Siri Settings Tab is missing?

I turned Siri off about a month and a half ago after it eating my battery away, but I thought it was time to start using it again. I went to the general tab to find my Siri is missing. Below is a picture to prove it.
And here is a shot of the Location Services to show that I do indeed own a 4S.
I will probably do a reset/restore tonight some time, but I just wanted to know if this is a known problem or bug.
Any feedback is appreciated, thanks.

If not restricted, try a reset... press the home and sleep/lock buttons until you see the Apple logo, ignoring the slider. Takes about 5-15 secs of button holding and you won't lose any data or settings.

Similar Messages

  • Siri menu tab is missing

    Hi at all,
    after the install iOS 8 and reload my backup, SIRI is missing in the Settings Tab.
    These error is on both devices iPad-Air and iPhone6.
    Has anyone an idea how i can reactivate the menu in settings without a reinstall?
    thanks
    Alex

    Hi ajorde,
    I apologize, I'm a bit unclear on the exact nature of your question. As outlined below, in iOS 8 the settings for Siri are listed in Settings > General > Siri:
    Siri settings - iPhone
    Regards,
    - Brenden

  • My data tab is missing in settings on ipad

    My data tab is missing in "settings" on my ipad

    What iOS version do you use? I'm nof familiar with the "data tab." Where did you notice it before?

  • Missing print settings tab in lightroom

    Anyone know how to get the print settings tab in lightroom?  I have the page setup tab--but not the print settings tab.

    I was watching Julianne Koss on AdobeTV talking about printing in Lightroom 5.  The left bottom part of her screen has two “tabs”—one says “page set up” and one says print settings.  On my screen I only have “page setup”.  A great deal of her talk is about Print Settings—this is where you choose the printer, the presets, the copies, the pages, the print settings, media type, color, color settings, print quality---pretty much everything having to do with printing.   I don’t have that tab…VERY  frustrating!
    Hers looks like the first attached photo  (see tabs that say page setup and print settings)
    Mine looks like the second attached photo  (see only page setup tab)
    Thank you for your help.
    Take care,
    Maren Aberle
    <http://www.firsttracksphotography.com/> www.firsttracksphotography.com
                               logo capture 2

  • Print Settings tab in the Print module is missing? (Windows 7)

    The "How To" books always refer you to the Print Settings tab in the print module, but there isn't one in my Lightroom? How do I get around this?

    Not sure which "How to" books you're referring to so hard to answer this.  Which specific settings are you wanting to change/control?
    (..but if it's actual settings within the Printer's control software then it's accessed by clicking on the printer button at the bottom of the panel.)

  • Account assignment tab is missing in PR(item details)

    Hi
    When we create PR,we select 'K' in the Account assignment in the item overview details,which will allow us to fill the details for G/L account and cost center in the item details,but to surprise account assignment tab is missing ,even we checked the layout settings also,No clue on this.
    Is something am i missing or any problem.
    Thanks
    Lily

    Hi Seema
    Yes,you are right,after giving Account assignment category also it is not displaying
    that tabb in item details.but for all users it is able to diplay,only one user is having this problem,is there any particular setting for this in the user or some layout settings?
    Thanks
    Lily

  • Settings Tab??

    To set the iPod Shuffle to use the iTunes volume settings, the help manual provides the following instructions (p.17), which I've followed up to the Settings Tab part:
    1. In iTunes, choose iTunes > Preferences if you are using a Mac,
    2 Click Playback and select Sound Check.
    Done.
    To set iPod shuffle to use the iTunes volume settings:
    1 Connect iPod shuffle to your computer.
    2 In iTunes, select iPod shuffle in the Source pane.
    Done.
    3 Click the Settings tab.
    Ok, what Settings Tab? I've gone through every pull-down menu, scoured the iTunes screen, right clicked, left clicked all over the place, and I do not see a Settings Tab. The help manual refers to the Settings Tab several times, but there is no visual to indicate just where the Settings Tab is!!
    Please help. I feel really stupid because I'm sure I'm missing something obvious. However, I've encountered several instances in which the Apple folks describe a feature or function and (incorrectly) assume that everyone knows what they're talking about.
    Uh oh. I'm on the verge of a rant. All I really need is help finding the darn Settings Tab for my nifty new 2gen Shuffle!
    Thank you!
    Mary
    powerbook Mac OS X (10.3.9)
    powerbook   Mac OS X (10.3.9)  

