannot connect the app store since yesterday, what's wrong with the app store? do you know? or do you have have the same experience?

I still have access. Must be your phone or your internet connection.

10.4.5 - mac mini can't connect to network via airport since upgrade

I've been experiencing problems since upgrading to 10.4.3. Mainly, I've noticed that I can't easily connect to our wireless home network all the time. The pattern has been that I start by shutting down my computer completely. When I start up it again, it can't connect to the network. I have to create a new profile and then it will connect. That was buggy, but at least I found a hack. However, since upgrading to 10.4.5, I can't connect to our home network at all. The Internet Connect application says that I am connected to the base station, however I can't connect to the outside world via a shell, browser or email application. Our network is secured with a WEP and the base station is a D-Link. I searched the forums for some tips, but didn't find anything. Pointers appreciated.

Be very careful about the sequence you do it. You must make sure that the airport connection is turned off (i.e. the airport menu icon looks more like a profiled eyeball without the iris than a series of lines like the towers of hanoi). Then create a new location in the Airport network preference, and make sure that these settings are there under Options
1. Keep looking for recent networks
2. Automatically add new networks to the preferred network list.
3. Change the status of Enable interference robustness.
And by default, join preferred networks in the Airport location.

Openvpn can't connect to network

hi all, I'm glad to come here, there maybe more active. so I post here, I'm use Archbang X86_64. up to date.
I want use openvpn connect some site blocked by gov, but when I use openvpn, it can't connect any web site. This is my client.conf:
client
remote 63.223.126.189 1194
redirect-gateway def1
dev tun
proto udp
resolv-retry infinite
nobind
persist-key
persist-tun
verb 3
ca ~/.openvpn/ca.crt
cert ~/.openvpn/client.crt
key ~/.openvpn/client.key
comp-lzo
The server is Cent OS 6.2 32bit, server.conf:
# Sample OpenVPN 2.0 config file for #
# multi-client server. #
# This file is for the server side #
# of a many-clients <-> one-server #
# OpenVPN configuration. #
# OpenVPN also supports #
# single-machine <-> single-machine #
# configurations (See the Examples page #
# on the web site for more info). #
# This config should work on Windows #
# or Linux/BSD systems. Remember on #
# Windows to quote pathnames and use #
# double backslashes, e.g.: #
# "C:\\Program Files\\OpenVPN\\config\\foo.key" #
# Comments are preceded with '#' or ';' #
# Which local IP address should OpenVPN
# listen on? (optional)
local x.x.x.x(my server ip)
# Which TCP/UDP port should OpenVPN listen on?
# If you want to run multiple OpenVPN instances
# on the same machine, use a different port
# number for each one. You will need to
# open up this port on your firewall.
port 1194
# TCP or UDP server?
;proto tcp
proto udp
# "dev tun" will create a routed IP tunnel,
# "dev tap" will create an ethernet tunnel.
# Use "dev tap0" if you are ethernet bridging
# and have precreated a tap0 virtual interface
# and bridged it with your ethernet interface.
# If you want to control access policies
# over the VPN, you must create firewall
# rules for the the TUN/TAP interface.
# On non-Windows systems, you can give
# an explicit unit number, such as tun0.
# On Windows, use "dev-node" for this.
# On most systems, the VPN will not function
# unless you partially or fully disable
# the firewall for the TUN/TAP interface.
;dev tap
dev tun
# Windows needs the TAP-Win32 adapter name
# from the Network Connections panel if you
# have more than one. On XP SP2 or higher,
# you may need to selectively disable the
# Windows firewall for the TAP adapter.
# Non-Windows systems usually don't need this.
;dev-node MyTap
# SSL/TLS root certificate (ca), certificate
# (cert), and private key (key). Each client
# and the server must have their own cert and
# key file. The server and all clients will
# use the same ca file.
# See the "easy-rsa" directory for a series
# of scripts for generating RSA certificates
# and private keys. Remember to use
# a unique Common Name for the server
# and each of the client certificates.
# Any X509 key management system can be used.
# OpenVPN can also use a PKCS #12 formatted key file
# (see "pkcs12" directive in man page).
ca /etc/openvpn/easy-rsa/keys/ca.crt
cert /etc/openvpn/easy-rsa/keys/server.crt
key /etc/openvpn/easy-rsa/keys/server.key # This file should be kept secret
# Diffie hellman parameters.
# Generate your own with:
# openssl dhparam -out dh1024.pem 1024
# Substitute 2048 for 1024 if you are using
# 2048 bit keys.
dh /etc/openvpn/easy-rsa/keys/dh1024.pem
# Configure server mode and supply a VPN subnet
# for OpenVPN to draw client addresses from.
# The server will take 10.8.0.1 for itself,
# the rest will be made available to clients.
# Each client will be able to reach the server
# on 10.8.0.1. Comment this line out if you are
# ethernet bridging. See the man page for more info.
server 10.8.0.0 255.255.255.0
#server 192.168.1.0 255.255.255.0
# Maintain a record of client <-> virtual IP address
# associations in this file. If OpenVPN goes down or
# is restarted, reconnecting clients can be assigned
# the same virtual IP address from the pool that was
# previously assigned.
ifconfig-pool-persist ipp.txt
# Configure server mode for ethernet bridging.
# You must first use your OS's bridging capability
# to bridge the TAP interface with the ethernet
# NIC interface. Then you must manually set the
# IP/netmask on the bridge interface, here we
# assume 10.8.0.4/255.255.255.0. Finally we
# must set aside an IP range in this subnet
# (start=10.8.0.50 end=10.8.0.100) to allocate
# to connecting clients. Leave this line commented
# out unless you are ethernet bridging.
;server-bridge 10.8.0.4 255.255.255.0 10.8.0.50 10.8.0.100
# Configure server mode for ethernet bridging
# using a DHCP-proxy, where clients talk
# to the OpenVPN server-side DHCP server
# to receive their IP address allocation
# and DNS server addresses. You must first use
# your OS's bridging capability to bridge the TAP
# interface with the ethernet NIC interface.
# Note: this mode only works on clients (such as
# Windows), where the client-side TAP adapter is
# bound to a DHCP client.
;server-bridge
# Push routes to the client to allow it
# to reach other private subnets behind
# the server. Remember that these
# private subnets will also need
# to know to route the OpenVPN client
# address pool (10.8.0.0/255.255.255.0)
# back to the OpenVPN server.
;push "route 10.8.0.1 255.255.255.0"
;push "route 192.168.20.0 255.255.255.0"
#push "route add dev ppp0 alayii.com"
#push "route del default dev ppp0"
#push "route add default dev tun0"
# To assign specific IP addresses to specific
# clients or if a connecting client has a private
# subnet behind it that should also have VPN access,
# use the subdirectory "ccd" for client-specific
# configuration files (see man page for more info).
# EXAMPLE: Suppose the client
# having the certificate common name "Thelonious"
# also has a small subnet behind his connecting
# machine, such as 192.168.40.128/255.255.255.248.
# First, uncomment out these lines:
;client-config-dir ccd
;route 192.168.40.128 255.255.255.248
# Then create a file ccd/Thelonious with this line:
# iroute 192.168.40.128 255.255.255.248
# This will allow Thelonious' private subnet to
# access the VPN. This example will only work
# if you are routing, not bridging, i.e. you are
# using "dev tun" and "server" directives.
# EXAMPLE: Suppose you want to give
# Thelonious a fixed VPN IP address of 10.9.0.1.
# First uncomment out these lines:
;client-config-dir ccd