    To set iPod shuffle to use the iTunes volume
    settings:
    1 Connect iPod shuffle to your computer.
    2 In iTunes, select iPod shuffle in the Source pane.
    Done.
    3 Click the Settings tab.
    Ok, what Settings Tab? I've gone through every
    pull-down menu, scoured the iTunes screen, right
    clicked, left clicked all over the place, and I do
    not see a Settings Tab. The help manual refers to
    the Settings Tab several times, but there is no
    visual to indicate just where the Settings Tab is!!
    Please help. I feel really stupid because I'm sure
    I'm missing something obvious. However, I've
    encountered several instances in which the Apple
    folks describe a feature or function and
    (incorrectly) assume that everyone knows what they're
    talking about.
    Uh oh. I'm on the verge of a rant. All I really
    need is help finding the darn Settings Tab for my
    nifty new 2gen Shuffle!
    Hold on... When you click on the shuffle under Devices, what happens? Do you see a screen that's labeled "Contents"? If so, look at the top of that screen and click on the tab to the left of the "Contents" title that says Settings...

  • HT4623 The 'software update' tab is missing from the General menu. How do I get it reinstalled?

    Software Update tab is missing from General settings. How do I fix this.  I NEED TO LOAD NEW new a new iOS

    If you have an iPad 1, the max iOS is 5.1.1. For newer iPads, the current iOS is 6.1.3. The Settings>General>Software Update only appears if you have iOS 5.0 or higher currently installed.
    iOS 5: Updating your device to iOS 5 or Later
    http://support.apple.com/kb/HT4972
    How to install iOS 6
    http://www.macworld.com/article/2010061/hands-on-with-ios-6-installation.html
    iOS: How to update your iPhone, iPad, or iPod touch
    http://support.apple.com/kb/HT4623
    If you are currently running an iOS lower than 5.0, connect the iPad to the computer, open iTunes. Then select the iPad under the Devices heading on the left, click on the Summary tab and then click on Check for Update.
    Tip - If connected to your computer, you may need to disable your firewall and anitvirus software temporarily.  Then download and install the iOS update. Be sure and backup your iPad before the iOS update. After you update an iPad (except iPad 1) to iOS 6.x, the next update can be installed via wifi (i.e., not connected to your computer).
    Tip 2 - If you're updating via wifi, place your iPad close to your router to preclude getting a corrupted download.
     Cheers, Tom

  • HT4571 Cellular data tab is missing on my iPad

    The cellular data tab is missing on my iPad.  Given advice on other community threads, I just completely restored my iPad.  The cellular data tab is still not appearing.  What should I do?

    To determine your iPad model,
    type in your serial number from Settings > General > About
    https://selfsolve.apple.com/agreementWarrantyDynamic.do

  • 'Project Cycle' tab is missing ...

    Hi,
    In t_code solar_project_admin I go to the 'System Landscape' tab, and then the 'Project Cycle' tab is missing ... exist only : Systems , Central Objects and IMG Projects tab.
    Can any one of you help me in this regard.
    Thanks
    Venu Madhav

    I had the same problem. Actually Jason is right, it's called "Change Requests" now. If you don't see that tab as well, go to SPRO --> SAP Solution Manager Implementation Guide --> SAP Solution Manager --> Configuration --> Scenario-Specific Settings --> Change Request Management --> Standard Configuration --> General Activities --> Activate Integration with Change Request Management:
    1.) "Activate Change Request Management and Set-Up Client" --> set your CHARM client
    2.) "Integration Solution Manager" --> Enter application S (Change Request Management) and destination NONE
    --> IMG documentation says something it's not required nevertheless this entry must be maintained
    3.) "Integration Change Request Management" --> enter
    Appl                         +              Dest          +              +
    CHARM                     W     NONE     CUST620     1.0
    CHARM_DEST     W     NONE     CUST620     1.0
    --> not documentated properly in the IMG documentation as well
    For me, is was especially 2.). After I made that entry, I had the tab "Change Requests" ... and new problems ...
    Cheers,
    Andy

  • BI Content Tab goes missing in between the Project

    Hi Experts,
    I have been finding a very strange behaviour in the BI 7 System of late. The BI Content tab has gone missing suddenly and its been more than a week till now. We have been installing and activating BI Objects regularly and suddenly one day its gone blank. I am a Tech Manager and was surprised when my consultant told me that BI Content tab is missing. I wanted to check if anyone else has faced this problem and if so whats the way out. Pls also let me know what are the reasons behind this so as to not repeat these mistakes in future. Would appreciate an immediate response - Swami.

    Swami,
    This is surprising.
    Check, whether you are able to access BI content from menu (RSA1->Goto-> Install BI Content)
    Adjust the screen resolution and check whether the BI content tab is hidden.
    Also check in tcode : RSORBCT.
    Ravi

  • Excise TAB is missing in MIGO

    I had captured vendor excise invoice against PO in J1IEX
    Later while doing GR, I had selected Refer excise invoice by drilldown.The excise value flows correctly which were captured before.
    When i had posted GR & trying to see display of GR ,Excise tab is missing there.
    It creates problem because while rejecting the material against that particular GR we don't understand while excise is captured against this or not...
    What will be solution for it.
    Process flow
    J1IEX-Capture excise invoice against PO.& then MIGO
    Regards,

    Hi,
    As per the process you have mentioned I understand that you have completed the Excise capture using J1IEX & Part 1 using MIGO where you have referred the captured excise invoice.
    Now post the excise invoice using J1IEX & then check your Material document using MIGO transaction whether excise invoice getting displayed.
    I hope this is the way we process an excise invoice in a 3 step method (Capture-Refer(Part 1)-Post).
    Hope its clear.
    Regards,

  • Unable to view settings tab in one GPO. "An error occurred while generating report: Object reference not set to an instance of an object."

    I am the owner of this GPO and I can view the settings tab in any other GPO. But, I get the following message when I try to view the settings tab in one particular GPO:
    An error occurred while generating report:
    Object reference not set to an instance of an object.
    Other posts I look at reference the same error, but with different circumstances, and thus, they specify that the hotfix is for to fix the error under
    those circumstances.
    I'm accessing GPMC on a Win 7 SP1 machine. DC is Server 2012 Standard.

    > Since I have to go through Edit to see the settings, and peruse the
    > entire massive folder of settings to try to identify the bad one, it has
    > been slow-going and I haven't found it yet.
    You can filter ADM templates to show configured ones only, and you can
    use the "show all settings" node. This will speed the work up - a little
    bit at least :)
    Martin
    Mal ein
    GUTES Buch über GPOs lesen?
    NO THEY ARE NOT EVIL, if you know what you are doing:
    Good or bad GPOs?
    And if IT bothers me - coke bottle design refreshment :))

  • The New Tab button on the right side of the last tab is missing.How do I get it back?

    The New Tab button on the right side of the last tab is missing on the Tab bar How do I get it back?

    For now, you can try using Ctrl + t to open new tabs if you can't open them otherwise, but try right clicking the tabs bar, clicking "customize," and then in the window that comes up try clicking the "restore default set" button. I don't know if it will work in your case but it wouldn't hurt to try.

  • Content Administration Tab is missing for administrator user in  NW CE 7.1

    we have a issue after upgrading the portal to NW CE 7.1 SP00 RTC.
    "Content Administration" Tab is missing for administrator users

    In CE version, we have to manually enable by using "Content Layer Tool"
                  http://<host>:<port>/irj/servlet/prt/portal/prteventname/HtmlbEvent/prtroot/com.sap.portal.content.layers.ContentLayersTool
    This link may lead to "Portal Runtime Error" because "contentLayerTool" is port of high_safety zone
    To access without runtime error, pls follow the below process.
    1. login http://<host>:<port>/irj with admin user
    2. concatenate the below line to browser
        /servlet/prt/portal/prteventname/HtmlbEvent/prtroot/com.sap.portal.content.layers.ContentLayersTool
    3. To enable content admin tab click "Activate Development Mode"

Maybe you are looking for