;route 10.9.0.0 255.255.255.252
# Then add this line to ccd/Thelonious:
# ifconfig-push 10.9.0.1 10.9.0.2
# Suppose that you want to enable different
# firewall access policies for different groups
# of clients. There are two methods:
# (1) Run multiple OpenVPN daemons, one for each
# group, and firewall the TUN/TAP interface
# for each group/daemon appropriately.
# (2) (Advanced) Create a script to dynamically
# modify the firewall in response to access
# from different clients. See man
# page for more info on learn-address script.
;learn-address ./script
# If enabled, this directive will configure
# all clients to redirect their default
# network gateway through the VPN, causing
# all IP traffic such as web browsing and
# and DNS lookups to go through the VPN
# (The OpenVPN server machine may need to NAT
# or bridge the TUN/TAP interface to the internet
# in order for this to work properly).
;push "redirect-gateway def1 bypass-dhcp"
push "redirect-gateway def1"
# Certain Windows-specific network settings
# can be pushed to clients, such as DNS
# or WINS server addresses. CAVEAT:
# http://openvpn.net/faq.html#dhcpcaveats
# The addresses below refer to the public
# DNS servers provided by opendns.com.
;push "dhcp-option DNS 208.67.222.222"
;push "dhcp-option DNS 208.67.220.220"
#push "dhcp-option DNS 8.8.8.8"
#push "dhcp-option DNS 8.8.4.4"
# Uncomment this directive to allow different
# clients to be able to "see" each other.
# By default, clients will only see the server.
# To force clients to only see the server, you
# will also need to appropriately firewall the
# server's TUN/TAP interface.
client-to-client
# Uncomment this directive if multiple clients
# might connect with the same certificate/key
# files or common names. This is recommended
# only for testing purposes. For production use,
# each client should have its own certificate/key
# pair.
# IF YOU HAVE NOT GENERATED INDIVIDUAL
# CERTIFICATE/KEY PAIRS FOR EACH CLIENT,
# EACH HAVING ITS OWN UNIQUE "COMMON NAME",
# UNCOMMENT THIS LINE OUT.
;duplicate-cn
# The keepalive directive causes ping-like
# messages to be sent back and forth over
# the link so that each side knows when
# the other side has gone down.
# Ping every 10 seconds, assume that remote
# peer is down if no ping received during
# a 120 second time period.
keepalive 10 120
# For extra security beyond that provided
# by SSL/TLS, create an "HMAC firewall"
# to help block DoS attacks and UDP port flooding.
# Generate with:
# openvpn --genkey --secret ta.key
# The server and each client must have
# a copy of this key.
# The second parameter should be '0'
# on the server and '1' on the clients.
;tls-auth ta.key 0 # This file is secret
# Select a cryptographic cipher.
# This config item must be copied to
# the client config file as well.
;cipher BF-CBC # Blowfish (default)
;cipher AES-128-CBC # AES
;cipher DES-EDE3-CBC # Triple-DES
# Enable compression on the VPN link.
# If you enable it here, you must also
# enable it in the client config file.
comp-lzo
# The maximum number of concurrently connected
# clients we want to allow.
;max-clients 100
# It's a good idea to reduce the OpenVPN
# daemon's privileges after initialization.
# You can uncomment this out on
# non-Windows systems.
user nobody
group nobody
# The persist options will try to avoid
# accessing certain resources on restart
# that may no longer be accessible because
# of the privilege downgrade.
persist-key
persist-tun
# Output a short status file showing
# current connections, truncated
# and rewritten every minute.
status /var/log/openvpn-status.log
# By default, log messages will go to the syslog (or
# on Windows, if running as a service, they will go to
# the "\Program Files\OpenVPN\log" directory).
# Use log or log-append to override this default.
# "log" will truncate the log file on OpenVPN startup,
# while "log-append" will append to it. Use one
# or the other (but not both).
log /var/log/openvpn.log
log-append /var/log/openvpn.log
# Set the appropriate level of log
# file verbosity.
# 0 is silent, except for fatal errors
# 4 is reasonable for general usage
# 5 and 6 can help to debug connection problems
# 9 is extremely verbose
#verb 3
# Silence repeating messages. At most 20
# sequential messages of the same message
# category will be output to the log.
;mute 20
my openvpn.log, I cut it to today's log:
Fri Aug 24 03:17:27 2012 222.243.122.171:35730 Data Channel MTU parms [ L:1542 D:1450 EF:42 EB:135 ET:0 EL:0 AF:3/1 ]
Fri Aug 24 03:17:27 2012 222.243.122.171:35730 Local Options hash (VER=V4): '530fdded'
Fri Aug 24 03:17:27 2012 222.243.122.171:35730 Expected Remote Options hash (VER=V4): '41690919'
Fri Aug 24 03:17:27 2012 222.243.122.171:35730 TLS: Initial packet from 222.243.122.171:35730, sid=7651acff 1979bea2
Fri Aug 24 03:17:30 2012 222.243.122.171:35730 VERIFY OK: depth=1, /C=CN/ST=HN/L=HN/O=Fuckgfw/OU=changeme/CN=direct.alayii.com/name=server-ca/[email protected]
Fri Aug 24 03:17:30 2012 222.243.122.171:35730 VERIFY OK: depth=0, /C=CN/ST=HN/L=HN/O=Fuckgfw/OU=changeme/CN=direct.alayii.com/name=client/[email protected]
Fri Aug 24 03:17:31 2012 222.243.122.171:35730 Data Channel Encrypt: Cipher 'BF-CBC' initialized with 128 bit key
Fri Aug 24 03:17:31 2012 222.243.122.171:35730 Data Channel Encrypt: Using 160 bit message hash 'SHA1' for HMAC authentication
Fri Aug 24 03:17:31 2012 222.243.122.171:35730 Data Channel Decrypt: Cipher 'BF-CBC' initialized with 128 bit key
Fri Aug 24 03:17:31 2012 222.243.122.171:35730 Data Channel Decrypt: Using 160 bit message hash 'SHA1' for HMAC authentication
Fri Aug 24 03:17:32 2012 222.243.122.171:35730 Control Channel: TLSv1, cipher TLSv1/SSLv3 DHE-RSA-AES256-SHA, 1024 bit RSA
Fri Aug 24 03:17:32 2012 222.243.122.171:35730 [direct.alayii.com] Peer Connection Initiated with 222.243.122.171:35730
Fri Aug 24 03:17:32 2012 direct.alayii.com/222.243.122.171:35730 MULTI: Learn: 10.8.0.6 -> direct.alayii.com/222.243.122.171:35730
Fri Aug 24 03:17:32 2012 direct.alayii.com/222.243.122.171:35730 MULTI: primary virtual IP for direct.alayii.com/222.243.122.171:35730: 10.8.0.6
Fri Aug 24 03:17:34 2012 direct.alayii.com/222.243.122.171:35730 PUSH: Received control message: 'PUSH_REQUEST'
Fri Aug 24 03:17:34 2012 direct.alayii.com/222.243.122.171:35730 SENT CONTROL [direct.alayii.com]: 'PUSH_REPLY,redirect-gateway def1,dhcp-option DNS 8.8.8.8,dhcp-option DNS 8.8.4.4,route 10.8.0.0 255.255.255.0,topology net30,ping 10,ping-restart 120,ifconfig 10.8.0.6 10.8.0.5' (status=1)
Fri Aug 24 03:44:44 2012 read UDPv4 [ECONNREFUSED]: Connection refused (code=111)
Fri Aug 24 03:44:53 2012 read UDPv4 [ECONNREFUSED]: Connection refused (code=111)
Fri Aug 24 03:45:03 2012 read UDPv4 [ECONNREFUSED]: Connection refused (code=111)
Fri Aug 24 03:45:13 2012 read UDPv4 [ECONNREFUSED]: Connection refused (code=111)
Fri Aug 24 03:45:22 2012 read UDPv4 [ECONNREFUSED]: Connection refused (code=111)
Fri Aug 24 03:45:23 2012 read UDPv4 [ECONNREFUSED]: Connection refused (code=111)
Fri Aug 24 03:45:25 2012 read UDPv4 [ECONNREFUSED]: Connection refused (code=111)
Fri Aug 24 03:45:30 2012 read UDPv4 [ECONNREFUSED]: Connection refused (code=111)
Fri Aug 24 03:45:39 2012 read UDPv4 [ECONNREFUSED]: Connection refused (code=111)
Fri Aug 24 03:45:49 2012 read UDPv4 [ECONNREFUSED]: Connection refused (code=111)
Fri Aug 24 03:45:59 2012 read UDPv4 [ECONNREFUSED]: Connection refused (code=111)
Fri Aug 24 03:46:09 2012 read UDPv4 [ECONNREFUSED]: Connection refused (code=111)
Fri Aug 24 03:46:19 2012 read UDPv4 [ECONNREFUSED]: Connection refused (code=111)
Fri Aug 24 03:46:29 2012 read UDPv4 [ECONNREFUSED]: Connection refused (code=111)
Fri Aug 24 03:46:40 2012 read UDPv4 [ECONNREFUSED]: Connection refused (code=111)
Fri Aug 24 03:46:49 2012 read UDPv4 [ECONNREFUSED]: Connection refused (code=111)
Fri Aug 24 03:46:59 2012 read UDPv4 [ECONNREFUSED]: Connection refused (code=111)
Fri Aug 24 03:47:09 2012 read UDPv4 [ECONNREFUSED]: Connection refused (code=111)
Fri Aug 24 03:47:19 2012 read UDPv4 [ECONNREFUSED]: Connection refused (code=111)
Fri Aug 24 03:47:30 2012 read UDPv4 [ECONNREFUSED]: Connection refused (code=111)
Fri Aug 24 03:47:40 2012 read UDPv4 [ECONNREFUSED]: Connection refused (code=111)
Fri Aug 24 03:47:47 2012 read UDPv4 [ECONNREFUSED]: Connection refused (code=111)
Fri Aug 24 03:47:48 2012 read UDPv4 [ECONNREFUSED]: Connection refused (code=111)
Fri Aug 24 03:47:48 2012 read UDPv4 [ECONNREFUSED]: Connection refused (code=111)
Fri Aug 24 03:47:49 2012 read UDPv4 [ECONNREFUSED]: Connection refused (code=111)
Fri Aug 24 03:47:49 2012 read UDPv4 [ECONNREFUSED]: Connection refused (code=111)
Fri Aug 24 03:47:49 2012 read UDPv4 [ECONNREFUSED]: Connection refused (code=111)
Fri Aug 24 03:47:49 2012 read UDPv4 [ECONNREFUSED]: Connection refused (code=111)
Fri Aug 24 03:47:50 2012 read UDPv4 [ECONNREFUSED]: Connection refused (code=111)
Fri Aug 24 03:47:51 2012 read UDPv4 [ECONNREFUSED]: Connection refused (code=111)
Fri Aug 24 03:47:51 2012 read UDPv4 [ECONNREFUSED]: Connection refused (code=111)
Fri Aug 24 03:47:53 2012 read UDPv4 [ECONNREFUSED]: Connection refused (code=111)
Fri Aug 24 03:47:55 2012 read UDPv4 [ECONNREFUSED]: Connection refused (code=111)
Fri Aug 24 03:47:56 2012 read UDPv4 [ECONNREFUSED]: Connection refused (code=111)
Fri Aug 24 03:47:57 2012 read UDPv4 [ECONNREFUSED]: Connection refused (code=111)
Fri Aug 24 03:48:03 2012 read UDPv4 [ECONNREFUSED]: Connection refused (code=111)
Fri Aug 24 03:48:05 2012 read UDPv4 [ECONNREFUSED]: Connection refused (code=111)
Fri Aug 24 03:48:07 2012 read UDPv4 [ECONNREFUSED]: Connection refused (code=111)
Fri Aug 24 03:48:13 2012 read UDPv4 [ECONNREFUSED]: Connection refused (code=111)
Fri Aug 24 03:48:15 2012 read UDPv4 [ECONNREFUSED]: Connection refused (code=111)
Fri Aug 24 03:48:17 2012 read UDPv4 [ECONNREFUSED]: Connection refused (code=111)
Fri Aug 24 03:48:23 2012 read UDPv4 [ECONNREFUSED]: Connection refused (code=111)
Fri Aug 24 03:48:25 2012 read UDPv4 [ECONNREFUSED]: Connection refused (code=111)
Fri Aug 24 03:48:27 2012 read UDPv4 [ECONNREFUSED]: Connection refused (code=111)
Fri Aug 24 03:48:28 2012 read UDPv4 [ECONNREFUSED]: Connection refused (code=111)
Fri Aug 24 03:48:29 2012 read UDPv4 [ECONNREFUSED]: Connection refused (code=111)
Fri Aug 24 03:48:30 2012 read UDPv4 [ECONNREFUSED]: Connection refused (code=111)
Fri Aug 24 03:48:33 2012 read UDPv4 [ECONNREFUSED]: Connection refused (code=111)
Fri Aug 24 03:48:34 2012 read UDPv4 [ECONNREFUSED]: Connection refused (code=111)
Fri Aug 24 03:48:34 2012 read UDPv4 [ECONNREFUSED]: Connection refused (code=111)
Fri Aug 24 03:48:35 2012 read UDPv4 [ECONNREFUSED]: Connection refused (code=111)
Fri Aug 24 03:48:37 2012 read UDPv4 [ECONNREFUSED]: Connection refused (code=111)
Fri Aug 24 03:48:40 2012 direct.alayii.com/222.243.122.171:35730 [direct.alayii.com] Inactivity timeout (--ping-restart), restarting
Fri Aug 24 03:48:40 2012 direct.alayii.com/222.243.122.171:35730 SIGUSR1[soft,ping-restart] received, client-instance restarting
openvpn-status.log
OpenVPN CLIENT LIST
Updated,Fri Aug 24 03:48:00 2012
Common Name,Real Address,Bytes Received,Bytes Sent,Connected Since
direct.alayii.com,222.243.122.171:35730,1610365,1800148,Fri Aug 24 03:17:27 2012
ROUTING TABLE
Virtual Address,Common Name,Real Address,Last Ref
10.8.0.6,direct.alayii.com,222.243.122.171:35730,Fri Aug 24 03:47:57 2012
GLOBAL STATS
Max bcast/mcast queue length,0
END
I change udp to tcp, not make sense.

I have the same issue here no Service on AT&T and no touch ID, Help Apple

Ipad can not connect to network

Can not connect to Internet

Does the iPad connect to other networks?
Does the iPad see the network?
Any error messages?
Do other devices now connect?
Did the iPad connect before?
Try the following to rule out a software problem:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on the router
- Reset network settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- iOS: Recommended settings for Wi-Fi routers and access points
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

Have a t-mobile account. Can't connect to network in France.

Nokia Lumia 820. Connected OK for 14 hr after crossing channel but unable to since. Sim works fine still in someone else's phone. Tried tweeting for help but no reply from EE after 16 hr. Phoned 150 on someone else's phone and waited 20 min before spoke to someone then put on hold and cut off. Didn't make any changes to phone before stopped connecting, in fact was driving at the time. Can search and find networks but not connect to any. Have tried everything can think of or find on net including full factory reset. Can access wifi but no mobile network. Any help appreciated.

Supposed to and was connected for first 14 hrs approx after arriving in France. Have phoned support again though on a relative's phone and they checked and discovered voice and data roaming got switched off somehow. They couldn't explain why and nothing to do with me because was driving for 9 hrs and not handling phone at all when it happened. Told me they'd switched it back on but could take up to 24 hr to activate so just waiting to see now.

Can't connect to Network Printer

I just bought a laptop with Vista. I have wireless router connected to a wired router. My two desktops are conneted to the wired router and the laptop is wireless to the wireless router.
My printer does not have a wireless card, so I have it plugged to one desktop, and I have the other desktop using it as a network printer.
I can't seem to get the wireless to see the printer. I have enabled file & print sharing on all computers, and the print spooler service is started on all computers. When I do "Add a printer" it doesn't see the printer. I tried doing "Add a network printer" and entering the name as \\computername\printername (where computername is the computer the printer is attached to), but I alternately get these two errors:
"Windows cannot connect to the printer. The server print spooler service is not running. Please restart the spooler on the server or restart the server machine" or
"Windows cannot connect to the printer. Makes ure that you have typed the name correctly, and that the printer is connected to network."
I have not been able to see the desktop computer at all in the network options, but I do see the wired router listed, but no computers connected to the router.
Can anyone help with this? I am at my wit's end. Dan

"Windows cannot connect to the printer. The server print spooler service is not running. Please restart the spooler on the server or restart the server machine" or
see the tail end of my thread here, it sounds a LOT like your problems and my own are similar:
http://social.technet.microsoft.com/Forums/en/w7itpronetworking/thread/7ab3e2a9-832c-4504-8d97-c7199bcc207e
Hello,
http://support.microsoft.com/default.aspx?scid=kb;en-US;2388142
Might be the right hotfix!
I will be trying this hotfix this week. I have this problem SO bad right now. The only slight difference is that my print server is running Microsoft Storage Server
2003, and all my clients are now windows 7. The problem hits users at seemingly random times, random 5% of the company per day, and all printer pools...it made no sense at all!
I'll keep you posted as to whether the asyncronous RPC reg key helps, or if your hotfix does.
There is also something i found that works (for 48 hours straight anyways):
On vista/7 client, go to Devices and Printers and click Add Printer
Then choose Local Printer. I know your printer is shared on a print server, just stick with me here!!
Choose Create New Port and select Local Port...
When it asks you for a port name, type in the UNC ADDRESS of the printer (ie \\printserver1\HPLaser5000n).
When it asks you for a driver, point it to the right location where you downloaded a clean set of drivers matching your client OS and printer. Or press the Windows Update button.
finish adding the printer. You will notice the name of the printer doesn't have a "...on [printserver1"
anymore, BUT it will still print!!
I have done this for 4 printer pools and for the last 2 days the 1 user i set it up for has had no printing problems. May be total coincidence, but at this point i was willing to try anything. I'm not sure if this constitutes fooling windows 7 into setting
up a remote printer as a local printer, and i'm also doubting this will be deployable via GPO or script...but still, i hope it helps.
-Dane

Can't connect to network drive in Homehub.

Hi,
I want to connect to a USB stick plugged into the back of my BT Homehub so I can use it to wirelessly back up my mac with TM. I have plugged it in, but when trying to map the drive, I get 'This file server is available on your computer. Access the volumes and files locally.'. The drive can't be accessed locally with the 'Network' in Finder because it's not mapped, so I get an empty Network folder and I can't connect it. I've used afp and SMB, but both return either 'This doesn't exist' or 'This file server is available on your computer. Access the volumes and files locally.'.
HELP?
Tony

Actually, on second thoughts, TM drives have to be Mac OS Extended format, and Homehub only works with FAT32 drives so it wouldn't work anyway. Oh well.

[solved] Can't connect to network with 64-bit kernel

On 64-bit Arch Linux, I can't get any network access. On 32-bit Arch Linux, I can connect to my router with an ethernet cable or a wireless card using dhcpcd or networkmanager.
In 64-bit, I have tried
- Upgrading my kernel from 3.3.8 to 3.4.2 from the testing repos
- Getting networkmanager-git from AUR
- Using the r8168 driver for my ethernet card (which is actually exactly the same one as the one from https://wiki.archlinux.org/index.php/Co … k_messages )
But I haven't been able to get "dhcpcd eth0" to tell me anything but
dhcpcd[677]: eth0: sending IPv6 Router Solicitation
dhcpcd[677]: eth0: broadcasting for a lease
dhcpcd[677]: eth0: sending IPv6 Router Solicitation
dhcpcd[677]: eth0: sending IPv6 Router Solicitation
dhcpcd[677]: eth0: sending IPv6 Router Solicitation
dhcpcd[677]: eth0: no IPv6 Routers available
while "dmesg | tail" fills with
eth0: no IPv6 routers present
eth0: no IPv6 routers present
eth0: no IPv6 routers present
My rc.conf has the correct settings for dhcp:
interface=eth0
address=
netmask=
broadcast=
gateway=
I can get whatever 64-bit packages I need to get the internet to work in 64-bit linux by downloading them in 32-bit linux and then upgrading to 64-bit linux.
My goal is to get networking to work on 64-bit linux through either eth0 or wlan0 (eventually I'll need wlan0 but right now neither works, so if one starts working, the other probably will), or for someone to say "It's impossible dude, go download opensuse and see if you get a different damning error over there".
Happy trails,
jc
Last edited by jc (2012-06-13 23:21:31)

ewaller wrote:Are you doing this on the same computer with different kernels?
Yep.
Are you sharing /etc between the 32 and 64 bit kernels?
Yes. Networking doesn't work on the 64-bit install disk either though, which obviously doesn't share its /etc with anything.
Can you post your 64 bit system's /etc/dhcpcd.conf file?
hostname
option domain_name_servers, domain_name, domain_search, host_name
option classless_static_routes
option ntp_servers
option interface_mtu
require dhcp_server_identifier
nohook lookup-hostname
noipv4ll
On your 64 bit system, what is the output of ip addr
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000
link/ether 14:da:e9:0f:69:85 brd ff:ff:ff:ff:ff:ff
inet6 fe80::16da:e9ff:fe0f:6985/64 scope link
valid_lft forever preferred_lft forever
3: wlan0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc mq state DOWN qlen 1000
link/ether e0:69:95:d3:7e:e9 brd ff:ff:ff:ff:ff:ff
What is the version of your 32 bit kernel?
3.3.8
Have you tried dhclient instead of dhcpcd ?
I have. No cake.

Can't connect to network 8.0.1

I just updated my iPhone 6 to 8.0.1. AT&T
Now I can't connect to the network and the TouchID stopped working. It just doesn't register anything.
Is a backup & restore in order? Rebooting does not do anything.

I have the same issue here no Service on AT&T and no touch ID, Help Apple

Siri can't connect to network - broke since yesterday

Similar Messages

Maybe you are looking for